Adopts [`go-changelog`](https://github.com/hashicorp/go-changelog) for managing Nomad's changelog. `go-changelog` is becoming the HashiCorp defacto standard tool for managing changelog, e.g. [Consul](https://github.com/hashicorp/consul/pull/8387), [Vault](https://github.com/hashicorp/vault/pull/10363), [Waypoint](https://github.com/hashicorp/waypoint/pull/1179). [Consul](https://github.com/hashicorp/consul/pull/8387) seems to be the first product to adopt it, and its PR has the most context - though I've updated `.changelog/README.md` with the relevant info here.
## Changes to developers workflow
When opening PRs, developers should add a changelog entry in `.changelog/<PR#>.txt`. Check [`.changelog/README.md`](https://github.com/hashicorp/nomad/blob/docs-adopt-gochangelog/.changelog/README.md#developer-guide).
For the WIP release, entries can be amended even after the PR merged, and new files may be added post-hoc (e.g. during transition period, missed accidentally, community PRs, etc).
### Transitioning
Pending PRs can start including the changelog entry files immediately.
For 1.1.3/1.0.9 cycle, the release coordinator should create the entries for any PR that gets merged without a changelog entry file. They should also move any 1.1.3 entry in CHANGELOG.md to a changelog entry file, as this PR done for GH-10818.
## Changes to release process
Before cutting a release, release coordinator should update the changelog by inserting the output of `make changelog` to CHANGELOG.md with appropriate headers. See [`.changelog/README.md`](https://github.com/hashicorp/nomad/blob/docs-adopt-gochangelog/.changelog/README.md#how-to-generate-changelog-entries-for-release) for more details.
## Details
go-changelog is a basic templating engine for maintaining changelog in HashiCorp environment.
It expects the changelog entries as files indexed by their PR number. The CLI generates the changelog section for a release by comparing two git references (e.g. `HEAD` and the latest release, e.g. `v1.1.2`), and still requires manual process for updating CHANGELOG.md and final formatting.
The approach has many nice advantages:
* Avoids changelog related merge conflicts: Each PR touches different file!
* Copes with amendments and post-PR updates: Just add or update a changelog entry file using the original PR numbers.
* Addresses the release backporting scenario: Cherry-picking PRs will cherry-pick the relevant changelog entry automatically!
* Only relies on data available through `git` - no reliance on GitHub metadata or require GitHub credentials
The approach has few downsides though:
* CHANGELOG.md going stale during development and must be updated manually before cutting the release
* Repository watchers can no longer glance at the CHANGELOG.md to see upcoming changes
* We can periodically update the file, but `go-changelog` tool does not aid with that
* `go-changelog` tool does not offer good error reporting. If an entry is has an invalid tag (e.g. uses `release-note:bugfix` instead of `release-note:bug`), the entry will be dropped silently
* We should update go-changelog to warn against unexpected entry tags
* TODO: Meanwhile, PR reviewers and release coordinators should watch out
## Potential follow ups
We should follow up with CI checks to ensure PR changes include a warning. I've opted not to include that now. We still make many non-changelog-worth PRs for website/docs, for large features that get merged in multiple small PRs. I did not want to include a check that fails often.
Also, we should follow up to have `go-changelog` emit better warnings on unexpected tag.
The `docker` driver's `port_map` field was deprecated in 0.12 and this is
documented in the task driver's docs, but we never explicitly flagged it for
backwards compatibility.
This PR makes it so that Nomad will automatically set the CONSUL_TLS_SERVER_NAME
environment variable for Connect native tasks running in bridge networking mode
where Consul has TLS enabled. Because of the use of a unix domain socket for
communicating with Consul when in bridge networking mode, the server name is
a file name instead of something compatible with the mTLS certificate Consul
will authenticate against. "localhost" is by default a compatible name, so Nomad
will set the environment variable to that.
Fixes#10804
When the `-verbose` flag is passed to the `nomad volume status` command, we
hit a code path where the rows of text to be formatted were not initialized
correctly, resulting in a panic in the CLI.
This PR adds validation during job submission that Connect proxy upstreams
within a task group are using different listener addresses. Otherwise, a
duplicate envoy listener will be created and not be able to bind.
Closes#7833
When `network.mode = "bridge"`, we create a pause container in Docker with no
networking so that we have a process to hold the network namespace we create
in Nomad. The default `/etc/hosts` file of that pause container is then used
for all the Docker tasks that share that network namespace. Some applications
rely on this file being populated.
