Add a `PerAlloc` field to volume requests that directs the scheduler to test
feasibility for volumes with a source ID that includes the allocation index
suffix (ex. `[0]`), rather than the exact source ID.
Read the `PerAlloc` field when making the volume claim at the client to
determine if the allocation index suffix (ex. `[0]`) should be added to the
volume source ID.
* Fixup uses of `sanity`
* Remove unnecessary comments.
These checks are better explained by earlier comments about
the context of the test. Per @tgross, moved the tests together
to better reinforce the overall shared context.
* Update nomad/fsm_test.go
RPC endpoints for the user-driven APIs (`UpsertOneTimeToken` and
`ExchangeOneTimeToken`) and token expiration (`ExpireOneTimeTokens`).
Includes adding expiration to the periodic core GC job.
In a deployment with two groups (ex. A and B), if group A's canary becomes
healthy before group B's, the deadline for the overall deployment will be set
to that of group A. When the deployment is promoted, if group A is done it
will not contribute to the next deadline cutoff. Group B's old deadline will
be used instead, which will be in the past and immediately trigger a
deployment progress failure. Reset the progress deadline when the job is
promotion to avoid this bug, and to better conform with implicit user
expectations around how the progress deadline should interact with promotions.
Allow for readiness type checks by configuring nomad to ignore warnings
or errors reported by a service check. This allows the deployment to
progress and while Consul handles introducing the sercive into a
resource pool once the check passes.
The details of host volume and CSI volume requests do not show up in `nomad
plan` outputs, although the updates are detected by the scheduler and result
in an update as expected.
This PR implements Nomad built-in support for running Consul Connect
terminating gateways. Such a gateway can be used by services running
inside the service mesh to access "legacy" services running outside
the service mesh while still making use of Consul's service identity
based networking and ACL policies.
https://www.consul.io/docs/connect/gateways/terminating-gateway
These gateways are declared as part of a task group level service
definition within the connect stanza.
service {
connect {
gateway {
proxy {
// envoy proxy configuration
}
terminating {
// terminating-gateway configuration entry
}
}
}
}
Currently Envoy is the only supported gateway implementation in
Consul. The gateay task can be customized by configuring the
connect.sidecar_task block.
When the gateway.terminating field is set, Nomad will write/update
the Configuration Entry into Consul on job submission. Because CEs
are global in scope and there may be more than one Nomad cluster
communicating with Consul, there is an assumption that any terminating
gateway defined in Nomad for a particular service will be the same
among Nomad clusters.
Gateways require Consul 1.8.0+, checked by a node constraint.
Closes#9445
* Prevent Job Statuses from being calculated twice
https://github.com/hashicorp/nomad/pull/8435 introduced atomic eval
insertion iwth job (de-)registration. This change removes a now obsolete
guard which checked if the index was equal to the job.CreateIndex, which
would empty the status. Now that the job regisration eval insetion is
atomic with the registration this check is no longer necessary to set
the job statuses correctly.
* test to ensure only single job event for job register
* periodic e2e
* separate job update summary step
* fix updatejobstability to use copy instead of modified reference of job
* update envoygatewaybindaddresses copy to prevent job diff on null vs empty
* set ConsulGatewayBindAddress to empty map instead of nil
fix nil assertions for empty map
rm unnecessary guard
* Throw away result of multierror.Append
When given a *multierror.Error, it is mutated, therefore the return
value is not needed.
* Simplify MergeMultierrorWarnings, use StringBuilder
* Hash.Write() never returns an error
* Remove error that was always nil
* Remove error from Resources.Add signature
When this was originally written it could return an error, but that was
refactored away, and callers of it as of today never handle the error.
* Throw away results of io.Copy during Bridge
* Handle errors when computing node class in test
In this change we'll properly return the error in the
CSIPluginTypeMonolith case (which is the type given in DeleteNode()),
and also return the error when the given ID is not found.
This was found via errcheck.
Submitting a job with an ingress gateway in host networking mode
with an absent gateway.proxy block would cause the Nomad client
to panic on NPE.
