This PR removes the assertion around when the 'task' field of
a check may be set. Starting in Nomad 1.4 we automatically set
the task field on all checks in support of the NSD checks feature.
This is causing validation problems elsewhere, e.g. when a group
service using the Consul provider sets 'task' it will fail
validation that worked previously.
The assertion of leaving 'task' unset was only about making sure
job submitters weren't expecting some behavior, but in practice
is causing bugs now that we need the task field for more than it
was originally added for.
We can simply update the docs, noting when the task field set by
job submitters actually has value.
* docs: clarify nomad vars vs vault
I think we should make the difference in root key management between
Nomad and Vault clear in the concept docs. I didn't see anywhere else in
the docs we compared it.
I also s/secrets/variables everywhere except the first sentence since
the feature is intended to be more generic than secrets. Right now it's
more of a compliment to Consul's kv than Vault due to root key handling
and featureset.
* Update website/content/docs/concepts/variables.mdx
Co-authored-by: Tim Gross <tgross@hashicorp.com>
This is probably undocumented for a reason, but the `enabled` toggle in the
`periodic` stanza is very useful so I figured I try adding it to the docs.
The feature has been secretly avaliable since #9142 and was called out in that
PR as being a dubious addition, only added to avoid regressions.
The use case for disabling a periodic job in this way is to prevent it from
running without modifying the schedule. Ideally Nomad would make it more clear
that this was the case, and allow you to force a run of the job, but even with
those rough edges I think users would benefit from knowing about this toggle.
This changeset adds new architecture internals documents to the contributing
guide. These are intentionally here and not on the public-facing website because
the material is not required for operators and includes a lot of diagrams that
we can cheaply maintain with mermaid syntax but would involve art assets to have
up on the main site that would become quickly out of date as code changes happen
and be extremely expensive to maintain. However, these should be suitable to use
as points of conversation with expert end users.
Included:
* A description of Evaluation triggers and expected counts, with examples.
* A description of Evaluation states and implicit states. This is taken from an
internal document in our team wiki.
* A description of how writing the State Store works. This is taken from a
diagram I put together a few months ago for internal education purposes.
* A description of Evaluation lifecycle, from registration to running
Allocations. This is mostly lifted from @lgfa29's amazing mega-diagram, but
broken into digestible chunks and without multi-region deployments, which I'd
like to cover in a future doc.
Also includes adding Deployments to our public-facing glossary.
Co-authored-by: Luiz Aoqui <luiz@hashicorp.com>
Co-authored-by: Michael Schurter <mschurter@hashicorp.com>
Co-authored-by: Seth Hoenig <shoenig@duck.com>
This reverts PR #12416 and commit 6668ce022ac561f75ad113cc838b1fb786f11f79.
While the driver options are well and truly deprecated, this documentation also
covers features like `fingerprint.denylist` that are not available any other
way. Let's revert this until #12420 is ready.
* cleanup: fixup linter warnings in schedular/feasible.go
* core: numeric operands comparisons in constraints
This PR changes constraint comparisons to be numeric rather than
lexical if both operands are integers or floats.
Inspiration #4856Closes#4729Closes#14719
* fix: always parse as int64
* docs: write a lot of words about heartbeats
Alternative to #14670
* Apply suggestions from code review
Co-authored-by: Tim Gross <tgross@hashicorp.com>
* use descriptive title for link
* rework example of high failover ttl
Co-authored-by: Tim Gross <tgross@hashicorp.com>
* fingerprint: add node attr for reserverable cores
Add an attribute for the number of reservable CPU cores as they may
differ from the existing `cpu.numcores` due to client configuration or
OS support.
Hopefully clarifies some confusion in #14676
* add changelog
* num_reservable_cores -> reservablecores
Extension of #14673
Once Vault is initially fingerprinted, extend the period since changes
should be infrequent and the fingerprint is relatively expensive since
it is contacting a central Vault server.
Also move the period timer reset *after* the fingerprint. This is
similar to #9435 where the idea is to ensure the retry period starts
*after* the operation is attempted. 15s will be the *minimum* time
between fingerprints now instead of the *maximum* time between
fingerprints.
