node drain: use msgtype on txn so that events are emitted
wip: encoding extension to add Node.Drain field back to API responses
new approach for hiding Node.SecretID in the API, using `json` tag
documented this approach in the contributing guide
refactored the JSON handlers with extensions
modified event stream encoding to use the go-msgpack encoders with the extensions
This PR implements Nomad built-in support for running Consul Connect
terminating gateways. Such a gateway can be used by services running
inside the service mesh to access "legacy" services running outside
the service mesh while still making use of Consul's service identity
based networking and ACL policies.
https://www.consul.io/docs/connect/gateways/terminating-gateway
These gateways are declared as part of a task group level service
definition within the connect stanza.
service {
connect {
gateway {
proxy {
// envoy proxy configuration
}
terminating {
// terminating-gateway configuration entry
}
}
}
}
Currently Envoy is the only supported gateway implementation in
Consul. The gateay task can be customized by configuring the
connect.sidecar_task block.
When the gateway.terminating field is set, Nomad will write/update
the Configuration Entry into Consul on job submission. Because CEs
are global in scope and there may be more than one Nomad cluster
communicating with Consul, there is an assumption that any terminating
gateway defined in Nomad for a particular service will be the same
among Nomad clusters.
Gateways require Consul 1.8.0+, checked by a node constraint.
Closes#9445
* use msgtype in upsert node
adds message type to signature for upsert node, update tests, remove placeholder method
* UpsertAllocs msg type test setup
* use upsertallocs with msg type in signature
update test usage of delete node
delete placeholder msgtype method
* add msgtype to upsert evals signature, update test call sites with test setup msg type
handle snapshot upsert eval outside of FSM and ignore eval event
remove placeholder upsertevalsmsgtype
handle job plan rpc and prevent event creation for plan
msgtype cleanup upsertnodeevents
updatenodedrain msgtype
msg type 0 is a node registration event, so set the default to the ignore type
* fix named import
* fix signature ordering on upsertnode to match
properly wire up durable event count
move newline responsibility
moves newline creation from NDJson to the http handler, json stream only encodes and sends now
ignore snapshot restore if broker is disabled
enable dev mode to access event steam without acl
use mapping instead of switch
use pointers for config sizes, remove unused ttl, simplify closed conn logic
Fixes#9017
The ?resources=true query parameter includes resources in the object
stub listings. Specifically:
- For `/v1/nodes?resources=true` both the `NodeResources` and
`ReservedResources` field are included.
- For `/v1/allocations?resources=true` the `AllocatedResources` field is
included.
The ?task_states=false query parameter removes TaskStates from
/v1/allocations responses. (By default TaskStates are included.)
Add a Postrun hook to send the `CSIVolume.Unpublish` RPC to the server. This
may forward client RPCs to the node plugins or to the controller plugins,
depending on whether other allocations on this node have claims on this
volume.
By making clients responsible for running the `CSIVolume.Unpublish` RPC (and
making the RPC available to a `nomad volume detach` command), the
volumewatcher becomes only used by the core GC job and we no longer need
async volume GC from job deregister and node update.
Following the new volumewatcher in #7794 and performance improvements
to it that landed afterwards, there's no particular reason we should
be threading claim releases through the GC eval rather than writing an
empty `CSIVolumeClaimRequest` with the mode set to
`CSIVolumeClaimRelease`, just as the GC evaluation would do.
Also, by batching up these raft messages, we can reduce the amount of
raft writes by 1 and cross-server RPCs by 1 per volume we release
claims on.
Fixes#8000
When requesting a Service Identity token from Consul, use the TaskKind
of the Task to get at the service name associated with the task. In
the past using the TaskName worked because it was generated as a sidecar
task with a name that included the service. In the Native context, we
need to get at the service name in a more correct way, i.e. using the
TaskKind which is defined to include the service name.
TestClientEndpoint_CreateNodeEvals flakes a bit but its output is very
confusing, as `structs.Evaluations` overrides GoString.
Here, we emit the entire struct of the evaluation, and hopefully we'll
figure out the problem the next time it happens
This changeset adds a subsystem to run on the leader, similar to the
deployment watcher or node drainer. The `Watcher` performs a blocking
query on updates to the `CSIVolumes` table and triggers reaping of
volume claims.
This will avoid tying up scheduling workers by immediately sending
volume claim workloads into their own loop, rather than blocking the
scheduling workers in the core GC job doing things like talking to CSI
controllers
The volume watcher is enabled on leader step-up and disabled on leader
step-down.
The volume claim GC mechanism now makes an empty claim RPC for the
volume to trigger an index bump. That in turn unblocks the blocking
query in the volume watcher so it can assess which claims can be
released for a volume.
Adds a `CSIVolumeClaim` type to be tracked as current and past claims
on a volume. Allows for a client RPC failure during node or controller
detachment without having to keep the allocation around after the
first garbage collection eval.
This changeset lays groundwork for moving the actual detachment RPCs
into a volume watching loop outside the GC eval.
The `Job.Deregister` call will block on the client CSI controller RPCs
while the alloc still exists on the Nomad client node. So we need to
make the volume claim reaping async from the `Job.Deregister`. This
allows `nomad job stop` to return immediately. In order to make this
work, this changeset changes the volume GC so that the GC jobs are on a
by-volume basis rather than a by-job basis; we won't have to query
the (possibly deleted) job at the time of volume GC. We smuggle the
volume ID and whether it's a purge into the GC eval ID the same way we
smuggled the job ID previously.
