This change deflakes TestTaskTemplateManager_BlockedEvents test, because
it is expecting a number of events without accounting for transitional
state.
The test TestTaskTemplateManager_BlockedEvents attempts to ensure that a
template rendering emits blocked events for missing template ksys.
It works by setting a template that requires keys 0,1,2,3,4 and then
eventually sets keys 0,1,2,3 and ensures that we get a final event indicating
that keys 3 and 4 are still missing.
The test waits to get a blocked event for the final state, but it can
fail if receives a blocked event for a transitional state (e.g. one
reporting 2,3,4,5 are missing).
This fixes the test by ensuring that it waits until the final message
before assertion.
Also, it clarifies the intent of the test with stricter assertions and
additional comments.
Makes it possible to run Linux Containers On Windows with Nomad alongside Windows Containers. Fingerprint prevents only to run Nomad in Windows 10 with Linux Containers
In order to minimize this change while keeping a simple version of the
behavior, we set `lastOk` to the current time less the intial server
connection timeout. If the client starts and never contacts the
server, it will stop all configured tasks after the initial server
connection grace period, on the assumption that we've been out of
touch longer than any configured `stop_after_client_disconnect`.
The more complex state behavior might be justified later, but we
should learn about failure modes first.
- track lastHeartbeat, the client local time of the last successful
heartbeat round trip
- track allocations with `stop_after_client_disconnect` configured
- trigger allocation destroy (which handles cleanup)
- restore heartbeat/killable allocs tracking when allocs are recovered from disk
- on client restart, stop those allocs after a grace period if the
servers are still partioned
During MVP development, we reduced the timeout for controller plugins
to avoid long hangs in GC workers. But now that this work has been
moved to the volume watcher, we can restore the original timeout which
is better suited for the characteristic timescales of some cloud
provider APIs and better matches the behavior of k8s.
Fixes#7681
The current behavior of the CPU fingerprinter in AWS is that it
reads the **current** speed from `/proc/cpuinfo` (`CPU MHz` field).
This is because the max CPU frequency is not available by reading
anything on the EC2 instance itself. Normally on Linux one would
look at e.g. `sys/devices/system/cpu/cpuN/cpufreq/cpuinfo_max_freq`
or perhaps parse the values from the `CPU max MHz` field in
`/proc/cpuinfo`, but those values are not available.
Furthermore, no metadata about the CPU is made available in the
EC2 metadata service.
https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/instancedata-data-categories.html
Since `go-psutil` cannot determine the max CPU speed it defaults to
the current CPU speed, which could be basically any number between
0 and the true max. This is particularly bad on large, powerful
reserved instances which often idle at ~800 MHz while Nomad does
its fingerprinting (typically IO bound), which Nomad then uses as
the max, which results in severe loss of available resources.
Since the CPU specification is unavailable programmatically (at least
not without sudo) use a best-effort lookup table. This table was
generated by going through every instance type in AWS documentation
and copy-pasting the numbers.
https://aws.amazon.com/ec2/instance-types/
This approach obviously is not ideal as future instance types will
need to be added as they are introduced to AWS. However, using the
table should only be an improvement over the status quo since right
now Nomad miscalculates available CPU resources on all instance types.
Use v1.1.5 of go-msgpack/codec/codecgen, so go-msgpack codecgen matches
the library version.
We branched off earlier to pick up
f51b518921
, but apparently that's not needed as we could customize the package via
`-c` argument.
Adds a `CSIVolumeClaim` type to be tracked as current and past claims
on a volume. Allows for a client RPC failure during node or controller
detachment without having to keep the allocation around after the
first garbage collection eval.
This changeset lays groundwork for moving the actual detachment RPCs
into a volume watching loop outside the GC eval.
task shutdown_delay will currently only run if there are registered
services for the task. This implementation detail isn't explicity stated
anywhere and is defined outside of the service stanza.
