* Adds meta to job list stub and displays a pack logo on the jobs index
* Changelog
* Modifying struct for optional meta param
* Explicitly ask for meta anytime I look up a job from index or job page
* Test case for the endpoint
* adding meta field to API struct and ommitting from response if empty
* passthru method added to api/jobs.list
* Meta param listed in docs for jobs list
* Update api/jobs.go
Co-authored-by: Tim Gross <tgross@hashicorp.com>
Co-authored-by: Tim Gross <tgross@hashicorp.com>
* scheduler: stopped-yet-running allocs are still running
* scheduler: test new stopped-but-running logic
* test: assert nonoverlapping alloc behavior
Also add a simpler Wait test helper to improve line numbers and save few
lines of code.
* docs: tried my best to describe #10446
it's not concise... feedback welcome
* scheduler: fix test that allowed overlapping allocs
* devices: only free devices when ClientStatus is terminal
* test: output nicer failure message if err==nil
Co-authored-by: Mahmood Ali <mahmood@hashicorp.com>
Co-authored-by: Michael Schurter <mschurter@hashicorp.com>
After a more detailed analysis of this feature, the approach taken in
PR #12449 was found to be not ideal due to poor UX (users are
responsible for setting the entity alias they would like to use) and
issues around jobs potentially masquerading itself as another Vault
entity.
Move some common Vault API data struct decoding out of the Vault client
so it can be reused in other situations.
Make Vault job validation its own function so it's easier to expand it.
Rename the `Job.VaultPolicies` method to just `Job.Vault` since it
returns the full Vault block, not just their policies.
Set `ChangeMode` on `Vault.Canonicalize`.
Add some missing tests.
Allows specifying an entity alias that will be used by Nomad when
deriving the task Vault token.
An entity alias assigns an indentity to a token, allowing better control
and management of Vault clients since all tokens with the same indentity
alias will now be considered the same client. This helps track Nomad
activity in Vault's audit logs and better control over Vault billing.
Add support for a new Nomad server configuration to define a default
entity alias to be used when deriving Vault tokens. This default value
will be used if the task doesn't have an entity alias defined.
A volume that has single-use access mode is feasibility checked during
scheduling to ensure that only a single reader or writer claim
exists. However, because feasibility checking is done one alloc at a
time before the plan is written, a job that's misconfigured to have
count > 1 that mounts one of these volumes will pass feasibility
checking.
Enforce the check at validation time instead to prevent us from even
trying to evaluation a job that's misconfigured this way.
Some operators use very long group/task `shutdown_delay` settings to
safely drain network connections to their workloads after service
deregistration. But during incident response, they may want to cause
that drain to be skipped so they can quickly shed load.
Provide a `-no-shutdown-delay` flag on the `nomad alloc stop` and
`nomad job stop` commands that bypasses the delay. This sets a new
desired transition state on the affected allocations that the
allocation/task runner will identify during pre-kill on the client.
Note (as documented here) that using this flag will almost always
result in failed inbound network connections for workloads as the
tasks will exit before clients receive updated service discovery
information and won't be gracefully drained.
During incident response, operators may find that automated processes
elsewhere in the organization can be generating new workloads on Nomad
clusters that are unable to handle the workload. This changeset adds a
field to the `SchedulerConfiguration` API that causes all job
registration calls to be rejected unless the request has a management
ACL token.
This change modifies the Nomad job register and deregister RPCs to
accept an updated option set which includes eval priority. This
param is optional and override the use of the job priority to set
the eval priority.
In order to ensure all evaluations as a result of the request use
the same eval priority, the priority is shared to the
allocReconciler and deploymentWatcher. This creates a new
distinction between eval priority and job priority.
The Nomad agent HTTP API has been modified to allow setting the
eval priority on job update and delete. To keep consistency with
the current v1 API, job update accepts this as a payload param;
job delete accepts this as a query param.
Any user supplied value is validated within the agent HTTP handler
removing the need to pass invalid requests to the server.
The register and deregister opts functions now all for setting
the eval priority on requests.
The change includes a small change to the DeregisterOpts function
which handles nil opts. This brings the function inline with the
RegisterOpts.
Previously when creating an eval for job deregistration, the eval
priority was set to the default value irregardless of the job
priority. In situations where an operator would want to deregister
a high priority job so they could re-register; the evaluation may
get blocked for some time on a busy cluster because of the
deregsiter priority.
If a job had a lower than default priority and was deregistered,
the deregister eval would get a priority higher than that of the
job. If we attempted to register another job with a higher
priority than this, but still below the default, the deregister
would be actioned before the register.
Both situations described above seem incorrect and unexpected from
a user prespective.
This fix modifies to behaviour to set the deregister eval priority
to that of the job, if available. Otherwise the default value is
still used.
This PR fixes the Nomad Object Namespace <-> Consul ACL Token relationship
check when using Consul OSS (or Consul ENT without namespace support).
Nomad v1.1.0 introduced a regression where Nomad would fail the validation
when submitting Connect jobs and allow_unauthenticated set to true, with
Consul OSS - because it would do the namespace check against the Consul ACL
token assuming the "default" namespace, which does not work because Consul OSS
does not have namespaces.
Instead of making the bad assumption, expand the namespace check to handle
each special case explicitly.
Fixes#10718
Cluster operators want to have better control over memory
oversubscription and may want to enable/disable it based on their
experience.