In the case of Vault fingerprinting, the original behavior might cause
the following:
1. Timer is reset to 15s
2. Fingerprint takes 16s
3. Timer has already elapsed so we immediately Fingerprint again
Even if fingerprinting Vault only takes a few seconds, that may very
well be due to excessive load and backing off our fingerprints is
desirable. The new bevahior ensures we always wait at least 15s between
fingerprint attempts and should allow some natural jittering based on
server load and network latency.
Clients periodically fingerprint Vault and Consul to ensure the server has
updated attributes in the client's fingerprint. If the client can't reach
Vault/Consul, the fingerprinter clears the attributes and requires a node
update. Although this seems like correct behavior so that we can detect
intentional removal of Vault/Consul access, it has two serious failure modes:
(1) If a local Consul agent is restarted to pick up configuration changes and the
client happens to fingerprint at that moment, the client will update its
fingerprint and result in evaluations for all its jobs and all the system jobs
in the cluster.
(2) If a client loses Vault connectivity, the same thing happens. But the
consequences are much worse in the Vault case because Vault is not run as a
local agent, so Vault connectivity failures are highly correlated across the
entire cluster. A 15 second Vault outage will cause a new `node-update`
evalution for every system job on the cluster times the number of nodes, plus
one `node-update` evaluation for every non-system job on each node. On large
clusters of 1000s of nodes, we've seen this create a large backlog of evaluations.
This changeset updates the fingerprinting behavior to keep the last fingerprint
if Consul or Vault queries fail. This prevents a storm of evaluations at the
cost of requiring a client restart if Consul or Vault is intentionally removed
from the client.
In Nomad 1.2.6 we shipped `eval list`, which accepts a `-json` flag, and
deprecated the usage of `eval status` without an evaluation ID with an upgrade
note that it would be removed in Nomad 1.4.0. This changeset completes that
work.
* scheduler: stopped-yet-running allocs are still running
* scheduler: test new stopped-but-running logic
* test: assert nonoverlapping alloc behavior
Also add a simpler Wait test helper to improve line numbers and save few
lines of code.
* docs: tried my best to describe #10446
it's not concise... feedback welcome
* scheduler: fix test that allowed overlapping allocs
* devices: only free devices when ClientStatus is terminal
* test: output nicer failure message if err==nil
Co-authored-by: Mahmood Ali <mahmood@hashicorp.com>
Co-authored-by: Michael Schurter <mschurter@hashicorp.com>
* Fixing heading order, adding text for links
* Apply suggestions from code review
Co-authored-by: Tim Gross <tgross@hashicorp.com>
* Applying more suggestions from code review
Co-authored-by: Tim Gross <tgross@hashicorp.com>
A Nomad user reported problems with CSI volumes associated with failed
allocations, where the Nomad server did not send a controller unpublish RPC.
The controller unpublish is skipped if other non-terminal allocations on the
same node claim the volume. The check has a bug where the allocation belonging
to the claim being freed was included in the check incorrectly. During a normal
allocation stop for job stop or a new version of the job, the allocation is
terminal. But allocations that fail are not yet marked terminal at the point in
time when the client sends the unpublish RPC to the server.
For CSI plugins that support controller attach/detach, this means that the
controller will not be able to detach the volume from the allocation's host and
the replacement claim will fail until a GC is run. This changeset fixes the
conditional so that the claim's own allocation is not included, and makes the
logic easier to read. Include a test case covering this path.
Also includes two minor extra bugfixes:
* Entities we get from the state store should always be copied before
altering. Ensure that we copy the volume in the top-level unpublish workflow
before handing off to the steps.
* The list stub object for volumes in `nomad/structs` did not match the stub
object in `api`. The `api` package also did not include the current
readers/writers fields that are expected by the UI. True up the two objects and
add the previously undocumented fields to the docs.