This change moves shutdown_delay to be evaluated after prekill hooks are
run, outside of any task runner hooks.
just use time.sleep
The `Job.Deregister` call will block on the client CSI controller RPCs
while the alloc still exists on the Nomad client node. So we need to
make the volume claim reaping async from the `Job.Deregister`. This
allows `nomad job stop` to return immediately. In order to make this
work, this changeset changes the volume GC so that the GC jobs are on a
by-volume basis rather than a by-job basis; we won't have to query
the (possibly deleted) job at the time of volume GC. We smuggle the
volume ID and whether it's a purge into the GC eval ID the same way we
smuggled the job ID previously.
The CSI plugins uses the external volume ID for all operations, but
the Client CSI RPCs uses the Nomad volume ID (human-friendly) for the
mount paths. Pass the External ID as an arg in the RPC call so that
the unpublish workflows have it without calling back to the server to
find the external ID.
The controller CSI plugins need the CSI node ID (or in other words,
the storage provider's view of node ID like the EC2 instance ID), not
the Nomad node ID, to determine how to detach the external volume.
If a volume-claiming alloc stops and the CSI Node plugin that serves
that alloc's volumes is missing, there's no way for the allocrunner
hook to send the `NodeUnpublish` and `NodeUnstage` RPCs.
This changeset addresses this issue with a redesign of the client-side
for CSI. Rather than unmounting in the alloc runner hook, the alloc
runner hook will simply exit. When the server gets the
`Node.UpdateAlloc` for the terminal allocation that had a volume claim,
it creates a volume claim GC job. This job will made client RPCs to a
new node plugin RPC endpoint, and only once that succeeds, move on to
making the client RPCs to the controller plugin. If the node plugin is
unavailable, the GC job will fail and be requeued.
Fixes#6594#6711#6714#7567
e2e testing is still TBD in #6502
Before, we only passed the Nomad agent's configured Consul HTTP
address onto the `consul connect envoy ...` bootstrap command.
This meant any Consul setup with TLS enabled would not work with
Nomad's Connect integration.
This change now sets CLI args and Environment Variables for
configuring TLS options for communicating with Consul when doing
the envoy bootstrap, as described in
https://www.consul.io/docs/commands/connect/envoy.html#usage
Enable configuration of HTTP and gRPC endpoints which should be exposed by
the Connect sidecar proxy. This changeset is the first "non-magical" pass
that lays the groundwork for enabling Consul service checks for tasks
running in a network namespace because they are Connect-enabled. The changes
here provide for full configuration of the
connect {
sidecar_service {
proxy {
expose {
paths = [{
path = <exposed endpoint>
protocol = <http or grpc>
local_path_port = <local endpoint port>
listener_port = <inbound mesh port>
}, ... ]
}
}
}
stanza. Everything from `expose` and below is new, and partially implements
the precedent set by Consul:
https://www.consul.io/docs/connect/registration/service-registration.html#expose-paths-configuration-reference
Combined with a task-group level network port-mapping in the form:
port "exposeExample" { to = -1 }
it is now possible to "punch a hole" through the network namespace
to a specific HTTP or gRPC path, with the anticipated use case of creating
Consul checks on Connect enabled services.
A future PR may introduce more automagic behavior, where we can do things like
1) auto-fill the 'expose.path.local_path_port' with the default value of the
'service.port' value for task-group level connect-enabled services.
2) automatically generate a port-mapping
3) enable an 'expose.checks' flag which automatically creates exposed endpoints
for every compatible consul service check (http/grpc checks on connect
enabled services).
