Consul CLI uses CONSUL_HTTP_TOKEN, so Nomad should use the same.
Note that consul-template uses CONSUL_TOKEN, which Nomad also uses,
so be careful to preserve any reference to that in the consul-template
context.
Consul provides a feature of Service Definitions where the tags
associated with a service can be modified through the Catalog API,
overriding the value(s) configured in the agent's service configuration.
To enable this feature, the flag enable_tag_override must be configured
in the service definition.
Previously, Nomad did not allow configuring this flag, and thus the default
value of false was used. Now, it is configurable.
Because Nomad itself acts as a state machine around the the service definitions
of the tasks it manages, it's worth describing what happens when this feature
is enabled and why.
Consider the basic case where there is no Nomad, and your service is provided
to consul as a boring JSON file. The ultimate source of truth for the definition
of that service is the file, and is stored in the agent. Later, Consul performs
"anti-entropy" which synchronizes the Catalog (stored only the leaders). Then
with enable_tag_override=true, the tags field is available for "external"
modification through the Catalog API (rather than directly configuring the
service definition file, or using the Agent API). The important observation
is that if the service definition ever changes (i.e. the file is changed &
config reloaded OR the Agent API is used to modify the service), those
"external" tag values are thrown away, and the new service definition is
once again the source of truth.
In the Nomad case, Nomad itself is the source of truth over the Agent in
the same way the JSON file was the source of truth in the example above.
That means any time Nomad sets a new service definition, any externally
configured tags are going to be replaced. When does this happen? Only on
major lifecycle events, for example when a task is modified because of an
updated job spec from the 'nomad job run <existing>' command. Otherwise,
Nomad's periodic re-sync's with Consul will now no longer try to restore
the externally modified tag values (as long as enable_tag_override=true).
Fixes#2057
Re-orient the management of the tr.kill to happen in the parent of
the spawned goroutine that is doing the actual token derivation. This
makes the code a little more straightforward, making it easier to
reason about not leaking the worker goroutine.
The derivation of an SI token needs to be safegaurded by a context
timeout, otherwise an unresponsive Consul could cause the siHook
to block forever on Prestart.
Apply smaller suggestions like doc strings, variable names, etc.
Co-Authored-By: Nick Ethier <nethier@hashicorp.com>
Co-Authored-By: Michael Schurter <mschurter@hashicorp.com>
The TestEnvoyBootstrapHook_maybeLoadSIToken test case only works when
running as a non-priveleged user, since it deliberately tries to read
an un-readable file to simulate a failure loading the SI token file.
Was thinking about using the testing pattern where you create executable
shell scripts as test resources which "mock" the process a bit of code
is meant to fork+exec. Turns out that wasn't really necessary in this case.
When creating the envoy bootstrap configuration, we should append
the "-token=<token>" argument in the case where the sidsHook placed
the token in the secrets directory.
Nomad jobs may be configured with a TaskGroup which contains a Service
definition that is Consul Connect enabled. These service definitions end
up establishing a Consul Connect Proxy Task (e.g. envoy, by default). In
the case where Consul ACLs are enabled, a Service Identity token is required
for these tasks to run & connect, etc. This changeset enables the Nomad Server
to recieve RPC requests for the derivation of SI tokens on behalf of instances
of Consul Connect using Tasks. Those tokens are then relayed back to the
requesting Client, which then injects the tokens in the secrets directory of
the Task.
When a job is configured with Consul Connect aware tasks (i.e. sidecar),
the Nomad Client should be able to request from Consul (through Nomad Server)
Service Identity tokens specific to those tasks.
There is a case for always canonicalizing alloc.Job field when
canonicalizing the alloc. I'm less certain of implications though, and
the job canonicalize hasn't changed for a long time.
Here, we special case client restore from database as it's probably the
most relevant part. When receiving an alloc from RPC, the data should
be fresh enough.
Passes in agent enable_debug config to nomad server and client configs.
This allows for rpc endpoints to have more granular control if they
should be enabled or not in combination with ACLs.
enable debug on client test
Now that alloc.Canonicalize() is called in all alloc sources in the
client (i.e. on state restore and RPC fetching), we no longer need to
check alloc.TaskResources.
alloc.AllocatedResources is always non-nil through alloc runner.
Though, early on, we check for alloc validity, so NewTaskRunner and
TaskEnv must still check. `TestClient_AddAllocError` test validates
that behavior.
