This PR implements Nomad built-in support for running Consul Connect
terminating gateways. Such a gateway can be used by services running
inside the service mesh to access "legacy" services running outside
the service mesh while still making use of Consul's service identity
based networking and ACL policies.
https://www.consul.io/docs/connect/gateways/terminating-gateway
These gateways are declared as part of a task group level service
definition within the connect stanza.
service {
connect {
gateway {
proxy {
// envoy proxy configuration
}
terminating {
// terminating-gateway configuration entry
}
}
}
}
Currently Envoy is the only supported gateway implementation in
Consul. The gateay task can be customized by configuring the
connect.sidecar_task block.
When the gateway.terminating field is set, Nomad will write/update
the Configuration Entry into Consul on job submission. Because CEs
are global in scope and there may be more than one Nomad cluster
communicating with Consul, there is an assumption that any terminating
gateway defined in Nomad for a particular service will be the same
among Nomad clusters.
Gateways require Consul 1.8.0+, checked by a node constraint.
Closes#9445
Most allocation hooks don't need to know when a single task within the
allocation is restarted. The check watcher for group services triggers the
alloc runner to restart all tasks, but the alloc runner's `Restart` method
doesn't trigger any of the alloc hooks, including the group service hook. The
result is that after the first time a check triggers a restart, we'll never
restart the tasks of an allocation again.
This commit adds a `RunnerTaskRestartHook` interface so that alloc runner
hooks can act if a task within the alloc is restarted. The only implementation
is in the group service hook, which will force a re-registration of the
alloc's services and fix check restarts.
Connect ingress gateway services were being registered into Consul without
an explicit deterministic service ID. Consul would generate one automatically,
but then Nomad would have no way to register a second gateway on the same agent
as it would not supply 'proxy-id' during envoy bootstrap.
Set the ServiceID for gateways, and supply 'proxy-id' when doing envoy bootstrap.
Fixes#9834
If the connect.proxy stanza is left unset, the connection timeout
value is not set but is assumed to be, and may cause a non-fatal NPE
on job submission.
* Persist shared allocated ports for inplace update
Ports were not copied over when performing inplace updates in the
generic scheduler
* changelog
* drop spew
When a client restarts, the network_hook's prerun will call
`CreateNetwork`. Drivers that don't implement their own network manager will
fall back to the default network manager, which doesn't handle the case where
the network namespace is being recreated safely. This results in an error and
the task being restarted for `exec` tasks with `network` blocks (this also
impacts the community `containerd` and probably other community task drivers).
If we get an error when attempting to create the namespace and that error is
because the file already exists and is locked by its process, then we'll
return a `nil` error with the `created` flag set to false, just as we do with
the `docker` driver.
AllocatedSharedResources were not being copied over to the new
allocation struct the scheduler makes during inplace updates. This
caused downstream issues after the plan was applied, namely the shared
ports were dropped causing issues with service
registration/deregistration.
test that shared ports are preserved
change log, also carry over shared network
copy networks
When upgrading from Nomad v0.12.x to v1.0.x, Nomad client will panic on
startup if the node is running Connect enabled jobs. This is caused by
a missing piece of plumbing of the Consul Proxies API interface during the
client restore process.
Fixes#9738
When a task is restored after a client restart, the template runner will
create a new lease for any dynamic secret (ex. Consul or PKI secrets
engines). But because this lease is being created in the prestart hook, we
don't trigger the `change_mode`.
This changeset uses the the existence of the task handle to detect a
previously running task that's been restored, so that we can trigger the
template `change_mode` if the template is changed, as it will be only with
dynamic secrets.
When we iterate over the interfaces returned from CNI setup, we filter for one
with the `Sandbox` field set. Ensure that if none of the interfaces has that
field set that we still return an available interface.
Introduce a new more-block friendly syntax for specifying mounts with a new `mount` block type with the target as label:
```hcl
config {
image = "..."
mount {
type = "..."
target = "target-path"
volume_options { ... }
}
}
```
The main benefit here is that by `mount` being a block, it can nest blocks and avoids the compatibility problems noted in https://github.com/hashicorp/nomad/pull/9634/files#diff-2161d829655a3a36ba2d916023e4eec125b9bd22873493c1c2e5e3f7ba92c691R128-R155 .