* nomad/structs/structs: new NodeEventSubsystemCSI
* client/client: pass triggerNodeEvent in the CSIConfig
* client/pluginmanager/csimanager/instance: add eventer to instanceManager
* client/pluginmanager/csimanager/manager: pass triggerNodeEvent
* client/pluginmanager/csimanager/volume: node event on [un]mount
* nomad/structs/structs: use storage, not CSI
* client/pluginmanager/csimanager/volume: use storage, not CSI
* client/pluginmanager/csimanager/volume_test: eventer
* client/pluginmanager/csimanager/volume: event on error
* client/pluginmanager/csimanager/volume_test: check event on error
* command/node_status: remove an extra space in event detail format
* client/pluginmanager/csimanager/volume: use snake_case for details
* client/pluginmanager/csimanager/volume_test: snake_case details
The CSI Specification defines various gRPC Errors and how they may be retried. After auditing all our CSI RPC calls in #6863, this changeset:
* adds retries and backoffs to the where they were needed but not implemented
* annotates those CSI RPCs that do not need retries so that we don't wonder whether it's been left off accidentally
* added a timeout and cancellation context to the `Probe` call, which didn't have one.
The test inserts an alloc in the server state, but expect the client to
start the alloc runner for it almost immediately.
Here, we add a retry loop to check that the client start all expected
alloc runners eventually.
Fix a regression where we accidentally started treating non-AWS
environments as AWS environments, resulting in bad networking settings.
Two factors some at play:
First, in [1], we accidentally switched the ultimate AWS test from
checking `ami-id` to `instance-id`. This means that nomad started
treating more environments as AWS; e.g. Hetzner implements `instance-id`
but not `ami-id`.
Second, some of these environments return empty values instead of
errors! Hetzner returns empty 200 response for `local-ipv4`, resulting
into bad networking configuration.
This change fix the situation by restoring the check to `ami-id` and
ensuring that we only set network configuration when the ip address is
not-empty. Also, be more defensive around response whitespace input.
[1] https://github.com/hashicorp/nomad/pull/6779
Add mount_options to both the volume definition on registration and to the volume block in the group where the volume is requested. If both are specified, the options provided in the request replace the options defined in the volume. They get passed to the NodePublishVolume, which causes the node plugin to actually mount the volume on the host.
Individual tasks just mount bind into the host mounted volume (unchanged behavior). An operator can mount the same volume with different options by specifying it twice in the group context.
closes#7007
* nomad/structs/volumes: add MountOptions to volume request
* jobspec/test-fixtures/basic.hcl: add mount_options to volume block
* jobspec/parse_test: add expected MountOptions
* api/tasks: add mount_options
* jobspec/parse_group: use hcl decode not mapstructure, mount_options
* client/allocrunner/csi_hook: pass MountOptions through
client/allocrunner/csi_hook: add a VolumeMountOptions
client/allocrunner/csi_hook: drop Options
client/allocrunner/csi_hook: use the structs options
* client/pluginmanager/csimanager/interface: UsageOptions.MountOptions
* client/pluginmanager/csimanager/volume: pass MountOptions in capabilities
* plugins/csi/plugin: remove todo 7007 comment
* nomad/structs/csi: MountOptions
* api/csi: add options to the api for parsing, match structs
* plugins/csi/plugin: move VolumeMountOptions to structs
* api/csi: use specific type for mount_options
* client/allocrunner/csi_hook: merge MountOptions here
* rename CSIOptions to CSIMountOptions
* client/allocrunner/csi_hook
* client/pluginmanager/csimanager/volume
* nomad/structs/csi
* plugins/csi/fake/client: add PrevVolumeCapability
* plugins/csi/plugin
* client/pluginmanager/csimanager/volume_test: remove debugging
* client/pluginmanager/csimanager/volume: fix odd merging logic
* api: rename CSIOptions -> CSIMountOptions
* nomad/csi_endpoint: remove a 7007 comment
* command/alloc_status: show mount options in the volume list
* nomad/structs/csi: include MountOptions in the volume stub
* api/csi: add MountOptions to stub
* command/volume_status_csi: clean up csiVolMountOption, add it
* command/alloc_status: csiVolMountOption lives in volume_csi_status
* command/node_status: display mount flags
* nomad/structs/volumes: npe
* plugins/csi/plugin: npe in ToCSIRepresentation
* jobspec/parse_test: expand volume parse test cases
* command/agent/job_endpoint: ApiTgToStructsTG needs MountOptions
* command/volume_status_csi: copy paste error
* jobspec/test-fixtures/basic: hclfmt
* command/volume_status_csi: clean up csiVolMountOption
Run the plugin fingerprint one last time with a closed client during
instance manager shutdown. This will return quickly and will give us a
correctly-populated `PluginInfo` marked as unhealthy so the Nomad
client can update the server about plugin health.