This commit ensures that Alloc.AllocatedResources is properly populated
when read from persistence stores (namely Raft and client state store).
The alloc struct may have been written previously by an arbitrary old
version that may only populate Alloc.TaskResources.
In 0.10.2 (specifically 387b016) we added interpolation to group
service blocks and centralized the logic for task environment
interpolation. This wasn't also added to script checks, which caused a
regression where the IDs for script checks for services w/
interpolated fields (ex. the service name) didn't match the service ID
that was registered with Consul.
This changeset calls the same taskenv interpolation logic during
`script_check` configuration, and adds tests to reduce the risk of
future regressions by comparing the IDs of service hook and the check hook.
copy struct values
ensure groupserviceHook implements RunnerPreKillhook
run deregister first
test that shutdown times are delayed
move magic number into variable
Previously, Nomad used hand rolled HTTP requests to interact with the
EC2 metadata API. Recently however, we switched to using the AWS SDK for
this fingerprinting.
The default behaviour of the AWS SDK is to perform retries with
exponential backoff when a request fails. This is problematic for Nomad,
because interacting with the EC2 API is in our client start path.
Here we revert to our pre-existing behaviour of not performing retries
in the fast path, as if the metadata service is unavailable, it's likely
that nomad is not running in AWS.
Copy the updated version of freeport (sdk/freeport), and tweak it for use
in Nomad tests. This means staying below port 10000 to avoid conflicts with
the lib/freeport that is still transitively used by the old version of
consul that we vendor. Also provide implementations to find ephemeral ports
of macOS and Windows environments.
Ports acquired through freeport are supposed to be returned to freeport,
which this change now also introduces. Many tests are modified to include
calls to a cleanup function for Server objects.
This should help quite a bit with some flakey tests, but not all of them.
Our port problems will not go away completely until we upgrade our vendor
version of consul. With Go modules, we'll probably do a 'replace' to swap
out other copies of freeport with the one now in 'nomad/helper/freeport'.
Operators commonly have docker logs aggregated using various tools and
don't need nomad to manage their docker logs. Worse, Nomad uses a
somewhat heavy docker api call to collect them and it seems to cause
problems when a client runs hundreds of log collections.
Here we add a knob to disable log aggregation completely for nomad.
When log collection is disabled, we avoid running logmon and
docker_logger for the docker tasks in this implementation.
The downside here is once disabled, `nomad logs ...` commands and API
no longer return logs and operators must corrolate alloc-ids with their
aggregated log info.
This is meant as a stop gap measure. Ideally, we'd follow up with at
least two changes:
First, we should optimize behavior when we can such that operators don't
need to disable docker log collection. Potentially by reverting to
using pre-0.9 syslog aggregation in linux environments, though with
different trade-offs.
Second, when/if logs are disabled, nomad logs endpoints should lookup
docker logs api on demand. This ensures that the cost of log collection
is paid sparingly.
Add an RPC timeout for logmon. In
https://github.com/hashicorp/nomad/issues/6461#issuecomment-559747758 ,
`logmonClient.Stop` locked up and indefinitely blocked the task runner
destroy operation.
This is an incremental improvement. We still need to follow up to
understand how we got to that state, and the full impact of locked-up
Stop and its link to pending allocations on restart.
Some code cleanup:
* Use a field for setting EC2 metadata instead of env-vars in testing;
but keep environment variables for backward compatibility reasons
* Update tests to use testify
TestClient_UpdateNodeFromFingerprintKeepsConfig checks a test node
network interface, which is hardcoded to `eth0` and is updated
asynchronously. This causes flakiness when eth0 isn't available.
Here, we hardcode the value to an arbitrary network interface.
When spinning a second client, ensure that it uses new driver
instances, rather than reuse the already shutdown unhealthy drivers from
first instance.
This speeds up tests significantly, but cutting ~50 seconds or so, the
timeout in NewClient until drivers fingerprints. They never do because
drivers were shutdown already.
TestClient_RestoreError is very slow, taking ~81 seconds.
It has few problematic patterns. It's unclear what it tests, it
simulates a failure condition where all state db lookup fails and
asserts that alloc fails. Though starting from
https://github.com/hashicorp/nomad/pull/6216 , we don't fail allocs in
that condition but rather restart them.
Also, the drivers used in second client `c2` are the same singleton
instances used in `c1` and already shutdown. We ought to start healthy
new driver instances.