* nomad/state/state_store: enforce that the volume namespace exists
* nomad/csi_endpoint_test: a couple of broken namespaces now
* nomad/csi_endpoint_test: one more test
* nomad/node_endpoint_test: use structs.DefaultNamespace
* nomad/state/state_store_test: use DefaultNamespace
* nomad/state/schema: use the namespace compound index
* scheduler/scheduler: CSIVolumeByID interface signature namespace
* scheduler/stack: SetJob on CSIVolumeChecker to capture namespace
* scheduler/feasible: pass the captured namespace to CSIVolumeByID
* nomad/state/state_store: use namespace in csi_volume index
* nomad/fsm: pass namespace to CSIVolumeDeregister & Claim
* nomad/core_sched: pass the namespace in volumeClaimReap
* nomad/node_endpoint_test: namespaces in Claim testing
* nomad/csi_endpoint: pass RequestNamespace to state.*
* nomad/csi_endpoint_test: appropriately failed test
* command/alloc_status_test: appropriately failed test
* node_endpoint_test: avoid notTheNamespace for the job
* scheduler/feasible_test: call SetJob to capture the namespace
* nomad/csi_endpoint: ACL check the req namespace, query by namespace
* nomad/state/state_store: remove deregister namespace check
* nomad/state/state_store: remove unused CSIVolumes
* scheduler/feasible: CSIVolumeChecker SetJob -> SetNamespace
* nomad/csi_endpoint: ACL check
* nomad/state/state_store_test: remove call to state.CSIVolumes
* nomad/core_sched_test: job namespace match so claim gc works
When an alloc is marked terminal (and after node unstage/unpublish
have been called), the client syncs the terminal alloc state with the
server via `Node.UpdateAlloc RPC`.
For each job that has a terminal alloc, the `Node.UpdateAlloc` RPC
handler at the server will emit an eval for a new core job to garbage
collect CSI volume claims. When this eval is handled on the core
scheduler, it will call a `volumeReap` method to release the claims
for all terminal allocs on the job.
The volume reap will issue a `ControllerUnpublishVolume` RPC for any
node that has no alloc claiming the volume. Once this returns (or
is skipped), the volume reap will send a new `CSIVolume.Claim` RPC
that releases the volume claim for that allocation in the state store,
making it available for scheduling again.
This same `volumeReap` method will be called from the core job GC,
which gives us a second chance to reclaim volumes during GC if there
were controller RPC failures.
When an alloc is marked terminal, and after node unstage/unpublish
have been called, the client will sync the terminal alloc state with
the server via `Node.UpdateAlloc` RPC.
This changeset implements releasing the volume claim for each volume
associated with the terminal alloc. It doesn't yet implement the RPC
call we need to make to the `ControllerUnpublishVolume` CSI RPC.
* state_store: csi volumes/plugins store the index in the txn
* nomad: csi_endpoint_test require index checks need uint64()
* nomad: other tests using int 0 not uint64(0)
* structs: pass index into New, but not other struct methods
* state_store: csi plugin indexes, use new struct interface
* nomad: csi_endpoint_test check index/query meta (on explicit 0)
* structs: NewCSIVolume takes an index arg now
* scheduler/test: NewCSIVolume takes an index arg now
This change updates tests to honor `BootstrapExpect` exclusively when
forming test clusters and removes test only knobs, e.g.
`config.DevDisableBootstrap`.
Background:
Test cluster creation is fragile. Test servers don't follow the
BootstapExpected route like production clusters. Instead they start as
single node clusters and then get rejoin and may risk causing brain
split or other test flakiness.
The test framework expose few knobs to control those (e.g.
`config.DevDisableBootstrap` and `config.Bootstrap`) that control
whether a server should bootstrap the cluster. These flags are
confusing and it's unclear when to use: their usage in multi-node
cluster isn't properly documented. Furthermore, they have some bad
side-effects as they don't control Raft library: If
`config.DevDisableBootstrap` is true, the test server may not
immediately attempt to bootstrap a cluster, but after an election
timeout (~50ms), Raft may force a leadership election and win it (with
only one vote) and cause a split brain.
The knobs are also confusing as Bootstrap is an overloaded term. In
BootstrapExpect, we refer to bootstrapping the cluster only after N
servers are connected. But in tests and the knobs above, it refers to
whether the server is a single node cluster and shouldn't wait for any
other server.
Changes:
This commit makes two changes:
First, it relies on `BootstrapExpected` instead of `Bootstrap` and/or
`DevMode` flags. This change is relatively trivial.
Introduce a `Bootstrapped` flag to track if the cluster is bootstrapped.
This allows us to keep `BootstrapExpected` immutable. Previously, the
flag was a config value but it gets set to 0 after cluster bootstrap
completes.
Nomad jobs may be configured with a TaskGroup which contains a Service
definition that is Consul Connect enabled. These service definitions end
up establishing a Consul Connect Proxy Task (e.g. envoy, by default). In
the case where Consul ACLs are enabled, a Service Identity token is required
for these tasks to run & connect, etc. This changeset enables the Nomad Server
to recieve RPC requests for the derivation of SI tokens on behalf of instances
of Consul Connect using Tasks. Those tokens are then relayed back to the
requesting Client, which then injects the tokens in the secrets directory of
the Task.
Copy the updated version of freeport (sdk/freeport), and tweak it for use
in Nomad tests. This means staying below port 10000 to avoid conflicts with
the lib/freeport that is still transitively used by the old version of
consul that we vendor. Also provide implementations to find ephemeral ports
of macOS and Windows environments.
Ports acquired through freeport are supposed to be returned to freeport,
which this change now also introduces. Many tests are modified to include
calls to a cleanup function for Server objects.
This should help quite a bit with some flakey tests, but not all of them.
Our port problems will not go away completely until we upgrade our vendor
version of consul. With Go modules, we'll probably do a 'replace' to swap
out other copies of freeport with the one now in 'nomad/helper/freeport'.
