Adds a new configuration to clients to optionally allow them to drain their
workloads on shutdown. The client sends the `Node.UpdateDrain` RPC targeting
itself and then monitors the drain state as seen by the server until the drain
is complete or the deadline expires. If it loses connection with the server, it
will monitor local client status instead to ensure allocations are stopped
before exiting.
* api: enable support for setting original source alongside job
This PR adds support for setting job source material along with
the registration of a job.
This includes a new HTTP endpoint and a new RPC endpoint for
making queries for the original source of a job. The
HTTP endpoint is /v1/job/<id>/submission?version=<version> and
the RPC method is Job.GetJobSubmission.
The job source (if submitted, and doing so is always optional), is
stored in the job_submission memdb table, separately from the
actual job. This way we do not incur overhead of reading the large
string field throughout normal job operations.
The server config now includes job_max_source_size for configuring
the maximum size the job source may be, before the server simply
drops the source material. This should help prevent Bad Things from
happening when huge jobs are submitted. If the value is set to 0,
all job source material will be dropped.
* api: avoid writing var content to disk for parsing
* api: move submission validation into RPC layer
* api: return an error if updating a job submission without namespace or job id
* api: be exact about the job index we associate a submission with (modify)
* api: reword api docs scheduling
* api: prune all but the last 6 job submissions
* api: protect against nil job submission in job validation
* api: set max job source size in test server
* api: fixups from pr
* build: add BuildDate to version info
will be used in enterprise to compare to license expiration time
* cli: multi-line version output, add BuildDate
before:
$ nomad version
Nomad v1.4.3 (coolfakecommithashomgoshsuchacoolonewoww)
after:
$ nomad version
Nomad v1.5.0-dev
BuildDate 2023-02-17T19:29:26Z
Revision coolfakecommithashomgoshsuchacoolonewoww
compare consul:
$ consul version
Consul v1.14.4
Revision dae670fe
Build Date 2023-01-26T15:47:10Z
Protocol 2 spoken by default, blah blah blah...
and vault:
$ vault version
Vault v1.12.3 (209b3dd99fe8ca320340d08c70cff5f620261f9b), built 2023-02-02T09:07:27Z
* docs: update version command output
This change introduces the Task API: a portable way for tasks to access Nomad's HTTP API. This particular implementation uses a Unix Domain Socket and, unlike the agent's HTTP API, always requires authentication even if ACLs are disabled.
This PR contains the core feature and tests but followup work is required for the following TODO items:
- Docs - might do in a followup since dynamic node metadata / task api / workload id all need to interlink
- Unit tests for auth middleware
- Caching for auth middleware
- Rate limiting on negative lookups for auth middleware
---------
Co-authored-by: Seth Hoenig <shoenig@duck.com>
* Add `bridge_network_hairpin_mode` client config setting
* Add node attribute: `nomad.bridge.hairpin_mode`
* Changed format string to use `%q` to escape user provided data
* Add test to validate template JSON for developer safety
Co-authored-by: Daniel Bennett <dbennett@hashicorp.com>
Prior to 2409f72 the code compared the modification index of a job to itself. Afterwards, the code compared the creation index of the job to itself. In either case there should never be a case of re-parenting of allocs causing the evaluation to trivially always result in false, which leads to unreclaimable memory.
Prior to this change allocations and evaluations for batch jobs were never garbage collected until the batch job was explicitly stopped. The new `batch_eval_gc_threshold` server configuration controls how often they are collected. The default threshold is `24h`.
Implement a metric for RPC requests with labels on the identity, so that
administrators can monitor the source of requests within the cluster. This
changeset demonstrates the change with the new `ACL.WhoAmI` RPC, and we'll wire
up the remaining RPCs once we've threaded the new pre-forwarding authentication
through the all.
Note that metrics are measured after we forward but before we return any
authentication error. This ensures that we only emit metrics on the server that
actually serves the request. We'll perform rate limiting at the same place.
Includes telemetry configuration to omit identity labels.
* Add config elements
* Wire in snapshot configuration to raft
* Add hot reload of raft config
* Add documentation for new raft settings
* Add changelog
The configuration knobs for root keyring garbage collection are present in the
consumer and present in the user-facing config, but we missed the spot where we
copy from one to the other. Fix this so that users can set their own thresholds.
The root key is automatically rotated every ~30d, but the function that does
both rotation and key GC was wired up such that `nomad system gc` caused an
unexpected key rotation. Split this into two functions so that `nomad system gc`
cleans up old keys without forcing a rotation, which will be done periodially
or by the `nomad operator root keyring rotate` command.
The client ACL cache was not accounting for tokens which included
ACL role links. This change modifies the behaviour to resolve role
links to policies. It will also now store ACL roles within the
cache for quick lookup. The cache TTL is configurable in the same
manner as policies or tokens.
