This PR fixes a long standing bug where submitting jobs with changes
to connect services would not trigger updates as expected. Previously,
service blocks were not considered as sources of destructive updates
since they could be synced with consul non-destructively. With Connect,
task group services that have changes to their connect block or to
the service port should be destructive, since the network plumbing of
the alloc is going to need updating.
Fixes#8596#7991
Non-destructive half in #7192
Since CPU resources are usually a soft limit it is desirable to allow
setting it as low as possible to allow tasks to run only in "idle" time.
Setting it to 0 is still not allowed to avoid potential unintentional
side effects with allowing a zero value. While there may not be any side
effects this commit attempts to minimize risk by avoiding the issue.
This does *not* change the defaults.
When defining a script-check in a group-level service, Nomad needs to
know which task is associated with the check so that it can use the
correct task driver to execute the check.
This PR fixes two bugs:
1) validate service.task or service.check.task is configured
2) make service.check.task inherit service.task if it is itself unset
Fixes#8952
When consul.allow_unauthenticated is set to false, the job_endpoint hook validates
that a `-consul-token` is provided and validates the token against the privileges
inherent to a Consul Service Identity policy for all the Connect enabled services
defined in the job.
Before, the check was assuming the service was of type sidecar-proxy. This fixes the
check to use the type of the task so we can distinguish between the different connect
types.
This PR adds initial support for running Consul Connect Ingress Gateways (CIGs) in Nomad. These gateways are declared as part of a task group level service definition within the connect stanza.
```hcl
service {
connect {
gateway {
proxy {
// envoy proxy configuration
}
ingress {
// ingress-gateway configuration entry
}
}
}
}
```
A gateway can be run in `bridge` or `host` networking mode, with the caveat that host networking necessitates manually specifying the Envoy admin listener (which cannot be disabled) via the service port value.
Currently Envoy is the only supported gateway implementation in Consul, and Nomad only supports running Envoy as a gateway using the docker driver.
Aims to address #8294 and tangentially #8647
* nomad/structs/structs: add to Job.Validate
* Update nomad/structs/structs.go
Co-authored-by: Mahmood Ali <mahmood@hashicorp.com>
* nomad/structs/structs: match error strings to the config file
* nomad/structs/structs_test: clarify the test a bit
* nomad/structs/structs_test: typo in the test error comparison
Co-authored-by: Mahmood Ali <mahmood@hashicorp.com>
Deployments should wait until kicked off by `Job.Register` so that we can
assert that all regions have a scheduled deployment before starting any
region. This changeset includes the OSS fixes to support the ENT work.
`IsMultiregionStarter` has no more callers in OSS, so remove it here.
It's supposed to be possible for a region not to have `datacenters` set so
that it can use the job's `datacenters` field. This requires that operators
use the same DC name across multiple regions, but that's the default client
configuration.
The scheduler returns a very strange error if it detects a port number
out of range. If these would somehow make it to the client they would
overflow when converted to an int32 and could cause conflicts.
This PR adds the capability of running Connect Native Tasks on Nomad,
particularly when TLS and ACLs are enabled on Consul.
The `connect` stanza now includes a `native` parameter, which can be
set to the name of task that backs the Connect Native Consul service.
There is a new Client configuration parameter for the `consul` stanza
called `share_ssl`. Like `allow_unauthenticated` the default value is
true, but recommended to be disabled in production environments. When
enabled, the Nomad Client's Consul TLS information is shared with
Connect Native tasks through the normal Consul environment variables.
This does NOT include auth or token information.
If Consul ACLs are enabled, Service Identity Tokens are automatically
and injected into the Connect Native task through the CONSUL_HTTP_TOKEN
environment variable.
Any of the automatically set environment variables can be overridden by
the Connect Native task using the `env` stanza.
Fixes#6083
If `max_parallel` is not set, all regions should begin in a `running` state
rather than a `pending` state. Otherwise the first region is set to `running`
and then all the remaining regions once it enters `blocked. That behavior is
technically correct in that we have at most `max_parallel` regions running,
but definitely not what a user expects.
* scheduler/reconcile: set FollowupEvalID on lost stop_after_client_disconnect
* scheduler/reconcile: thread follupEvalIDs through to results.stop
* scheduler/reconcile: comment typo
* nomad/_test: correct arguments for plan.AppendStoppedAlloc
* scheduler/reconcile: avoid nil, cleanup handleDelayed(Lost|Reschedules)
* jobspec, api: add stop_after_client_disconnect
* nomad/state/state_store: error message typo
* structs: alloc methods to support stop_after_client_disconnect
1. a global AllocStates to track status changes with timestamps. We
need this to track the time at which the alloc became lost
originally.
