Move some common Vault API data struct decoding out of the Vault client
so it can be reused in other situations.
Make Vault job validation its own function so it's easier to expand it.
Rename the `Job.VaultPolicies` method to just `Job.Vault` since it
returns the full Vault block, not just their policies.
Set `ChangeMode` on `Vault.Canonicalize`.
Add some missing tests.
Allows specifying an entity alias that will be used by Nomad when
deriving the task Vault token.
An entity alias assigns an indentity to a token, allowing better control
and management of Vault clients since all tokens with the same indentity
alias will now be considered the same client. This helps track Nomad
activity in Vault's audit logs and better control over Vault billing.
Add support for a new Nomad server configuration to define a default
entity alias to be used when deriving Vault tokens. This default value
will be used if the task doesn't have an entity alias defined.
The volume watcher design was based on deploymentwatcher and drainer,
but has an important difference: we don't want to maintain a goroutine
for the lifetime of the volume. So we stop the volumewatcher goroutine
for a volume when that volume has no more claims to free. But the
shutdown races with updates on the parent goroutine, and it's possible
to drop updates. Fortunately these updates are picked up on the next
core GC job, but we're most likely to hit this race when we're
replacing an allocation and that's the time we least want to wait.
Wait until the volume has "settled" before stopping this goroutine so
that the race between shutdown and the parent goroutine sending on
`<-updateCh` is pushed to after the window we most care about quick
freeing of claims.
* Fixes a resource leak when volumewatchers are no longer needed. The
volume is nil and can't ever be started again, so the volume's
`watcher` should be removed from the top-level `Watcher`.
* De-flakes the GC job test: the test throws an error because the
claimed node doesn't exist and is unreachable. This flaked instead of
failed because we didn't correctly wait for the first pass through the
volumewatcher.
Make the GC job wait for the volumewatcher to reach the quiescent
timeout window state before running the GC eval under test, so that
we're sure the GC job's work isn't being picked up by processing one
of the earlier claims. Update the claims used so that we're sure the
GC pass won't hit a node unpublish error.
* Adds trace logging to unpublish operations
In the same manner as the delete RPC, the list and read service
registration endpoints can be called either by external operators
or Nomad nodes. The latter occurs when a template is being
rendered which includes Nomad API template funcs. In this case,
the auth token is looked up as the node secret ID for auth.
* lint: require should not be aliased in core_sched_test
* lint: require should not be aliased in volumes_watcher_test
* testing: don't alias state package in core_sched_test
In #12112 and #12113 we solved for the problem of races in releasing
volume claims, but there was a case that we missed. During a node
drain with a controller attach/detach, we can hit a race where we call
controller publish before the unpublish has completed. This is
discouraged in the spec but plugins are supposed to handle it
safely. But if the storage provider's API is slow enough and the
plugin doesn't handle the case safely, the volume can get "locked"
into a state where the provider's API won't detach it cleanly.
Check the claim before making any external controller publish RPC
calls so that Nomad is responsible for the canonical information about
whether a volume is currently claimed.
This has a couple side-effects that also had to get fixed here:
* Changing the order means that the volume will have a past claim
without a valid external node ID because it came from the client, and
this uncovered a separate bug where we didn't assert the external node
ID was valid before returning it. Fallthrough to getting the ID from
the plugins in the state store in this case. We avoided this
originally because of concerns around plugins getting lost during node
drain but now that we've fixed that we may want to revisit it in
future work.
* We should make sure we're handling `FailedPrecondition` cases from
the controller plugin the same way we handle other retryable cases.
* Several tests had to be updated because they were assuming we fail
in a particular order that we're no longer doing.
Revert a small part of #11600 after @lgfa29 discovered it would break
compatibility with Nomad <= v1.2!
Nomad <= v1.2 expects the `vsn` tag to exist in Serf. It has always been
`1`. It has no functional purpose. However it causes a parsing error if
it is not set:
https://github.com/hashicorp/nomad/blob/v1.2.6/nomad/util.go#L103-L108
This means Nomad servers at version v1.2 or older will not allow servers
without this tag to join.
The `mvn` minor version tag is also checked, but soft fails. I'm not
setting that because I want as much of this cruft gone as possible.
Downgrading the Raft version protocol is not a supported operation.
Checking for a downgrade is hard since this information is not stored in
any persistent place. When a server re-joins a cluster with a prior Raft
version, the Serf tag is updated so Nomad can't tell that the version
changed.
Mixed version clusters must be supported to allow for zero-downtime
rolling upgrades. During this it's expected that the cluster will have
mixed Raft versions. Enforcing consistency strong version consistency
would disrupt this flow.
The approach taken here is to store the Raft version on disk. When the
server starts the `raft_protocol` value is written to the file
`data_dir/raft/version`. If that file already exists, its content is
checked against the current `raft_protocol` value to detect downgrades
and prevent the server from starting.
Any other types of errors are ignore to prevent disruptions that are
outside the control of operators. The only option in cases of an invalid
or corrupt file would be to delete it, making this check useless. So
just overwrite its content with the new version and provide guidance on
how to check that their cluster is an expected state.
Pass-through the `-secret` and `-parameter` flags to allow setting
parameters for the snapshot and overriding the secrets we've stored on
the CSI volume in the state store.
