The command line client sends a specific volume ID, but this isn't
enforced at the API level and we were incorrectly using a prefix match
for volume deregistration, resulting in cases where a volume with a
shorter ID that's a prefix of another volume would be deregistered
instead of the intended volume.
This PR exposes the following existing`consul-template` configuration options to Nomad jobspec authors in the `{job.group.task.template}` stanza.
- `wait`
It also exposes the following`consul-template` configuration to Nomad operators in the `{client.template}` stanza.
- `max_stale`
- `block_query_wait`
- `consul_retry`
- `vault_retry`
- `wait`
Finally, it adds the following new Nomad-specific configuration to the `{client.template}` stanza that allows Operators to set bounds on what `jobspec` authors configure.
- `wait_bounds`
Co-authored-by: Tim Gross <tgross@hashicorp.com>
Co-authored-by: Michael Schurter <mschurter@hashicorp.com>
## Development Environment Changes
* Added stringer to build deps
## New HTTP APIs
* Added scheduler worker config API
* Added scheduler worker info API
## New Internals
* (Scheduler)Worker API refactor—Start(), Stop(), Pause(), Resume()
* Update shutdown to use context
* Add mutex for contended server data
- `workerLock` for the `workers` slice
- `workerConfigLock` for the `Server.Config.NumSchedulers` and
`Server.Config.EnabledSchedulers` values
## Other
* Adding docs for scheduler worker api
* Add changelog message
Co-authored-by: Derek Strickland <1111455+DerekStrickland@users.noreply.github.com>
When `volumewatcher.Watcher` starts on the leader, it starts a watch
on every volume and triggers a reap of unused claims on any change to
that volume. But if a reaping is in-flight during leadership
transitions, it will fail and the event that triggered the reap will
be dropped. Perform one reap of unused claims at the start of the
watcher so that leadership transitions don't drop this event.
Some operators use very long group/task `shutdown_delay` settings to
safely drain network connections to their workloads after service
deregistration. But during incident response, they may want to cause
that drain to be skipped so they can quickly shed load.
Provide a `-no-shutdown-delay` flag on the `nomad alloc stop` and
`nomad job stop` commands that bypasses the delay. This sets a new
desired transition state on the affected allocations that the
allocation/task runner will identify during pre-kill on the client.
Note (as documented here) that using this flag will almost always
result in failed inbound network connections for workloads as the
tasks will exit before clients receive updated service discovery
information and won't be gracefully drained.
API queries can request pagination using the `NextToken` and `PerPage`
fields of `QueryOptions`, when supported by the underlying API.
Add a `NextToken` field to the `structs.QueryMeta` so that we have a
common field across RPCs to tell the caller where to resume paging
from on their next API call. Include this field on the `api.QueryMeta`
as well so that it's available for future versions of List HTTP APIs
that wrap the response with `QueryMeta` rather than returning a simple
list of structs. In the meantime callers can get the `X-Nomad-NextToken`.
Add pagination to the `Eval.List` RPC by checking for pagination token
and page size in `QueryOptions`. This will allow resuming from the
last ID seen so long as the query parameters and the state store
itself are unchanged between requests.
Add filtering by job ID or evaluation status over the results we get
out of the state store.
Parse the query parameters of the `Eval.List` API into the arguments
expected for filtering in the RPC call.
During incident response, operators may find that automated processes
elsewhere in the organization can be generating new workloads on Nomad
clusters that are unable to handle the workload. This changeset adds a
field to the `SchedulerConfiguration` API that causes all job
registration calls to be rejected unless the request has a management
ACL token.
Give ourselves some room for extension in the UI configuration block
by naming the field `ui_url`, which will let us have an `api_url`.
Fix the template path to ensure we're getting the right value from the
API.
When GetPolicy is called within the scaling handler, the index
table was being used to populate the reply index irregardless of
whether the policy was found or not. This change fixes that
behaviour so that the policy modify index is used when the policy
lookup is successful.
This change modifies the Nomad job register and deregister RPCs to
accept an updated option set which includes eval priority. This
param is optional and override the use of the job priority to set
the eval priority.