2. ShouldClientStop() and WaitClientStop() to actually do the math
* scheduler/reconcile_util: delayByStopAfterClientDisconnect
* scheduler/reconcile: use delayByStopAfterClientDisconnect
* scheduler/util: updateNonTerminalAllocsToLost comments
This was setup to only update allocs to lost if the DesiredStatus had
already been set by the scheduler. It seems like the intention was to
update the status from any non-terminal state, and not all lost allocs
have been marked stop or evict by now
* scheduler/testing: AssertEvalStatus just use require
* scheduler/generic_sched: don't create a blocked eval if delayed
* scheduler/generic_sched_test: several scheduling cases
Part of #6120
Building on the support for enabling connect proxy paths in #7323, this change
adds the ability to configure the 'service.check.expose' flag on group-level
service check definitions for services that are connect-enabled. This is a slight
deviation from the "magic" that Consul provides. With Consul, the 'expose' flag
exists on the connect.proxy stanza, which will then auto-generate expose paths
for every HTTP and gRPC service check associated with that connect-enabled
service.
A first attempt at providing similar magic for Nomad's Consul Connect integration
followed that pattern exactly, as seen in #7396. However, on reviewing the PR
we realized having the `expose` flag on the proxy stanza inseperably ties together
the automatic path generation with every HTTP/gRPC defined on the service. This
makes sense in Consul's context, because a service definition is reasonably
associated with a single "task". With Nomad's group level service definitions
however, there is a reasonable expectation that a service definition is more
abstractly representative of multiple services within the task group. In this
case, one would want to define checks of that service which concretely make HTTP
or gRPC requests to different underlying tasks. Such a model is not possible
with the course `proxy.expose` flag.
Instead, we now have the flag made available within the check definitions themselves.
By making the expose feature resolute to each check, it is possible to have
some HTTP/gRPC checks which make use of the envoy exposed paths, as well as
some HTTP/gRPC checks which make use of some orthongonal port-mapping to do
checks on some other task (or even some other bound port of the same task)
within the task group.
Given this example,
group "server-group" {
network {
mode = "bridge"
port "forchecks" {
to = -1
}
}
service {
name = "myserver"
port = 2000
connect {
sidecar_service {
}
}
check {
name = "mycheck-myserver"
type = "http"
port = "forchecks"
interval = "3s"
timeout = "2s"
method = "GET"
path = "/classic/responder/health"
expose = true
}
}
}
Nomad will automatically inject (via job endpoint mutator) the
extrapolated expose path configuration, i.e.
expose {
path {
path = "/classic/responder/health"
protocol = "http"
local_path_port = 2000
listener_port = "forchecks"
}
}
Documentation is coming in #7440 (needs updating, doing next)
Modifications to the `countdash` examples in https://github.com/hashicorp/demo-consul-101/pull/6
which will make the examples in the documentation actually runnable.
Will add some e2e tests based on the above when it becomes available.
- tg.Count defaults to tg.Scaling.Min if present (falls back on previous default of 1 if Scaling is absent)
- Validate() enforces tg.Scaling.Min <= tg.Count <= tg.Scaling.Max
modification in ApiScalingPolicyToStructs, api.TaskGroup.Validate so that defaults are handled for TaskGroup.Count and
This changeset implements the initial registration and fingerprinting
of CSI Plugins as part of #5378. At a high level, it introduces the
following:
* A `csi_plugin` stanza as part of a Nomad task configuration, to
allow a task to expose that it is a plugin.
* A new task runner hook: `csi_plugin_supervisor`. This hook does two
things. When the `csi_plugin` stanza is detected, it will
automatically configure the plugin task to receive bidirectional
mounts to the CSI intermediary directory. At runtime, it will then
perform an initial heartbeat of the plugin and handle submitting it to
the new `dynamicplugins.Registry` for further use by the client, and
then run a lightweight heartbeat loop that will emit task events
when health changes.
* The `dynamicplugins.Registry` for handling plugins that run
as Nomad tasks, in contrast to the existing catalog that requires
`go-plugin` type plugins and to know the plugin configuration in
advance.
* The `csimanager` which fingerprints CSI plugins, in a similar way to
`drivermanager` and `devicemanager`. It currently only fingerprints
the NodeID from the plugin, and assumes that all plugins are
monolithic.
Missing features
* We do not use the live updates of the `dynamicplugin` registry in
the `csimanager` yet.
* We do not deregister the plugins from the client when they shutdown
yet, they just become indefinitely marked as unhealthy. This is
deliberate until we figure out how we should manage deploying new
versions of plugins/transitioning them.
Consul provides a feature of Service Definitions where the tags
associated with a service can be modified through the Catalog API,
overriding the value(s) configured in the agent's service configuration.
To enable this feature, the flag enable_tag_override must be configured
in the service definition.
Previously, Nomad did not allow configuring this flag, and thus the default
value of false was used. Now, it is configurable.