When configuring Consul Service Mesh, it's sometimes necessary to
provide dynamic value that are only known to Nomad at runtime. By
interpolating configuration values (in addition to configuration keys),
user are able to pass these dynamic values to Consul from their Nomad
jobs.
These options are mutually exclusive but, since `-hcl2-strict` defaults
to `true` users had to explicitily set it to `false` when using `-hcl1`.
Also return `255` when job plan fails validation as this is the expected
code in this situation.
Nomad is generally compliant with the CSI specification for Container
Orchestrators (CO), except for unimplemented features. However, some storage
vendors have built CSI plugins that are not compliant with the specification or
which expect that they're only deployed on Kubernetes. Nomad cannot vouch for
the compatibility of any particular plugin, so clarify this in the docs.
Co-authored-by: Derek Strickland <1111455+DerekStrickland@users.noreply.github.com>
The ACL command docs are now found within a sub-dir like the
operator command docs. Updates to the ACL token commands to
accommodate token expiry have also been added.
The ACL API docs are now found within a sub-dir like the operator
API docs. The ACL docs now include the ACL roles endpoint as well
as updated ACL token endpoints for token expiration.
The configuration section is also updated to accommodate the new
ACL and server parameters for the new ACL features.
Update the on-disk format for the root key so that it's wrapped with a unique
per-key/per-server key encryption key. This is a bit of security theatre for the
current implementation, but it uses `go-kms-wrapping` as the interface for
wrapping the key. This provides a shim for future support of external KMS such
as cloud provider APIs or Vault transit encryption.
* Removes the JSON serialization extension we had on the `RootKey` struct; this
struct is now only used for key replication and not for disk serialization, so
we don't need this helper.
* Creates a helper for generating cryptographically random slices of bytes that
properly accounts for short reads from the source.
* No observable functional changes outside of the on-disk format, so there are
no test updates.
* allocrunner: handle lifecycle when all tasks die
When all tasks die the Coordinator must transition to its terminal
state, coordinatorStatePoststop, to unblock poststop tasks. Since this
could happen at any time (for example, a prestart task dies), all states
must be able to transition to this terminal state.
* allocrunner: implement different alloc restarts
Add a new alloc restart mode where all tasks are restarted, even if they
have already exited. Also unifies the alloc restart logic to use the
implementation that restarts tasks concurrently and ignores
ErrTaskNotRunning errors since those are expected when restarting the
allocation.
* allocrunner: allow tasks to run again
Prevent the task runner Run() method from exiting to allow a dead task
to run again. When the task runner is signaled to restart, the function
will jump back to the MAIN loop and run it again.
The task runner determines if a task needs to run again based on two new
task events that were added to differentiate between a request to
restart a specific task, the tasks that are currently running, or all
tasks that have already run.
* api/cli: add support for all tasks alloc restart
Implement the new -all-tasks alloc restart CLI flag and its API
counterpar, AllTasks. The client endpoint calls the appropriate restart
method from the allocrunner depending on the restart parameters used.
* test: fix tasklifecycle Coordinator test
* allocrunner: kill taskrunners if all tasks are dead
When all non-poststop tasks are dead we need to kill the taskrunners so
we don't leak their goroutines, which are blocked in the alloc restart
loop. This also ensures the allocrunner exits on its own.
* taskrunner: fix tests that waited on WaitCh
Now that "dead" tasks may run again, the taskrunner Run() method will
not return when the task finishes running, so tests must wait for the
task state to be "dead" instead of using the WaitCh, since it won't be
closed until the taskrunner is killed.
* tests: add tests for all tasks alloc restart
* changelog: add entry for #14127
* taskrunner: fix restore logic.
The first implementation of the task runner restore process relied on
server data (`tr.Alloc().TerminalStatus()`) which may not be available
to the client at the time of restore.
It also had the incorrect code path. When restoring a dead task the
driver handle always needs to be clear cleanly using `clearDriverHandle`
otherwise, after exiting the MAIN loop, the task may be killed by
`tr.handleKill`.