This changeset generates a `/etc/hosts` file and bind-mounts it to the
container when Nomad owns the network, so that the container's hostname has an
IP in the file as expected. The hosts file will include the entries added by
the Docker driver's `extra_hosts` field.
In this changeset, only the Docker task driver will take advantage of this
option, as the `exec`/`java` drivers currently copy the host's `/etc/hosts`
file and this can't be changed without breaking backwards compatibility. But
the fields are available in the task driver protobuf for community task
drivers to use if they'd like.
This PR fixes some job submission plumbing to make sure the Consul Check parameters
- failure_before_critical
- success_before_passing
work with group-level services. They already work with task-level services.
The `QuotaIterator` is used as the source of nodes passed into feasibility
checking for constraints. Every node that passes the quota check counts the
allocation resources agains the quota, and as a result we count nodes which
will be later filtered out by constraints. Therefore for jobs with
constraints, nodes that are feasibility checked but fail have been counted
against quotas. This failure mode is order dependent; if all the unfiltered
nodes happen to be quota checked first, everything works as expected.
This changeset moves the `QuotaIterator` to happen last among all feasibility
checkers (but before ranking). The `QuotaIterator` will never receive filtered
nodes so it will calculate quotas correctly.
This PR changes Nomad's wrapper around the Consul NamespaceAPI so that
it will detect if the Consul Namespaces feature is enabled before making
a request to the Namespaces API. Namespaces are not enabled in Consul OSS,
and require a suitable license to be used with Consul ENT.
Previously Nomad would check for a 404 status code when makeing a request
to the Namespaces API to "detect" if Consul OSS was being used. This does
not work for Consul ENT with Namespaces disabled, which returns a 500.
Now we avoid requesting the namespace API altogether if Consul is detected
to be the OSS sku, or if the Namespaces feature is not licensed. Since
Consul can be upgraded from OSS to ENT, or a new license applied, we cache
the value for 1 minute, refreshing on demand if expired.
Fixes https://github.com/hashicorp/nomad-enterprise/issues/575
Note that the ticket originally describes using attributes from https://github.com/hashicorp/nomad/issues/10688.
This turns out not to be possible due to a chicken-egg situation between
bootstrapping the agent and setting up the consul client. Also fun: the
Consul fingerprinter creates its own Consul client, because there is no
[currently] no way to pass the agent's client through the fingerprint factory.
When `nomad volume create` was introduced in Nomad 1.1.0, we changed the
volume spec to take a list of capabilities rather than a single capability, to
meet the requirements of the CSI spec. When a volume is registered via `nomad
volume register`, we should be using the same fields to validate the volume
with the controller plugin.
This PR adds two additional constraints on Connect sidecar and gateway tasks,
making sure Nomad schedules them only onto nodes where Connect is actually
enabled on the Consul agent.
Consul requires `connect.enabled = true` and `ports.grpc = <number>` to be
explicitly set on agent configuration before Connect APIs will work. Until
now, Nomad would only validate a minimum version of Consul, which would cause
confusion for users who try to run Connect tasks on nodes where Consul is not
yet sufficiently configured. These contstraints prevent job scheduling on nodes
where Connect is not actually use-able.
Closes#10700
When a wildcard namespace is used for `nomad job` commands that support prefix
matching, avoid asking the user for input if a prefix is an unambiguous exact
match so that the behavior is similar to the commands using a specific or
unset namespace.
Adds clarification to `nomad volume create` commands around how the `volume`
block in the jobspec overrides this behavior. Adds missing section to `nomad
volume register` and to example volume spec for both commands.
The default Linux Capabilities set enabled by the docker, exec, and
java task drivers includes CAP_NET_RAW (for making ping just work),
which has the side affect of opening an ARP DoS/MiTM attack between
tasks using bridge networking on the same host network.
https://docs.docker.com/engine/reference/run/#runtime-privilege-and-linux-capabilities
This PR disables CAP_NET_RAW for the docker, exec, and java task
drivers. The previous behavior can be restored for docker using the
allow_caps docker plugin configuration option.
A future version of nomad will enable similar configurability for the
exec and java task drivers.
This PR uses the checksum of the check for which a dynamic exposed
port is being generated (instead of a UUID prefix) so that the
generated port label is deterministic.