Allow for faster updates to plugin status when allocations become
terminal by listening for register/deregister events from the dynamic
plugin registry (which in turn are triggered by the plugin supervisor
hook).
The deregistration function closures that we pass up to the CSI plugin
manager don't properly close over the name and type of the
registration, causing monolith-type plugins to deregister only one of
their two plugins on alloc shutdown. Rebind plugin supervisor
deregistration targets to fix that.
Includes log message and comment improvements
This changeset implements the remaining controller detach RPCs: server-to-client and client-to-controller. The tests also uncovered a bug in our RPC for claims which is fixed here; the volume claim RPC is used for both claiming and releasing a claim on a volume. We should only submit a controller publish RPC when the claim is new and not when it's being released.
In order to correctly fingerprint dynamic plugins on client restarts,
we need to persist a handle to the plugin (that is, connection info)
to the client state store.
The dynamic registry will sync automatically to the client state
whenever it receives a register/deregister call.
* nomad/structs/csi: new RemoteID() uses the ExternalID if set
* nomad/csi_endpoint: pass RemoteID to volume request types
* client/pluginmanager/csimanager/volume: pass RemoteID to NodePublishVolume
Fix some docstring typos and fix noisy log message during client restarts.
A log for the common case where the plugin socket isn't ready yet
isn't actionable by the operator so having it at info is just noise.
* client/allocrunner/csi_hook: tag errors
* nomad/client_csi_endpoint: tag errors
* nomad/client_rpc: remove an unnecessary error tag
* nomad/state/state_store: ControllerRequired fix intent
We use ControllerRequired to indicate that a volume should use the
publish/unpublish workflow, rather than that it has a controller. We
need to check both RequiresControllerPlugin and SupportsAttachDetach
from the fingerprint to check that.
* nomad/csi_endpoint: tag errors
* nomad/csi_endpoint_test: longer error messages, mock fingerprints
Derive a provider name and version for plugins (and the volumes that
use them) from the CSI identity API `GetPluginInfo`. Expose the vendor
name as `Provider` in the API and CLI commands.
* structs: CSIInfo include AllocID, CSIPlugins no Jobs
* state_store: eliminate plugin Jobs, delete an empty plugin
* nomad/structs/csi: detect empty plugins correctly
* client/allocrunner/taskrunner/plugin_supervisor_hook: option AllocID
* client/pluginmanager/csimanager/instance: allocID
* client/pluginmanager/csimanager/fingerprint: set AllocID
* client/node_updater: split controller and node plugins
* api/csi: remove Jobs
The CSI Plugin API will map plugins to allocations, which allows
plugins to be defined by jobs in many configurations. In particular,
multiple plugins can be defined in the same job, and multiple jobs can
be used to define a single plugin.
Because we now map the allocation context directly from the node, it's
no longer necessary to track the jobs associated with a plugin
directly.
* nomad/csi_endpoint_test: CreateTestPlugin & register via fingerprint
* client/dynamicplugins: lift AllocID into the struct from Options
* api/csi_test: remove Jobs test
* nomad/structs/csi: CSIPlugins has an array of allocs
* nomad/state/state_store: implement CSIPluginDenormalize
* nomad/state/state_store: CSIPluginDenormalize npe on missing alloc
* nomad/csi_endpoint_test: defer deleteNodes for clarity
* api/csi_test: disable this test awaiting mocks:
https://github.com/hashicorp/nomad/issues/7123
Currently the handling of CSINode RPCs does not correctly handle
forwarding RPCs to Nodes.
