Some drivers will automatically create directories when trying to mount
a path into a container, but some will not.
To unify this behaviour, this commit requires that host volumes already exist,
and can be stat'd by the Nomad Agent during client startup.
The ClientState being pending isn't a good criteria; as an alloc may
have been updated in-place before it was completed.
Also, updated the logic so we only check for task states. If an alloc
has deployment state but no persisted tasks at all, restore will still
fail.
This uses an alternative approach where we avoid restoring the alloc
runner in the first place, if we suspect that the alloc may have been
completed already.
This fixes a bug where allocs that have been GCed get re-run again after client
is restarted. A heavily-used client may launch thousands of allocs on startup
and get killed.
The bug is that an alloc runner that gets destroyed due to GC remains in
client alloc runner set. Periodically, they get persisted until alloc is
gced by server. During that time, the client db will contain the alloc
but not its individual tasks status nor completed state. On client restart,
client assumes that alloc is pending state and re-runs it.
Here, we fix it by ensuring that destroyed alloc runners don't persist any alloc
to the state DB.
This is a short-term fix, as we should consider revamping client state
management. Storing alloc and task information in non-transaction non-atomic
concurrently while alloc runner is running and potentially changing state is a
recipe for bugs.
Fixes https://github.com/hashicorp/nomad/issues/5984
Related to https://github.com/hashicorp/nomad/pull/5890
* nomad: add admission controller framework
* nomad: add admission controller framework and Consul Connect hooks
* run admission controllers before checking permissions
* client: add default node meta for connect configurables
* nomad: remove validateJob func since it has been moved to admission controller
* nomad: use new TaskKind type
* client: use consts for connect sidecar image and log level
* Apply suggestions from code review
Co-Authored-By: Michael Schurter <mschurter@hashicorp.com>
* nomad: add job register test with connect sidecar
* Update nomad/job_endpoint_hooks.go
Co-Authored-By: Michael Schurter <mschurter@hashicorp.com>
When fetching node alloc assignments, be defensive against a stale read before
killing local nodes allocs.
The bug is when both client and servers are restarting and the client requests
the node allocation for the node, it might get stale data as server hasn't
finished applying all the restored raft transaction to store.
Consequently, client would kill and destroy the alloc locally, just to fetch it
again moments later when server store is up to date.
The bug can be reproduced quite reliably with single node setup (configured with
persistence). I suspect it's too edge-casey to occur in production cluster with
multiple servers, but we may need to examine leader failover scenarios more closely.
In this commit, we only remove and destroy allocs if the removal index is more
recent than the alloc index. This seems like a cheap resiliency fix we already
use for detecting alloc updates.
A more proper fix would be to ensure that a nomad server only serves
RPC calls when state store is fully restored or up to date in leadership
transition cases.
This fixes an issue where batch and service workloads would never be
restarted due to indefinitely blocking on a nil channel.
It also raises the restoration logging message to `Info` to simplify log
analysis.
Registration and restoring allocs don't share state or depend on each
other in any way (syncing allocs with servers is done outside of
registration).
Since restoring is synchronous, start the registration goroutine first.
For nodes with lots of allocs to restore or close to their heartbeat
deadline, this could be the difference between becoming "lost" or not.
Refactoring of 104067bc2b2002a4e45ae7b667a476b89addc162
Switch the MarkLive method for a chan that is closed by the client.
Thanks to @notnoop for the idea!
The old approach called a method on most existing ARs and TRs on every
runAllocs call. The new approach does a once.Do call in runAllocs to
accomplish the same thing with less work. Able to remove the gate
abstraction that did much more than was needed.
Fixes#1795
Running restored allocations and pulling what allocations to run from
the server happen concurrently. This means that if a client is rebooted,
and has its allocations rescheduled, it may restart the dead allocations
before it contacts the server and determines they should be dead.
This commit makes tasks that fail to reattach on restore wait until the
server is contacted before restarting.