The fix is to store the state of the Run() loop in the task runner local
client state: if the task runner ever exits this loop cleanly (not with
a shutdown) it will never be able to run again. So if the Run() loops
starts with this local state flag set, it must exit early.
This local state flag is also being checked on task restart requests. If
the task is "dead" and its Run() loop is not active it will never be
able to run again.
* address code review requests
* apply more code review changes
* taskrunner: add different Restart modes
Using the task event to differentiate between the allocrunner restart
methods proved to be confusing for developers to understand how it all
worked.
So instead of relying on the event type, this commit separated the logic
of restarting an taskRunner into two methods:
- `Restart` will retain the current behaviour and only will only restart
the task if it's currently running.
- `ForceRestart` is the new method where a `dead` task is allowed to
restart if its `Run()` method is still active. Callers will need to
restart the allocRunner taskCoordinator to make sure it will allow the
task to run again.
* minor fixes
This PR documents a change made in the enterprise version of nomad that addresses the following issue:
When a user tries to filter audit logs, they do so with a stanza that looks like the following:
audit {
enabled = true
filter "remove deletes" {
type = "HTTPEvent"
endpoints = ["*"]
stages = ["OperationComplete"]
operations = ["DELETE"]
}
}
When specifying both an "endpoint" and a "stage", the events with both matching a "endpoint" AND a matching "stage" will be filtered.
When specifying both an "endpoint" and an "operation" the events with both matching a "endpoint" AND a matching "operation" will be filtered.
When specifying both a "stage" and an "operation" the events with a matching a "stage" OR a matching "operation" will be filtered.
The "OR" logic with stages and operations is unexpected and doesn't allow customers to get specific on which events they want to filter. For instance the following use-case is impossible to achieve: "I want to filter out all OperationReceived events that have the DELETE verb".
The original design for workload identities and ACLs allows for operators to
extend the automatic capabilities of a workload by using a specially-named
policy. This has shown to be potentially unsafe because of naming collisions, so
instead we'll allow operators to explicitly attach a policy to a workload
identity.
This changeset adds workload identity fields to ACL policy objects and threads
that all the way down to the command line. It also a new secondary index to the
ACL policy table on namespace and job so that claim resolution can efficiently
query for related policies.
When a Nomad agent starts and loads jobs that already existed in the
cluster, the default template uid and gid was being set to 0, since this
is the zero value for int. This caused these jobs to fail in
environments where it was not possible to use 0, such as in Windows
clients.
In order to differentiate between an explicit 0 and a template where
these properties were not set we need to use a pointer.
This PR updates the checks documentation to mention support for checks
when using the Nomad service provider. There are limitations of NSD
compared to Consul, and those configuration options are now noted as
being Consul-only.
* Initialized keyboard service
Neat but funky: dynamic subnav traversal
👻
generalized traverseSubnav method
Shift as special modifier key
Nice little demo panel
Keyboard shortcuts keycard
Some animation styles on keyboard shortcuts
Handle situations where a link is deeply nested from its parent menu item
Keyboard service cleanup
helper-based initializer and teardown for new contextual commands
Keyboard shortcuts modal component added and demo-ghost removed
Removed j and k from subnav traversal
Register and unregister methods for subnav plus new subnavs for volumes and volume
register main nav method
Generalizing the register nav method
12762 table keynav (#12975)
* Experimental feature: shortcut visual hints
* Long way around to a custom modifier for keyboard shortcuts
* dynamic table and list iterative shortcuts
* Progress with regular old tether
* Delogging
* Table Keynav tether fix, server and client navs, and fix to shiftless on modified arrow keys
Go to Optimize keyboard link and storage key changed to g r
parameterized jobs keyboard nav
Dynamic numeric keynav for multiple tables (#13482)
* Multiple tables init
* URL-bind enumerable keyboard commands and add to more taskRow and allocationRows