In order to ensure all evaluations as a result of the request use
the same eval priority, the priority is shared to the
allocReconciler and deploymentWatcher. This creates a new
distinction between eval priority and job priority.
The Nomad agent HTTP API has been modified to allow setting the
eval priority on job update and delete. To keep consistency with
the current v1 API, job update accepts this as a payload param;
job delete accepts this as a query param.
Any user supplied value is validated within the agent HTTP handler
removing the need to pass invalid requests to the server.
The register and deregister opts functions now all for setting
the eval priority on requests.
The change includes a small change to the DeregisterOpts function
which handles nil opts. This brings the function inline with the
RegisterOpts.
* api: return 404 for alloc FS list/stat endpoints
If the alloc filesystem doesn't have a file requested by the List
Files or Stat File API, we currently return a HTTP 500 error with the
expected "file not found" error message. Return a HTTP 404 error
instead.
* update FS Handler
Previously the FS handler would interpret a 500 status as a 404
in the adapter layer by checking if the response body contained
the text or is the response status
was 500 and then throw an error code for 404.
Co-authored-by: Jai Bhagat <jaybhagat841@gmail.com>
Enhance the CLI in order to return the host network in two flavors
(default, verbose) of the `node status` command.
Fixes: #11223.
Signed-off-by: Alessandro De Blasis <alex@deblasis.net>
Previously when creating an eval for job deregistration, the eval
priority was set to the default value irregardless of the job
priority. In situations where an operator would want to deregister
a high priority job so they could re-register; the evaluation may
get blocked for some time on a busy cluster because of the
deregsiter priority.
If a job had a lower than default priority and was deregistered,
the deregister eval would get a priority higher than that of the
job. If we attempted to register another job with a higher
priority than this, but still below the default, the deregister
would be actioned before the register.
Both situations described above seem incorrect and unexpected from
a user prespective.
This fix modifies to behaviour to set the deregister eval priority
to that of the job, if available. Otherwise the default value is
still used.
As we have continued to see reports of #9506 we need to elevate this log
line as it is the only way to detect when plans are being *erroneously*
rejected.
Users who see this log line repeatedly should drain and restart the node
in the log line. This seems to workaorund the issue.
Please post any details on #9506!
Fix a bug where the scheduler may panic when preemption is enabled. The conditions are a bit complicated:
A job with higher priority that schedule multiple allocations that preempt other multiple allocations on the same node, due to port/network/device assignments.
The cause of the bug is incidental mutation of internal cached data. `RankedNode` computes and cache proposed allocations in https://github.com/hashicorp/nomad/blob/v1.1.6/scheduler/rank.go#L42-L53 . But scheduler then mutates the list to remove pre-emptable allocs in https://github.com/hashicorp/nomad/blob/v1.1.6/scheduler/rank.go#L293-L294, and `RemoveAllocs` mutates and sets the tail of cached slice with `nil`s triggering a nil-pointer derefencing case.
I fixed the issue by avoiding the mutation in `RemoveAllocs` - the micro-optimization there doesn't seem necessary.
Fixes https://github.com/hashicorp/nomad/issues/11342
* Include region and namespace in CLI output
* Add region and prefix matching for server members
* Add namespace and region API outputs to cluster metadata folder
* Add region awareness to WaitForClient helper function
* Add helper functions for SliceStringHasPrefix and StringHasPrefixInSlice
* Refactor test client agent generation
* Add tests for region
* Add changelog
The fix seems to be related to the pointer comparison and swapping we
did around killing a non-leader. I actually can't quite explain it, but
when comparing against Consul's version of this test I noticed they used
the slice index to track the killed server instead of pointer swapping.
As soon as I switched to slice index tracking I could no longer
reproduce the failure.
In addition:
- Tested membership counts on all servers instead of just 1 for added
correctness.
- Stopped testing raft v1 because it is unsupported.
Add a new hostname string parameter to the network block which
allows operators to specify the hostname of the network namespace.
Changing this causes a destructive update to the allocation and it
is omitted if empty from API responses. This parameter also supports
interpolation.