The consul registration bits would assume the proxy stanza was
not nil, but it could be if the user does not supply any manually
configured envoy proxy settings.
Check the proxy field is not nil before using it.
Fixes#9669
Nomad v1.0.0 introduced a regression where the client configurations
for `connect.sidecar_image` and `connect.gateway_image` would be
ignored despite being set. This PR restores that functionality.
There was a missing layer of interpolation that needs to occur for
these parameters. Since Nomad 1.0 now supports dynamic envoy versioning
through the ${NOMAD_envoy_version} psuedo variable, we basically need
to first interpolate
${connect.sidecar_image} => envoyproxy/envoy:v${NOMAD_envoy_version}
then use Consul at runtime to resolve to a real image, e.g.
envoyproxy/envoy:v${NOMAD_envoy_version} => envoyproxy/envoy:v1.16.0
Of course, if the version of Consul is too old to provide an envoy
version preference, we then need to know to fallback to the old
version of envoy that we used before.
envoyproxy/envoy:v${NOMAD_envoy_version} => envoyproxy/envoy:v1.11.2@sha256:a7769160c9c1a55bb8d07a3b71ce5d64f72b1f665f10d81aa1581bc3cf850d09
Beyond that, we also need to continue to support jobs that set the
sidecar task themselves, e.g.
sidecar_task { config { image: "custom/envoy" } }
which itself could include teh pseudo envoy version variable.
* fix acl event creation
* allow way to access secretID without exposing it to stream
test that values are omitted
test event creation
test acl events
payloads are pointers
fix failing tests, do all security steps inside constructor
* increase time
* ignore empty tokens
* uncomment line
* changelog
* use full name for events
use evaluation and allocation instead of short name
* update api event stream package and shortnames
* update docs
* make sync; fix typo
* backwards compat not from 1.0.0-beta event stream api changes
* use api types instead of string
* rm backwards compat note that only changed between prereleases
* remove backwards incompat that only existed in prereleases
* upsertaclpolicies
* delete acl policies msgtype
* upsert acl policies msgtype
* delete acl tokens msgtype
* acl bootstrap msgtype
wip unsubscribe on token delete
test that subscriptions are closed after an ACL token has been deleted
Start writing policyupdated test
* update test to use before/after policy
* add SubscribeWithACLCheck to run acl checks on subscribe
* update rpc endpoint to use broker acl check
* Add and use subscriptions.closeSubscriptionFunc
This fixes the issue of not being able to defer unlocking the mutex on
the event broker in the for loop.
handle acl policy updates
* rpc endpoint test for terminating acl change
* add comments
Co-authored-by: Kris Hicks <khicks@hashicorp.com>
* Remove Managed Sinks from Nomad
Managed Sinks were a beta feature in Nomad 1.0-beta2. During the beta
period it was determined that this was not a scalable approach to
support community and third party sinks.
* update comment
* changelog
Before, upstreams could only be defined using the default datacenter.
Now, the `datacenter` field can be set in a connect upstream definition,
informing consul of the desire for an instance of the upstream service
in the specified datacenter. The field is optional and continues to
default to the local datacenter.
Closes#8964
The CSIVolume struct "denormalizes" allocations when it's first queried from
the state store. The CSIVolumeByID method on the state store copies the volume
before denormalizing so that we don't end up with unexpected changes. The
copying has some subtle bugs that meant that Allocations (as well as
Topologies and MountOptions) were not getting copied when expected.
Also, ensure we never write allocations attached to volumes to the state store
during claims.
This PR adds the ability to set HTTP headers when downloading
an artifact from an `http` or `https` resource.
The implementation in `go-getter` is such that a new `HTTPGetter`
must be created for each artifact that sets headers (as opposed
to conveniently setting headers per-request). This PR maintains
the memoization of the default Getter objects, creating new ones
only for artifacts where headers are set.
