The paginator logic was built when go-memdb iterators would return items
ordered lexicographically by their ID prefixes, but #12054 added the
option for some tables to return results ordered by their `CreateIndex`
instead, which invalidated the previous paginator assumption.
The iterator used for pagination must still return results in some order
so that the paginator can properly handle requests where the next_token
value is not present in the results anymore (e.g., the eval was GC'ed).
In these situations, the paginator will start the returned page in the
first element right after where the requested token should've been.
This commit moves the logic to generate pagination tokens from the
elements being paginated to the iterator itself so that callers can have
more control over the token format to make sure they are properly
ordered and stable.
It also allows configuring the paginator as being ordered in ascending
or descending order, which is relevant when looking for a token that may
not be present anymore.
* Remove redundant schedulable check in `FreeWriteClaims`. If a volume
has been created but not yet claimed, its capabilities will be checked
in `WriteSchedulable` at both scheduling time and claim time. We don't
need to also check them in the `FreeWriteClaims` method.
* Enforce maximum volume claims for writers.
When the scheduler checks feasibility for CSI volumes, the check is
fairly loose: earlier versions of the same job are not counted as
active claims. This allows the scheduler to place new allocations
for the new version of a job, under the assumption that we'll replace
the existing allocations and their volume claims.
But when the alloc runner claims the volume, we need to enforce the
active claims even if they're for allocations of an earlier version of
the job. Otherwise we'll try to mount a volume that's currently being
unmounted, and this will cause replacement allocations to frequently
fail.
* Enforce single-node reader check for read-only volumes. When the
alloc runner makes a claim for a read-only volume, we only check that
the volume is potentially schedulable and not that it actually has
free read claims.
Nomad inherited protocol version numbering configuration from Consul and
Serf, but unlike those projects Nomad has never used it. Nomad's
`protocol_version` has always been `1`.
While the code is effectively unused and therefore poses no runtime
risks to leave, I felt like removing it was best because:
1. Nomad's RPC subsystem has been able to evolve extensively without
needing to increment the version number.
2. Nomad's HTTP API has evolved extensively without increment
`API{Major,Minor}Version`. If we want to version the HTTP API in the
future, I doubt this is the mechanism we would choose.
3. The presence of the `server.protocol_version` configuration
parameter is confusing since `server.raft_protocol` *is* an important
parameter for operators to consider. Even more confusing is that
there is a distinct Serf protocol version which is included in `nomad
server members` output under the heading `Protocol`. `raft_protocol`
is the *only* protocol version relevant to Nomad developers and
operators. The other protocol versions are either deadcode or have
never changed (Serf).
4. If we were to need to version the RPC, HTTP API, or Serf protocols, I
don't think these configuration parameters and variables are the best
choice. If we come to that point we should choose a versioning scheme
based on the use case and modern best practices -- not this 6+ year
old dead code.
These API endpoints now return results in chronological order. They
can return results in reverse chronological order by setting the
query parameter ascending=true.
- Eval.List
- Deployment.List
Update the logic in the Nomad client's alloc health tracker which
erroneously marks existing healthy allocations with dead poststart ephemeral
tasks as unhealthy even if they were already successful during a previous
deployment.
The Plan.Submit endpoint assumed PlanRequest.Plan was never nil. While
there is no evidence it ever has been nil, we should not panic if a nil
plan is ever submitted because that would crash the leader.
This PR exposes the following existing`consul-template` configuration options to Nomad jobspec authors in the `{job.group.task.template}` stanza.
- `wait`
It also exposes the following`consul-template` configuration to Nomad operators in the `{client.template}` stanza.
- `max_stale`
- `block_query_wait`
- `consul_retry`
- `vault_retry`
- `wait`
Finally, it adds the following new Nomad-specific configuration to the `{client.template}` stanza that allows Operators to set bounds on what `jobspec` authors configure.
- `wait_bounds`
Co-authored-by: Tim Gross <tgross@hashicorp.com>
Co-authored-by: Michael Schurter <mschurter@hashicorp.com>
Some operators use very long group/task `shutdown_delay` settings to
safely drain network connections to their workloads after service
deregistration. But during incident response, they may want to cause
that drain to be skipped so they can quickly shed load.
Provide a `-no-shutdown-delay` flag on the `nomad alloc stop` and
`nomad job stop` commands that bypasses the delay. This sets a new
desired transition state on the affected allocations that the
allocation/task runner will identify during pre-kill on the client.
