The `namespace` field was not included in the equality check between old and new
Vault configurations, which meant that a Vault config change that only changed
the namespace would not be detected as a change and the clients would not be
reloaded.
Also, the comparison for boolean fields such as `enabled` and
`allow_unauthenticated` was on the pointer and not the value of that pointer,
which results in spurious reloads in real config reload that is easily missed in
typical test scenarios.
Includes a minor refactor of the order of fields for `Copy` and `Merge` to match
the struct fields in hopes it makes it harder to make this mistake in the
future, as well as additional test coverage.
Before this change, Client had 2 copies of the config object: config and configCopy. There was no guidance around which to use where (other than configCopy's comment to pass it to alloc runners), both are shared among goroutines and mutated in data racy ways. At least at one point I think the idea was to have `config` be mutable and then grab a lock to overwrite `configCopy`'s pointer atomically. This would have allowed alloc runners to read their config copies in data race safe ways, but this isn't how the current implementation worked.
This change takes the following approach to safely handling configs in the client:
1. `Client.config` is the only copy of the config and all access must go through the `Client.configLock` mutex
2. Since the mutex *only protects the config pointer itself and not fields inside the Config struct:* all config mutation must be done on a *copy* of the config, and then Client's config pointer is overwritten while the mutex is acquired. Alloc runners and other goroutines with the old config pointer will not see config updates.
3. Deep copying is implemented on the Config struct to satisfy the previous approach. The TLS Keyloader is an exception because it has its own internal locking to support mutating in place. An unfortunate complication but one I couldn't find a way to untangle in a timely fashion.
4. To facilitate deep copying I made an *internally backward incompatible API change:* our `helper/funcs` used to turn containers (slices and maps) with 0 elements into nils. This probably saves a few memory allocations but makes it very easy to cause panics. Since my new config handling approach uses more copying, it became very difficult to ensure all code that used containers on configs could handle nils properly. Since this code has caused panics in the past, I fixed it: nil containers are copied as nil, but 0-element containers properly return a new 0-element container. No more "downgrading to nil!"
This test is a fairly trivial test of the agent RPC, but the test setup waits
for a short fixed window after the node starts to send the RPC. After looking at
detailed logs for recent test failures, it looks like the node registration for
the first node doesn't get a chance to happen before we make the RPC call. Use
`WaitForResultUntil` to give the test more time to run in slower test
environments, while allowing it to finish quickly if possible.
Plan rejections occur when the scheduler work and the leader plan
applier disagree on the feasibility of a plan. This may happen for valid
reasons: since Nomad does parallel scheduling, it is expected that
different workers will have a different state when computing placements.
As the final plan reaches the leader plan applier, it may no longer be
valid due to a concurrent scheduling taking up intended resources. In
these situations the plan applier will notify the worker that the plan
was rejected and that they should refresh their state before trying
again.
In some rare and unexpected circumstances it has been observed that
workers will repeatedly submit the same plan, even if they are always
rejected.
While the root cause is still unknown this mitigation has been put in
place. The plan applier will now track the history of plan rejections
per client and include in the plan result a list of node IDs that should
be set as ineligible if the number of rejections in a given time window
crosses a certain threshold. The window size and threshold value can be
adjusted in the server configuration.
To avoid marking several nodes as ineligible at one, the operation is rate
limited to 5 nodes every 30min, with an initial burst of 10 operations.
* test: use `T.TempDir` to create temporary test directory
This commit replaces `ioutil.TempDir` with `t.TempDir` in tests. The
directory created by `t.TempDir` is automatically removed when the test
and all its subtests complete.
Prior to this commit, temporary directory created using `ioutil.TempDir`
needs to be removed manually by calling `os.RemoveAll`, which is omitted
in some tests. The error handling boilerplate e.g.
defer func() {
if err := os.RemoveAll(dir); err != nil {
t.Fatal(err)
}
}
is also tedious, but `t.TempDir` handles this for us nicely.
Reference: https://pkg.go.dev/testing#T.TempDir
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
* test: fix TestLogmon_Start_restart on Windows
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
* test: fix failing TestConsul_Integration
t.TempDir fails to perform the cleanup properly because the folder is
still in use
testing.go:967: TempDir RemoveAll cleanup: unlinkat /tmp/TestConsul_Integration2837567823/002/191a6f1a-5371-cf7c-da38-220fe85d10e5/web/secrets: device or resource busy
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
- Making RPC Upgrade mode reloadable.
- Add suggestions from code review
- remove spurious comment
- switch to require(t,...) form for test.
- Add to changelog
FailoverHeartbeatTTL is the amount of time to wait after a server leader failure
before considering reallocating client tasks. This TTL should be fairly long as
the new server leader needs to rebuild the entire heartbeat map for the
cluster. In deployments with a small number of machines, the default TTL (5m)
may be unnecessary long. Let's allow operators to configure this value in their
config files.