The intention is for us to promote this `mount` blocks and quietly deprecate the `mounts` type, while still honoring to preserve compatibility as much as we could.
This addresses the issue in https://github.com/hashicorp/nomad/issues/9604 .
* fix acl event creation
* allow way to access secretID without exposing it to stream
test that values are omitted
test event creation
test acl events
payloads are pointers
fix failing tests, do all security steps inside constructor
* increase time
* ignore empty tokens
* uncomment line
* changelog
This PR enables job submitters to use interpolation in the connect
block of jobs making use of consul connect. Before, only the name of
the connect service would be interpolated, and only for a few select
identifiers related to the job itself (#6853). Now, all connect fields
can be interpolated using the full spectrum of runtime parameters.
Note that the service name is interpolated at job-submission time,
and cannot make use of values known only at runtime.
Fixes#7221
* use full name for events
use evaluation and allocation instead of short name
* update api event stream package and shortnames
* update docs
* make sync; fix typo
* backwards compat not from 1.0.0-beta event stream api changes
* use api types instead of string
* rm backwards compat note that only changed between prereleases
* remove backwards incompat that only existed in prereleases
When the Docker driver kills as task, we send a request via the Docker API for
dockerd to fire the signal. We send that signal and then block for the
`kill_timeout` waiting for the container to exit. But if the Docker API
blocks, we will block indefinitely because we haven't configured the API call
with the same timeout.
This changeset is a minimal intervention to add the timeout to the Docker API
call _only_ when we have the `kill_timeout` set. Future work should examine
whether we should be threading contexts through other `go-dockerclient` API
calls.
Previously, every Envoy Connect sidecar would spawn as many worker
threads as logical CPU cores. That is Envoy's default behavior when
`--concurrency` is not explicitly set. Nomad now sets the concurrency
flag to 1, which is sensible for the default cpu = 250 Mhz resources
allocated for sidecar proxies. The concurrency value can be configured
in Client configuration by setting `meta.connect.proxy_concurrency`.
Closes#9341
* Remove Managed Sinks from Nomad
Managed Sinks were a beta feature in Nomad 1.0-beta2. During the beta
period it was determined that this was not a scalable approach to
support community and third party sinks.
* update comment
* changelog
Before, upstreams could only be defined using the default datacenter.
Now, the `datacenter` field can be set in a connect upstream definition,
informing consul of the desire for an instance of the upstream service
in the specified datacenter. The field is optional and continues to
default to the local datacenter.
Closes#8964
Fix#9210 .
This update the executor so it honors the User when using nomad alloc exec. The bug was that the exec task didn't honor the init command when execing.
This PR adds the ability to set HTTP headers when downloading
an artifact from an `http` or `https` resource.
The implementation in `go-getter` is such that a new `HTTPGetter`
must be created for each artifact that sets headers (as opposed
to conveniently setting headers per-request). This PR maintains
the memoization of the default Getter objects, creating new ones
only for artifacts where headers are set.
Closes#9306
Previously, connect sidecars would be re-registered with consul every cycle
of Nomad's reconciliation loop around Consul service registrations. This is
because part of the comparison used `reflect.DeepEqual` on []string objects,
which returns false when one object is `[]string{}` and the other is `[]string{}(nil)`.
Unforunately, this was always the case, and every Connect sidecar service
would be re-registered on every iteration, which happens every 30 seconds.
When raw_exec is configured with [`no_cgroups`](https://www.nomadproject.io/docs/drivers/raw_exec#no_cgroups), raw_exec shouldn't attempt to create a cgroup.
Prior to this change, we accidentally always required freezer cgroup to do stats PID tracking. We already have the proper fallback in place for metrics, so only need to ensure that we don't create a cgroup for the task.
Fixes https://github.com/hashicorp/nomad/issues/8565
The default behavior for `docker.volumes.enabled` is intended to be `false`,
but the HCL schema defaults to `true` if the value is unset. Set the default
literal value to `true`.
Additionally, Docker driver mounts of type "volume" (but not "bind") are not
being properly sandboxed with that setting. Disable Docker mounts with type
"volume" entirely whenever the `docker.volumes.enabled` flag is set to
false. Note this is unrelated to the `volume_mount` feature, which is
constrained to preconfigured host volumes or whatever is mounted by a CSI
plugin.
This changeset includes updates to unit tests that should have been failing
under the documented behavior but were not.