* Type safety and lint fixes
* Consolidated push to keyCommands
* Default value when removing keyCommands
* Remove the URL-based removal method and perform a recompute on any add
Get tests passing in Keynav: remove math helpers and a few other defensive moves (#13761)
* Remove ember math helpers
* Test fixes for jobparts/body
* Kill an unneeded integration helper test
* delog
* Trying if disabling percy lets this finish
* Okay so its not percy; try parallelism in circle
* Percyless yet again
* Trying a different angle to not have percy
* Upgrade percy to 1.6.1
[ui] Keyboard nav: "u" key to go up a level (#13754)
* U to go up a level
* Mislabelled my conditional
* Custom lint ignore rule
* Custom lint ignore rule, this time with commas
* Since we're getting rid of ember math helpers elsewhere, do the math ourselves here
Replace ArrowLeft etc. with an ascii arrow (#13776)
* Replace ArrowLeft etc. with an ascii arrow
* non-mutative helper cleanup
Keyboard Nav: let users rebind their shortcuts (#13781)
* click-outside and shortcuts enabled/disabled toggle
* Trap focus when modal open
* Enabled/disabled saved to localStorage
* Autofocus edit button on variable index
* Modal overflow styles
* Functional rebind
* Saving rebinds to localStorage for all majors
* Started on defaultCommandBindings
* Modal header style and cancel rebind on escape
* keyboardable keybindings w buttons instead of spans
* recording and defaultvalues
* Enter short-circuits rebind
* Only some commands are rebindable, and dont show dupes
* No unused get import
* More visually distinct header on modal
* Disallowed keys for rebind, showing buffer as you type, and moving dedupe to modal logic
willDestroy hook to prevent tests from doubling/tripling up addEventListener on kb events
remove unused tests
Keyboard Navigation acceptance tests (#13893)
* Acceptance tests for keyboard modal
* a11y audit fix and localStorage clear
* Bind/rebind/localStorage tests
* Keyboard tests for dynamic nav and tables
* Rebinder and assert expectation
* Second percy snapshot showing hints no longer relevant
Weird issue where linktos with query props specifically from the task-groups page would fail to route / hit undefined.shouldSuperCede errors
Adds the concept of exclusivity to a keycommand, removing peers that also share its label
Lintfix
Changelog and PR feedback
Changelog and PR feedback
Fix to rebinding in firefox by blurring the now-disabled button on rebind (#14053)
* Secure Variables shortcuts removed
* Variable index route autofocus removed
* Updated changelog entry
* Updated changelog entry
* Keynav docs (#14148)
* Section added to the API Docs UI page
* Added a note about disabling
* Prev and Next order
* Remove dev log and unneeded comments
The List RPCs only checked the ACL for the Prefix argument of the request. Add
an ACL filter to the paginator for the List RPC.
Extend test coverage of ACLs in the List RPC and in the `acl` package, and add a
"deny" capability so that operators can deny specific paths or prefixes below an
allowed path.
This PR changes the behavior of 'nomad job validate' to forward the
request to the nomad leader, rather than responding from any server.
This is because we need the leader when validating Vault tokens, since
the leader is the only server with an active vault client.
The QEMU driver can take an optional `graceful_shutdown` configuration
which will create a Unix socket to send ACPI shutdown signal to the VM.
Unix sockets have a hard length limit and the driver implementation
assumed that QEMU versions 2.10.1 were able to handle longer paths. This
is not correct, the linked QEMU fix only changed the behaviour from
silently truncating longer socket paths to throwing an error.
By validating the socket path before starting the QEMU machine we can
provide users a more actionable and meaningful error message, and by
using a shorter socket file name we leave a bit more room for
user-defined values in the path, such as the task name.
The maximum length allowed is also platform-dependant, so validation
needs to be different for each OS.
UID/GID 0 is usually reserved for the root user/group. While Nomad
clients are expected to run as root it may not always be the case.
Setting these values as -1 if not defined will fallback to the pervious
behaviour of not attempting to set file ownership and use whatever
UID/GID the Nomad agent is running as. It will also keep backwards
compatibility, which is specially important for platforms where this
feature is not supported, like Windows.