Note (as documented here) that using this flag will almost always
result in failed inbound network connections for workloads as the
tasks will exit before clients receive updated service discovery
information and won't be gracefully drained.
API queries can request pagination using the `NextToken` and `PerPage`
fields of `QueryOptions`, when supported by the underlying API.
Add a `NextToken` field to the `structs.QueryMeta` so that we have a
common field across RPCs to tell the caller where to resume paging
from on their next API call. Include this field on the `api.QueryMeta`
as well so that it's available for future versions of List HTTP APIs
that wrap the response with `QueryMeta` rather than returning a simple
list of structs. In the meantime callers can get the `X-Nomad-NextToken`.
Add pagination to the `Eval.List` RPC by checking for pagination token
and page size in `QueryOptions`. This will allow resuming from the
last ID seen so long as the query parameters and the state store
itself are unchanged between requests.
Add filtering by job ID or evaluation status over the results we get
out of the state store.
Parse the query parameters of the `Eval.List` API into the arguments
expected for filtering in the RPC call.
During incident response, operators may find that automated processes
elsewhere in the organization can be generating new workloads on Nomad
clusters that are unable to handle the workload. This changeset adds a
field to the `SchedulerConfiguration` API that causes all job
registration calls to be rejected unless the request has a management
ACL token.
Give ourselves some room for extension in the UI configuration block
by naming the field `ui_url`, which will let us have an `api_url`.
Fix the template path to ensure we're getting the right value from the
API.
This change modifies the Nomad job register and deregister RPCs to
accept an updated option set which includes eval priority. This
param is optional and override the use of the job priority to set
the eval priority.
In order to ensure all evaluations as a result of the request use
the same eval priority, the priority is shared to the
allocReconciler and deploymentWatcher. This creates a new
distinction between eval priority and job priority.
The Nomad agent HTTP API has been modified to allow setting the
eval priority on job update and delete. To keep consistency with
the current v1 API, job update accepts this as a payload param;
job delete accepts this as a query param.
Any user supplied value is validated within the agent HTTP handler
removing the need to pass invalid requests to the server.
The register and deregister opts functions now all for setting
the eval priority on requests.
The change includes a small change to the DeregisterOpts function
which handles nil opts. This brings the function inline with the
RegisterOpts.
* api: return 404 for alloc FS list/stat endpoints
If the alloc filesystem doesn't have a file requested by the List
Files or Stat File API, we currently return a HTTP 500 error with the
expected "file not found" error message. Return a HTTP 404 error
instead.
* update FS Handler
Previously the FS handler would interpret a 500 status as a 404
in the adapter layer by checking if the response body contained
the text or is the response status
was 500 and then throw an error code for 404.
Co-authored-by: Jai Bhagat <jaybhagat841@gmail.com>
Enhance the CLI in order to return the host network in two flavors
(default, verbose) of the `node status` command.
Fixes: #11223.
Signed-off-by: Alessandro De Blasis <alex@deblasis.net>
Fix a bug where the scheduler may panic when preemption is enabled. The conditions are a bit complicated:
A job with higher priority that schedule multiple allocations that preempt other multiple allocations on the same node, due to port/network/device assignments.
The cause of the bug is incidental mutation of internal cached data. `RankedNode` computes and cache proposed allocations in https://github.com/hashicorp/nomad/blob/v1.1.6/scheduler/rank.go#L42-L53 . But scheduler then mutates the list to remove pre-emptable allocs in https://github.com/hashicorp/nomad/blob/v1.1.6/scheduler/rank.go#L293-L294, and `RemoveAllocs` mutates and sets the tail of cached slice with `nil`s triggering a nil-pointer derefencing case.
I fixed the issue by avoiding the mutation in `RemoveAllocs` - the micro-optimization there doesn't seem necessary.
Fixes https://github.com/hashicorp/nomad/issues/11342
Add a new hostname string parameter to the network block which
allows operators to specify the hostname of the network namespace.
Changing this causes a destructive update to the allocation and it
is omitted if empty from API responses. This parameter also supports
interpolation.
In order to have a hostname passed as a configuration param when
creating an allocation network, the CreateNetwork func of the
DriverNetworkManager interface needs to be updated. In order to
minimize the disruption of future changes, rather than add another
string func arg, the function now accepts a request struct along with
the allocID param. The struct has the hostname as a field.
The in-tree implementations of DriverNetworkManager.CreateNetwork
have been modified to account for the function signature change.