Another small fix is included that takes into account the ACL
token expiry time. This was not included, which meant tokens with
expiry could be used past the expiry time, until they were GC'd.
Before this change, Client had 2 copies of the config object: config and configCopy. There was no guidance around which to use where (other than configCopy's comment to pass it to alloc runners), both are shared among goroutines and mutated in data racy ways. At least at one point I think the idea was to have `config` be mutable and then grab a lock to overwrite `configCopy`'s pointer atomically. This would have allowed alloc runners to read their config copies in data race safe ways, but this isn't how the current implementation worked.
This change takes the following approach to safely handling configs in the client:
1. `Client.config` is the only copy of the config and all access must go through the `Client.configLock` mutex
2. Since the mutex *only protects the config pointer itself and not fields inside the Config struct:* all config mutation must be done on a *copy* of the config, and then Client's config pointer is overwritten while the mutex is acquired. Alloc runners and other goroutines with the old config pointer will not see config updates.
3. Deep copying is implemented on the Config struct to satisfy the previous approach. The TLS Keyloader is an exception because it has its own internal locking to support mutating in place. An unfortunate complication but one I couldn't find a way to untangle in a timely fashion.
4. To facilitate deep copying I made an *internally backward incompatible API change:* our `helper/funcs` used to turn containers (slices and maps) with 0 elements into nils. This probably saves a few memory allocations but makes it very easy to cause panics. Since my new config handling approach uses more copying, it became very difficult to ensure all code that used containers on configs could handle nils properly. Since this code has caused panics in the past, I fixed it: nil containers are copied as nil, but 0-element containers properly return a new 0-element container. No more "downgrading to nil!"
Plan rejections occur when the scheduler work and the leader plan
applier disagree on the feasibility of a plan. This may happen for valid
reasons: since Nomad does parallel scheduling, it is expected that
different workers will have a different state when computing placements.
As the final plan reaches the leader plan applier, it may no longer be
valid due to a concurrent scheduling taking up intended resources. In
these situations the plan applier will notify the worker that the plan
was rejected and that they should refresh their state before trying
again.
In some rare and unexpected circumstances it has been observed that
workers will repeatedly submit the same plan, even if they are always
rejected.
While the root cause is still unknown this mitigation has been put in
place. The plan applier will now track the history of plan rejections
per client and include in the plan result a list of node IDs that should
be set as ineligible if the number of rejections in a given time window
crosses a certain threshold. The window size and threshold value can be
adjusted in the server configuration.
To avoid marking several nodes as ineligible at one, the operation is rate
limited to 5 nodes every 30min, with an initial burst of 10 operations.
This commit adds configuration parameters to control ACL token
expirations. This includes both limits on the min and max TTL
expiration values, as well as a GC threshold for expired tokens.
Fix numerous go-getter security issues:
- Add timeouts to http, git, and hg operations to prevent DoS
- Add size limit to http to prevent resource exhaustion
- Disable following symlinks in both artifacts and `job run`
- Stop performing initial HEAD request to avoid file corruption on
retries and DoS opportunities.
**Approach**
Since Nomad has no ability to differentiate a DoS-via-large-artifact vs
a legitimate workload, all of the new limits are configurable at the
client agent level.
The max size of HTTP downloads is also exposed as a node attribute so
that if some workloads have large artifacts they can specify a high
limit in their jobspecs.
In the future all of this plumbing could be extended to enable/disable
specific getters or artifact downloading entirely on a per-node basis.
This change modifies the template task runner to utilise the
new consul-template which includes Nomad service lookup template
funcs.
In order to provide security and auth to consul-template, we use
a custom HTTP dialer which is passed to consul-template when
setting up the runner. This method follows Vault implementation.
Co-authored-by: Michael Schurter <mschurter@hashicorp.com>
This PR adds support for the raw_exec driver on systems with only cgroups v2.
The raw exec driver is able to use cgroups to manage processes. This happens
only on Linux, when exec_driver is enabled, and the no_cgroups option is not
set. The driver uses the freezer controller to freeze processes of a task,
issue a sigkill, then unfreeze. Previously the implementation assumed cgroups
v1, and now it also supports cgroups v2.
There is a bit of refactoring in this PR, but the fundamental design remains
the same.
Closes#12351#12348
Nomad inherited protocol version numbering configuration from Consul and
Serf, but unlike those projects Nomad has never used it. Nomad's
`protocol_version` has always been `1`.
While the code is effectively unused and therefore poses no runtime
risks to leave, I felt like removing it was best because:
1. Nomad's RPC subsystem has been able to evolve extensively without
needing to increment the version number.