This PR adds a scheduler configuration field to control memory
oversubscription. It's additional field that can be set in the [API via Scheduler Config](https://www.nomadproject.io/api-docs/operator/scheduler), or [the agent server config](https://www.nomadproject.io/docs/configuration/server#configuring-scheduler-config).
I opted to have the memory oversubscription be an opt-in, but happy to change it. To enable it, operators should call the API with:
```json
{
"MemoryOversubscriptionEnabled": true
}
```
If memory oversubscription is disabled, submitting jobs specifying `memory_max` will get a "Memory oversubscription is not
enabled" warnings, but the jobs will be accepted without them accessing
the additional memory.
The warning message is like:
```
$ nomad job run /tmp/j
Job Warnings:
1 warning(s):
* Memory oversubscription is not enabled; Task cache.redis memory_max value will be ignored
==> Monitoring evaluation "7c444157"
Evaluation triggered by job "example"
==> Monitoring evaluation "7c444157"
Evaluation within deployment: "9d826f13"
Allocation "aa5c3cad" created: node "9272088e", group "cache"
Evaluation status changed: "pending" -> "complete"
==> Evaluation "7c444157" finished with status "complete"
# then you can examine the Alloc AllocatedResources to validate whether the task is allowed to exceed memory:
$ nomad alloc status -json aa5c3cad | jq '.AllocatedResources.Tasks["redis"].Memory'
{
"MemoryMB": 256,
"MemoryMaxMB": 0
}
```
Add Namespace as a top-level field in `/v1/jobs` stub.
The `/v1/jobs` endpoint already includes the namespace under `JobSummary`, though the API is odd, as typically the job ID and Namespace are in the same level, and the oddity complicates the UI frontend development.
The downside of adding it is redundant field, that makes the response body a bit bigger, specially for clusters with large jobs. Though, it should compress nicely and I expect the overhead to be small to overall response size. The benefit of a cleaner and more consistent API seem worth it.
Fixes#10431
This PR adds the common OSS changes for adding support for Consul Namespaces,
which is going to be a Nomad Enterprise feature. There is no new functionality
provided by this changeset and hopefully no new bugs.
The expose handler hook must handle if the submitted job is invalid. Without this validation, the rpc handler panics on invalid input.
Co-authored-by: Tim Gross <tgross@hashicorp.com>
This PR enables job submitters to use interpolation in the connect
block of jobs making use of consul connect. Before, only the name of
the connect service would be interpolated, and only for a few select
identifiers related to the job itself (#6853). Now, all connect fields
can be interpolated using the full spectrum of runtime parameters.
Note that the service name is interpolated at job-submission time,
and cannot make use of values known only at runtime.
Fixes#7221
* upsertaclpolicies
* delete acl policies msgtype
* upsert acl policies msgtype
* delete acl tokens msgtype
* acl bootstrap msgtype
wip unsubscribe on token delete
test that subscriptions are closed after an ACL token has been deleted
Start writing policyupdated test
* update test to use before/after policy
* add SubscribeWithACLCheck to run acl checks on subscribe
* update rpc endpoint to use broker acl check
* Add and use subscriptions.closeSubscriptionFunc
This fixes the issue of not being able to defer unlocking the mutex on
the event broker in the for loop.
handle acl policy updates
* rpc endpoint test for terminating acl change
* add comments
Co-authored-by: Kris Hicks <khicks@hashicorp.com>
* use msgtype in upsert node
adds message type to signature for upsert node, update tests, remove placeholder method
* UpsertAllocs msg type test setup
* use upsertallocs with msg type in signature
update test usage of delete node
delete placeholder msgtype method
* add msgtype to upsert evals signature, update test call sites with test setup msg type
handle snapshot upsert eval outside of FSM and ignore eval event
remove placeholder upsertevalsmsgtype
handle job plan rpc and prevent event creation for plan
msgtype cleanup upsertnodeevents
updatenodedrain msgtype
msg type 0 is a node registration event, so set the default to the ignore type
* fix named import
* fix signature ordering on upsertnode to match
When defining a script-check in a group-level service, Nomad needs to
know which task is associated with the check so that it can use the
correct task driver to execute the check.
This PR fixes two bugs:
1) validate service.task or service.check.task is configured
2) make service.check.task inherit service.task if it is itself unset
Fixes#8952
This PR adds initial support for running Consul Connect Ingress Gateways (CIGs) in Nomad. These gateways are declared as part of a task group level service definition within the connect stanza.
```hcl
service {
connect {
gateway {
proxy {
// envoy proxy configuration
}
ingress {
// ingress-gateway configuration entry
}
}
}
}
```
A gateway can be run in `bridge` or `host` networking mode, with the caveat that host networking necessitates manually specifying the Envoy admin listener (which cannot be disabled) via the service port value.
Currently Envoy is the only supported gateway implementation in Consul, and Nomad only supports running Envoy as a gateway using the docker driver.
Aims to address #8294 and tangentially #8647
Fixes https://github.com/hashicorp/nomad/issues/8544
This PR fixes a bug where using `nomad job plan ...` always report no change if the submitted job contain scaling.
The issue has three contributing factors:
1. The plan endpoint doesn't populate the required scaling policy ID; unlike the job register endpoint
2. The plan endpoint suppresses errors on job insertion - the job insertion fails here, because the scaling policy is missing the required ID
3. The scheduler reports no update necessary when the relevant job isn't in store (because the insertion failed)
This PR fixes the first two factors. Changing the scheduler to be more strict might make sense, but may violate some idempotency invariant or make the scheduler more brittle.
Phil Renaud