In updating for the change, the enhancement of adding hostnames to
network namespaces has also been added to the Docker driver, whilst
the default Linux manager does not current implement it.
When a node becomes ready, create an eval for all system jobs across
namespaces.
The previous code uses `job.ID` to deduplicate evals, but that ignores
the job namespace. Thus if there are multiple jobs in different
namespaces sharing the same ID/Name, only one will be considered for
running in the new node. Thus, Nomad may skip running some system jobs
in that node.
In a multi-task-group job, treat 0 canary groups as auto-promote.
This change fixes an edge case where Nomad requires a manual promotion,
if the job had any group with canary=0 and rest of groups having
auto_promote set.
Co-authored-by: Michael Schurter <mschurter@hashicorp.com>
This PR implements a new "System Batch" scheduler type. Jobs can
make use of this new scheduler by setting their type to 'sysbatch'.
Like the name implies, sysbatch can be thought of as a hybrid between
system and batch jobs - it is for running short lived jobs intended to
run on every compatible node in the cluster.
As with batch jobs, sysbatch jobs can also be periodic and/or parameterized
dispatch jobs. A sysbatch job is considered complete when it has been run
on all compatible nodes until reaching a terminal state (success or failed
on retries).
Feasibility and preemption are governed the same as with system jobs. In
this PR, the update stanza is not yet supported. The update stanza is sill
limited in functionality for the underlying system scheduler, and is
not useful yet for sysbatch jobs. Further work in #4740 will improve
support for the update stanza and deployments.
Closes#2527
Basically the same as #10896 but with the Affinity struct.
Since we use reflect.DeepEquals for job comparison, there is
risk of false positives for changes due to a job struct with
memoized vs non-memoized strings.
Closes#10897
This PR causes Nomad to no longer memoize the String value of
a Constraint. The private memoized variable may or may not be
initialized at any given time, which means a reflect.DeepEqual
comparison between two jobs (e.g. during Plan) may return incorrect
results.
Fixes#10836
When a task group with `service` block(s) is validated, we validate that there
are no duplicates, but this validation doesn't have access to the task environment
because it hasn't been created yet. Services and checks with interpolation can
be flagged incorrectly as conflicting. Name conflicts in services are not
actually an error in Consul and users have reported wanting to use the same
service name for task groups differentiated by tags.
This PR implements first-class support for Nomad running Consul
Connect Mesh Gateways. Mesh gateways enable services in the Connect
mesh to make cross-DC connections via gateways, where each datacenter
may not have full node interconnectivity.
Consul docs with more information:
https://www.consul.io/docs/connect/gateways/mesh-gateway
The following group level service block can be used to establish
a Connect mesh gateway.
service {
connect {
gateway {
mesh {
// no configuration
}
}
}
}
Services can make use of a mesh gateway by configuring so in their
upstream blocks, e.g.
service {
connect {
sidecar_service {
proxy {
upstreams {
destination_name = "<service>"
local_bind_port = <port>
datacenter = "<datacenter>"
mesh_gateway {
mode = "<mode>"
}
}
}
}
}
}
Typical use of a mesh gateway is to create a bridge between datacenters.
A mesh gateway should then be configured with a service port that is
mapped from a host_network configured on a WAN interface in Nomad agent
config, e.g.
client {
host_network "public" {
interface = "eth1"
}
}
Create a port mapping in the group.network block for use by the mesh
gateway service from the public host_network, e.g.
network {
mode = "bridge"
port "mesh_wan" {
host_network = "public"
}
}
Use this port label for the service.port of the mesh gateway, e.g.
service {
name = "mesh-gateway"
port = "mesh_wan"
connect {
gateway {
mesh {}
}
}
}
Currently Envoy is the only supported gateway implementation in Consul.
By default Nomad client will run the latest official Envoy docker image
supported by the local Consul agent. The Envoy task can be customized
by setting `meta.connect.gateway_image` in agent config or by setting
the `connect.sidecar_task` block.
Gateways require Consul 1.8.0+, enforced by the Nomad scheduler.
Closes#9446
This PR adds two additional constraints on Connect sidecar and gateway tasks,
making sure Nomad schedules them only onto nodes where Connect is actually
enabled on the Consul agent.
Consul requires `connect.enabled = true` and `ports.grpc = <number>` to be
explicitly set on agent configuration before Connect APIs will work. Until
now, Nomad would only validate a minimum version of Consul, which would cause
confusion for users who try to run Connect tasks on nodes where Consul is not
yet sufficiently configured. These contstraints prevent job scheduling on nodes
where Connect is not actually use-able.