This commit fixes this by introducing a shim RPC
(nomad/client_csi_enpdoint) that will correctly forward the request to
the owning node, or submit the RPC to the client.
In the process it also cleans up handling a little bit by adding the
`CSIControllerQuery` embeded struct for required forwarding state.
The CSIControllerQuery embeding the requirement of a `PluginID` also
means we could move node targetting into the shim RPC if wanted in the
future.
CSI Plugins that manage devices need not just access to the CSI
directory, but also to manage devices inside `/dev`.
This commit introduces a `/dev:/dev` mount to the container so that they
may do so.
This commit is the initial implementation of claiming volumes from the
server and passes through any publishContext information as appropriate.
There's nothing too fancy here.
The CSI Spec requires us to attach and stage volumes based on different
types of usage information when it may effect how they are bound. Here
we pass through some basic usage options in the CSI Hook (specifically
the volume aliases ReadOnly field), and the attachment/access mode from
the volume. We pass the attachment/access mode seperately from the
volume as it simplifies some handling and doesn't necessarily force
every attachment to use the same mode should more be supported (I.e if
we let each `volume "foo" {}` specify an override in the future).
This commit introduces initial support for unmounting csi volumes.
It takes a relatively simplistic approach to performing
NodeUnpublishVolume calls, optimising for cleaning up any leftover state
rather than terminating early in the case of errors.
This is because it happens during an allocation's shutdown flow and may
not always have a corresponding call to `NodePublishVolume` that
succeeded.
This commit implements support for creating driver mounts for CSI
Volumes.
It works by fetching the created mounts from the allocation resources
and then iterates through the volume requests, creating driver mount
configs as required.
It's a little bit messy primarily because there's _so_ much terminology
overlap and it's a bit difficult to follow.
This commit is an initial (read: janky) approach to forwarding state
from an allocrunner hook to a taskrunner using a similar `hookResources`
approach that tr's use internally.
It should eventually probably be replaced with something a little bit
more message based, but for things that only come from pre-run hooks,
and don't change, it's probably fine for now.
This commit introduces the first stage of volume mounting for an
allocation. The csimanager.VolumeMounter interface manages the blocking
and actual minutia of the CSI implementation allowing this hook to do
the minimal work of volume retrieval and creating mount info.
In the future the `CSIVolume.Get` request should be replaced by
`CSIVolume.Claim(Batch?)` to minimize the number of RPCs and to handle
external triggering of a ControllerPublishVolume request as required.
We also need to ensure that if pre-run hooks fail, we still get a full
unwinding of any publish and staged volumes to ensure that there are no hanging
references to volumes. That is not handled in this commit.
As part of introducing support for CSI, AllocRunner hooks need to be
able to communicate with Nomad Servers for validation of and interaction
with storage volumes. Here we create a small RPCer interface and pass
the client (rpc client) to the AR in preparation for making these RPCs.
This changeset implements the minimal structs on the client-side we
need to compile the work-in-progress implementation of the
server-to-controller RPCs. It doesn't include implementing the
`ClientCSI.DettachVolume` RPC on the client.
When providing paths to plugins, the path needs to be in the scope of
the plugins container, rather than that of the host.
Here we enable that by providing the mount point through the plugin
registration and then use it when constructing request target paths.
This commit introduces support for staging volumes when a plugin
implements the STAGE_UNSTAGE_VOLUME capability.
See the following for further reference material:
4731db0e0b/spec.md (nodestagevolume)
This commit adds helpers that create and validate the staging directory
for a given volume. It is currently missing usage options as the
interfaces are not yet in place for those.
The staging directory is only required when a volume has the
STAGE_UNSTAGE Volume capability and has to live within the plugin root
as the plugin needs to be able to create mounts inside it from within
the container.
This changeset is some pre-requisite boilerplate that is required for
introducing CSI volume management for client nodes.
It extracts out fingerprinting logic from the csi instance manager.