Because Nomad itself acts as a state machine around the the service definitions
of the tasks it manages, it's worth describing what happens when this feature
is enabled and why.
Consider the basic case where there is no Nomad, and your service is provided
to consul as a boring JSON file. The ultimate source of truth for the definition
of that service is the file, and is stored in the agent. Later, Consul performs
"anti-entropy" which synchronizes the Catalog (stored only the leaders). Then
with enable_tag_override=true, the tags field is available for "external"
modification through the Catalog API (rather than directly configuring the
service definition file, or using the Agent API). The important observation
is that if the service definition ever changes (i.e. the file is changed &
config reloaded OR the Agent API is used to modify the service), those
"external" tag values are thrown away, and the new service definition is
once again the source of truth.
In the Nomad case, Nomad itself is the source of truth over the Agent in
the same way the JSON file was the source of truth in the example above.
That means any time Nomad sets a new service definition, any externally
configured tags are going to be replaced. When does this happen? Only on
major lifecycle events, for example when a task is modified because of an
updated job spec from the 'nomad job run <existing>' command. Otherwise,
Nomad's periodic re-sync's with Consul will now no longer try to restore
the externally modified tag values (as long as enable_tag_override=true).
Fixes#2057
Nomad jobs may be configured with a TaskGroup which contains a Service
definition that is Consul Connect enabled. These service definitions end
up establishing a Consul Connect Proxy Task (e.g. envoy, by default). In
the case where Consul ACLs are enabled, a Service Identity token is required
for these tasks to run & connect, etc. This changeset enables the Nomad Server
to recieve RPC requests for the derivation of SI tokens on behalf of instances
of Consul Connect using Tasks. Those tokens are then relayed back to the
requesting Client, which then injects the tokens in the secrets directory of
the Task.
This commit ensures that Alloc.AllocatedResources is properly populated
when read from persistence stores (namely Raft and client state store).
The alloc struct may have been written previously by an arbitrary old
version that may only populate Alloc.TaskResources.
Fixes#6853
Canonicalize jobs first before adding any sidecars. This fixes a bug
where sidecar tasks were added without interpolated names and broke
validation. Sidecar tasks must be canonicalized independently.
Also adds a group network to the mock connect job because it wasn't a
valid connect job before!
The existing version constraint uses logic optimized for package
managers, not schedulers, when checking prereleases:
- 1.3.0-beta1 will *not* satisfy ">= 0.6.1"
- 1.7.0-rc1 will *not* satisfy ">= 1.6.0-beta1"
This is due to package managers wishing to favor final releases over
prereleases.
In a scheduler versions more often represent the earliest release all
required features/APIs are available in a system. Whether the constraint
or the version being evaluated are prereleases has no impact on
ordering.
This commit adds a new constraint - `semver` - which will use Semver
v2.0 ordering when evaluating constraints. Given the above examples:
- 1.3.0-beta1 satisfies ">= 0.6.1" using `semver`
- 1.7.0-rc1 satisfies ">= 1.6.0-beta1" using `semver`
Since existing jobspecs may rely on the old behavior, a new constraint
was added and the implicit Consul Connect and Vault constraints were
updated to use it.
* client: improve group service stanza interpolation and check_restart support
Interpolation can now be done on group service stanzas. Note that some task runtime specific information
that was previously available when the service was registered poststart of a task is no longer available.
The check_restart stanza for checks defined on group services will now properly restart the allocation upon
check failures if configured.
Currently, using a Volume in a job uses the following configuration:
```
volume "alias-name" {
type = "volume-type"
read_only = true
config {
source = "host_volume_name"
}
}
```
This commit migrates to the following:
```
volume "alias-name" {
type = "volume-type"
source = "host_volume_name"
read_only = true
}
```
The original design was based due to being uncertain about the future of storage
plugins, and to allow maxium flexibility.
However, this causes a few issues, namely:
- We frequently need to parse this configuration during submission,
scheduling, and mounting
- It complicates the configuration from and end users perspective
- It complicates the ability to do validation
As we understand the problem space of CSI a little more, it has become
clear that we won't need the `source` to be in config, as it will be
used in the majority of cases:
- Host Volumes: Always need a source
- Preallocated CSI Volumes: Always needs a source from a volume or claim name
- Dynamic Persistent CSI Volumes*: Always needs a source to attach the volumes
to for managing upgrades and to avoid dangling.
- Dynamic Ephemeral CSI Volumes*: Less thought out, but `source` will probably point
to the plugin name, and a `config` block will
allow you to pass meta to the plugin. Or will
point to a pre-configured ephemeral config.
*If implemented
The new design simplifies this by merging the source into the volume
stanza to solve the above issues with usability, performance, and error
handling.
Nick Ethier