* Allow specification of CSI staging and publishing directory path
* Add website documentation for stage_publish_dir
* Replace erroneous reference to csi_plugin.mount_config with csi_plugin.mount_dir
* Avoid requiring CSI plugins to be redeployed after introducing StagePublishDir
Move the secure variables quota enforcement calls into the state store to ensure
quota checks are atomic with quota updates (in the same transaction).
Switch to a machine-size int instead of a uint64 for quota tracking. The
ENT-side quota spec is described as int, and negative values have a meaning as
"not permitted at all". Using the same type for tracking will make it easier to
the math around checks, and uint64 is infeasibly large anyways.
Add secure vars to quota HTTP API and CLI outputs and API docs.
Document the secure variables keyring commands, document the aliased
gossip keyring commands, and note that the old gossip keyring commands
are deprecated.
Return 429 response on HTTP max connection limit. Instead of silently closing
the connection, return a `429 Too Many Requests` HTTP response with a helpful
error message to aid debugging when the connection limit is unintentionally
reached.
Set a 10-millisecond write timeout and rate limiter for connection-limit 429
response to prevent writing the HTTP response from consuming too many server
resources.
Add `nomad.agent.http.exceeded metric` counting the number of HTTP connections
exceeding concurrency limit.
This PR creates a top-level 'check' page for job-specification docs.
The content for checks is about half the content of the service page, and
is about to increase in size when we add docs about Nomad service checks.
Seemed like a good idea to just split the checks section out into its own
thing (e.g. check_restart is already a topic).
Doing the move first lets us backport this change without adding Nomad service
check stuff yet.
Mostly just a lift-and-shift but with some tweaked examples to de-emphasize
the use of script checks.
The "Secure Nomad with Access Control" guide provides a tutorial for
bootstrapping Nomad ACLs, writing policies, and creating tokens. Add a reference
guide just for the ACL policy specification.
* docs: tighten up parameterized job metrics docs
* docs: improve alloc status descriptions
Remove `nomad.client.allocations.start` as it doesn't exist.
Related to #13740
- blocked_evals.total_blocked is the number of evals blocked for *any*
reason
- blocked_evals.total_quota_limit is the number of evals blocked by
quota limits, but critically: their resources are *not* counted in the
cpu/memory
Plan rejections occur when the scheduler work and the leader plan
applier disagree on the feasibility of a plan. This may happen for valid
reasons: since Nomad does parallel scheduling, it is expected that
different workers will have a different state when computing placements.
As the final plan reaches the leader plan applier, it may no longer be
valid due to a concurrent scheduling taking up intended resources. In
these situations the plan applier will notify the worker that the plan
was rejected and that they should refresh their state before trying
again.
In some rare and unexpected circumstances it has been observed that
workers will repeatedly submit the same plan, even if they are always
rejected.
While the root cause is still unknown this mitigation has been put in
place. The plan applier will now track the history of plan rejections
per client and include in the plan result a list of node IDs that should
be set as ineligible if the number of rejections in a given time window
crosses a certain threshold. The window size and threshold value can be
adjusted in the server configuration.
To avoid marking several nodes as ineligible at one, the operation is rate
limited to 5 nodes every 30min, with an initial burst of 10 operations.
Fixes#13505
This fixes#13505 by treating reserved_ports like we treat a lot of jobspec settings: merging settings from more global stanzas (client.reserved.reserved_ports) "down" into more specific stanzas (client.host_networks[].reserved_ports).
As discussed in #13505 there are other options, and since it's totally broken right now we have some flexibility:
Treat overlapping reserved_ports on addresses as invalid and refuse to start agents. However, I'm not sure there's a cohesive model we want to publish right now since so much 0.9-0.12 compat code still exists! We would have to explain to folks that if their -network-interface and host_network addresses overlapped, they could only specify reserved_ports in one place or the other?! It gets ugly.
Use the global client.reserved.reserved_ports value as the default and treat host_network[].reserverd_ports as overrides. My first suggestion in the issue, but @groggemans made me realize the addresses on the agent's interface (as configured by -network-interface) may overlap with host_networks, so you'd need to remove the global reserved_ports from addresses shared with a shared network?! This seemed really confusing and subtle for users to me.
