This PR fixes a long standing bug where submitting jobs with changes
to connect services would not trigger updates as expected. Previously,
service blocks were not considered as sources of destructive updates
since they could be synced with consul non-destructively. With Connect,
task group services that have changes to their connect block or to
the service port should be destructive, since the network plumbing of
the alloc is going to need updating.
Fixes#8596#7991
Non-destructive half in #7192
Since CPU resources are usually a soft limit it is desirable to allow
setting it as low as possible to allow tasks to run only in "idle" time.
Setting it to 0 is still not allowed to avoid potential unintentional
side effects with allowing a zero value. While there may not be any side
effects this commit attempts to minimize risk by avoiding the issue.
This does *not* change the defaults.
When defining a script-check in a group-level service, Nomad needs to
know which task is associated with the check so that it can use the
correct task driver to execute the check.
This PR fixes two bugs:
1) validate service.task or service.check.task is configured
2) make service.check.task inherit service.task if it is itself unset
Fixes#8952
Noticed this error in some production logs, and they were far from
helpful. Changes:
1. Include job ID in logs
2. Wrap errors and log once instead of double log lines
3. Test fsm error handling behavior
The current implementation measures RPC request timeout only against
config.RPCHoldTimeout, which is fine for non-blocking requests but will
almost surely be exceeded by long-poll requests that block for minutes
at a time.
This adds an HasTimedOut method on the RPCInfo interface that takes into
account whether the request is blocking, its maximum wait time, and the
RPCHoldTimeout.
In #7800, Nomad would automatically generate a port label for service
checks making use of the expose feature, if the port was not already
set. This change assumed the group network would be correctly defined
(as is checked in a validation hook later). If the group network was
not definied, a panic would occur on job submisssion. This change
re-uses the group network validation helper to make sure the network
is correctly definied before adding ports to it.
Fixes#8875
This commit wraps memdb.DB with a changeTrackerDB, which is a thin
wrapper around memdb.DB which enables go-memdb's TrackChanges on all write
transactions. When the transaction is comitted the changes are sent to
an eventPublisher which will be used to create and emit change events.
debugging TestFSM_ReconcileSummaries
wip
revert back rebase
revert back rebase
fix snapshot to actually use a snapshot
Fix CSIMountOptions.Copy() and VolumeRequest.Copy() where they
accidentally returned a reference to self rather than a deep copy.
`&(*ref)` in Golang apparently equivalent to plain `&ref`.
The initial implementation of global job stop for MRD looped over all the
regions in the CLI for expedience. This changeset includes the OSS parts of
moving this into the RPC layer so that API consumers don't have to implement
this logic themselves.
Multiregion deployments use the `NomadTokenID` to allow the deploymentwatcher
to send RPCs between regions with the original submitter's ACL token. This ID
should be filtered from diffs so that it doesn't cause a difference for
purposes of job plans.
When consul.allow_unauthenticated is set to false, the job_endpoint hook validates
that a `-consul-token` is provided and validates the token against the privileges
inherent to a Consul Service Identity policy for all the Connect enabled services
defined in the job.
Before, the check was assuming the service was of type sidecar-proxy. This fixes the
check to use the type of the task so we can distinguish between the different connect
types.
This PR adds initial support for running Consul Connect Ingress Gateways (CIGs) in Nomad. These gateways are declared as part of a task group level service definition within the connect stanza.
```hcl
service {
connect {
gateway {
proxy {
// envoy proxy configuration
}
ingress {
// ingress-gateway configuration entry
}
}
}
}
```
A gateway can be run in `bridge` or `host` networking mode, with the caveat that host networking necessitates manually specifying the Envoy admin listener (which cannot be disabled) via the service port value.
Currently Envoy is the only supported gateway implementation in Consul, and Nomad only supports running Envoy as a gateway using the docker driver.
Aims to address #8294 and tangentially #8647
This change fixes a bug where lost/failed allocations are replaced by
allocations with the latest versions, even if the version hasn't been
promoted yet.
Now, when generating a plan for lost/failed allocations, the scheduler
first checks if the current deployment is in Canary stage, and if so, it
ensures that any lost/failed allocations is replaced one with the latest
promoted version instead.
If a core job fails more than the delivery limit, the leader will create a new
eval with the TriggeredBy field set to `failed-follow-up`.
Evaluations for core jobs have the leader's ACL, which is not valid on another
leader after an election. The `failed-follow-up` evals do not have ACLs, so
core job evals that fail more than the delivery limit or core job evals that
span leader elections will never succeed and will be re-enqueued forever. So
we should not retry with a `failed-follow-up`.