Closes#9306
The unpublish workflow requires that we know the mode (RW vs RO) if we want to
unpublish the node. Update the hook and the Unpublish RPC so that we mark the
claim for release in a new state but leave the mode alone. This fixes a bug
where RO claims were failing node unpublish.
The core job GC doesn't know the mode, but we don't need it for that workflow,
so add a mode specifically for GC; the volumewatcher uses this as a sentinel
to check whether claims (with their specific RW vs RO modes) need to be claimed.
* Improve managed sink run loop and reloading
resetCh no longer needed
length of buffer equal to count of items, not count of events in each item
update equality fn name, pr feedback
clean up sink manager sink creation
* update test to reflect changes
* bad editor find and replace
* pr feedback
state store: call-out to generic update of job recommendations from job update method
recommendations API work, and http endpoint errors for OSS
support for scaling polices in task block of job spec
add query filters for ScalingPolicy list endpoint
command: nomad scaling policy list: added -job and -type
* Process to send events to configured sinks
This PR adds a SinkManager to a server which is responsible for managing
managed sinks. Managed sinks subscribe to the event broker and send
events to a sink writer (webhook). When changes to the eventstore are
made the sinkmanager and managed sink are responsible for reloading or
starting a new managed sink.
* periodically check in sink progress to raft
Save progress on the last successfully sent index to raft. This allows a
managed sink to resume close to where it left off in the event of a lost
server or leadership change
dereference eventsink so we can accurately use the watchch
When using a pointer to eventsink struct it was updated immediately and our reload logic would not trigger
* network sink rpc/api plumbing
state store methods and restore
upsert sink test
get sink
delete sink
event sink list and tests
go generate new msg types
validate sink on upsert
* go generate
* consul: advertise cni and multi host interface addresses
* structs: add service/check address_mode validation
* ar/groupservices: fetch networkstatus at hook runtime
* ar/groupservice: nil check network status getter before calling
* consul: comment network status can be nil
The MaxQueryTime value used in QueryOptions.HasTimedOut() can be set to
an invalid value that would throw off how RPC requests are retried.
This fix uses the same logic that enforces the MaxQueryTime bounds in the
blockingRPC() call.
properly wire up durable event count
move newline responsibility
moves newline creation from NDJson to the http handler, json stream only encodes and sends now
ignore snapshot restore if broker is disabled
enable dev mode to access event steam without acl
use mapping instead of switch
use pointers for config sizes, remove unused ttl, simplify closed conn logic
Fixes#9017
The ?resources=true query parameter includes resources in the object
stub listings. Specifically:
- For `/v1/nodes?resources=true` both the `NodeResources` and
`ReservedResources` field are included.
- For `/v1/allocations?resources=true` the `AllocatedResources` field is
included.
The ?task_states=false query parameter removes TaskStates from
/v1/allocations responses. (By default TaskStates are included.)
* Node Drain events and Node Events (#8980)
Deployment status updates
handle deployment status updates (paused, failed, resume)
deployment alloc health
generate events from apply plan result
txn err check, slim down deployment event
one ndjson line per index
* consolidate down to node event + type
* fix UpdateDeploymentAllocHealth test invocations
* fix test
This Commit adds an /v1/events/stream endpoint to stream events from.
The stream framer has been updated to include a SendFull method which
does not fragment the data between multiple frames. This essentially
treats the stream framer as a envelope to adhere to the stream framer
interface in the UI.
If the `encode` query parameter is omitted events will be streamed as
newline delimted JSON.
As newer versions of Consul are released, the minimum version of Envoy
it supports as a sidecar proxy also gets bumped. Starting with the upcoming
Consul v1.9.X series, Envoy v1.11.X will no longer be supported. Current
versions of Nomad hardcode a version of Envoy v1.11.2 to be used as the
default implementation of Connect sidecar proxy.
This PR introduces a change such that each Nomad Client will query its
local Consul for a list of Envoy proxies that it supports (https://github.com/hashicorp/consul/pull/8545)
and then launch the Connect sidecar proxy task using the latest supported version
of Envoy. If the `SupportedProxies` API component is not available from
Consul, Nomad will fallback to the old version of Envoy supported by old
versions of Consul.