In order to have a hostname passed as a configuration param when
creating an allocation network, the CreateNetwork func of the
DriverNetworkManager interface needs to be updated. In order to
minimize the disruption of future changes, rather than add another
string func arg, the function now accepts a request struct along with
the allocID param. The struct has the hostname as a field.
The in-tree implementations of DriverNetworkManager.CreateNetwork
have been modified to account for the function signature change.
In updating for the change, the enhancement of adding hostnames to
network namespaces has also been added to the Docker driver, whilst
the default Linux manager does not current implement it.
This fixes a bug in the event stream API where it currently interprets
namespace=* as an actual namespace, not a wildcard. When Nomad parses
incoming requests, it sets namespace to default if not specified, which
means the request namespace will never be an empty string, which is what
the event subscription was checking for. This changes the conditional
logic to check for a wildcard namespace instead of an empty one.
It also updates some event tests to include the default namespace in the
subscription to match current behavior.
Fixes#10903
When mTLS is enabled, only nomad servers of the region should access the
Raft RPC layer. Clients and servers in other regions should only use the
Nomad RPC endpoints.
Co-authored-by: Michael Schurter <mschurter@hashicorp.com>
Co-authored-by: Seth Hoenig <shoenig@hashicorp.com>
Attempt to deflake the test by avoiding shutting down the leaders, as leadership
recovery takes more time, and consequently longer to process raft configuration
changes and potentially failing the test.
When a node becomes ready, create an eval for all system jobs across
namespaces.
The previous code uses `job.ID` to deduplicate evals, but that ignores
the job namespace. Thus if there are multiple jobs in different
namespaces sharing the same ID/Name, only one will be considered for
running in the new node. Thus, Nomad may skip running some system jobs
in that node.
Fix a bug where system jobs may fail to be placed on a node that
initially was not eligible for system job placement.
This changes causes the reschedule to re-evaluate the node if any
attribute used in feasibility checks changes.
Fixes https://github.com/hashicorp/nomad/issues/8448
In a multi-task-group job, treat 0 canary groups as auto-promote.
This change fixes an edge case where Nomad requires a manual promotion,
if the job had any group with canary=0 and rest of groups having
auto_promote set.
Co-authored-by: Michael Schurter <mschurter@hashicorp.com>
This PR implements a new "System Batch" scheduler type. Jobs can
make use of this new scheduler by setting their type to 'sysbatch'.
Like the name implies, sysbatch can be thought of as a hybrid between
system and batch jobs - it is for running short lived jobs intended to
run on every compatible node in the cluster.
As with batch jobs, sysbatch jobs can also be periodic and/or parameterized
dispatch jobs. A sysbatch job is considered complete when it has been run
on all compatible nodes until reaching a terminal state (success or failed
on retries).
Feasibility and preemption are governed the same as with system jobs. In
this PR, the update stanza is not yet supported. The update stanza is sill
limited in functionality for the underlying system scheduler, and is
not useful yet for sysbatch jobs. Further work in #4740 will improve
support for the update stanza and deployments.
Closes#2527
Fix a panic in handling one-time auth tokens, used to support `nomad ui
--authenticate`.
If the nomad leader is a 1.1.x with some servers running as 1.0.x, the
pre-1.1.0 servers risk crashing and the cluster may lose quorum. That
can happen when `nomad authenticate -ui` command is issued, or when the
leader scans for expired tokens every 10 minutes.
Fixed#10943 .
Basically the same as #10896 but with the Affinity struct.
Since we use reflect.DeepEquals for job comparison, there is
risk of false positives for changes due to a job struct with
memoized vs non-memoized strings.
Closes#10897
This PR causes Nomad to no longer memoize the String value of
a Constraint. The private memoized variable may or may not be
initialized at any given time, which means a reflect.DeepEqual
comparison between two jobs (e.g. during Plan) may return incorrect
results.
Fixes#10836
When a task group with `service` block(s) is validated, we validate that there
are no duplicates, but this validation doesn't have access to the task environment
because it hasn't been created yet. Services and checks with interpolation can
be flagged incorrectly as conflicting. Name conflicts in services are not
actually an error in Consul and users have reported wanting to use the same
service name for task groups differentiated by tags.