So I think "merging down" creates the most expressive yet understandable approach. I've played around with it a bit, and it doesn't seem too surprising. The only frustrating part is how difficult it is to observe the available addresses and ports on a node! However that's a job for another PR.
The sidebar navigation tree for the `operator` sub-sub commands is
getting cluttered and we have a new set of commands coming to support
secure variables keyring as well. Move these all under their own
subtrees.
Use the same output format when listing multiple evals in the `eval
list` command and when `eval status <prefix>` matches more than one
eval.
Include the eval namespace in all output formats and always include the
job ID in `eval status` since, even `node-update` evals are related to a
job.
Add Node ID to the evals table output to help differentiate
`node-update` evals.
Co-authored-by: James Rasell <jrasell@hashicorp.com>
* core: allow pause/un-pause of eval broker on region leader.
* agent: add ability to pause eval broker via scheduler config.
* cli: add operator scheduler commands to interact with config.
* api: add ability to pause eval broker via scheduler config
* e2e: add operator scheduler test for eval broker pause.
* docs: include new opertor scheduler CLI and pause eval API info.
This PR adds the 'choose' query parameter to the '/v1/service/<service>' endpoint.
The value of 'choose' is in the form '<number>|<key>', number is the number
of desired services and key is a value unique but consistent to the requester
(e.g. allocID).
Folks aren't really expected to use this API directly, but rather through consul-template
which will soon be getting a new helper function making use of this query parameter.
Example,
curl 'localhost:4646/v1/service/redis?choose=2|abc123'
Note: consul-templte v0.29.1 includes the necessary nomadServices functionality.
In addition to jobs, there are other objects in Nomad that have a
specific format and can be provided to commands and API endpoints.
This commit creates a new menu section to hold the specification for
volumes and update the command pages to point to the new centralized
definition.
Redirecting the previous entries is not possible with `redirect.js`
because they are done server-side and URL fragments are not accessible
to detect a match. So we provide hidden anchors with a link to the new
page to guide users towards the new documentation.
Co-authored-by: Tim Gross <tgross@hashicorp.com>
* website: fix redirects with fragments
Vercel redirects don't support fragments in relative destination paths,
so an absolute URL must be specified instead.
* website: fix Vercel redirect documentation link
Fix numerous go-getter security issues:
- Add timeouts to http, git, and hg operations to prevent DoS
- Add size limit to http to prevent resource exhaustion
- Disable following symlinks in both artifacts and `job run`
- Stop performing initial HEAD request to avoid file corruption on
retries and DoS opportunities.
**Approach**
Since Nomad has no ability to differentiate a DoS-via-large-artifact vs
a legitimate workload, all of the new limits are configurable at the
client agent level.
The max size of HTTP downloads is also exposed as a node attribute so
that if some workloads have large artifacts they can specify a high
limit in their jobspecs.
In the future all of this plumbing could be extended to enable/disable
specific getters or artifact downloading entirely on a per-node basis.
The description of `mount_flags` provides incorrect example
of the accepted value format.
This fixes the issue by changing the example from a string
`ro,noatime` to a slice of strings `["ro", "noatime"]`.
Nomad errors out when attempting to specify a task for a service that uses consul connect but does not have script or gRPC checks. See 304d0cf595/nomad/structs/structs.go (L6643) for details.
Closes#12927Closes#12958
This PR updates the version of redis used in our examples from 3.2 to 7.
The old version is very not supported anymore, and we should be setting
a good example by using a supported version.
The long-form example job is now fixed so that the service stanza uses
nomad as the service discovery provider, and so now the job runs without
a requirement of having Consul running and configured.
The shortlink /s/port-plan-failure is logged when a plan for a node is
rejected to help users debug and mitigate repeated `plan for node
rejected` failures.
The current link to #9506 is... less than useful. It is not clear to
users what steps they should take to either fix their cluster or
contribute to the issue.