Setting the meta configuration option `meta.connect.sidecar_image` or
setting the `connect.sidecar_task` stanza will take precedence as is
the current behavior for sidecar proxies.
Setting the meta configuration option `meta.connect.gateway_image`
will take precedence as is the current behavior for connect gateways.
`meta.connect.sidecar_image` and `meta.connect.gateway_image` may make
use of the special `${NOMAD_envoy_version}` variable interpolation, which
resolves to the newest version of Envoy supported by the Consul agent.
Addresses #8585#7665
Volumes using attachment mode `file-system` use the CSI filesystem API when
they're mounted, and can be passed mount options. But `block-device` mode
volumes don't have this option. When RPCs are made to plugins, we are silently
dropping the mount options we don't expect to see, but this results in a poor
operator experience when the mount options aren't honored. This changeset
makes passing mount options to a `block-device` volume a validation error.
Fixes a bug where CSI volumes with the `MULTI_NODE_MULTI_WRITER` access mode
were using the same logic as `MULTI_NODE_SINGLE_WRITER` to determine whether
the volume had writer claims available for scheduling.
Extends CSI claim endpoint test to exercise multi-reader and make sure `WriteFreeClaims`
is exercised for multi-writer in feasibility test.
This PR fixes a long standing bug where submitting jobs with changes
to connect services would not trigger updates as expected. Previously,
service blocks were not considered as sources of destructive updates
since they could be synced with consul non-destructively. With Connect,
task group services that have changes to their connect block or to
the service port should be destructive, since the network plumbing of
the alloc is going to need updating.
Fixes#8596#7991
Non-destructive half in #7192
Since CPU resources are usually a soft limit it is desirable to allow
setting it as low as possible to allow tasks to run only in "idle" time.
Setting it to 0 is still not allowed to avoid potential unintentional
side effects with allowing a zero value. While there may not be any side
effects this commit attempts to minimize risk by avoiding the issue.
This does *not* change the defaults.
When defining a script-check in a group-level service, Nomad needs to
know which task is associated with the check so that it can use the
correct task driver to execute the check.
This PR fixes two bugs:
1) validate service.task or service.check.task is configured
2) make service.check.task inherit service.task if it is itself unset
Fixes#8952
The current implementation measures RPC request timeout only against
config.RPCHoldTimeout, which is fine for non-blocking requests but will
almost surely be exceeded by long-poll requests that block for minutes
at a time.
This adds an HasTimedOut method on the RPCInfo interface that takes into
account whether the request is blocking, its maximum wait time, and the
RPCHoldTimeout.
Fix CSIMountOptions.Copy() and VolumeRequest.Copy() where they
accidentally returned a reference to self rather than a deep copy.
`&(*ref)` in Golang apparently equivalent to plain `&ref`.
The initial implementation of global job stop for MRD looped over all the
regions in the CLI for expedience. This changeset includes the OSS parts of
moving this into the RPC layer so that API consumers don't have to implement
this logic themselves.
Multiregion deployments use the `NomadTokenID` to allow the deploymentwatcher
to send RPCs between regions with the original submitter's ACL token. This ID
should be filtered from diffs so that it doesn't cause a difference for
purposes of job plans.
When consul.allow_unauthenticated is set to false, the job_endpoint hook validates
that a `-consul-token` is provided and validates the token against the privileges
inherent to a Consul Service Identity policy for all the Connect enabled services
defined in the job.
Before, the check was assuming the service was of type sidecar-proxy. This fixes the
check to use the type of the task so we can distinguish between the different connect
types.
This PR adds initial support for running Consul Connect Ingress Gateways (CIGs) in Nomad. These gateways are declared as part of a task group level service definition within the connect stanza.
```hcl
service {
connect {
gateway {
proxy {
// envoy proxy configuration
}
ingress {
// ingress-gateway configuration entry
}
}
}
}
```
A gateway can be run in `bridge` or `host` networking mode, with the caveat that host networking necessitates manually specifying the Envoy admin listener (which cannot be disabled) via the service port value.