This PR adds validation during job submission that Connect proxy upstreams
within a task group are using different listener addresses. Otherwise, a
duplicate envoy listener will be created and not be able to bind.
Closes#7833
Fix deployment watchers to avoid creating unnecessary deployment watcher goroutines and blocking queries. `deploymentWatcher.getAllocsCh` creates a new goroutine that makes a blocking query to fetch updates of deployment allocs.
## Background
When operators submit a new or updated service job, Nomad create a new deployment by default. The deployment object controls how fast to place the allocations through [`max_parallel`](https://www.nomadproject.io/docs/job-specification/update#max_parallel) and health checks configurations.
The `scheduler` and `deploymentwatcher` package collaborate to achieve deployment logic: The scheduler only places the canaries and `max_parallel` allocations for a new deployment; the `deploymentwatcher` monitors for alloc progress and then enqueues a new evaluation whenever the scheduler should reprocess a job and places the next `max_parallel` round of allocations.
The `deploymentwatcher` package makes blocking queries against the state store, to fetch all deployments and the relevant allocs for each running deployments. If `deploymentwatcher` fails or is hindered from fetching the state, the deployments fail to make progress.
`Deploymentwatcher` logic only runs on the leader.
## Why unnecessary deployment watchers can halt cluster progress
Previously, `getAllocsCh` is called on every for loop iteration in `deploymentWatcher.watch()` function. However, the for-loop may iterate many times before the allocs get updated. In fact, whenever a new deployment is created/updated/deleted, *all* `deploymentWatcher`s get notified through `w.deploymentUpdateCh`. The `getAllocsCh` goroutines and blocking queries spike significantly and grow quadratically with respect to the number of running deployments. The growth leads to two adverse outcomes:
1. it spikes the CPU/Memory usage resulting potentially leading to OOM or very slow processing
2. it activates the [query rate limiter](abaa9c5c5b/nomad/deploymentwatcher/deployment_watcher.go (L896-L898)), so later the watcher fails to get updates and consequently fails to make progress towards placing new allocations for the deployment!
So the cluster fails to catch up and fails to make progress in almost all deployments. The cluster recovers after a leader transition: the deposed leader stops all watchers and free up goroutines and blocking queries; the new leader recreates the watchers without the quadratic growth and remaining under the rate limiter. Well, until a spike of deployments are created triggering the condition again.
### Relevant Code References
Path for deployment monitoring:
* [`Watcher.watchDeployments`](abaa9c5c5b/nomad/deploymentwatcher/deployments_watcher.go (L164-L192)) loops waiting for deployment updates.
* On every deployment update, [`w.getDeploys`](abaa9c5c5b/nomad/deploymentwatcher/deployments_watcher.go (L194-L229)) returns all deployments in the system
* `watchDeployments` calls `w.add(d)` on every active deployment
* which in turns, [updates existing watcher if one is found](abaa9c5c5b/nomad/deploymentwatcher/deployments_watcher.go (L251-L255)).
* The deployment watcher [updates local local deployment field and trigger `deploymentUpdateCh` channel]( abaa9c5c5b/nomad/deploymentwatcher/deployment_watcher.go (L136-L147))
* The [deployment watcher `deploymentUpdateCh` selector is activated](abaa9c5c5b/nomad/deploymentwatcher/deployment_watcher.go (L455-L489)). Most of the time the selector clause is a no-op, because the flow was triggered due to another deployment update
* The `watch` for-loop iterates again and in the previous code we create yet another goroutine and blocking call that risks being rate limited.
Co-authored-by: Tim Gross <tgross@hashicorp.com>
The test fails reliably locally on my machine. The test uses non-dev mode
where Raft actions get committed to disk, causing operations to exceed
the 50ms tight Raft deadlines.
So, here we ensure that non-dev servers use default Raft config
files with longer timeouts.
Also, noticed that the test queries a server, that may a follower with a
stale state.