This change is to facilitate reusing the csimanager to also manage the
node-local CSI functionality, as it is the easiest place for us to
guaruntee health checking and to provide additional visibility into the
running operations through the fingerprinter mechanism and goroutine.
It also introduces the VolumeMounter interface that will be used to
manage staging/publishing unstaging/unpublishing of volumes on the host.
This commit introduces a new set of endpoints to a Nomad Client:
ClientCSI.
ClientCSI is responsible for mediating requests from a Nomad Server to
a CSI Plugin running on a Nomad Client. It should only really be used to
make controller RPCs.
This changeset implements the initial registration and fingerprinting
of CSI Plugins as part of #5378. At a high level, it introduces the
following:
* A `csi_plugin` stanza as part of a Nomad task configuration, to
allow a task to expose that it is a plugin.
* A new task runner hook: `csi_plugin_supervisor`. This hook does two
things. When the `csi_plugin` stanza is detected, it will
automatically configure the plugin task to receive bidirectional
mounts to the CSI intermediary directory. At runtime, it will then
perform an initial heartbeat of the plugin and handle submitting it to
the new `dynamicplugins.Registry` for further use by the client, and
then run a lightweight heartbeat loop that will emit task events
when health changes.
* The `dynamicplugins.Registry` for handling plugins that run
as Nomad tasks, in contrast to the existing catalog that requires
`go-plugin` type plugins and to know the plugin configuration in
advance.
* The `csimanager` which fingerprints CSI plugins, in a similar way to
`drivermanager` and `devicemanager`. It currently only fingerprints
the NodeID from the plugin, and assumes that all plugins are
monolithic.
Missing features
* We do not use the live updates of the `dynamicplugin` registry in
the `csimanager` yet.
* We do not deregister the plugins from the client when they shutdown
yet, they just become indefinitely marked as unhealthy. This is
deliberate until we figure out how we should manage deploying new
versions of plugins/transitioning them.
allow oss to parse sink duration
clean up audit sink parsing
ent eventer config reload
fix typo
SetEnabled to eventer interface
client acl test
rm dead code
fix failing test
In service jobs, lifecycles non-sidecar task tweak health logic a bit:
they may terminate successfully without impacting alloc health, but fail
the alloc if they fail.
Sidecars should be treated just like a normal task.
Fixes a bug where an allocation is considered healthy if some of the
tasks are being restarted and as such, their checks aren't tracked by
consul agent client.
Here, we fix the immediate case by ensuring that an alloc is healthy
only if tasks are running and the registered checks at the time are
healthy.
Previously, health tracker tracked task "health" independently from
checks and leads to problems when a task restarts. Consider the
following series of events:
1. all tasks start running -> `tracker.tasksHealthy` is true
2. one task has unhealthy checks and get restarted
3. remaining checks are healthy -> `tracker.checksHealthy` is true
4. propagate health status now that `tracker.tasksHealthy` and
`tracker.checksHealthy`.
This change ensures that we accurately use the latest status of tasks
and checks regardless of their status changes.
Also, ensures that we only consider check health after tasks are
considered healthy, otherwise we risk trusting incomplete checks.
This approach accomodates task dependencies well. Service jobs can have
prestart short-lived tasks that will terminate before main process runs.
These dead tasks that complete successfully will not negate health
status.
This change updates tests to honor `BootstrapExpect` exclusively when
forming test clusters and removes test only knobs, e.g.
`config.DevDisableBootstrap`.
Background:
Test cluster creation is fragile. Test servers don't follow the
BootstapExpected route like production clusters. Instead they start as
single node clusters and then get rejoin and may risk causing brain
split or other test flakiness.
The test framework expose few knobs to control those (e.g.
`config.DevDisableBootstrap` and `config.Bootstrap`) that control
whether a server should bootstrap the cluster. These flags are
confusing and it's unclear when to use: their usage in multi-node
cluster isn't properly documented. Furthermore, they have some bad
side-effects as they don't control Raft library: If
`config.DevDisableBootstrap` is true, the test server may not
immediately attempt to bootstrap a cluster, but after an election
timeout (~50ms), Raft may force a leadership election and win it (with
only one vote) and cause a split brain.