This fixes 2 bugs:
- 'job plan' output is now idempotent for jobs making use of injected ports
- tasks will no longer be destructively updated when jobs making use of
injected ports are re-run without changing any user specified part of
job config.
Closes: https://github.com/hashicorp/nomad/issues/10099
This is the first step in #10268. If a maximum is not specified, the
task group sum uses the memory number instead. The maximum is only
shown when it’s higher than the memory sum.
This updates the UI to use the new fuzzy search API. It’s a drop-in
replacement so the / shortcut to jump to search is preserved, and
results can be cycled through and chosen via arrow keys and the
enter key.
It doesn’t use everything returned by the API:
* deployments and evaluations: these match by id, doesn’t seem like
people would know those or benefit from quick navigation to them
* namespaces: doesn’t seem useful as they currently function
* scaling policies
* tasks: the response doesn’t include an allocation id, which means they
can’t be navigated to in the UI without an additional query
* CSI volumes: aren’t actually returned by the API
Since there’s no API to check the server configuration and know whether
the feature has been disabled, this adds another query in
route:application#beforeModel that acts as feature detection: if the
attempt to query fails (500), the global search field is hidden.
Upon having added another query on load, I realised that beforeModel was
being triggered any time service:router#transitionTo was being called,
which happens upon navigating to a search result, for instance, because
of refreshModel being present on the region query parameter. This PR
adds a check for transition.queryParamsOnly and skips rerunning the
onload queries (token permissions check, license check, fuzzy search
feature detection).
Implementation notes:
* there are changes to unrelated tests to ignore the on-load feature
detection query
* some lifecycle-related guards against undefined were required to
address failures when navigating to an allocation
* the minimum search length of 2 characters is hard-coded as there’s
currently no way to determine min_term_length in the UI
This PR fixes a bug where Nomad was more restrictive on Ingress Gateway Configuration
Entry definitions than Consul. Before, Nomad would not allow for declaring IGCEs with
http listeners with service name "*", which is a special feature allowable by Consul.
Note: to make http protocol work, a service-default must be defined setting the
protocol to http for each service.
Fixes: #9729
This PR adds job-submission validation that checks for the use of uppercase characters
in group and service names for services that make use of Consul Connect. This prevents
attempting to launch services that Consul will not validate correctly, which in turn
causes tasks to fail to launch in Nomad.
Underlying Consul issue: https://github.com/hashicorp/consul/issues/6765Closes#7581#10450
This PR wraps the use of the consul envoy bootstrap command in
an expoenential backoff closure, configured to timeout after 60
seconds. This is an increase over the current behavior of making
3 attempts over 6 seconds.
Should help with #10451
This adds a Revert two-step button to the JobVersions component for
not-current versions, which redirects to the overview on success. It
checks the job version before and after reversion to mitigate the edge
case where reverting to an otherwise-identical version has no effect, as
discussed in #10337.
It uses existing facilities for handling other errors and disabling the
button when permissions are lacking.
This PR introduces the /v1/search/fuzzy API endpoint, used for fuzzy
searching objects in Nomad. The fuzzy search endpoint routes requests
to the Nomad Server leader, which implements the Search.FuzzySearch RPC
method.
Requests to the fuzzy search API are based on the api.FuzzySearchRequest
object, e.g.
{
"Text": "ed",
"Context": "all"
}
Responses from the fuzzy search API are based on the api.FuzzySearchResponse
object, e.g.
{
"Index": 27,
"KnownLeader": true,
"LastContact": 0,
"Matches": {
"tasks": [
{
"ID": "redis",
"Scope": [
"default",
"example",
"cache"
]
}
],
"evals": [],
"deployment": [],
"volumes": [],
"scaling_policy": [],
"images": [
{
"ID": "redis:3.2",
"Scope": [
"default",
"example",
"cache",
"redis"
]
}
]
},
"Truncations": {
"volumes": false,
"scaling_policy": false,
"evals": false,
"deployment": false
}
}
The API is tunable using the new server.search stanza, e.g.
server {
search {
fuzzy_enabled = true
limit_query = 200
limit_results = 1000
min_term_length = 5
}
}
These values can be increased or decreased, so as to provide more
search results or to reduce load on the Nomad Server. The fuzzy search
API can be disabled entirely by setting `fuzzy_enabled` to `false`.
This PR adds the common OSS changes for adding support for Consul Namespaces,
which is going to be a Nomad Enterprise feature. There is no new functionality
provided by this changeset and hopefully no new bugs.
