* changes necessary to support oss licesning shims
revert nomad fmt changes
update test to work with enterprise changes
update tests to work with new ent enforcements
make check
update cas test to use scheduler algorithm
back out preemption changes
add comments
* remove unused method
This changeset implements a periodic garbage collection of CSI volumes
with missing allocations. This can happen in a scenario where a node
update fails partially and the allocation updates are written to raft
but the evaluations to GC the volumes are dropped. This feature will
cover this edge case and ensure that upgrades from 0.11.0 and 0.11.1
get any stray claims cleaned up.
This changeset implements a periodic garbage collection of unused CSI
plugins. Plugins are self-cleaning when the last allocation for a
plugin is stopped, but this feature will cover any missing edge cases
and ensure that upgrades from 0.11.0 and 0.11.1 get any stray plugins
cleaned up.
Some tests assert on numbers on numbers of servers, e.g.
TestHTTP_AgentSetServers and TestHTTP_AgentListServers_ACL . Though, in dev and
test modes, the agent starts with servers having duplicate entries for
advertised and normalized RPC values, then settles with one unique value after
Raft/Serf re-sets servers with one single unique value.
This leads to flakiness, as the test will fail if assertion runs before Serf
update takes effect.
Here, we update the inital dev handling so it only adds a unique value if the
advertised and normalized values are the same.
Sample log lines illustrating the problem:
```
=== CONT TestHTTP_AgentSetServers
TestHTTP_AgentSetServers: testlog.go:34: 2020-04-06T21:47:51.016Z [INFO] nomad.raft: initial configuration: index=1 servers="[{Suffrage:Voter ID:127.0.0.1:9008 Address:127.0.0.1:9008}]"
TestHTTP_AgentSetServers: testlog.go:34: 2020-04-06T21:47:51.016Z [INFO] nomad: serf: EventMemberJoin: TestHTTP_AgentSetServers.global 127.0.0.1
TestHTTP_AgentSetServers: testlog.go:34: 2020-04-06T21:47:51.035Z [DEBUG] client.server_mgr: new server list: new_servers=[127.0.0.1:9008, 127.0.0.1:9008] old_servers=[]
...
TestHTTP_AgentSetServers: agent_endpoint_test.go:759:
Error Trace: agent_endpoint_test.go:759
http_test.go:1089
agent_endpoint_test.go:705
Error: "[127.0.0.1:9008 127.0.0.1:9008]" should have 1 item(s), but has 2
Test: TestHTTP_AgentSetServers
```
Enable configuration of HTTP and gRPC endpoints which should be exposed by
the Connect sidecar proxy. This changeset is the first "non-magical" pass
that lays the groundwork for enabling Consul service checks for tasks
running in a network namespace because they are Connect-enabled. The changes
here provide for full configuration of the
connect {
sidecar_service {
proxy {
expose {
paths = [{
path = <exposed endpoint>
protocol = <http or grpc>
local_path_port = <local endpoint port>
listener_port = <inbound mesh port>
}, ... ]
}
}
}
stanza. Everything from `expose` and below is new, and partially implements
the precedent set by Consul:
https://www.consul.io/docs/connect/registration/service-registration.html#expose-paths-configuration-reference
Combined with a task-group level network port-mapping in the form:
port "exposeExample" { to = -1 }
it is now possible to "punch a hole" through the network namespace
to a specific HTTP or gRPC path, with the anticipated use case of creating
Consul checks on Connect enabled services.
A future PR may introduce more automagic behavior, where we can do things like
1) auto-fill the 'expose.path.local_path_port' with the default value of the
'service.port' value for task-group level connect-enabled services.
2) automatically generate a port-mapping
3) enable an 'expose.checks' flag which automatically creates exposed endpoints
for every compatible consul service check (http/grpc checks on connect
enabled services).
allow oss to parse sink duration
clean up audit sink parsing
ent eventer config reload
fix typo
SetEnabled to eventer interface
client acl test
rm dead code
fix failing test
This change updates tests to honor `BootstrapExpect` exclusively when
forming test clusters and removes test only knobs, e.g.
`config.DevDisableBootstrap`.
Background:
Test cluster creation is fragile. Test servers don't follow the
BootstapExpected route like production clusters. Instead they start as
single node clusters and then get rejoin and may risk causing brain
split or other test flakiness.
The test framework expose few knobs to control those (e.g.
`config.DevDisableBootstrap` and `config.Bootstrap`) that control
whether a server should bootstrap the cluster. These flags are
confusing and it's unclear when to use: their usage in multi-node
cluster isn't properly documented. Furthermore, they have some bad
side-effects as they don't control Raft library: If
`config.DevDisableBootstrap` is true, the test server may not
immediately attempt to bootstrap a cluster, but after an election
timeout (~50ms), Raft may force a leadership election and win it (with
only one vote) and cause a split brain.
