When the `-verbose` flag is passed to the `nomad volume status` command, we
hit a code path where the rows of text to be formatted were not initialized
correctly, resulting in a panic in the CLI.
This PR fixes a bug where modifying the upstreams of a Connect sidecar proxy
would not result Consul applying the changes, unless an additional change to
the job would trigger a task replacement (thus replacing the service definition).
The fix is to check if upstreams have been modified between Nomad's view of the
sidecar service definition, and the service definition for the sidecar that is
actually registered in Consul.
Fixes#8754
This PR fixes some job submission plumbing to make sure the Consul Check parameters
- failure_before_critical
- success_before_passing
work with group-level services. They already work with task-level services.
System and batch jobs don't create deployments, which means nomad tries
to monitor a non-existent deployment when it runs a job and outputs an
error message. This adds a check to make sure a deployment exists before
monitoring. Also fixes some formatting.
Co-authored-by: Tim Gross <tgross@hashicorp.com>
Glint pulled in an updated version of mitchellh/go-testing-interface
which broke some existing tests because the update added a Parallel()
method to testing.T. This switches to the standard library testing.TB
which doesn't have a Parallel() method.
Adding '-verbose' will print out the allocation information for the
deployment. This also changes the job run command so that it now blocks
until deployment is complete and adds timestamps to the output so that
it's more in line with the output of node drain.
This uses glint to print in place in running in a tty. Because glint
doesn't yet support cmd/powershell, Windows workflows use a different
library to print in place, which results in slightly different
formatting: 1) different margins, and 2) no spinner indicating
deployment in progress.
(cherry-pick ent back to oss)
This PR moves a lot of Consul ACL token validation tests into ent files,
so that we can verify correct behavior difference between OSS and ENT
Nomad versions.
This PR fixes the Nomad Object Namespace <-> Consul ACL Token relationship
check when using Consul OSS (or Consul ENT without namespace support).
Nomad v1.1.0 introduced a regression where Nomad would fail the validation
when submitting Connect jobs and allow_unauthenticated set to true, with
Consul OSS - because it would do the namespace check against the Consul ACL
token assuming the "default" namespace, which does not work because Consul OSS
does not have namespaces.
Instead of making the bad assumption, expand the namespace check to handle
each special case explicitly.
Fixes#10718
This PR changes Nomad's wrapper around the Consul NamespaceAPI so that
it will detect if the Consul Namespaces feature is enabled before making
a request to the Namespaces API. Namespaces are not enabled in Consul OSS,
and require a suitable license to be used with Consul ENT.
Previously Nomad would check for a 404 status code when makeing a request
to the Namespaces API to "detect" if Consul OSS was being used. This does
not work for Consul ENT with Namespaces disabled, which returns a 500.
Now we avoid requesting the namespace API altogether if Consul is detected
to be the OSS sku, or if the Namespaces feature is not licensed. Since
Consul can be upgraded from OSS to ENT, or a new license applied, we cache
the value for 1 minute, refreshing on demand if expired.
Fixes https://github.com/hashicorp/nomad-enterprise/issues/575
Note that the ticket originally describes using attributes from https://github.com/hashicorp/nomad/issues/10688.
This turns out not to be possible due to a chicken-egg situation between
bootstrapping the agent and setting up the consul client. Also fun: the
Consul fingerprinter creates its own Consul client, because there is no
[currently] no way to pass the agent's client through the fingerprint factory.
This PR implements first-class support for Nomad running Consul
Connect Mesh Gateways. Mesh gateways enable services in the Connect
mesh to make cross-DC connections via gateways, where each datacenter
may not have full node interconnectivity.
Consul docs with more information:
https://www.consul.io/docs/connect/gateways/mesh-gateway
The following group level service block can be used to establish
a Connect mesh gateway.
service {
connect {
gateway {
mesh {
// no configuration
}
}
}
}
Services can make use of a mesh gateway by configuring so in their
upstream blocks, e.g.
service {
connect {
sidecar_service {
proxy {
upstreams {
destination_name = "<service>"
local_bind_port = <port>
datacenter = "<datacenter>"
mesh_gateway {
mode = "<mode>"
}
}
}
}
}
}
Typical use of a mesh gateway is to create a bridge between datacenters.
A mesh gateway should then be configured with a service port that is
mapped from a host_network configured on a WAN interface in Nomad agent
config, e.g.
client {
host_network "public" {
interface = "eth1"
}
}
Create a port mapping in the group.network block for use by the mesh
gateway service from the public host_network, e.g.
network {
mode = "bridge"
port "mesh_wan" {
host_network = "public"
}
}
Use this port label for the service.port of the mesh gateway, e.g.
service {
name = "mesh-gateway"
port = "mesh_wan"
connect {
gateway {
mesh {}
}
}
}
Currently Envoy is the only supported gateway implementation in Consul.
