* services: add pagination and filter support to info RPC.
* cli: add filter flag to service info command.
* docs: add pagination and filter details to services info API.
* paginator: minor updates to comment and func signature.
* Fix plugin capability sorting.
The `sort.StringSlice` method in the stdlib doesn't actually sort, but
instead constructs a sorting type which you call `Sort()` on.
* Sort allocations for plugins by modify index.
Present allocations in modify index order so that newest allocations
show up at the top of the list. This results in sorted allocs in
`nomad plugin status :id`, just like `nomad job status :id`.
* Sort allocations for volumes in HTTP response.
Present allocations in modify index order so that newest allocations
show up at the top of the list. This results in sorted allocs in
`nomad volume status :id`, just like `nomad job status :id`.
This is implemented in the HTTP response and not in the state store
because the state store maintains two separate lists of allocs that
are merged before sending over the API.
* Fix length of alloc IDs in `nomad volume status` output
The `related` query param is used to indicate that the request should
return a list of related (next, previous, and blocked) evaluations.
Co-authored-by: Jasmine Dahilig <jasmine@hashicorp.com>
CSI `CreateVolume` RPC is idempotent given that the topology,
capabilities, and parameters are unchanged. CSI volumes have many
user-defined fields that are immutable once set, and many fields that
are not user-settable.
Update the `Register` RPC so that updating a volume via the API merges
onto any existing volume without touching Nomad-controlled fields,
while validating it with the same strict requirements expected for
idempotent `CreateVolume` RPCs.
Also, clarify that this state store method is used for everything, not just
for the `Register` RPC.
The `CSIPlugin.List` RPC was intended to accept a prefix to filter the
list of plugins being listed. This was being accidentally being done
in the state store instead, which contributed to incorrect filtering
behavior for plugins in the `volume plugin status` command.
Move the prefix matching into the RPC so that it calls the
prefix-matching method in the state store if we're looking for a
prefix.
Update the `plugin status command` to accept a prefix for the plugin
ID argument so that it matches the expected behavior of other commands.
When using a prefix value and the * wildcard for namespace, the endpoint
would not take the prefix value into consideration due to the order in
which the checks were executed but also the logic for retrieving volumes
from the state store.
This commit changes the order to check for a prefix first and wraps the
result iterator of the state store query in a filter to apply the
prefix.
The paginator logic was built when go-memdb iterators would return items
ordered lexicographically by their ID prefixes, but #12054 added the
option for some tables to return results ordered by their `CreateIndex`
instead, which invalidated the previous paginator assumption.
The iterator used for pagination must still return results in some order
so that the paginator can properly handle requests where the next_token
value is not present in the results anymore (e.g., the eval was GC'ed).
In these situations, the paginator will start the returned page in the
first element right after where the requested token should've been.
This commit moves the logic to generate pagination tokens from the
elements being paginated to the iterator itself so that callers can have
more control over the token format to make sure they are properly
ordered and stable.
It also allows configuring the paginator as being ordered in ascending
or descending order, which is relevant when looking for a token that may
not be present anymore.
If a plugin job fails before successfully fingerprinting the plugins,
the plugin will not exist when we try to delete the job. Tolerate
missing plugins.
These API endpoints now return results in chronological order. They
can return results in reverse chronological order by setting the
query parameter ascending=true.
- Eval.List
- Deployment.List
When an allocation is updated, the job summary for the associated job
is also updated. CSI uses the job summary to set the expected count
for controller and node plugins. We incorrectly used the allocation's
server status instead of the job status when deciding whether to
update or remove the job from the plugins. This caused a node drain or
other terminal state for an allocation to clear the expected count for
the entire plugin.
Use the job status to guide whether to update or remove the expected
count.
The existing CSI tests for the state store incorrectly modeled the
updates we received from servers vs those we received from clients,
leading to test assertions that passed when they should not.
Rework the tests to clarify each step in the lifecycle and rename CSI state
store functions for clarity
* The volume claim GC method and volumewatcher both have logic
collecting terminal allocations that duplicates most of the logic
that's now in the state store's `CSIVolumeDenormalize` method. Copy
this logic into the state store so that all code paths have the same
view of the past claims.
* Remove logic in the volume claim GC that now lives in the state
store's `CSIVolumeDenormalize` method.
* Remove logic in the volumewatcher that now lives in the state
store's `CSIVolumeDenormalize` method.
* Remove logic in the node unpublish RPC that now lives in the state
store's `CSIVolumeDenormalize` method.
In the client's `(*csiHook) Postrun()` method, we make an unpublish
RPC that includes a claim in the `CSIVolumeClaimStateUnpublishing`
state and using the mode from the client. But then in the
`(*CSIVolume) Unpublish` RPC handler, we query the volume from the
state store (because we only get an ID from the client). And when we
make the client RPC for the node unpublish step, we use the _current
volume's_ view of the mode. If the volume's mode has been changed
before the old allocations can have their claims released, then we end
up making a CSI RPC that will never succeed.
Why does this code path get the mode from the volume and not the
claim? Because the claim written by the GC job in `(*CoreScheduler)
csiVolumeClaimGC` doesn't have a mode. Instead it just writes a claim
in the unpublishing state to ensure the volumewatcher detects a "past
claim" change and reaps all the claims on the volumes.
Fix this by ensuring that the `CSIVolumeDenormalize` creates past
claims for all nil allocations with a correct access mode set.