Listing snapshots was incorrectly returning nanoseconds instead of
seconds, and formatting of timestamps both list and create snapshot
was treating the timestamp as though it were nanoseconds instead of
seconds. This resulted in create timestamps always being displayed as
zero values.
Fix the unit conversion error in the command line and the incorrect
extraction in the CSI plugin client code. Beef up the unit tests to
make sure this code is actually exercised.
A volume that has single-use access mode is feasibility checked during
scheduling to ensure that only a single reader or writer claim
exists. However, because feasibility checking is done one alloc at a
time before the plan is written, a job that's misconfigured to have
count > 1 that mounts one of these volumes will pass feasibility
checking.
Enforce the check at validation time instead to prevent us from even
trying to evaluation a job that's misconfigured this way.
When a node fails its heart beating a number of actions are taken
to ensure state is cleaned. Service registrations a loosely tied
to nodes, therefore we should remove these from state when a node
is considered terminally down.
When a node is garbage collected, we assume that the volume is no
longer attached to it and ignore the `ErrUnknownNode` error. But we
used `errors.Is` to check for a wrapped error, and RPC flattens the
errors during serialization. This results in an error check that works
in automated testing but not in real clusters. Use a string contains
check instead.
Raft v3 introduced a new API for adding and removing peers that takes
the peer ID instead of the address.
Prior to this change, Nomad would use the remote peer Raft version for
deciding which API to use, but this would not work in the scenario where
a Raft v3 server tries to remove a Raft v2 server; the code running uses
v3 so it's unable to call the v2 API.
This change uses the Raft version of the server running the code to
decide which API to use. If the remote peer is a Raft v2, it uses the
server address as the ID.
When a node is drained, system jobs are left until last so that
operators can rely on things like log shippers running even as their
applications are getting drained off. Include CSI plugins in this set
so that Controller plugins deployed as services can be handled as
gracefully as Node plugins that are running as system jobs.
* Fix plugin capability sorting.
The `sort.StringSlice` method in the stdlib doesn't actually sort, but
instead constructs a sorting type which you call `Sort()` on.
* Sort allocations for plugins by modify index.
Present allocations in modify index order so that newest allocations
show up at the top of the list. This results in sorted allocs in
`nomad plugin status :id`, just like `nomad job status :id`.
* Sort allocations for volumes in HTTP response.
Present allocations in modify index order so that newest allocations
show up at the top of the list. This results in sorted allocs in
`nomad volume status :id`, just like `nomad job status :id`.
This is implemented in the HTTP response and not in the state store
because the state store maintains two separate lists of allocs that
are merged before sending over the API.
* Fix length of alloc IDs in `nomad volume status` output
Part 2 of breaking up https://github.com/hashicorp/nomad/pull/12255
This PR makes it so gotestsum is invoked only in CircleCI. Also the
HCLogger(t) is plumbed more correctly in TestServer and TestAgent so
that they respect NOMAD_TEST_LOG_LEVEL.
The reason for these is we'll want to disable logging in GHA,
where spamming the disk with logs really drags performance.
The `related` query param is used to indicate that the request should
return a list of related (next, previous, and blocked) evaluations.
Co-authored-by: Jasmine Dahilig <jasmine@hashicorp.com>
When a Nomad server becomes the Raft leader, it must perform several
actions defined in the establishLeadership function. If any of these
actions fail, Raft will think the node is the leader, but it will not
actually be able to act as a Nomad leader.
In this scenario, leadership must be revoked and transferred to another
server if possible, or the node should retry the establishLeadership
steps.
The alloc list test with pagination was creating allocs before the
target namespace existed. This works in OSS but fails in ENT because
quotas are checked before the alloc can be created, so the namespace
must exist beforehand.
The `Job.List` RPC attaches a `JobSummary` to each job stub. We're
using the request namespace and not the job namespace for that query,
which results in a nil `JobSummary` whenever we pass the wildcard
namespace. This is incorrect and causes panics in downstream consumers
like the CLI, which assume the `JobSummary` is non-nil as an unstate
invariant.
CSI `CreateVolume` RPC is idempotent given that the topology,
capabilities, and parameters are unchanged. CSI volumes have many
user-defined fields that are immutable once set, and many fields that
are not user-settable.
Update the `Register` RPC so that updating a volume via the API merges
onto any existing volume without touching Nomad-controlled fields,
while validating it with the same strict requirements expected for
idempotent `CreateVolume` RPCs.
Also, clarify that this state store method is used for everything, not just
for the `Register` RPC.
The `CreateSnapshot` RPC expects a plugin ID to be set by the API, but
in the common case of the `nomad volume snapshot create` command, we
don't ask the user for the plugin ID because it's available from the
volume we're snapshotting.
Change the order of the RPC so that we get the volume first and then
use the volume's plugin ID for the plugin if the API didn't set the
value.
The `CSIPlugin.List` RPC was intended to accept a prefix to filter the
list of plugins being listed. This was being accidentally being done
in the state store instead, which contributed to incorrect filtering
behavior for plugins in the `volume plugin status` command.
Move the prefix matching into the RPC so that it calls the
prefix-matching method in the state store if we're looking for a
prefix.
Update the `plugin status command` to accept a prefix for the plugin
ID argument so that it matches the expected behavior of other commands.