* client: improve group service stanza interpolation and check_restart support
Interpolation can now be done on group service stanzas. Note that some task runtime specific information
that was previously available when the service was registered poststart of a task is no longer available.
The check_restart stanza for checks defined on group services will now properly restart the allocation upon
check failures if configured.
Adds new package that can be used by client and server RPC endpoints to
facilitate monitoring based off of a logger
clean up old code
small comment about write
rm old comment about minsize
rename to Monitor
Removes connection logic from monitor command
Keep connection logic in endpoints, use a channel to send results from
monitoring
use new multisink logger and interfaces
small test for dropped messages
update go-hclogger and update sink/intercept logger interfaces
makeAllocTaskServices did not do a nil check on AllocatedResources
which causes a panic when upgrading directly from 0.8 to 0.10. While
skipping 0.9 is not supported we intend to fix serious crashers caused
by such upgrades to prevent cluster outages.
I did a quick audit of the client package and everywhere else that
accesses AllocatedResources appears to be properly guarded by a nil
check.
Fix a bug where a millicious user can access or manipulate an alloc in a
namespace they don't have access to. The allocation endpoints perform
ACL checks against the request namespace, not the allocation namespace,
and performs the allocation lookup independently from namespaces.
Here, we check that the requested can access the alloc namespace
regardless of the declared request namespace.
Ideally, we'd enforce that the declared request namespace matches
the actual allocation namespace. Unfortunately, we haven't documented
alloc endpoints as namespaced functions; we suspect starting to enforce
this will be very disruptive and inappropriate for a nomad point
release. As such, we maintain current behavior that doesn't require
passing the proper namespace in request. A future major release may
start enforcing checking declared namespace.
fixes https://github.com/hashicorp/nomad/issues/6382
The prestart hook for templates blocks while it resolves vault secrets.
If the secret is not found it continues to retry. If a task is shutdown
during this time, the prestart hook currently does not receive
shutdownCtxCancel, causing it to hang.
This PR joins the two contexts so either killCtx or shutdownCtx cancel
and stop the task.
In a job registration request, ensure that the request namespace "header" and job
namespace field match. This should be the case already in prod, as http
handlers ensures that the values match [1].
This mitigates bugs that exploit bugs where we may check a value but act
on another, resulting into bypassing ACL system.
[1] https://github.com/hashicorp/nomad/blob/v0.9.5/command/agent/job_endpoint.go#L415-L418
Currently, there is an issue when running on Windows whereby under some
circumstances the Windows stats API's will begin to return errors (such
as internal timeouts) when a client is under high load, and potentially
other forms of resource contention / system states (and other unknown
cases).
When an error occurs during this collection, we then short circuit
further metrics emission from the client until the next interval.
This can be problematic if it happens for a sustained number of
intervals, as our metrics aggregator will begin to age out older
metrics, and we will eventually stop emitting various types of metrics
including `nomad.client.unallocated.*` metrics.
However, when metrics collection fails on Linux, gopsutil will in many cases
(e.g cpu.Times) silently return 0 values, rather than an error.
Here, we switch to returning empty metrics in these failures, and
logging the error at the source. This brings the behaviour into line
with Linux/Unix platforms, and although making aggregation a little
sadder on intermittent failures, will result in more desireable overall
behaviour of keeping metrics available for further investigation if
things look unusual.
Some drivers will automatically create directories when trying to mount
a path into a container, but some will not.
To unify this behaviour, this commit requires that host volumes already exist,
and can be stat'd by the Nomad Agent during client startup.
Currently, using a Volume in a job uses the following configuration:
```
volume "alias-name" {
type = "volume-type"
read_only = true
config {
source = "host_volume_name"
}
}
```
This commit migrates to the following:
```
volume "alias-name" {
type = "volume-type"
source = "host_volume_name"
read_only = true
}
```
The original design was based due to being uncertain about the future of storage
plugins, and to allow maxium flexibility.
However, this causes a few issues, namely:
- We frequently need to parse this configuration during submission,
scheduling, and mounting
- It complicates the configuration from and end users perspective
- It complicates the ability to do validation
As we understand the problem space of CSI a little more, it has become
clear that we won't need the `source` to be in config, as it will be
used in the majority of cases:
- Host Volumes: Always need a source
- Preallocated CSI Volumes: Always needs a source from a volume or claim name
- Dynamic Persistent CSI Volumes*: Always needs a source to attach the volumes
to for managing upgrades and to avoid dangling.