Closes#10700
The plans generated by the scheduler produce high-level output of counts on each
evaluation, but when debugging scheduler issues it'd be nice to have a more
detailed view of the resulting plan. Emitting this log at trace minimizes the
overhead, and producing it in the plan applyer makes it easier to find as it
will always be on the leader.
Cluster operators want to have better control over memory
oversubscription and may want to enable/disable it based on their
experience.
This PR adds a scheduler configuration field to control memory
oversubscription. It's additional field that can be set in the [API via Scheduler Config](https://www.nomadproject.io/api-docs/operator/scheduler), or [the agent server config](https://www.nomadproject.io/docs/configuration/server#configuring-scheduler-config).
I opted to have the memory oversubscription be an opt-in, but happy to change it. To enable it, operators should call the API with:
```json
{
"MemoryOversubscriptionEnabled": true
}
```
If memory oversubscription is disabled, submitting jobs specifying `memory_max` will get a "Memory oversubscription is not
enabled" warnings, but the jobs will be accepted without them accessing
the additional memory.
The warning message is like:
```
$ nomad job run /tmp/j
Job Warnings:
1 warning(s):
* Memory oversubscription is not enabled; Task cache.redis memory_max value will be ignored
==> Monitoring evaluation "7c444157"
Evaluation triggered by job "example"
==> Monitoring evaluation "7c444157"
Evaluation within deployment: "9d826f13"
Allocation "aa5c3cad" created: node "9272088e", group "cache"
Evaluation status changed: "pending" -> "complete"
==> Evaluation "7c444157" finished with status "complete"
# then you can examine the Alloc AllocatedResources to validate whether the task is allowed to exceed memory:
$ nomad alloc status -json aa5c3cad | jq '.AllocatedResources.Tasks["redis"].Memory'
{
"MemoryMB": 256,
"MemoryMaxMB": 0
}
```
Add a new driver capability: RemoteTasks.
When a task is run by a driver with RemoteTasks set, its TaskHandle will
be propagated to the server in its allocation's TaskState. If the task
is replaced due to a down node or draining, its TaskHandle will be
propagated to its replacement allocation.
This allows tasks to be scheduled in remote systems whose lifecycles are
disconnected from the Nomad node's lifecycle.
See https://github.com/hashicorp/nomad-driver-ecs for an example ECS
remote task driver.
This PR fixes a bug where Nomad was more restrictive on Ingress Gateway Configuration
Entry definitions than Consul. Before, Nomad would not allow for declaring IGCEs with
http listeners with service name "*", which is a special feature allowable by Consul.
Note: to make http protocol work, a service-default must be defined setting the
protocol to http for each service.
Fixes: #9729
Add Namespace as a top-level field in `/v1/jobs` stub.
The `/v1/jobs` endpoint already includes the namespace under `JobSummary`, though the API is odd, as typically the job ID and Namespace are in the same level, and the oddity complicates the UI frontend development.
The downside of adding it is redundant field, that makes the response body a bit bigger, specially for clusters with large jobs. Though, it should compress nicely and I expect the overhead to be small to overall response size. The benefit of a cleaner and more consistent API seem worth it.
Fixes#10431
This fixes a bug affecting drain nodes, where allocs may fail to be
migrated if they belong to different namespaces but share the same job
name.
The reason is that the helper function that creates the migration evals
indexed the allocs by job ID without accounting for the namespaces.
When job ids clash, only an eval is created for one and the rest of the
allocs remain intact.
Fixes#10172
(cherry-picked from ent without _ent things)
This is part 2/4 of e2e tests for Consul Namespaces. Took a
first pass at what the parameterized tests can look like, but
only on the ENT side for this PR. Will continue to refactor
in the next PRs.
Also fixes 2 bugs:
- Config Entries registered by Nomad Server on job registration
were not getting Namespace set
- Group level script checks were not getting Namespace set
Those changes will need to be copied back to Nomad OSS.
Nomad OSS + no ACLs (previously, needs refactor)
Nomad ENT + no ACLs (this)
Nomad OSS + ACLs (todo)
Nomad ENT + ALCs (todo)
This PR introduces the /v1/search/fuzzy API endpoint, used for fuzzy
searching objects in Nomad. The fuzzy search endpoint routes requests
to the Nomad Server leader, which implements the Search.FuzzySearch RPC
method.
Requests to the fuzzy search API are based on the api.FuzzySearchRequest
object, e.g.