By default Nomad client will run the latest official Envoy docker image
supported by the local Consul agent. The Envoy task can be customized
by setting `meta.connect.gateway_image` in agent config or by setting
the `connect.sidecar_task` block.
Gateways require Consul 1.8.0+, enforced by the Nomad scheduler.
Closes#9446
In this loop, we ought to close the websocket connection gracefully when
the StreamErrWrapper reaches EOF.
Previously, it's possible that that we drop the last few events or skip sending
the websocket closure. If `handler(handlerPipe)` returns and `cancel` is called,
before the loop here completes processing streaming events, the loop exits
prematurely without propagating the last few events.
Instead here, the loop continues until we hit `httpPipe` EOF (through
`decoder.Decode`), to ensure we process the events to completion.
When a wildcard namespace is used for `nomad job` commands that support prefix
matching, avoid asking the user for input if a prefix is an unambiguous exact
match so that the behavior is similar to the commands using a specific or
unset namespace.
The websocket interface used for `alloc exec` has to silently drop client send
errors because otherwise those errors would interleave with the streamed
output. But we may be able to surface errors that cause terminated websockets
a little better in the HTTP server logs.
The `Terminates At` field can't be removed from the struct for backwards
compatibility reasons, but there's no purpose to it anymore so we shouldn't be
showing it to end users of the command.
This PR adds e2e tests for Consul Namespaces for Nomad Enterprise
with Consul ACLs enabled.
Needed to add support for Consul ACL tokens with `namespace` and
`namespace_prefix` blocks, which Nomad parses and validates before
tossing the token. These bits will need to be picked back to OSS.
ParentID is an internal field that Nomad sets for dispatched or parameterized jobs. Job submitters should not be able to set it directly, as that messes up children tracking.
Fixes#10422 . It specifically stops the scheduler from honoring the ParentID. The reason failure and why the scheduler didn't schedule that job once it was created is very interesting and requires follow up with a more technical issue.
Add templating to `network-interface` option.
This PR also adds a fast-fail to in the case where an invalid interface is set or produced by the template
* add tests and check for valid interface
* Add documentation
* Incorporate suggestions from code review
Co-authored-by: Luiz Aoqui <luiz@hashicorp.com>
(cherry-picked from ent without _ent things)
This is part 2/4 of e2e tests for Consul Namespaces. Took a
first pass at what the parameterized tests can look like, but
only on the ENT side for this PR. Will continue to refactor
in the next PRs.
Also fixes 2 bugs:
- Config Entries registered by Nomad Server on job registration
were not getting Namespace set
- Group level script checks were not getting Namespace set
Those changes will need to be copied back to Nomad OSS.
Nomad OSS + no ACLs (previously, needs refactor)
Nomad ENT + no ACLs (this)
Nomad OSS + ACLs (todo)
Nomad ENT + ALCs (todo)
This PR introduces the /v1/search/fuzzy API endpoint, used for fuzzy
searching objects in Nomad. The fuzzy search endpoint routes requests
to the Nomad Server leader, which implements the Search.FuzzySearch RPC
method.
Requests to the fuzzy search API are based on the api.FuzzySearchRequest
object, e.g.
{
"Text": "ed",
"Context": "all"
}
Responses from the fuzzy search API are based on the api.FuzzySearchResponse
object, e.g.
{
"Index": 27,
"KnownLeader": true,
"LastContact": 0,
"Matches": {
"tasks": [
{
"ID": "redis",
"Scope": [
"default",
"example",
"cache"
]
}
],
"evals": [],
"deployment": [],
"volumes": [],
"scaling_policy": [],
"images": [
{
"ID": "redis:3.2",
"Scope": [
"default",
"example",
"cache",
"redis"
]
}
]
},
"Truncations": {
"volumes": false,
"scaling_policy": false,
"evals": false,
"deployment": false
}
}
The API is tunable using the new server.search stanza, e.g.
server {
search {
fuzzy_enabled = true
limit_query = 200
limit_results = 1000
min_term_length = 5
}
}
These values can be increased or decreased, so as to provide more
search results or to reduce load on the Nomad Server. The fuzzy search
API can be disabled entirely by setting `fuzzy_enabled` to `false`.
on Linux systems this is derived from the configure cpuset cgroup parent (defaults to /nomad)
for non Linux systems and Linux systems where cgroups are not enabled, the client defaults to using all cores
James Rasell