There are some refactorings that have to be made in the getter and state
where the api changed in `slices`
* Bump golang.org/x/exp
* Bump golang.org/x/exp in api
* Update job_endpoint_test
* [feedback] unexport sort function
When claiming a CSI volume, we need to ensure the CSI node plugin is running
before we send any CSI RPCs. This extends even to the controller publish RPC
because it requires the storage provider's "external node ID" for the
client. This primarily impacts client restarts but also is a problem if the node
plugin exits (and fingerprints) while the allocation that needs a CSI volume
claim is being placed.
Unfortunately there's no mapping of volume to plugin ID available in the
jobspec, so we don't have enough information to wait on plugins until we either
get the volume from the server or retrieve the plugin ID from data we've
persisted on the client.
If we always require getting the volume from the server before making the claim,
a client restart for disconnected clients will cause all the allocations that
need CSI volumes to fail. Even while connected, checking in with the server to
verify the volume's plugin before trying to make a claim RPC is inherently racy,
so we'll leave that case as-is and it will fail the claim if the node plugin
needed to support a newly-placed allocation is flapping such that the node
fingerprint is changing.
This changeset persists a minimum subset of data about the volume and its plugin
in the client state DB, and retrieves that data during the CSI hook's prerun to
avoid re-claiming and remounting the volume unnecessarily.
This changeset also updates the RPC handler to use the external node ID from the
claim whenever it is available.
Fixes: #13028
* cni: ensure to setup CNI addresses in deterministic order
Currently as commented in the code the go-cni library returns an unordered map
of interfaces. In cases where there are multiple CNI interfaces being created this
creates a problem with service registration and healthchecking because the first
address in the map is being used.
The use case we have where this is an issue is that we run CNI with the macvlan
plugin to isolate workloads, but they still need to be able to access the host on
a static address to be able to perform local resolving and hit host services like
the Consul agent API. To make this work there are 2 options, you either add a
macvlan interface on the host with an assigned address for each VLAN you have or
you create an additional veth bridged interface in the container namespace.
We chose the latter option through a custom CNI plugin but the ordering issue
leaves us with incorrect service registration.
* Updates after feedback
* First check for the CNIResult interfaces length, if it's zero we don't need to proceed
at all.
* Use sorted interfaces list for the address fallback scenario as well.
* Remove "found" log message logic, when an address isn't found an error is returned stating
the allocation could not be configured as an address was missing from the CNIResult. If we
still need a Warn message then we can add it to the condition that returns the error if no
address could be found instead of using the "found" bool logic.
In #17354 we made client updates prioritized to reduce client-to-server
traffic. When the client has no previously-acknowledged update we assume that
the update is of typical priority; although we don't know that for sure in
practice an allocation will never become healthy quickly enough that the first
update we send is the update saying the alloc is healthy.
But that doesn't account for allocations that quickly fail in an unrecoverable
way because of allocrunner hook failures, and it'd be nice to be able to send
those failure states to the server more quickly. This changeset does so and adds
some extra comments on reasoning behind priority.
This complements the `env` parameter, so that the operator can author
tasks that don't share their Vault token with the workload when using
`image` filesystem isolation. As a result, more powerful tokens can be used
in a job definition, allowing it to use template stanzas to issue all kinds of
secrets (database secrets, Vault tokens with very specific policies, etc.),
without sharing that issuing power with the task itself.
This is accomplished by creating a directory called `private` within
the task's working directory, which shares many properties of
the `secrets` directory (tmpfs where possible, not accessible by
`nomad alloc fs` or Nomad's web UI), but isn't mounted into/bound to the
container.
If the `disable_file` parameter is set to `false` (its default), the Vault token
is also written to the NOMAD_SECRETS_DIR, so the default behavior is
backwards compatible. Even if the operator never changes the default,
they will still benefit from the improved behavior of Nomad never reading
the token back in from that - potentially altered - location.
In Nomad 1.5.3 we fixed a security bug that allowed bypass of ACL checks if the
request came thru a client node first. But this fix broke (knowingly) the
identification of many client-to-server RPCs. These will be now measured as if
they were anonymous. The reason for this is that many client-to-server RPCs do
not send the node secret and instead rely on the protection of mTLS.
This changeset ensures that the node secret is being sent with every
client-to-server RPC request. In a future version of Nomad we can add
enforcement on the server side, but this was left out of this changeset to
reduce risks to the safe upgrade path.
Sending the node secret as an auth token introduces a new problem during initial
introduction of a client. Clients send many RPCs concurrently with
`Node.Register`, but until the node is registered the node secret is unknown to
the server and will be rejected as invalid. This causes permission denied
errors.