Currently Envoy is the only supported gateway implementation in Consul, and Nomad only supports running Envoy as a gateway using the docker driver.
Aims to address #8294 and tangentially #8647
This change fixes a bug where lost/failed allocations are replaced by
allocations with the latest versions, even if the version hasn't been
promoted yet.
Now, when generating a plan for lost/failed allocations, the scheduler
first checks if the current deployment is in Canary stage, and if so, it
ensures that any lost/failed allocations is replaced one with the latest
promoted version instead.
This change adds the ability to set the fields `success_before_passing` and
`failures_before_critical` on Consul service check definitions. This is a
feature added to Consul v1.7.0 and later.
https://www.consul.io/docs/agent/checks#success-failures-before-passing-critical
Nomad doesn't do much besides pass the fields through to Consul.
Fixes#6913
When the client-side actions of a CSI client RPC succeed but we get
disconnected during the RPC or we fail to checkpoint the claim state, we want
to be able to retry the client RPC without getting blocked by the client-side
state (ex. mount points) already having been cleaned up in previous calls.
adds in oss components to support enterprise multi-vault namespace feature
upgrade specific doc on vault multi-namespaces
vault docs
update test to reflect new error
* nomad/structs/structs: add to Job.Validate
* Update nomad/structs/structs.go
Co-authored-by: Mahmood Ali <mahmood@hashicorp.com>
* nomad/structs/structs: match error strings to the config file
* nomad/structs/structs_test: clarify the test a bit
* nomad/structs/structs_test: typo in the test error comparison
Co-authored-by: Mahmood Ali <mahmood@hashicorp.com>
This fixes a bug where jobs may get "stuck" unprocessed that
dispropotionately affect periodic jobs around leadership transitions.
When registering a job, the job registration and the eval to process it
get applied to raft as two separate transactions; if the job
registration succeeds but eval application fails, the job may remain
unprocessed. Operators may detect such failure, when submitting a job
update and get a 500 error code, and they could retry; periodic jobs
failures are more likely to go unnoticed, and no further periodic
invocations will be processed until an operator force evaluation.
This fixes the issue by ensuring that the job registration and eval
application get persisted and processed atomically in the same raft log
entry.
Also, applies the same change to ensure atomicity in job deregistration.
Backward Compatibility
We must maintain compatibility in two scenarios: mixed clusters where a
leader can handle atomic updates but followers cannot, and a recent
cluster processes old log entries from legacy or mixed cluster mode.
To handle this constraints: ensure that the leader continue to emit the
Evaluation log entry until all servers have upgraded; also, when
processing raft logs, the servers honor evaluations found in both spots,
the Eval in job (de-)registration and the eval update entries.
When an updated server sees mix-mode behavior where an eval is inserted
into the raft log twice, it ignores the second instance.
I made one compromise in consistency in the mixed-mode scenario: servers
may disagree on the eval.CreateIndex value: the leader and updated
servers will report the job registration index while old servers will
report the index of the eval update log entry. This discripency doesn't
seem to be material - it's the eval.JobModifyIndex that matters.
Deployments should wait until kicked off by `Job.Register` so that we can
assert that all regions have a scheduled deployment before starting any
region. This changeset includes the OSS fixes to support the ENT work.
`IsMultiregionStarter` has no more callers in OSS, so remove it here.
It's supposed to be possible for a region not to have `datacenters` set so
that it can use the job's `datacenters` field. This requires that operators
use the same DC name across multiple regions, but that's the default client
configuration.
Before, the service definition for a Connect Native service would always
require setting the `service.task` parameter. Now, that parameter is
automatically inferred when there is only one task in the task group.
Fixes#8274
The multiregion plan diffs swap the old and new versions for each region when
they're edited (rather than added/removed). The `multiregionRegionDiff`
function call incorrectly reversed its arguments for existing regions.