2. Nomad's HTTP API has evolved extensively without increment
`API{Major,Minor}Version`. If we want to version the HTTP API in the
future, I doubt this is the mechanism we would choose.
3. The presence of the `server.protocol_version` configuration
parameter is confusing since `server.raft_protocol` *is* an important
parameter for operators to consider. Even more confusing is that
there is a distinct Serf protocol version which is included in `nomad
server members` output under the heading `Protocol`. `raft_protocol`
is the *only* protocol version relevant to Nomad developers and
operators. The other protocol versions are either deadcode or have
never changed (Serf).
4. If we were to need to version the RPC, HTTP API, or Serf protocols, I
don't think these configuration parameters and variables are the best
choice. If we come to that point we should choose a versioning scheme
based on the use case and modern best practices -- not this 6+ year
old dead code.
This PR exposes the following existing`consul-template` configuration options to Nomad jobspec authors in the `{job.group.task.template}` stanza.
- `wait`
It also exposes the following`consul-template` configuration to Nomad operators in the `{client.template}` stanza.
- `max_stale`
- `block_query_wait`
- `consul_retry`
- `vault_retry`
- `wait`
Finally, it adds the following new Nomad-specific configuration to the `{client.template}` stanza that allows Operators to set bounds on what `jobspec` authors configure.
- `wait_bounds`
Co-authored-by: Tim Gross <tgross@hashicorp.com>
Co-authored-by: Michael Schurter <mschurter@hashicorp.com>
- Making RPC Upgrade mode reloadable.
- Add suggestions from code review
- remove spurious comment
- switch to require(t,...) form for test.
- Add to changelog
FailoverHeartbeatTTL is the amount of time to wait after a server leader failure
before considering reallocating client tasks. This TTL should be fairly long as
the new server leader needs to rebuild the entire heartbeat map for the
cluster. In deployments with a small number of machines, the default TTL (5m)
may be unnecessary long. Let's allow operators to configure this value in their
config files.
This PR changes Nomad's wrapper around the Consul NamespaceAPI so that
it will detect if the Consul Namespaces feature is enabled before making
a request to the Namespaces API. Namespaces are not enabled in Consul OSS,
and require a suitable license to be used with Consul ENT.
Previously Nomad would check for a 404 status code when makeing a request
to the Namespaces API to "detect" if Consul OSS was being used. This does
not work for Consul ENT with Namespaces disabled, which returns a 500.
Now we avoid requesting the namespace API altogether if Consul is detected
to be the OSS sku, or if the Namespaces feature is not licensed. Since
Consul can be upgraded from OSS to ENT, or a new license applied, we cache
the value for 1 minute, refreshing on demand if expired.
Fixes https://github.com/hashicorp/nomad-enterprise/issues/575
Note that the ticket originally describes using attributes from https://github.com/hashicorp/nomad/issues/10688.
This turns out not to be possible due to a chicken-egg situation between
bootstrapping the agent and setting up the consul client. Also fun: the
Consul fingerprinter creates its own Consul client, because there is no
[currently] no way to pass the agent's client through the fingerprint factory.
This PR introduces the /v1/search/fuzzy API endpoint, used for fuzzy
searching objects in Nomad. The fuzzy search endpoint routes requests
to the Nomad Server leader, which implements the Search.FuzzySearch RPC
method.
Requests to the fuzzy search API are based on the api.FuzzySearchRequest
object, e.g.
{
"Text": "ed",
"Context": "all"
}
Responses from the fuzzy search API are based on the api.FuzzySearchResponse
object, e.g.
{
"Index": 27,
"KnownLeader": true,
"LastContact": 0,
"Matches": {
"tasks": [
{
"ID": "redis",
"Scope": [
"default",
"example",
"cache"
]
}
],
"evals": [],
"deployment": [],
"volumes": [],
"scaling_policy": [],
"images": [
{
"ID": "redis:3.2",
"Scope": [
"default",
"example",
"cache",
"redis"
]
}
]
},
"Truncations": {
"volumes": false,
"scaling_policy": false,
"evals": false,
"deployment": false
}
}
The API is tunable using the new server.search stanza, e.g.
server {
search {
fuzzy_enabled = true
limit_query = 200
limit_results = 1000
min_term_length = 5
}
}
These values can be increased or decreased, so as to provide more
search results or to reduce load on the Nomad Server. The fuzzy search
API can be disabled entirely by setting `fuzzy_enabled` to `false`.
on Linux systems this is derived from the configure cpuset cgroup parent (defaults to /nomad)
for non Linux systems and Linux systems where cgroups are not enabled, the client defaults to using all cores
This PR adds the common OSS changes for adding support for Consul Namespaces,
which is going to be a Nomad Enterprise feature. There is no new functionality
provided by this changeset and hopefully no new bugs.