I've updated the test to ensure we query the leader for its state. The
Barrier call ensures that the leader is a "stable" leader with committed
entries. Protects against a window where a new leader reports the
previous term before it commits a raft log entry.
Ensure that all servers are joined to each other before test proceed,
instead of just joining them to the first server and relying on
background serf propagation.
Relying on backgorund serf propagation is a cause of flakiness,
specially for tests with multiple regions. The server receiving the RPC
may not be aware of the region and fail to forward RPC accordingly.
For example, consider `TestMonitor_Monitor_RemoteServer` failure in https://app.circleci.com/pipelines/github/hashicorp/nomad/16402/workflows/7f327235-7d0c-40ba-9757-600522afca51/jobs/158045 you can observe:
* `nomad-117` is joined to `nomad-118` and `nomad-119`
* `nomad-119` is the foreign region
* `nomad-117` gains leadership in the default region, `nomad-118` is the non-leader
* search logs for `nomad: adding server` and notice that `nomad-118`
only added `nomad-118` and `nomad-118`, but not `nomad-119`!
* so the query to the non-leader in the test fails to be forwarded to
the appopriate region.
Glint pulled in an updated version of mitchellh/go-testing-interface
which broke some existing tests because the update added a Parallel()
method to testing.T. This switches to the standard library testing.TB
which doesn't have a Parallel() method.
(cherry-pick ent back to oss)
This PR moves a lot of Consul ACL token validation tests into ent files,
so that we can verify correct behavior difference between OSS and ENT
Nomad versions.
This PR fixes the Nomad Object Namespace <-> Consul ACL Token relationship
check when using Consul OSS (or Consul ENT without namespace support).
Nomad v1.1.0 introduced a regression where Nomad would fail the validation
when submitting Connect jobs and allow_unauthenticated set to true, with
Consul OSS - because it would do the namespace check against the Consul ACL
token assuming the "default" namespace, which does not work because Consul OSS
does not have namespaces.
Instead of making the bad assumption, expand the namespace check to handle
each special case explicitly.
Fixes#10718
This PR implements first-class support for Nomad running Consul
Connect Mesh Gateways. Mesh gateways enable services in the Connect
mesh to make cross-DC connections via gateways, where each datacenter
may not have full node interconnectivity.
Consul docs with more information:
https://www.consul.io/docs/connect/gateways/mesh-gateway
The following group level service block can be used to establish
a Connect mesh gateway.
service {
connect {
gateway {
mesh {
// no configuration
}
}
}
}
Services can make use of a mesh gateway by configuring so in their
upstream blocks, e.g.
service {
connect {
sidecar_service {
proxy {
upstreams {
destination_name = "<service>"
local_bind_port = <port>
datacenter = "<datacenter>"
mesh_gateway {
mode = "<mode>"
}
}
}
}
}
}
Typical use of a mesh gateway is to create a bridge between datacenters.
A mesh gateway should then be configured with a service port that is
mapped from a host_network configured on a WAN interface in Nomad agent
config, e.g.
client {
host_network "public" {
interface = "eth1"
}
}
Create a port mapping in the group.network block for use by the mesh
gateway service from the public host_network, e.g.
network {
mode = "bridge"
port "mesh_wan" {
host_network = "public"
}
}
Use this port label for the service.port of the mesh gateway, e.g.
service {
name = "mesh-gateway"
port = "mesh_wan"
connect {
gateway {
mesh {}
}
}
}
Currently Envoy is the only supported gateway implementation in Consul.
By default Nomad client will run the latest official Envoy docker image
supported by the local Consul agent. The Envoy task can be customized
by setting `meta.connect.gateway_image` in agent config or by setting
the `connect.sidecar_task` block.
Gateways require Consul 1.8.0+, enforced by the Nomad scheduler.
Closes#9446
When `nomad volume create` was introduced in Nomad 1.1.0, we changed the
volume spec to take a list of capabilities rather than a single capability, to
meet the requirements of the CSI spec. When a volume is registered via `nomad
volume register`, we should be using the same fields to validate the volume
with the controller plugin.