* csi: resolve invalid claim states on read
It's currently possible for CSI volumes to be claimed by allocations
that no longer exist. This changeset asserts a reasonable state at
the state store level by registering these nil allocations as "past
claims" on any read. This will cause any pass through the periodic GC
or volumewatcher to trigger the unpublishing workflow for those claims.
* csi: make feasibility check errors more understandable
When the feasibility checker finds we have no free write claims, it
checks to see if any of those claims are for the job we're currently
scheduling (so that earlier versions of a job can't block claims for
new versions) and reports a conflict if the volume can't be scheduled
so that the user can fix their claims. But when the checker hits a
claim that has a GCd allocation, the state is recoverable by the
server once claim reaping completes and no user intervention is
required; the blocked eval should complete. Differentiate the
scheduler error produced by these two conditions.
The command line client sends a specific volume ID, but this isn't
enforced at the API level and we were incorrectly using a prefix match
for volume deregistration, resulting in cases where a volume with a
shorter ID that's a prefix of another volume would be deregistered
instead of the intended volume.
Some operators use very long group/task `shutdown_delay` settings to
safely drain network connections to their workloads after service
deregistration. But during incident response, they may want to cause
that drain to be skipped so they can quickly shed load.
Provide a `-no-shutdown-delay` flag on the `nomad alloc stop` and
`nomad job stop` commands that bypasses the delay. This sets a new
desired transition state on the affected allocations that the
allocation/task runner will identify during pre-kill on the client.
Note (as documented here) that using this flag will almost always
result in failed inbound network connections for workloads as the
tasks will exit before clients receive updated service discovery
information and won't be gracefully drained.
API queries can request pagination using the `NextToken` and `PerPage`
fields of `QueryOptions`, when supported by the underlying API.
Add a `NextToken` field to the `structs.QueryMeta` so that we have a
common field across RPCs to tell the caller where to resume paging
from on their next API call. Include this field on the `api.QueryMeta`
as well so that it's available for future versions of List HTTP APIs
that wrap the response with `QueryMeta` rather than returning a simple
list of structs. In the meantime callers can get the `X-Nomad-NextToken`.
Add pagination to the `Eval.List` RPC by checking for pagination token
and page size in `QueryOptions`. This will allow resuming from the
last ID seen so long as the query parameters and the state store
itself are unchanged between requests.
Add filtering by job ID or evaluation status over the results we get
out of the state store.
Parse the query parameters of the `Eval.List` API into the arguments
expected for filtering in the RPC call.
This change modifies the Nomad job register and deregister RPCs to
accept an updated option set which includes eval priority. This
param is optional and override the use of the job priority to set
the eval priority.
In order to ensure all evaluations as a result of the request use
the same eval priority, the priority is shared to the
allocReconciler and deploymentWatcher. This creates a new
distinction between eval priority and job priority.
The Nomad agent HTTP API has been modified to allow setting the
eval priority on job update and delete. To keep consistency with
the current v1 API, job update accepts this as a payload param;
job delete accepts this as a query param.
Any user supplied value is validated within the agent HTTP handler
removing the need to pass invalid requests to the server.
The register and deregister opts functions now all for setting
the eval priority on requests.
The change includes a small change to the DeregisterOpts function
which handles nil opts. This brings the function inline with the
RegisterOpts.
This fixes a bug in the event stream API where it currently interprets
namespace=* as an actual namespace, not a wildcard. When Nomad parses
incoming requests, it sets namespace to default if not specified, which
means the request namespace will never be an empty string, which is what
the event subscription was checking for. This changes the conditional
logic to check for a wildcard namespace instead of an empty one.
It also updates some event tests to include the default namespace in the
subscription to match current behavior.
Fixes#10903
This PR implements a new "System Batch" scheduler type. Jobs can
make use of this new scheduler by setting their type to 'sysbatch'.
Like the name implies, sysbatch can be thought of as a hybrid between
system and batch jobs - it is for running short lived jobs intended to
run on every compatible node in the cluster.
As with batch jobs, sysbatch jobs can also be periodic and/or parameterized
dispatch jobs. A sysbatch job is considered complete when it has been run
on all compatible nodes until reaching a terminal state (success or failed
on retries).
Feasibility and preemption are governed the same as with system jobs. In
this PR, the update stanza is not yet supported. The update stanza is sill
limited in functionality for the underlying system scheduler, and is
not useful yet for sysbatch jobs. Further work in #4740 will improve
support for the update stanza and deployments.
Closes#2527
Glint pulled in an updated version of mitchellh/go-testing-interface
which broke some existing tests because the update added a Parallel()
method to testing.T. This switches to the standard library testing.TB
which doesn't have a Parallel() method.
Registration of Nomad volumes previously allowed for a single volume
capability (access mode + attachment mode pair). The recent `volume create`
command requires that we pass a list of requested capabilities, but the
existing workflow for claiming volumes and attaching them on the client
assumed that the volume's single capability was correct and unchanging.
Add `AccessMode` and `AttachmentMode` to `CSIVolumeClaim`, use these fields to
set the initial claim value, and add backwards compatibility logic to handle
the existing volumes that already have claims without these fields.
The HTTP test to create CSI volumes depends on having a controller plugin to
talk to, but the test was using a node-only plugin, which allows it to
silently ignore the missing controller.