While .../monitoring-nomad#progess isn't as comprehensive as it could
be, it's a much more gentle introduction to the class of bug than the
original issue.
In #12324 we made it so that plugins wait until the node drain is
complete, as we do for system jobs. But we neglected to mark the node
drain as complete once only plugins (or system jobs) remaining, which
means that the node drain is left in a draining state until the
`deadline` time expires. This was incorrectly documented as expected
behavior in #12324.
notably:
- name of the compiled binary is 'nomad-device-nvidia', not 'nvidia-gpu'
- link to Nvidia docs for installing the container runtime toolkit
- list docker v19.03 as minimum version, to track with nvidia's new container runtime toolkit
The capacity fields for `create volume` set bounds on the resulting
size of the volume, but the ultimate size of the volume will be
determined by the storage provider (between the min and max). Clarify
this in the documentation and provide a suggestion for how to set a
exact size.
This test exercises upgrades between 0.8 and Nomad versions greater
than 0.9. We have not supported 0.8.x in a very long time and in any
case the test has been marked to skip because the downloader doesn't
work.
* docs: update json jobs docs
Did you know that Nomad has not 1 but 2 JSON formats for jobs? 2½ if you
want to acknowledge that sometimes our JSON job representations have a
Job top-level wrapper and sometimes do not.
The 2½ formats are:
```
1. HCL JSON
2. Input API JSON (top-level Job field)
2.5. Output API JSON (lacks top-level Job field)
```
`#2` is what our docs consider our API JSON. `#2.5` seems to be an
accident of history we can't fix with breaking API compatibility.
`#1` is an even more interesting accident of history: the `jobspec2`
package automatically detects if the input to Parse is JSON and switches
to a JSON parser. This behavior is undocumented, the format is
unspecified, and there is no official HashiCorp tooling to produce this
JSON from HCL. The plot thickens when you discover popular third party
tools like hcl2json.com and https://github.com/tmccombs/hcl2json seem to
produce JSON that `nomad run` accepts!
Since we have no telemetry around whether or not anyone passes HCL JSON
to `nomad run`, and people don't file bugs around features that Just
Work, I'm choosing to leave that code path in place and *acknowledged
but not suggested* in documentation.
See https://github.com/hashicorp/hcl/issues/498 for a more comprehensive
discussion of what officially supporting HCL JSON in Nomad would look
like.
(I also added some of the missing fields to the (Input API flavor) JSON
Job documentation, but it still needs a lot of work to be
comprehensive.)
Co-authored-by: Tim Gross <tgross@hashicorp.com>
After a more detailed analysis of this feature, the approach taken in
PR #12449 was found to be not ideal due to poor UX (users are
responsible for setting the entity alias they would like to use) and
issues around jobs potentially masquerading itself as another Vault
entity.
This PR introduces the `address` field in the `service` block so that Nomad
or Consul services can be registered with a custom `.Address.` to advertise.
The address can be an IP address or domain name. If the `address` field is
set, the `service.address_mode` must be set in `auto` mode.
* cli: add -json flag to support job commands
While the CLI has always supported running JSON jobs, its support has
been via HCLv2's JSON parsing. I have no idea what format it expects the
job to be in, but it's absolutely not in the same format as the API
expects.
So I ignored that and added a new -json flag to explicitly support *API*
style JSON jobspecs.
The jobspecs can even have the wrapping {"Job": {...}} envelope or not!
* docs: fix example for `nomad job validate`
We haven't been able to validate inside driver config stanzas ever since
the move to task driver plugins. 😭
The new `namespace apply` feature that allows for passing a namespace
specification file detects the difference between an empty namespace
and a namespace specification by checking if the file exists. For most
cases, the file will have an extension like `.hcl` and so there's
little danger that a user will apply a file spec when they intended to
apply a file name.
But because directory names typically don't include an extension,
you're much more likely to collide when trying to `namespace apply` by
name only, and then you get a confusing error message of the form:
Failed to read file: read $namespace: is a directory
Detect the case where the namespace name collides with a directory in
the current working directory, and skip trying to load the directory.