{
"Text": "ed",
"Context": "all"
}
Responses from the fuzzy search API are based on the api.FuzzySearchResponse
object, e.g.
{
"Index": 27,
"KnownLeader": true,
"LastContact": 0,
"Matches": {
"tasks": [
{
"ID": "redis",
"Scope": [
"default",
"example",
"cache"
]
}
],
"evals": [],
"deployment": [],
"volumes": [],
"scaling_policy": [],
"images": [
{
"ID": "redis:3.2",
"Scope": [
"default",
"example",
"cache",
"redis"
]
}
]
},
"Truncations": {
"volumes": false,
"scaling_policy": false,
"evals": false,
"deployment": false
}
}
The API is tunable using the new server.search stanza, e.g.
server {
search {
fuzzy_enabled = true
limit_query = 200
limit_results = 1000
min_term_length = 5
}
}
These values can be increased or decreased, so as to provide more
search results or to reduce load on the Nomad Server. The fuzzy search
API can be disabled entirely by setting `fuzzy_enabled` to `false`.
Consul allows specifying the HTTP body to send in a health check. Nomad
uses Consul for health checking so this just plumbs the value through to
where the Consul API is called.
There is no validation that `body` is not used with an incompatible
check method like GET.
Registration of Nomad volumes previously allowed for a single volume
capability (access mode + attachment mode pair). The recent `volume create`
command requires that we pass a list of requested capabilities, but the
existing workflow for claiming volumes and attaching them on the client
assumed that the volume's single capability was correct and unchanging.
Add `AccessMode` and `AttachmentMode` to `CSIVolumeClaim`, use these fields to
set the initial claim value, and add backwards compatibility logic to handle
the existing volumes that already have claims without these fields.
This PR adds the common OSS changes for adding support for Consul Namespaces,
which is going to be a Nomad Enterprise feature. There is no new functionality
provided by this changeset and hopefully no new bugs.
In order to support new node RPCs, we need to fingerprint plugin capabilities
in more detail. This changeset mirrors recent work to fingerprint controller
capabilities, but is not yet in use by any Nomad RPC.
In order to support new controller RPCs, we need to fingerprint volume
capabilities in more detail and perform controller RPCs only when the specific
capability is present. This fixes a bug in Ceph support where the plugin can
only suport create/delete but we assume that it also supports attach/detach.
The CSI specification requires that we validate a list of `Capability` (access
mode + accessibility) when we create volume, but the existing volume
registration workflow incorrectly validates a single capability. The
specific capability required by a volume claim is checked at the time we make
the claim, so remove the check for `AttachmentMode`/`AcccessMode`.
Start tracking a new MemoryMaxMB field that represents the maximum memory a task
may use in the client. This allows tasks to specify a memory reservation (to be
used by scheduler when placing the task) but use excess memory used on the
client if the client has any.
This commit adds the server tracking for the value, and ensures that allocations
AllocatedResource fields include the value.
node drain: use msgtype on txn so that events are emitted
wip: encoding extension to add Node.Drain field back to API responses
new approach for hiding Node.SecretID in the API, using `json` tag
documented this approach in the contributing guide
refactored the JSON handlers with extensions
modified event stream encoding to use the go-msgpack encoders with the extensions
Add a `PerAlloc` field to volume requests that directs the scheduler to test
feasibility for volumes with a source ID that includes the allocation index
suffix (ex. `[0]`), rather than the exact source ID.
Read the `PerAlloc` field when making the volume claim at the client to
determine if the allocation index suffix (ex. `[0]`) should be added to the
volume source ID.
* Fixup uses of `sanity`
* Remove unnecessary comments.
These checks are better explained by earlier comments about
the context of the test. Per @tgross, moved the tests together
to better reinforce the overall shared context.
* Update nomad/fsm_test.go
RPC endpoints for the user-driven APIs (`UpsertOneTimeToken` and
`ExchangeOneTimeToken`) and token expiration (`ExpireOneTimeTokens`).
Includes adding expiration to the periodic core GC job.
In a deployment with two groups (ex. A and B), if group A's canary becomes
healthy before group B's, the deadline for the overall deployment will be set
to that of group A. When the deployment is promoted, if group A is done it
will not contribute to the next deadline cutoff. Group B's old deadline will
be used instead, which will be in the past and immediately trigger a
deployment progress failure. Reset the progress deadline when the job is
promotion to avoid this bug, and to better conform with implicit user
expectations around how the progress deadline should interact with promotions.