The soundness guarantees of the CSI specification leave a little to be desired
in our ability to provide a 100% reliable automated solution for managing
volumes. This changeset provides a new command to bridge this gap by providing
the operator the ability to intervene.
The command doesn't take an allocation ID so that the operator doesn't have to
keep track of alloc IDs that may have been GC'd. Handle this case in the
unpublish RPC by sending the client RPC for all the terminal/nil allocs on the
selected node.
The CSI client RPC uses error wrapping to detect the type of error bubbling up
from plugins, but if the errors we get aren't wrapped at each layer, we can't
unwrap the inner error.
Also eliminates some unused args.
This change adds the ability to set the fields `success_before_passing` and
`failures_before_critical` on Consul service check definitions. This is a
feature added to Consul v1.7.0 and later.
https://www.consul.io/docs/agent/checks#success-failures-before-passing-critical
Nomad doesn't do much besides pass the fields through to Consul.
Fixes#6913
When deregistering a client, CSI plugins running on that client may not get a
chance to fingerprint before being stopped. Account for the case where a
plugin allocation is the last instance of the plugin and has been deleted from
the state store to avoid errors during node deregistration.
When the client-side actions of a CSI client RPC succeed but we get
disconnected during the RPC or we fail to checkpoint the claim state, we want
to be able to retry the client RPC without getting blocked by the client-side
state (ex. mount points) already having been cleaned up in previous calls.
Using the count of node claims from earlier in the `CSIVolume.Unpublish RPC
doesn't correctly account for cases where the RPC was interrupted but
checkpointed. Instead, we'll check the current allocation count and status to
determine whether we need to send a controller unpublish.
Add a Postrun hook to send the `CSIVolume.Unpublish` RPC to the server. This
may forward client RPCs to the node plugins or to the controller plugins,
depending on whether other allocations on this node have claims on this
volume.
By making clients responsible for running the `CSIVolume.Unpublish` RPC (and
making the RPC available to a `nomad volume detach` command), the
volumewatcher becomes only used by the core GC job and we no longer need
async volume GC from job deregister and node update.
This changeset updates `nomad/volumewatcher` to take advantage of the
`CSIVolume.Unpublish` RPC. This lets us eliminate a bunch of code and
associated tests. The raft batching code can be safely dropped, as the
characteristic times of the CSI RPCs are on the order of seconds or even
minutes, so batching up raft RPCs added complexity without any real world
performance wins.
Includes refactor w/ test cleanup and dead code elimination in volumewatcher
The documentation encourages operators to run multiple controller plugin
instances for HA, but the client RPCs don't take advantage of this by retrying
when the RPC fails in cases when the plugin is unavailable (because the node
has drained or the alloc has failed but we haven't received an updated
fingerprint yet).
This changeset tries all known controllers on ready nodes before giving up,
and adds tests that exercise the client RPC routing and retries.
This log line should be rare since:
1. Most tokens should be logged synchronously, not via this async
batched method. Async revocation only takes place when Vault
connectivity is lost and after leader election so no revocations are
missed.
2. There should rarely be >1 batch (1,000) tokens to revoke since the
above conditions should be brief and infrequent.
3. Interval is 5 minutes, so this log line will be emitted at *most*
once every 5 minutes.
What makes this log line rare is also what makes it interesting: due to
a bug prior to Nomad 0.11.2 some tokens may never get revoked. Therefore
Nomad tries to re-revoke them on every leader election. This caused a
massive buildup of old tokens that would never be properly revoked and
purged. Nomad 0.11.3 mostly fixed this but still had a bug in purging
revoked tokens via Raft (fixed in #8553).
The nomad.vault.distributed_tokens_revoked metric is only ticked upon
successful revocation and purging, making any bugs or slowness in the
process difficult to detect.
Logging before a potentially slow revocation+purge operation is
performed will give users much better indications of what activity is
going on should the process fail to make it to the metric.
Fixes https://github.com/hashicorp/nomad/issues/8544
This PR fixes a bug where using `nomad job plan ...` always report no change if the submitted job contain scaling.
The issue has three contributing factors:
1. The plan endpoint doesn't populate the required scaling policy ID; unlike the job register endpoint
2. The plan endpoint suppresses errors on job insertion - the job insertion fails here, because the scaling policy is missing the required ID
3. The scheduler reports no update necessary when the relevant job isn't in store (because the insertion failed)
This PR fixes the first two factors. Changing the scheduler to be more strict might make sense, but may violate some idempotency invariant or make the scheduler more brittle.