* remove event durability
temporarily removing go-memdb event durability until a new strategy is developed on how to best handled increased durability needs
* drop events table schema and state store methods
* fix neweventbuffer invocations
properly wire up durable event count
move newline responsibility
moves newline creation from NDJson to the http handler, json stream only encodes and sends now
ignore snapshot restore if broker is disabled
enable dev mode to access event steam without acl
use mapping instead of switch
use pointers for config sizes, remove unused ttl, simplify closed conn logic
This change updates tests to honor `BootstrapExpect` exclusively when
forming test clusters and removes test only knobs, e.g.
`config.DevDisableBootstrap`.
Background:
Test cluster creation is fragile. Test servers don't follow the
BootstapExpected route like production clusters. Instead they start as
single node clusters and then get rejoin and may risk causing brain
split or other test flakiness.
The test framework expose few knobs to control those (e.g.
`config.DevDisableBootstrap` and `config.Bootstrap`) that control
whether a server should bootstrap the cluster. These flags are
confusing and it's unclear when to use: their usage in multi-node
cluster isn't properly documented. Furthermore, they have some bad
side-effects as they don't control Raft library: If
`config.DevDisableBootstrap` is true, the test server may not
immediately attempt to bootstrap a cluster, but after an election
timeout (~50ms), Raft may force a leadership election and win it (with
only one vote) and cause a split brain.
The knobs are also confusing as Bootstrap is an overloaded term. In
BootstrapExpect, we refer to bootstrapping the cluster only after N
servers are connected. But in tests and the knobs above, it refers to
whether the server is a single node cluster and shouldn't wait for any
other server.
Changes:
This commit makes two changes:
First, it relies on `BootstrapExpected` instead of `Bootstrap` and/or
`DevMode` flags. This change is relatively trivial.
Introduce a `Bootstrapped` flag to track if the cluster is bootstrapped.
This allows us to keep `BootstrapExpected` immutable. Previously, the
flag was a config value but it gets set to 0 after cluster bootstrap
completes.
Introduce limits to prevent unauthorized users from exhausting all
ephemeral ports on agents:
* `{https,rpc}_handshake_timeout`
* `{http,rpc}_max_conns_per_client`
The handshake timeout closes connections that have not completed the TLS
handshake by the deadline (5s by default). For RPC connections this
timeout also separately applies to first byte being read so RPC
connections with TLS enabled have `rpc_handshake_time * 2` as their
deadline.
The connection limit per client prevents a single remote TCP peer from
exhausting all ephemeral ports. The default is 100, but can be lowered
to a minimum of 26. Since streaming RPC connections create a new TCP
connection (until MultiplexV2 is used), 20 connections are reserved for
Raft and non-streaming RPCs to prevent connection exhaustion due to
streaming RPCs.
All limits are configurable and may be disabled by setting them to `0`.
This also includes a fix that closes connections that attempt to create
TLS RPC connections recursively. While only users with valid mTLS
certificates could perform such an operation, it was added as a
safeguard to prevent programming errors before they could cause resource
exhaustion.
Consul Connect must route traffic between network namespaces through a
public interface (i.e. not localhost). In order to support testing in
dev mode, users needed to manually set the interface which doesn't
make for a smooth experience.
This commit adds a facility for adding optional parameters to the
`nomad agent -dev` flag and uses it to add a `-dev=connect` flag that
binds to a public interface on the host.
Instead of checking Consul's version on startup to see if it supports
TLSSkipVerify, assume that it does and only log in the job service
handler if we discover Consul does not support TLSSkipVerify.
The old code would break TLSSkipVerify support if Nomad started before
Consul (such as on system boot) as TLSSkipVerify would default to false
if Consul wasn't running. Since TLSSkipVerify has been supported since
Consul 0.7.2, it's safe to relax our handling.
* Allow server TLS configuration to be reloaded via SIGHUP
* dynamic tls reloading for nomad agents
* code cleanup and refactoring
* ensure keyloader is initialized, add comments
* allow downgrading from TLS
* initalize keyloader if necessary
* integration test for tls reload
* fix up test to assert success on reloaded TLS configuration
* failure in loading a new TLS config should remain at current
Reload only the config if agent is already using TLS
* reload agent configuration before specific server/client
lock keyloader before loading/caching a new certificate
* introduce a get-or-set method for keyloader
* fixups from code review
* fix up linting errors
* fixups from code review
* add lock for config updates; improve copy of tls config
* GetCertificate only reloads certificates dynamically for the server
* config updates/copies should be on agent
* improve http integration test
* simplify agent reloading storing a local copy of config
* reuse the same keyloader when reloading
* Test that server and client get reloaded but keep keyloader
* Keyloader exposes GetClientCertificate as well for outgoing connections
* Fix spelling
* correct changelog style