This PR adds two additional constraints on Connect sidecar and gateway tasks,
making sure Nomad schedules them only onto nodes where Connect is actually
enabled on the Consul agent.
Consul requires `connect.enabled = true` and `ports.grpc = <number>` to be
explicitly set on agent configuration before Connect APIs will work. Until
now, Nomad would only validate a minimum version of Consul, which would cause
confusion for users who try to run Connect tasks on nodes where Consul is not
yet sufficiently configured. These contstraints prevent job scheduling on nodes
where Connect is not actually use-able.
Closes#10700
The plans generated by the scheduler produce high-level output of counts on each
evaluation, but when debugging scheduler issues it'd be nice to have a more
detailed view of the resulting plan. Emitting this log at trace minimizes the
overhead, and producing it in the plan applyer makes it easier to find as it
will always be on the leader.
Arguments to our logger's various write methods are evaluated eagerly, so
method calls in log parameters will always be called, regardless of log
level. Move some logger messages to the logger's `Fmt` method so that
`GoString` is evaluated lazily instead.
Include the VolumeCapability.MountVolume data in
ControllerPublishVolume, CreateVolume, and ValidateVolumeCapabilities
RPCs sent to the CSI controller. The previous behavior was to only
include the MountVolume capability in the NodeStageVolume request, which
on some CSI implementations would be rejected since the Volume was not
originally provisioned with the specific mount capabilities requested.
seems when this PR was raised, the Nomad CI provider was having
availability issues meaning the test suite was not correctly run,
thus allowing broken tests into main. The PR itself exercised test
code which had not been hit before.
The particular problem is when identifying whether the event
received is a heartbeat; this was performed using standard Golang
conditionals. Unfortunately the operator == is not defined on byte
arrays, resulting in the check always returning false. To overcome
this issue the code now uses the bytes.Equal function to correctly
compare the data.
This PR uses the checksum of the check for which a dynamic exposed
port is being generated (instead of a UUID prefix) so that the
generated port label is deterministic.
This fixes 2 bugs:
- 'job plan' output is now idempotent for jobs making use of injected ports
- tasks will no longer be destructively updated when jobs making use of
injected ports are re-run without changing any user specified part of
job config.
Closes: https://github.com/hashicorp/nomad/issues/10099
Cluster operators want to have better control over memory
oversubscription and may want to enable/disable it based on their
experience.
This PR adds a scheduler configuration field to control memory
oversubscription. It's additional field that can be set in the [API via Scheduler Config](https://www.nomadproject.io/api-docs/operator/scheduler), or [the agent server config](https://www.nomadproject.io/docs/configuration/server#configuring-scheduler-config).
I opted to have the memory oversubscription be an opt-in, but happy to change it. To enable it, operators should call the API with:
```json
{
"MemoryOversubscriptionEnabled": true
}
```
If memory oversubscription is disabled, submitting jobs specifying `memory_max` will get a "Memory oversubscription is not
enabled" warnings, but the jobs will be accepted without them accessing
the additional memory.
The warning message is like:
```
$ nomad job run /tmp/j
Job Warnings:
1 warning(s):
* Memory oversubscription is not enabled; Task cache.redis memory_max value will be ignored
==> Monitoring evaluation "7c444157"
Evaluation triggered by job "example"
==> Monitoring evaluation "7c444157"
Evaluation within deployment: "9d826f13"
Allocation "aa5c3cad" created: node "9272088e", group "cache"
Evaluation status changed: "pending" -> "complete"
==> Evaluation "7c444157" finished with status "complete"
# then you can examine the Alloc AllocatedResources to validate whether the task is allowed to exceed memory:
$ nomad alloc status -json aa5c3cad | jq '.AllocatedResources.Tasks["redis"].Memory'
{
"MemoryMB": 256,
"MemoryMaxMB": 0
}
```
Add a new driver capability: RemoteTasks.
When a task is run by a driver with RemoteTasks set, its TaskHandle will
be propagated to the server in its allocation's TaskState. If the task
is replaced due to a down node or draining, its TaskHandle will be
propagated to its replacement allocation.
