* ar: support opting into binding host ports to default network IP
* fix config plumbing
* plumb node address into network resource
* struct: only handle network resource upgrade path once
This changeset implements a periodic garbage collection of CSI volumes
with missing allocations. This can happen in a scenario where a node
update fails partially and the allocation updates are written to raft
but the evaluations to GC the volumes are dropped. This feature will
cover this edge case and ensure that upgrades from 0.11.0 and 0.11.1
get any stray claims cleaned up.
This changeset implements a periodic garbage collection of unused CSI
plugins. Plugins are self-cleaning when the last allocation for a
plugin is stopped, but this feature will cover any missing edge cases
and ensure that upgrades from 0.11.0 and 0.11.1 get any stray plugins
cleaned up.
allow oss to parse sink duration
clean up audit sink parsing
ent eventer config reload
fix typo
SetEnabled to eventer interface
client acl test
rm dead code
fix failing test
This change updates tests to honor `BootstrapExpect` exclusively when
forming test clusters and removes test only knobs, e.g.
`config.DevDisableBootstrap`.
Background:
Test cluster creation is fragile. Test servers don't follow the
BootstapExpected route like production clusters. Instead they start as
single node clusters and then get rejoin and may risk causing brain
split or other test flakiness.
The test framework expose few knobs to control those (e.g.
`config.DevDisableBootstrap` and `config.Bootstrap`) that control
whether a server should bootstrap the cluster. These flags are
confusing and it's unclear when to use: their usage in multi-node
cluster isn't properly documented. Furthermore, they have some bad
side-effects as they don't control Raft library: If
`config.DevDisableBootstrap` is true, the test server may not
immediately attempt to bootstrap a cluster, but after an election
timeout (~50ms), Raft may force a leadership election and win it (with
only one vote) and cause a split brain.
The knobs are also confusing as Bootstrap is an overloaded term. In
BootstrapExpect, we refer to bootstrapping the cluster only after N
servers are connected. But in tests and the knobs above, it refers to
whether the server is a single node cluster and shouldn't wait for any
other server.
Changes:
This commit makes two changes:
First, it relies on `BootstrapExpected` instead of `Bootstrap` and/or
`DevMode` flags. This change is relatively trivial.
Introduce a `Bootstrapped` flag to track if the cluster is bootstrapped.
This allows us to keep `BootstrapExpected` immutable. Previously, the
flag was a config value but it gets set to 0 after cluster bootstrap
completes.
Nomad agent may silently ignore cni_path and bridge setting, when it
merges configs from multiple files (or against default/dev config).
This PR ensures that the values are merged properly.
Introduce limits to prevent unauthorized users from exhausting all
ephemeral ports on agents:
* `{https,rpc}_handshake_timeout`
* `{http,rpc}_max_conns_per_client`
The handshake timeout closes connections that have not completed the TLS
handshake by the deadline (5s by default). For RPC connections this
timeout also separately applies to first byte being read so RPC
connections with TLS enabled have `rpc_handshake_time * 2` as their
deadline.
The connection limit per client prevents a single remote TCP peer from
exhausting all ephemeral ports. The default is 100, but can be lowered
to a minimum of 26. Since streaming RPC connections create a new TCP
connection (until MultiplexV2 is used), 20 connections are reserved for
Raft and non-streaming RPCs to prevent connection exhaustion due to
streaming RPCs.
All limits are configurable and may be disabled by setting them to `0`.
This also includes a fix that closes connections that attempt to create
TLS RPC connections recursively. While only users with valid mTLS
certificates could perform such an operation, it was added as a
safeguard to prevent programming errors before they could cause resource
exhaustion.
The dev mode flag for connect was binding to the default interface's
IP, but this makes for a bad user experience for the CLI which will
default to 127.0.0.1. If we bind to 0.0.0.0 instead the CLI will work
without further configuration by the user.
Consul Connect must route traffic between network namespaces through a
public interface (i.e. not localhost). In order to support testing in
dev mode, users needed to manually set the interface which doesn't
make for a smooth experience.
This commit adds a facility for adding optional parameters to the
`nomad agent -dev` flag and uses it to add a `-dev=connect` flag that
binds to a public interface on the host.
When rendering a task template, the `plugin` function is no longer
permitted by default and will raise an error. An operator can opt-in
to permitting this function with the new `template.function_blacklist`
field in the client configuration.
When rendering a task template, path parameters for the `file`
function will be treated as relative to the task directory by
default. Relative paths or symlinks that point outside the task
directory will raise an error. An operator can opt-out of this
protection with the new `template.disable_file_sandbox` field in the
client configuration.
This exposes a client flag to disable nomad remote exec support in
environments where access to tasks ought to be restricted.
I used `disable_remote_exec` client flag that defaults to allowing
remote exec. Opted for a client config that can be used to disable
remote exec globally, or to a subset of the cluster if necessary.
IOPS have been modelled as a resource since Nomad 0.1 but has never
actually been detected and there is no plan in the short term to add
detection. This is because IOPS is a bit simplistic of a unit to define
the performance requirements from the underlying storage system. In its
current state it adds unnecessary confusion and can be removed without
impacting any users. This PR leaves IOPS defined at the jobspec parsing
level and in the api/ resources since these are the two public uses of
the field. These should be considered deprecated and only exist to allow
users to stop using them during the Nomad 0.9.x release. In the future,
there should be no expectation that the field will exist.
This commit:
* Improves how we combine the old retry-* fields and the new stanza and
how it is validated
* Handles the new stanza setting start_join
* Fixes integration test to not bind to the standard port and instead be
randomized.
* Simplifies parsing of the old retry_interval
* Fixes the errors from retry join being masked
* Flags get parsed into new server_join stanza
Allow to set the total memory of an agent in its configuration file. This
can be used in case the automatic detection doesn't work or in specific
environments when memory overcommit (using swap for example) can be
desirable.
* Allow server TLS configuration to be reloaded via SIGHUP
* dynamic tls reloading for nomad agents
* code cleanup and refactoring
* ensure keyloader is initialized, add comments
* allow downgrading from TLS
* initalize keyloader if necessary
* integration test for tls reload
* fix up test to assert success on reloaded TLS configuration
* failure in loading a new TLS config should remain at current
Reload only the config if agent is already using TLS
* reload agent configuration before specific server/client
lock keyloader before loading/caching a new certificate
* introduce a get-or-set method for keyloader
* fixups from code review
* fix up linting errors
* fixups from code review
* add lock for config updates; improve copy of tls config
* GetCertificate only reloads certificates dynamically for the server
* config updates/copies should be on agent
* improve http integration test
* simplify agent reloading storing a local copy of config
* reuse the same keyloader when reloading
* Test that server and client get reloaded but keep keyloader
* Keyloader exposes GetClientCertificate as well for outgoing connections
* Fix spelling
* correct changelog style
This PR allows tuning of heartbeat TTLs. An example of very aggressive
settings is as follows:
```
server {
heartbeat_grace = "1s"
min_heartbeat_ttl = "1s"
max_heartbeats_per_second = 200.0
}
```
A fix to #2739 instead of forcing IPv6 users to always specify a port as
well.
Prior to this commit IPv6 advertise addresses which lacked a port would
fail instead of having the default port added because
`net.SplitHostPort(someipv6)` returns a different error than
`net.SplitHostPort(someipv4)`.
A slight improvement to #2399 - if bind is localhost, return an error
instead of advertising a private ip. The advertised ip isn't valid and
will just cause errors on use. It's better to fail with an error message
instructing users how to fix the problem.