Allow for readiness type checks by configuring nomad to ignore warnings
or errors reported by a service check. This allows the deployment to
progress and while Consul handles introducing the sercive into a
resource pool once the check passes.
The details of host volume and CSI volume requests do not show up in `nomad
plan` outputs, although the updates are detected by the scheduler and result
in an update as expected.
This PR implements Nomad built-in support for running Consul Connect
terminating gateways. Such a gateway can be used by services running
inside the service mesh to access "legacy" services running outside
the service mesh while still making use of Consul's service identity
based networking and ACL policies.
https://www.consul.io/docs/connect/gateways/terminating-gateway
These gateways are declared as part of a task group level service
definition within the connect stanza.
service {
connect {
gateway {
proxy {
// envoy proxy configuration
}
terminating {
// terminating-gateway configuration entry
}
}
}
}
Currently Envoy is the only supported gateway implementation in
Consul. The gateay task can be customized by configuring the
connect.sidecar_task block.
When the gateway.terminating field is set, Nomad will write/update
the Configuration Entry into Consul on job submission. Because CEs
are global in scope and there may be more than one Nomad cluster
communicating with Consul, there is an assumption that any terminating
gateway defined in Nomad for a particular service will be the same
among Nomad clusters.
Gateways require Consul 1.8.0+, checked by a node constraint.
Closes#9445
* Prevent Job Statuses from being calculated twice
https://github.com/hashicorp/nomad/pull/8435 introduced atomic eval
insertion iwth job (de-)registration. This change removes a now obsolete
guard which checked if the index was equal to the job.CreateIndex, which
would empty the status. Now that the job regisration eval insetion is
atomic with the registration this check is no longer necessary to set
the job statuses correctly.
* test to ensure only single job event for job register
* periodic e2e
* separate job update summary step
* fix updatejobstability to use copy instead of modified reference of job
* update envoygatewaybindaddresses copy to prevent job diff on null vs empty
* set ConsulGatewayBindAddress to empty map instead of nil
fix nil assertions for empty map
rm unnecessary guard
* Throw away result of multierror.Append
When given a *multierror.Error, it is mutated, therefore the return
value is not needed.
* Simplify MergeMultierrorWarnings, use StringBuilder
* Hash.Write() never returns an error
* Remove error that was always nil
* Remove error from Resources.Add signature
When this was originally written it could return an error, but that was
refactored away, and callers of it as of today never handle the error.
* Throw away results of io.Copy during Bridge
* Handle errors when computing node class in test
In this change we'll properly return the error in the
CSIPluginTypeMonolith case (which is the type given in DeleteNode()),
and also return the error when the given ID is not found.
This was found via errcheck.
Submitting a job with an ingress gateway in host networking mode
with an absent gateway.proxy block would cause the Nomad client
to panic on NPE.
The consul registration bits would assume the proxy stanza was
not nil, but it could be if the user does not supply any manually
configured envoy proxy settings.
Check the proxy field is not nil before using it.
Fixes#9669
Nomad v1.0.0 introduced a regression where the client configurations
for `connect.sidecar_image` and `connect.gateway_image` would be
ignored despite being set. This PR restores that functionality.
There was a missing layer of interpolation that needs to occur for
these parameters. Since Nomad 1.0 now supports dynamic envoy versioning
through the ${NOMAD_envoy_version} psuedo variable, we basically need
to first interpolate
${connect.sidecar_image} => envoyproxy/envoy:v${NOMAD_envoy_version}
then use Consul at runtime to resolve to a real image, e.g.
envoyproxy/envoy:v${NOMAD_envoy_version} => envoyproxy/envoy:v1.16.0
Of course, if the version of Consul is too old to provide an envoy
version preference, we then need to know to fallback to the old
version of envoy that we used before.
envoyproxy/envoy:v${NOMAD_envoy_version} => envoyproxy/envoy:v1.11.2@sha256:a7769160c9c1a55bb8d07a3b71ce5d64f72b1f665f10d81aa1581bc3cf850d09
Beyond that, we also need to continue to support jobs that set the
sidecar task themselves, e.g.
sidecar_task { config { image: "custom/envoy" } }
which itself could include teh pseudo envoy version variable.
* fix acl event creation
* allow way to access secretID without exposing it to stream
test that values are omitted
test event creation
test acl events
payloads are pointers
fix failing tests, do all security steps inside constructor
* increase time
* ignore empty tokens
* uncomment line
* changelog