The knobs are also confusing as Bootstrap is an overloaded term. In
BootstrapExpect, we refer to bootstrapping the cluster only after N
servers are connected. But in tests and the knobs above, it refers to
whether the server is a single node cluster and shouldn't wait for any
other server.
Changes:
This commit makes two changes:
First, it relies on `BootstrapExpected` instead of `Bootstrap` and/or
`DevMode` flags. This change is relatively trivial.
Introduce a `Bootstrapped` flag to track if the cluster is bootstrapped.
This allows us to keep `BootstrapExpected` immutable. Previously, the
flag was a config value but it gets set to 0 after cluster bootstrap
completes.
Consul CLI uses CONSUL_HTTP_TOKEN, so Nomad should use the same.
Note that consul-template uses CONSUL_TOKEN, which Nomad also uses,
so be careful to preserve any reference to that in the consul-template
context.
Consul provides a feature of Service Definitions where the tags
associated with a service can be modified through the Catalog API,
overriding the value(s) configured in the agent's service configuration.
To enable this feature, the flag enable_tag_override must be configured
in the service definition.
Previously, Nomad did not allow configuring this flag, and thus the default
value of false was used. Now, it is configurable.
Because Nomad itself acts as a state machine around the the service definitions
of the tasks it manages, it's worth describing what happens when this feature
is enabled and why.
Consider the basic case where there is no Nomad, and your service is provided
to consul as a boring JSON file. The ultimate source of truth for the definition
of that service is the file, and is stored in the agent. Later, Consul performs
"anti-entropy" which synchronizes the Catalog (stored only the leaders). Then
with enable_tag_override=true, the tags field is available for "external"
modification through the Catalog API (rather than directly configuring the
service definition file, or using the Agent API). The important observation
is that if the service definition ever changes (i.e. the file is changed &
config reloaded OR the Agent API is used to modify the service), those
"external" tag values are thrown away, and the new service definition is
once again the source of truth.
In the Nomad case, Nomad itself is the source of truth over the Agent in
the same way the JSON file was the source of truth in the example above.
That means any time Nomad sets a new service definition, any externally
configured tags are going to be replaced. When does this happen? Only on
major lifecycle events, for example when a task is modified because of an
updated job spec from the 'nomad job run <existing>' command. Otherwise,
Nomad's periodic re-sync's with Consul will now no longer try to restore
the externally modified tag values (as long as enable_tag_override=true).
Fixes#2057
Re-orient the management of the tr.kill to happen in the parent of
the spawned goroutine that is doing the actual token derivation. This
makes the code a little more straightforward, making it easier to
reason about not leaking the worker goroutine.
The derivation of an SI token needs to be safegaurded by a context
timeout, otherwise an unresponsive Consul could cause the siHook
to block forever on Prestart.
Apply smaller suggestions like doc strings, variable names, etc.
Co-Authored-By: Nick Ethier <nethier@hashicorp.com>
Co-Authored-By: Michael Schurter <mschurter@hashicorp.com>
The TestEnvoyBootstrapHook_maybeLoadSIToken test case only works when
running as a non-priveleged user, since it deliberately tries to read
an un-readable file to simulate a failure loading the SI token file.
Was thinking about using the testing pattern where you create executable
shell scripts as test resources which "mock" the process a bit of code
is meant to fork+exec. Turns out that wasn't really necessary in this case.
When creating the envoy bootstrap configuration, we should append
the "-token=<token>" argument in the case where the sidsHook placed
the token in the secrets directory.