This allows tasks to be scheduled in remote systems whose lifecycles are
disconnected from the Nomad node's lifecycle.
See https://github.com/hashicorp/nomad-driver-ecs for an example ECS
remote task driver.
This PR adds e2e tests for Consul Namespaces for Nomad Enterprise
with Consul ACLs enabled.
Needed to add support for Consul ACL tokens with `namespace` and
`namespace_prefix` blocks, which Nomad parses and validates before
tossing the token. These bits will need to be picked back to OSS.
This PR fixes a bug where Nomad was more restrictive on Ingress Gateway Configuration
Entry definitions than Consul. Before, Nomad would not allow for declaring IGCEs with
http listeners with service name "*", which is a special feature allowable by Consul.
Note: to make http protocol work, a service-default must be defined setting the
protocol to http for each service.
Fixes: #9729
This PR adds job-submission validation that checks for the use of uppercase characters
in group and service names for services that make use of Consul Connect. This prevents
attempting to launch services that Consul will not validate correctly, which in turn
causes tasks to fail to launch in Nomad.
Underlying Consul issue: https://github.com/hashicorp/consul/issues/6765Closes#7581#10450
Add Namespace as a top-level field in `/v1/jobs` stub.
The `/v1/jobs` endpoint already includes the namespace under `JobSummary`, though the API is odd, as typically the job ID and Namespace are in the same level, and the oddity complicates the UI frontend development.
The downside of adding it is redundant field, that makes the response body a bit bigger, specially for clusters with large jobs. Though, it should compress nicely and I expect the overhead to be small to overall response size. The benefit of a cleaner and more consistent API seem worth it.
Fixes#10431
This fixes a bug affecting drain nodes, where allocs may fail to be
migrated if they belong to different namespaces but share the same job
name.
The reason is that the helper function that creates the migration evals
indexed the allocs by job ID without accounting for the namespaces.
When job ids clash, only an eval is created for one and the rest of the
allocs remain intact.
Fixes#10172
Small change to pull in ent struct types in a switch
statement used by ent. They are benign in oss, this
is just to make sure OSS->ENT merges don't create a
diff.
(cherry-picked from ent without _ent things)
This is part 2/4 of e2e tests for Consul Namespaces. Took a
first pass at what the parameterized tests can look like, but
only on the ENT side for this PR. Will continue to refactor
in the next PRs.
Also fixes 2 bugs:
- Config Entries registered by Nomad Server on job registration
were not getting Namespace set
- Group level script checks were not getting Namespace set
Those changes will need to be copied back to Nomad OSS.
Nomad OSS + no ACLs (previously, needs refactor)
Nomad ENT + no ACLs (this)
Nomad OSS + ACLs (todo)
Nomad ENT + ALCs (todo)
This PR introduces the /v1/search/fuzzy API endpoint, used for fuzzy
searching objects in Nomad. The fuzzy search endpoint routes requests
to the Nomad Server leader, which implements the Search.FuzzySearch RPC
method.
Requests to the fuzzy search API are based on the api.FuzzySearchRequest
object, e.g.
{
"Text": "ed",
"Context": "all"
}
Responses from the fuzzy search API are based on the api.FuzzySearchResponse
object, e.g.
{
"Index": 27,
"KnownLeader": true,
"LastContact": 0,
"Matches": {
"tasks": [
{
"ID": "redis",
"Scope": [
"default",
"example",
"cache"
]
}
],
"evals": [],
"deployment": [],
"volumes": [],
"scaling_policy": [],
"images": [
{
"ID": "redis:3.2",
"Scope": [
"default",
"example",
"cache",
"redis"
]
}
]
},
"Truncations": {
"volumes": false,
"scaling_policy": false,
"evals": false,
"deployment": false
}
}
The API is tunable using the new server.search stanza, e.g.
server {
search {
fuzzy_enabled = true
limit_query = 200
limit_results = 1000
min_term_length = 5
}
}
These values can be increased or decreased, so as to provide more
search results or to reduce load on the Nomad Server. The fuzzy search
API can be disabled entirely by setting `fuzzy_enabled` to `false`.
Luiz Aoqui