The knobs are also confusing as Bootstrap is an overloaded term. In
BootstrapExpect, we refer to bootstrapping the cluster only after N
servers are connected. But in tests and the knobs above, it refers to
whether the server is a single node cluster and shouldn't wait for any
other server.
Changes:
This commit makes two changes:
First, it relies on `BootstrapExpected` instead of `Bootstrap` and/or
`DevMode` flags. This change is relatively trivial.
Introduce a `Bootstrapped` flag to track if the cluster is bootstrapped.
This allows us to keep `BootstrapExpected` immutable. Previously, the
flag was a config value but it gets set to 0 after cluster bootstrap
completes.
Nomad jobs may be configured with a TaskGroup which contains a Service
definition that is Consul Connect enabled. These service definitions end
up establishing a Consul Connect Proxy Task (e.g. envoy, by default). In
the case where Consul ACLs are enabled, a Service Identity token is required
for these tasks to run & connect, etc. This changeset enables the Nomad Server
to recieve RPC requests for the derivation of SI tokens on behalf of instances
of Consul Connect using Tasks. Those tokens are then relayed back to the
requesting Client, which then injects the tokens in the secrets directory of
the Task.
Introduce limits to prevent unauthorized users from exhausting all
ephemeral ports on agents:
* `{https,rpc}_handshake_timeout`
* `{http,rpc}_max_conns_per_client`
The handshake timeout closes connections that have not completed the TLS
handshake by the deadline (5s by default). For RPC connections this
timeout also separately applies to first byte being read so RPC
connections with TLS enabled have `rpc_handshake_time * 2` as their
deadline.
The connection limit per client prevents a single remote TCP peer from
exhausting all ephemeral ports. The default is 100, but can be lowered
to a minimum of 26. Since streaming RPC connections create a new TCP
connection (until MultiplexV2 is used), 20 connections are reserved for
Raft and non-streaming RPCs to prevent connection exhaustion due to
streaming RPCs.
All limits are configurable and may be disabled by setting them to `0`.
This also includes a fix that closes connections that attempt to create
TLS RPC connections recursively. While only users with valid mTLS
certificates could perform such an operation, it was added as a
safeguard to prevent programming errors before they could cause resource
exhaustion.
Passes in agent enable_debug config to nomad server and client configs.
This allows for rpc endpoints to have more granular control if they
should be enabled or not in combination with ACLs.
enable debug on client test
Adds new package that can be used by client and server RPC endpoints to
facilitate monitoring based off of a logger
clean up old code
small comment about write
rm old comment about minsize
rename to Monitor
Removes connection logic from monitor command
Keep connection logic in endpoints, use a channel to send results from
monitoring
use new multisink logger and interfaces
small test for dropped messages
update go-hclogger and update sink/intercept logger interfaces
AgentMonitor is an endpoint to stream logs for a given agent. It allows
callers to pass in a supplied log level, which may be different than the
agents config allowing for temporary debugging with lower log levels.
Pass in logWriter when setting up Agent
When rendering a task template, the `plugin` function is no longer
permitted by default and will raise an error. An operator can opt-in
to permitting this function with the new `template.function_blacklist`
field in the client configuration.
When rendering a task template, path parameters for the `file`
function will be treated as relative to the task directory by
default. Relative paths or symlinks that point outside the task
directory will raise an error. An operator can opt-out of this
protection with the new `template.disable_file_sandbox` field in the
client configuration.
This exposes a client flag to disable nomad remote exec support in
environments where access to tasks ought to be restricted.
I used `disable_remote_exec` client flag that defaults to allowing
remote exec. Opted for a client config that can be used to disable
remote exec globally, or to a subset of the cluster if necessary.
* master: (912 commits)
Update redirects.txt
Added redirect for Spark guide link
client: log when server list changes
docs: mention regression in task config validation
fix update to changelog
update CHANGELOG with datacenter config validation https://github.com/hashicorp/nomad/pull/5665
typo: "atleast" -> "at least"
implement nomad exec for rkt
docs: fixed typo
use pty/tty terminology similar to github.com/kr/pty
vendor github.com/kr/pty
drivers: implement streaming exec for executor based drivers
executors: implement streaming exec
executor: scaffolding for executor grpc handling
client: expose allocated memory per task
client improve a comment in updateNetworks
stalebot: Add 'thinking' as an exempt label (#5684)
Added Sparrow link
update links to use new canonical location
Add redirects for restructing done in GH-5667
...
IOPS have been modelled as a resource since Nomad 0.1 but has never
actually been detected and there is no plan in the short term to add
detection. This is because IOPS is a bit simplistic of a unit to define
the performance requirements from the underlying storage system. In its
current state it adds unnecessary confusion and can be removed without
impacting any users. This PR leaves IOPS defined at the jobspec parsing
level and in the api/ resources since these are the two public uses of
the field. These should be considered deprecated and only exist to allow
users to stop using them during the Nomad 0.9.x release. In the future,
there should be no expectation that the field will exist.
Drew Bailey