Before, Connect Native Tasks needed one of these to work:
- To be run in host networking mode
- To have the Consul agent configured to listen to a unix socket
- To have the Consul agent configured to listen to a public interface
None of these are a great experience, though running in host networking is
still the best solution for non-Linux hosts. This PR establishes a connection
proxy between the Consul HTTP listener and a unix socket inside the alloc fs,
bypassing the network namespace for any Connect Native task. Similar to and
re-uses a bunch of code from the gRPC listener version for envoy sidecar proxies.
Proxy is established only if the alloc is configured for bridge networking and
there is at least one Connect Native task in the Task Group.
Fixes#8290
As of 0.11.3 Vault token revocation and purging was done in batches.
However the batch size was only limited by the number of *non-expired*
tokens being revoked.
Due to bugs prior to 0.11.3, *expired* tokens were not properly purged.
Long-lived clusters could have thousands to *millions* of very old
expired tokens that never got purged from the state store.
Since these expired tokens did not count against the batch limit, very
large batches could be created and overwhelm servers.
This commit ensures expired tokens count toward the batch limit with
this one line change:
```
- if len(revoking) >= toRevoke {
+ if len(revoking)+len(ttlExpired) >= toRevoke {
```
However, this code was difficult to test due to being in a periodically
executing loop. Most of the changes are to make this one line change
testable and test it.
adds in oss components to support enterprise multi-vault namespace feature
upgrade specific doc on vault multi-namespaces
vault docs
update test to reflect new error
The field name `Deployment.TaskGroups` contains a map of `DeploymentState`,
which makes it a little harder to follow state updates when combined with
inconsistent naming conventions, particularly when we also have the state
store or actual `TaskGroup`s in scope. This changeset changes all uses to
`dstate` so as not to be confused with actual TaskGroups.
* nomad/structs/structs: add to Job.Validate
* Update nomad/structs/structs.go
Co-authored-by: Mahmood Ali <mahmood@hashicorp.com>
* nomad/structs/structs: match error strings to the config file
* nomad/structs/structs_test: clarify the test a bit
* nomad/structs/structs_test: typo in the test error comparison
Co-authored-by: Mahmood Ali <mahmood@hashicorp.com>
This fixes a bug where jobs may get "stuck" unprocessed that
dispropotionately affect periodic jobs around leadership transitions.
When registering a job, the job registration and the eval to process it
get applied to raft as two separate transactions; if the job
registration succeeds but eval application fails, the job may remain
unprocessed. Operators may detect such failure, when submitting a job
update and get a 500 error code, and they could retry; periodic jobs
failures are more likely to go unnoticed, and no further periodic
invocations will be processed until an operator force evaluation.
This fixes the issue by ensuring that the job registration and eval
application get persisted and processed atomically in the same raft log
entry.
Also, applies the same change to ensure atomicity in job deregistration.
Backward Compatibility
We must maintain compatibility in two scenarios: mixed clusters where a
leader can handle atomic updates but followers cannot, and a recent
cluster processes old log entries from legacy or mixed cluster mode.
To handle this constraints: ensure that the leader continue to emit the
Evaluation log entry until all servers have upgraded; also, when
processing raft logs, the servers honor evaluations found in both spots,
the Eval in job (de-)registration and the eval update entries.
When an updated server sees mix-mode behavior where an eval is inserted
into the raft log twice, it ignores the second instance.
I made one compromise in consistency in the mixed-mode scenario: servers
may disagree on the eval.CreateIndex value: the leader and updated
servers will report the job registration index while old servers will
report the index of the eval update log entry. This discripency doesn't
seem to be material - it's the eval.JobModifyIndex that matters.
Deployments should wait until kicked off by `Job.Register` so that we can
assert that all regions have a scheduled deployment before starting any
region. This changeset includes the OSS fixes to support the ENT work.
`IsMultiregionStarter` has no more callers in OSS, so remove it here.
It's supposed to be possible for a region not to have `datacenters` set so
that it can use the job's `datacenters` field. This requires that operators
use the same DC name across multiple regions, but that's the default client
configuration.
Before, the service definition for a Connect Native service would always
require setting the `service.task` parameter. Now, that parameter is
automatically inferred when there is only one task in the task group.
Fixes#8274
The multiregion plan diffs swap the old and new versions for each region when
they're edited (rather than added/removed). The `multiregionRegionDiff`
function call incorrectly reversed its arguments for existing regions.
