plugins/driver: update driver interface to support streaming stats
client/tr: use streaming stats api
TODO:
* how to handle errors and closed channel during stats streaming
* prevent tight loop if Stats(ctx) returns an error
drivers: update drivers TaskStats RPC to handle streaming results
executor: better error handling in stats rpc
docker: better control and error handling of stats rpc
driver: allow stats to return a recoverable error
This PR fixes various instances of plugins being launched without using
the parent loggers. This meant that logs would not all go to the same
output, break formatting etc.
This PR improves how killing a task is handled. Before the kill function
directly orchestrated the killing and was only valid while the task was
running. The new behavior is to mark the desired state and wait for the
task runner to converge to that state.
We were just emitting Killed/Terminated events before. In v0.8 we
emitted Killing/Killed, but lacked Terminated when explicitly stopping
a task. This change makes it so Terminated is always included, whether
explicitly stopping a task or it exiting on its own.
New output:
2019-01-04T14:58:51-08:00 Killed Task successfully killed
2019-01-04T14:58:51-08:00 Terminated Exit Code: 130, Signal: 2
2019-01-04T14:58:51-08:00 Killing Sent interrupt
2019-01-04T14:58:51-08:00 Leader Task Dead Leader Task in Group dead
2019-01-04T14:58:49-08:00 Started Task started by client
2019-01-04T14:58:49-08:00 Task Setup Building Task Directory
2019-01-04T14:58:49-08:00 Received Task received by client
Old (v0.8.6) output:
2019-01-04T22:14:54Z Killed Task successfully killed
2019-01-04T22:14:54Z Killing Sent interrupt. Waiting 5s before force killing
2019-01-04T22:14:54Z Leader Task Dead Leader Task in Group dead
2019-01-04T22:14:53Z Started Task started by client
2019-01-04T22:14:53Z Task Setup Building Task Directory
2019-01-04T22:14:53Z Received Task received by client
Simplify allocDir.Build() function to avoid depending on client/structs,
and remove a parameter that's always set to `false`.
The motivation here is to avoid a dependency cycle between
drivers/cstructs and alloc_dir.
**The Bug:**
You may have seen log lines like this when running 0.9.0-dev:
```
... client.alloc_runner.task_runner: some environment variables not available for rendering: ... keys="attr.driver.docker.volumes.enabled, attr.driver.docker.version, attr.driver.docker.bridge_ip, attr.driver.qemu.version"
```
Not only should we not be erroring on builtin driver attributes, but the
results were nondeterministic due to map iteration order!
The root cause is that we have an old root attribute for all drivers
like:
```
attr.driver.docker = "1"
```
When attributes were opaque variable names it was fine to also have
"nested" attributes like:
```
attr.driver.docker.version = "1.2.3"
```
However in the HCLv2 world the variable names are no longer opaque: they
form an object tree. The `docker` object can no longer both hold a value
(`"1"`) *and* nested attributes (`version = "1.2.3"`).
**The Fix:**
Since the old `attr.driver.<name> = "1"` attribues are useless for task
config interpolation, create a new precedence rule for creating the task
config evaluation context:
*Maps take precedence over primitives.*
This means `attr.driver.docker.version` will always take precedence over
`attr.driver.docker`. The results are determinstic and give users access
to the more useful metadata.
I made this a general precedence rule instead of special-casing driver
attrs because it seemed like better default behavior than spamming
WARNings to logs that were likely unactionable by users.
Unfortunately I don't know how to test these errors. As far as I can
tell they should only happen if there was a programming error in the
upgrade code or the underlying boltdb was corrupted somehow.
* Prefix task bucket with task- to prevent name conflicts
* Shorten device manager bucket name
* Remove commented out outdated var
* Update layout comment
The driver manager is modeled after the device manager and is started by the client.
It's responsible for handling driver lifecycle and reattachment state, as well as
processing the incomming fingerprint and task events from each driver. The mananger
exposes a method for registering event handlers for task events that is used by the
task runner to update the server when a task has been updated with an event.
Since driver fingerprinting has been implemented by the driver manager, it is no
longer needed in the fingerprint mananger and has been removed.
The RestartCount is not really suitable for use as a source of
uniqueness within task invocations as it is not monotonic, and interacts
with the restart stanza in a users config, so conflates restarts due to
task failures, with restarts due to enviromental changes, such as consul
template or vault secrets changing.
Here we instead use a substring from a uuid, which is more random than
we strictly need, but is nicer than rolling our own random string
generator here.
This creates a new buffered channel and goroutine on the allocrunner for
serializing updates to allocations. This allows us to take updates off
the routine that is used from processing updates from the server,
without having complicated machinery for tracking update lifetimes, or
other external synchronization.
This results in a nice performance improvement and signficantly better
throughput on batch changes such as preempting a large number of jobs
for a larger placement.
This commit reduces the locking required to shutdown or destroy
allocrunners, and allows parallel shutdown and destroy of allocrunners during
shutdown.
The assertion here is causing many spurious failures that aren't
actually relevant to the test itself.
We are tracking the cause for this failure independently, and it would
make more sense to have a dedicated test for clean shutdown.
Currently, there is a race condition between creating a taskrunner, and
updating node attributes via fingerprinting.
This is because the taskenv builder will try to iterate over the
clientconfig.Node.Attributes map, which can be concurrently updated by
the fingerprinting process, thus causing a panic.
This fixes that by providing a copy of the clientconfg to the
allocrunner inside the Read lock during config creation.