To fix that, this changeset introduces a gate on having successfully made a
`Node.Register` RPC before any other RPCs can be sent (except for `Status.Ping`,
which we need earlier but which also ignores the error because that handler
doesn't do an authorization check). This ensures that we only send requests with
a node secret already known to the server. This also makes client startup a
little easier to reason about because we know `Node.Register` must succeed
first, and it should make for a good place to hook in future plans for secure
introduction of nodes. The tradeoff is that an existing client that has running
allocs will take slightly longer (a second or two) to transition to ready after
a restart, because the transition in `Node.UpdateStatus` is gated at the server
by first submitting `Node.UpdateAlloc` with client alloc updates.
* client: do not disable memory swappiness if kernel does not support it
This PR adds a workaround for very old Linux kernels which do not support
the memory swappiness interface file. Normally we write a "0" to the file
to explicitly disable swap. In the case the kernel does not support it,
give libcontainer a nil value so it does not write anything.
Fixes#17448
* client: detect swappiness by writing to the file
* fixup changelog
Co-authored-by: James Rasell <jrasell@users.noreply.github.com>
---------
Co-authored-by: James Rasell <jrasell@users.noreply.github.com>
* Fix DevicesSets being removed when cpusets are reloaded with cgroup v2
This meant that if any allocation was created or removed, all
active DevicesSets were removed from all cgroups of all tasks.
This was most noticeable with "exec" and "raw_exec", as it meant
they no longer had access to /dev files.
* e2e: add test for verifying cgroups do not interfere with access to devices
---------
Co-authored-by: Seth Hoenig <shoenig@duck.com>
This changeset adds the node pool as a label anywhere we're already emitting
labels with additional information such as node class or ID about the client.
Provide a no-op implementation of the drivers.DriverNetoworkManager
interface to be used by systems that don't support network isolation and
prevent panics where a network manager is expected.
This PR fixes a bug where the docker network pause container would not be
stopped and removed in the case where a node is restarted, the alloc is
moved to another node, the node comes back up. See the issue below for
full repro conditions.
Basically in the DestroyNetwork PostRun hook we would depend on the
NetworkIsolationSpec field not being nil - which is only the case
if the Client stays alive all the way from network creation to network
teardown. If the node is rebooted we lose that state and previously
would not be able to find the pause container to remove. Now, we manually
find the pause container by scanning them and looking for the associated
allocID.
Fixes#17299
During shutdown of a client with drain_on_shutdown there is a race between
the Client ending the cgroup and the task's cpuset manager cleaning up
the cgroup. During the path traversal, skip anything we cannot read, which
avoids the nil DirEntry we try to dereference now.
The allocrunner sends several updates to the server during the early lifecycle
of an allocation and its tasks. Clients batch-up allocation updates every 200ms,
but experiments like the C2M challenge has shown that even with this batching,
servers can be overwhelmed with client updates during high volume
deployments. Benchmarking done in #9451 has shown that client updates can easily
represent ~70% of all Nomad Raft traffic.
Each allocation sends many updates during its lifetime, but only those that
change the `ClientStatus` field are critical for progressing a deployment or
kicking off a reschedule to recover from failures.
Add a priority to the client allocation sync and update the `syncTicker`
receiver so that we only send an update if there's a high priority update
waiting, or on every 5th tick. This means when there are no high priority
updates, the client will send updates at most every 1s instead of
200ms. Benchmarks have shown this can reduce overall Raft traffic by 10%, as
well as reduce client-to-server RPC traffic.
This changeset also switches from a channel-based collection of updates to a
shared buffer, so as to split batching from sending and prevent backpressure
onto the allocrunner when the RPC is slow. This doesn't have a major performance
benefit in the benchmarks but makes the implementation of the prioritized update
simpler.
Fixes: #9451
Consul v1.13.8 was released with a breaking change in the /v1/agent/self
endpoint version where a line break was being returned.
This caused the Nomad finterprint to fail because `NewVersion` errors on
parse.
This commit removes any extra space from the Consul version returned by
the API.
The `nomad tls cert` command did not create certificates with the correct SANs for
them to work with non default domain and region names. This changset updates the
code to support non default domains and regions in the certificates.
* client: ignore restart issued to terminal allocations
This PR fixes a bug where issuing a restart to a terminal allocation
would cause the allocation to run its hooks anyway. This was particularly
apparent with group_service_hook who would then register services but
then never deregister them - as the allocation would be effectively in
a "zombie" state where it is prepped to run tasks but never will.
* e2e: add e2e test for alloc restart zombies
* cl: tweak text
Co-authored-by: Tim Gross <tgross@hashicorp.com>
---------
Co-authored-by: Tim Gross <tgross@hashicorp.com>
The `DisableLogCollection` capability was introduced as an experimental
interface for the Docker driver in 0.10.4. The interface has been stable and
allowing third-party task drivers the same capability would be useful for those
drivers that don't need the additional overhead of logmon.
This PR only makes the capability public. It doesn't yet add it to the
configuration options for the other internal drivers.