* client: was not using up-to-date client state in determining which alloc count towards allocated resources
* Update client/client.go
Co-Authored-By: cgbaker <cgbaker@hashicorp.com>
This removes an unnecessary shared lock between discovery and heartbeating
which was causing heartbeats to be missed upon retries when a single server
fails. Also made a drive by fix to call the periodic server shuffler goroutine.
This command will be used to send a signal to either a single task within an
allocation, or all of the tasks if <task-name> is omitted. If the sent signal
terminates the allocation, it will be treated as if the allocation has crashed,
rather than as if it was operator-terminated.
Signal validation is currently handled by the driver itself and nomad
does not attempt to restrict or validate them.
I noticed that `watchNodeUpdates()` almost immediately after
`registerAndHeartbeat()` calls `retryRegisterNode()`, well after 5
seconds.
This call is unnecessary and made debugging a bit harder. So here, we
ensure that we only re-register node for new node events, not for
initial registration.
Here we retain 0.8.7 behavior of waiting for driver fingerprints before
registering a node, with some timeout. This is needed for system jobs,
as system job scheduling for node occur at node registration, and the
race might mean that a system job may not get placed on the node because
of missing drivers.
The timeout isn't strictly necessary, but raising it to 1 minute as it's
closer to indefinitely blocked than 1 second. We need to keep the value
high enough to capture as much drivers/devices, but low enough that
doesn't risk blocking too long due to misbehaving plugin.
Fixes https://github.com/hashicorp/nomad/issues/5579
Revert "fingerprint Constraints and Affinities have Equals, as set"
This reverts commit 596f16fb5f1a4a6766a57b3311af806d22382609.
Revert "client tests assert the independent handling of interface and speed"
This reverts commit 7857ac5993a578474d0570819f99b7b6e027de40.
Revert "structs missed applying a style change from the review"
This reverts commit 658916e3274efa438beadc2535f47109d0c2f0f2.
Revert "client, structs comments"
This reverts commit be2838d6baa9d382a5013fa80ea016856f28ade2.
Revert "client fingerprint updateNetworks preserves the network configuration"
This reverts commit fc309cb430e62d8e66267a724f006ae9abe1c63c.
Revert "client_test cleanup comments from review"
This reverts commit bc0bf4efb9114e699bc662f50c8f12319b6b3445.
Revert "client Networks Equals is set equality"
This reverts commit f8d432345b54b1953a4a4c719b9269f845e3e573.
Revert "struct cleanup indentation in RequestedDevice Equals"
This reverts commit f4746411cab328215def6508955b160a53452da3.
Revert "struct Equals checks for identity before value checking"
This reverts commit 0767a4665ed30ab8d9586a59a74db75d51fd9226.
Revert "fix client-test, avoid hardwired platform dependecy on lo0"
This reverts commit e89dbb2ab182b6368507dbcd33c3342223eb0ae7.
Revert "refactor error in client fingerprint to include the offending data"
This reverts commit a7fed726c6e0264d42a58410d840adde780a30f5.
Revert "add client updateNodeResources to merge but preserve manual config"
This reverts commit 84bd433c7e1d030193e054ec23474380ff3b9032.
Revert "refactor struts.RequestedDevice to have its own Equals"
This reverts commit 689782524090e51183474516715aa2f34908b8e6.
Revert "refactor structs.Resource.Networks to have its own Equals"
This reverts commit 49e2e6c77bb3eaa4577772b36c62205061c92fa1.
Revert "refactor structs.Resource.Devices to have its own Equals"
This reverts commit 4ede9226bb971ae42cc203560ed0029897aec2c9.
Revert "add COMPAT(0.10): Remove in 0.10 notes to impl for structs.Resources"
This reverts commit 49fbaace5298d5ccf031eb7ebec93906e1d468b5.
Revert "add structs.Resources Equals"
This reverts commit 8528a2a2a6450e4462a1d02741571b5efcb45f0b.
Revert "test that fingerprint resources are updated, net not clobbered"
This reverts commit 8ee02ddd23bafc87b9fce52b60c6026335bb722d.
This adds a `nomad alloc restart` command and api that allows a job operator
with the alloc-lifecycle acl to perform an in-place restart of a Nomad
allocation, or a given subtask.