The allocLock is used to synchronize access to the alloc runner map, not
to ensure internal consistency of the alloc runners themselves. This
updates the updateAlloc process to avoid hanging on to an exclusive lock
of the map while applying changes to allocrunners themselves, as they
should be internally consistent.
This fixes a bug where any client allocation api will block during the
shutdown or updating of an allocrunner and its child taskrunners.
Fixes a bug where a driver health and attributes are never updated from
their initial status. If a driver started unhealthy, it may never go
into a healthy status.
Noticed few places where tests seem to block indefinitely and panic
after the test run reaches the test package timeout.
I intend to follow up with the proper fix later, but timing out is much
better than indefinitely blocking.
When starting an allocation that is preempting other allocs, we create a
new group allocation watcher, and then wait for the allocations to
terminate in the allocation PreRun hooks.
If there's no preempted allocations, then we simply provide a
NoopAllocWatcher.
The Group Alloc watcher is an implementation of a PrevAllocWatcher that
can wait for multiple previous allocs before terminating.
This is to be used when running an allocation that is preempting upstream
allocations, and thus only supports being ran with a local alloc watcher.
It also currently requires all of its child watchers to correctly handle
context cancellation. Should this be a problem, it should be fairly easy
to implement a replacement using channels rather than a waitgroup.
It obeys the PrevAllocWatcher interface for convenience, but it may be
better to extract Migration capabilities into a seperate interface for
greater clarity.
As of now, FileRotator uses bufio.Write under the hood to write data to
configured output file. Due to the way how bufio handles any occurred io
error - saves it into `err` variable never resetting it automatically -
any operation like `Write`, `Flush` etc will become a no-op, returning the very same,
saved error (eg. Out of disk space) even when the problem is fixed (eg. disk
space is available again).
That automatically means that FileRotator will stop writing any logs,
reporting the same error over and over again, even if it's no longer
valid.
This PR fixes it by resetting the bufio Writer, which resets any errors
and tries to write requested data.
IOPS have been modelled as a resource since Nomad 0.1 but has never
actually been detected and there is no plan in the short term to add
detection. This is because IOPS is a bit simplistic of a unit to define
the performance requirements from the underlying storage system. In its
current state it adds unnecessary confusion and can be removed without
impacting any users. This PR leaves IOPS defined at the jobspec parsing
level and in the api/ resources since these are the two public uses of
the field. These should be considered deprecated and only exist to allow
users to stop using them during the Nomad 0.9.x release. In the future,
there should be no expectation that the field will exist.
The previous integration test was broken during the client refactor, and
it seems to be some sort of race with state updating.
I'm going to try and construct a replacement test as part of work on
performance, but for now, the underlying behaviour is still being
tested.
This removes a cyclical dependency when importing client/structs from
dependencies of the plugin_loader, specifically, drivers. Due to
client/config also depending on the plugin_loader.
It also better reflects the ownership of fingerprint structs, as they
are fairly internal to the fingerprint manager.
The logging package is used by logmon and the legacy mock_driver. Because the
legacy drivers are going away, I'm moving it here to signify its actual
ownership.
As part of deprecating legacy drivers, we're moving the env package to a
new drivers/shared tree, as it is used by the modern docker and rkt
driver packages, and is useful for 3rd party plugins.
Looking at NewTaskRunner I'm unsure whether TaskRunner.TaskResources
(from which req.TaskResources is set) is intended to be nil at times or
if the TODO in NewTaskRunner is intended to ensure it is always non-nil.
The old approach was incomplete. Hook env vars are now:
* persisted and restored between agent restarts
* deterministic (LWW if 2 hooks set the same key)
This PR introduces a device hook that retrieves the device mount
information for an allocation. It also updates the computed node class
computation to take into account devices.
TODO Fix the task runner unit test. The environment variable is being
lost even though it is being properly set in the prestart hook.
The group utility struct does not support asynchronously launched
goroutines (goroutines-inside-of-goroutines), so switch those uses to a
normal go call.
This means watchNodeUpdates and watchNodeEvents may not be shutdown when
Shutdown() exits. During nomad agent shutdown this does not matter.
During tests this means a test may leak those goroutines or be unable to
know when those goroutines have exited.
Since there's no runtime impact and these goroutines do not affect alloc
state syncing it seems ok to risk leaking them.
We were incorrectly returning a 0 duration to the taskrunner when
determining when a task should restart. This would cause tasks to be
restarted immediately, ignoring the restart {} stanza in a users
configuration.
This commit causes us to return the restart duration to the task runner
so it may correctly delay further execution.
This change makes few compromises:
* Looks up the devices associated with tasks at look up time. Given
that `nomad alloc status` is called rarely generally (compared to stats
telemetry and general job reporting), it seems fine. However, the
lookup overhead grows bounded by number of `tasks x total-host-devices`,
which can be significant.
* `client.Client` performs the task devices->statistics lookup. It
passes self to alloc/task runners so they can look up the device statistics
allocated to them.
* Currently alloc/task runners are responsible for constructing the
entire RPC response for stats
* The alternatives for making task runners device statistics aware
don't seem appealing (e.g. having task runners contain reference to hostStats)
* On the alloc aggregation resource usage, I did a naive merging of task device statistics.
* Personally, I question the value of such aggregation, compared to
costs of struct duplication and bloating the response - but opted to be
consistent in the API.
* With naive concatination, device instances from a single device group used by separate tasks in the alloc, would be aggregated in two separate device group statistics.
Michael Schurter