* ar: support opting into binding host ports to default network IP
* fix config plumbing
* plumb node address into network resource
* struct: only handle network resource upgrade path once
* made api.Scaling.Max a pointer, so we can detect (and complain) when it is neglected
* added checks to HCL parsing that it is present
* when Scaling.Max is absent/invalid, don't return extraneous error messages during validation
* tweak to multiregion handling to ensure that the count is valid on the interpolated regional jobs
resolves#8355
* command/agent/host: collect host data, multi platform
* nomad/structs/structs: new HostDataRequest/Response
* client/agent_endpoint: add RPC endpoint
* command/agent/agent_endpoint: add Host
* api/agent: add the Host endpoint
* nomad/client_agent_endpoint: add Agent Host with forwarding
* nomad/client_agent_endpoint: use findClientConn
This changes forwardMonitorClient and forwardProfileClient to use
findClientConn, which was cribbed from the common parts of those
funcs.
* command/debug: call agent hosts
* command/agent/host: eliminate calling external programs
The `nomad volume deregister` command currently returns an error if the volume
has any claims, but in cases where the claims can't be dropped because of
plugin errors, providing a `-force` flag gives the operator an escape hatch.
If the volume has no allocations or if they are all terminal, this flag
deletes the volume from the state store, immediately and implicitly dropping
all claims without further CSI RPCs. Note that this will not also
unmount/detach the volume, which we'll make the responsibility of a separate
`nomad volume detach` command.
This fixes a bug where a batch allocation fails to complete if it has
sidecars.
If the only remaining running tasks in an allocations are sidecars - we
must kill them and mark the allocation as complete.
Add a scatter-gather for multiregion job plans. Each region's servers
interpolate the plan locally in `Job.Plan` but don't distribute the plan as
done in `Job.Run`.
Note that it's not possible to return a usable modify index from a multiregion
plan for use with `-check-index`. Even if we were to force the modify index to
be the same at the start of `Job.Run` the index immediately drifts during each
region's deployments, depending on events local to each region. So we omit
this section of a multiregion plan.
The scheduler returns a very strange error if it detects a port number
out of range. If these would somehow make it to the client they would
overflow when converted to an int32 and could cause conflicts.
This PR adds the capability of running Connect Native Tasks on Nomad,
particularly when TLS and ACLs are enabled on Consul.
The `connect` stanza now includes a `native` parameter, which can be
set to the name of task that backs the Connect Native Consul service.
There is a new Client configuration parameter for the `consul` stanza
called `share_ssl`. Like `allow_unauthenticated` the default value is
true, but recommended to be disabled in production environments. When
enabled, the Nomad Client's Consul TLS information is shared with
Connect Native tasks through the normal Consul environment variables.
This does NOT include auth or token information.
If Consul ACLs are enabled, Service Identity Tokens are automatically
and injected into the Connect Native task through the CONSUL_HTTP_TOKEN
environment variable.
Any of the automatically set environment variables can be overridden by
the Connect Native task using the `env` stanza.
Fixes#6083
If `max_parallel` is not set, all regions should begin in a `running` state
rather than a `pending` state. Otherwise the first region is set to `running`
and then all the remaining regions once it enters `blocked. That behavior is
technically correct in that we have at most `max_parallel` regions running,
but definitely not what a user expects.
In multiregion deployments when ACLs are enabled, the deploymentwatcher needs
an appropriately scoped ACL token with the same `submit-job` rights as the
user who submitted it. The token will already be replicated, so store the
accessor ID so that it can be retrieved by the leader.
The volumewatcher restores itself on notification, but detecting this is racy
because it may reap any claim (or find there are no claims to reap) and
shutdown before we can test whether it's running. This appears to have become
flaky with a new version of golang. The other cases in this test case
sufficiently exercise the start/stop behavior of the volumewatcher, so remove
the flaky section.
The `paused` state is used as an operator safety mechanism, so that they can
debug a deployment or halt one that's causing a wider failure. By using the
`paused` state as the first state of a multiregion deployment, we risked
resuming an intentionally operator-paused deployment because of activity in a
peer region.
This changeset replaces the use of the `paused` state with a `pending` state,
and provides a `Deployment.Run` internal RPC to replace the use of the
`Deployment.Pause` (resume) RPC we were using in `deploymentwatcher`.
* `nextRegion` should take status parameter
* thread Deployment/Job RPCs thru `nextRegion`
* add `nextRegion` calls to `deploymentwatcher`
* use a better description for paused for peer
Integration points for multiregion jobs to be registered in the enterprise
version of Nomad:
* hook in `Job.Register` for enterprise to send job to peer regions
* remove monitoring from `nomad job run` and `nomad job stop` for multiregion jobs
Seth Hoenig