* ar: support opting into binding host ports to default network IP
* fix config plumbing
* plumb node address into network resource
* struct: only handle network resource upgrade path once
* made api.Scaling.Max a pointer, so we can detect (and complain) when it is neglected
* added checks to HCL parsing that it is present
* when Scaling.Max is absent/invalid, don't return extraneous error messages during validation
* tweak to multiregion handling to ensure that the count is valid on the interpolated regional jobs
resolves#8355
* command/agent/host: collect host data, multi platform
* nomad/structs/structs: new HostDataRequest/Response
* client/agent_endpoint: add RPC endpoint
* command/agent/agent_endpoint: add Host
* api/agent: add the Host endpoint
* nomad/client_agent_endpoint: add Agent Host with forwarding
* nomad/client_agent_endpoint: use findClientConn
This changes forwardMonitorClient and forwardProfileClient to use
findClientConn, which was cribbed from the common parts of those
funcs.
* command/debug: call agent hosts
* command/agent/host: eliminate calling external programs
The `nomad volume deregister` command currently returns an error if the volume
has any claims, but in cases where the claims can't be dropped because of
plugin errors, providing a `-force` flag gives the operator an escape hatch.
If the volume has no allocations or if they are all terminal, this flag
deletes the volume from the state store, immediately and implicitly dropping
all claims without further CSI RPCs. Note that this will not also
unmount/detach the volume, which we'll make the responsibility of a separate
`nomad volume detach` command.
This fixes a bug where a batch allocation fails to complete if it has
sidecars.
If the only remaining running tasks in an allocations are sidecars - we
must kill them and mark the allocation as complete.
The scheduler returns a very strange error if it detects a port number
out of range. If these would somehow make it to the client they would
overflow when converted to an int32 and could cause conflicts.
This PR adds the capability of running Connect Native Tasks on Nomad,
particularly when TLS and ACLs are enabled on Consul.
The `connect` stanza now includes a `native` parameter, which can be
set to the name of task that backs the Connect Native Consul service.
There is a new Client configuration parameter for the `consul` stanza
called `share_ssl`. Like `allow_unauthenticated` the default value is
true, but recommended to be disabled in production environments. When
enabled, the Nomad Client's Consul TLS information is shared with
Connect Native tasks through the normal Consul environment variables.
This does NOT include auth or token information.
If Consul ACLs are enabled, Service Identity Tokens are automatically
and injected into the Connect Native task through the CONSUL_HTTP_TOKEN
environment variable.
Any of the automatically set environment variables can be overridden by
the Connect Native task using the `env` stanza.
Fixes#6083
If `max_parallel` is not set, all regions should begin in a `running` state
rather than a `pending` state. Otherwise the first region is set to `running`
and then all the remaining regions once it enters `blocked. That behavior is
technically correct in that we have at most `max_parallel` regions running,
but definitely not what a user expects.
In multiregion deployments when ACLs are enabled, the deploymentwatcher needs
an appropriately scoped ACL token with the same `submit-job` rights as the
user who submitted it. The token will already be replicated, so store the
accessor ID so that it can be retrieved by the leader.
The `paused` state is used as an operator safety mechanism, so that they can
debug a deployment or halt one that's causing a wider failure. By using the
`paused` state as the first state of a multiregion deployment, we risked
resuming an intentionally operator-paused deployment because of activity in a
peer region.
This changeset replaces the use of the `paused` state with a `pending` state,
and provides a `Deployment.Run` internal RPC to replace the use of the
`Deployment.Pause` (resume) RPC we were using in `deploymentwatcher`.
* `nextRegion` should take status parameter
* thread Deployment/Job RPCs thru `nextRegion`
* add `nextRegion` calls to `deploymentwatcher`
* use a better description for paused for peer
Integration points for multiregion jobs to be registered in the enterprise
version of Nomad:
* hook in `Job.Register` for enterprise to send job to peer regions
* remove monitoring from `nomad job run` and `nomad job stop` for multiregion jobs