Fixes: #14636#15686
Tools like `nomad-nodesim` are unable to implement a minimal implementation of
an allocrunner so that we can test the client communication without having to
lug around the entire allocrunner/taskrunner code base. The allocrunner was
implemented with an interface specifically for this purpose, but there were
circular imports that made it challenging to use in practice.
Move the AllocRunner interface into an inner package and provide a factory
function type. Provide a minimal test that exercises the new function so that
consumers have some idea of what the minimum implementation required is.
When client nodes are restarted, all allocations that have been scheduled on the
node have their modify index updated, including terminal allocations. There are
several contributing factors:
* The `allocSync` method that updates the servers isn't gated on first contact
with the servers. This means that if a server updates the desired state while
the client is down, the `allocSync` races with the `Node.ClientGetAlloc`
RPC. This will typically result in the client updating the server with "running"
and then immediately thereafter "complete".
* The `allocSync` method unconditionally sends the `Node.UpdateAlloc` RPC even
if it's possible to assert that the server has definitely seen the client
state. The allocrunner may queue-up updates even if we gate sending them. So
then we end up with a race between the allocrunner updating its internal state
to overwrite the previous update and `allocSync` sending the bogus or duplicate
update.
This changeset adds tracking of server-acknowledged state to the
allocrunner. This state gets checked in the `allocSync` before adding the update
to the batch, and updated when `Node.UpdateAlloc` returns successfully. To
implement this we need to be able to equality-check the updates against the last
acknowledged state. We also need to add the last acknowledged state to the
client state DB, otherwise we'd drop unacknowledged updates across restarts.
The client restart test has been expanded to cover a variety of allocation
states, including allocs stopped before shutdown, allocs stopped by the server
while the client is down, and allocs that have been completely GC'd on the
server while the client is down. I've also bench tested scenarios where the task
workload is killed while the client is down, resulting in a failed restore.
Fixes#16381
This PR fixes a bug where nodes configured with populated
/etc/ssh/ssh_known_hosts files would be unable to read them during
artifact downloading.
Fixes#17086
to avoid leaking task resources (e.g. containers,
iptables) if allocRunner prerun fails during
restore on client restart.
now if prerun fails, TaskRunner.MarkFailedKill()
will only emit an event, mark the task as failed,
and cancel the tr's killCtx, so then ar.runTasks()
-> tr.Run() can take care of the actual cleanup.
removed from (formerly) tr.MarkFailedDead(),
now handled by tr.Run():
* set task state as dead
* save task runner local state
* task stop hooks
also done in tr.Run() now that it's not skipped:
* handleKill() to kill tasks while respecting
their shutdown delay, and retrying as needed
* also includes task preKill hooks
* clearDriverHandle() to destroy the task
and associated resources
* task exited hooks
When the server restarts for the upgrade, it loads the `structs.Job` from the
Raft snapshot/logs. The jobspec has long since been parsed, so none of the
guards around the default value are in play. The empty field value for `Enabled`
is the zero value, which is false.
This doesn't impact any running allocation because we don't replace running
allocations when either the client or server restart. But as soon as any
allocation gets rescheduled (ex. you drain all your clients during upgrades),
it'll be using the `structs.Job` that the server has, which has `Enabled =
false`, and logs will not be collected.
This changeset fixes the bug by adding a new field `Disabled` which defaults to
false (so that the zero value works), and deprecates the old field.
Fixes#17076
This PR does some cleanup of an old code path for versions of Consul that
did not support reporting the supported versions of Envoy in its API. Those
versions are no longer supported for years at this point, and the fallback
version of envoy hasn't been supported by any version of Consul for almost
as long. Remove this code path that is no longer useful.
This PR modifies references to the envoyproxy/envoy docker image to
explicitly include the docker.io prefix. This does not affect existing
users, but makes things easier for Podman users, who otherwise need to
specify the full name because Podman does not default to docker.io
This PR updates the envoy_bootstrap_hook to no longer disable itself if
the task driver in use is not docker. In other words, make it work for
podman and other image based task drivers. The hook now only checks that
1. the task is a connect sidecar
2. the task.config block contains an "image" field
* services: un-mark group services as deregistered if restart hook runs
This PR may fix a bug where group services will never be deregistered if the
group undergoes a task restart.
* e2e: add test case for restart and deregister group service
* cl: add cl
* e2e: add wait for service list call
Some Nomad users ship application logs out-of-band via syslog. For these users
having `logmon` (and `docker_logger`) running is unnecessary overhead. Allow
disabling the logmon and pointing the task's stdout/stderr to /dev/null.
This changeset is the first of several incremental improvements to log
collection short of full-on logging plugins. The next step will likely be to
extend the internal-only task driver configuration so that cluster
administrators can turn off log collection for the entire driver.
---
Fixes: #11175
Co-authored-by: Thomas Weber <towe75@googlemail.com>