- Dynamic Ephemeral CSI Volumes*: Less thought out, but `source` will probably point
to the plugin name, and a `config` block will
allow you to pass meta to the plugin. Or will
point to a pre-configured ephemeral config.
*If implemented
The new design simplifies this by merging the source into the volume
stanza to solve the above issues with usability, performance, and error
handling.
On macOS, `os.TempDir` returns a symlinked path under `/var` which is
outside of the directories shared into the VM used for Docker, and
that fails tests using Docker that need that mount. If we expand the
symlink to get the real path in `/private`, we're in the shared
folders and can safely mount them.
This is an attempt to ease dependency management for external driver
plugins, by avoiding requiring them to compile ugorji/go generated
files. Plugin developers reported some pain with the brittleness of
ugorji/go dependency in particular, specially when using go mod, the
default go mod manager in golang 1.13.
Context
--------
Nomad uses msgpack to persist and serialize internal structs, using
ugorji/go library. As an optimization, we use ugorji/go code generation
to speedup process and aovid the relection-based slow path.
We commit these generated files in repository when we cut and tag the
release to ease reproducability and debugging old releases. Thus,
downstream projects that depend on release tag, indirectly depends on
ugorji/go generated code.
Sadly, the generated code is brittle and specific to the version of
ugorji/go being used. When go mod picks another version of ugorji/go
then nomad (go mod by default uses release according to semver),
downstream projects face compilation errors.
Interestingly, downstream projects don't commonly serialize nomad
internal structs. Drivers and device plugins use grpc instead of
msgpack for the most part. In the few cases where they use msgpag (e.g.
decoding task config), they do without codegen path as they run on
driver specific structs not the nomad internal structs. Also, the
ugorji/go serialization through reflection is generally backward
compatible (mod some ugorji/go regression bugs that get introduced every
now and then :( ).
Proposal
---------
The proposal here is to keep committing ugorji/go codec generated files
for releases but to use a go tag for them.
All nomad development through the makefile, including releasing, CI and
dev flow, has the tag enabled.
Downstream plugin projects, by default, will skip these files and life
proceed as normal for them.
The downside is that nomad developers who use generated code but avoid
using make must start passing additional go tag argument. Though this
is not a blessed configuration.
Splitting the immutable and mutable components of the scriptCheck led
to a bug where the environment interpolation wasn't being incorporated
into the check's ID, which caused the UpdateTTL to update for a check
ID that Consul didn't have (because our Consul client creates the ID
from the structs.ServiceCheck each time we update).
Task group services don't have access to a task environment at
creation, so their checks get registered before the check can be
interpolated. Use the original check ID so they can be updated.
* ar: refactor network bridge config to use go-cni lib
* ar: use eth as the iface prefix for bridged network namespaces
* vendor: update containerd/go-cni package
* ar: update network hook to use TODO contexts when calling configurator
* unnecessary conversion
In Nomad prior to Consul Connect, all Consul checks work the same
except for Script checks. Because the Task being checked is running in
its own container namespaces, the check is executed by Nomad in the
Task's context. If the Script check passes, Nomad uses the TTL check
feature of Consul to update the check status. This means in order to
run a Script check, we need to know what Task to execute it in.
To support Consul Connect, we need Group Services, and these need to
be registered in Consul along with their checks. We could push the
Service down into the Task, but this doesn't work if someone wants to
associate a service with a task's ports, but do script checks in
another task in the allocation.
Because Nomad is handling the Script check and not Consul anyways,
this moves the script check handling into the task runner so that the
task runner can own the script check's configuration and
lifecycle. This will allow us to pass the group service check
configuration down into a task without associating the service itself
with the task.
When tasks are checked for script checks, we walk back through their
task group to see if there are script checks associated with the
task. If so, we'll spin off script check tasklets for them. The
group-level service and any restart behaviors it needs are entirely
encapsulated within the group service hook.
* connect: add unix socket to proxy grpc for envoy
Fixes#6124
Implement a L4 proxy from a unix socket inside a network namespace to
Consul's gRPC endpoint on the host. This allows Envoy to connect to
Consul's xDS configuration API.
* connect: pointer receiver on structs with mutexes
* connect: warn on all proxy errors
Nick Ethier