Nomad jobs may be configured with a TaskGroup which contains a Service
definition that is Consul Connect enabled. These service definitions end
up establishing a Consul Connect Proxy Task (e.g. envoy, by default). In
the case where Consul ACLs are enabled, a Service Identity token is required
for these tasks to run & connect, etc. This changeset enables the Nomad Server
to recieve RPC requests for the derivation of SI tokens on behalf of instances
of Consul Connect using Tasks. Those tokens are then relayed back to the
requesting Client, which then injects the tokens in the secrets directory of
the Task.
When a job is configured with Consul Connect aware tasks (i.e. sidecar),
the Nomad Client should be able to request from Consul (through Nomad Server)
Service Identity tokens specific to those tasks.
There is a case for always canonicalizing alloc.Job field when
canonicalizing the alloc. I'm less certain of implications though, and
the job canonicalize hasn't changed for a long time.
Here, we special case client restore from database as it's probably the
most relevant part. When receiving an alloc from RPC, the data should
be fresh enough.
Passes in agent enable_debug config to nomad server and client configs.
This allows for rpc endpoints to have more granular control if they
should be enabled or not in combination with ACLs.
enable debug on client test
Now that alloc.Canonicalize() is called in all alloc sources in the
client (i.e. on state restore and RPC fetching), we no longer need to
check alloc.TaskResources.
alloc.AllocatedResources is always non-nil through alloc runner.
Though, early on, we check for alloc validity, so NewTaskRunner and
TaskEnv must still check. `TestClient_AddAllocError` test validates
that behavior.
This commit ensures that Alloc.AllocatedResources is properly populated
when read from persistence stores (namely Raft and client state store).
The alloc struct may have been written previously by an arbitrary old
version that may only populate Alloc.TaskResources.
In 0.10.2 (specifically 387b016) we added interpolation to group
service blocks and centralized the logic for task environment
interpolation. This wasn't also added to script checks, which caused a
regression where the IDs for script checks for services w/
interpolated fields (ex. the service name) didn't match the service ID
that was registered with Consul.
This changeset calls the same taskenv interpolation logic during
`script_check` configuration, and adds tests to reduce the risk of
future regressions by comparing the IDs of service hook and the check hook.
copy struct values
ensure groupserviceHook implements RunnerPreKillhook
run deregister first
test that shutdown times are delayed
move magic number into variable
Previously, Nomad used hand rolled HTTP requests to interact with the
EC2 metadata API. Recently however, we switched to using the AWS SDK for
this fingerprinting.
The default behaviour of the AWS SDK is to perform retries with
exponential backoff when a request fails. This is problematic for Nomad,
because interacting with the EC2 API is in our client start path.
Here we revert to our pre-existing behaviour of not performing retries
in the fast path, as if the metadata service is unavailable, it's likely
that nomad is not running in AWS.
Copy the updated version of freeport (sdk/freeport), and tweak it for use
in Nomad tests. This means staying below port 10000 to avoid conflicts with
the lib/freeport that is still transitively used by the old version of
consul that we vendor. Also provide implementations to find ephemeral ports
of macOS and Windows environments.
Ports acquired through freeport are supposed to be returned to freeport,
which this change now also introduces. Many tests are modified to include
calls to a cleanup function for Server objects.
This should help quite a bit with some flakey tests, but not all of them.
Our port problems will not go away completely until we upgrade our vendor
version of consul. With Go modules, we'll probably do a 'replace' to swap
out other copies of freeport with the one now in 'nomad/helper/freeport'.
Operators commonly have docker logs aggregated using various tools and
don't need nomad to manage their docker logs. Worse, Nomad uses a
somewhat heavy docker api call to collect them and it seems to cause
problems when a client runs hundreds of log collections.
Here we add a knob to disable log aggregation completely for nomad.
When log collection is disabled, we avoid running logmon and
docker_logger for the docker tasks in this implementation.
The downside here is once disabled, `nomad logs ...` commands and API
no longer return logs and operators must corrolate alloc-ids with their
aggregated log info.
This is meant as a stop gap measure. Ideally, we'd follow up with at
least two changes:
First, we should optimize behavior when we can such that operators don't
need to disable docker log collection. Potentially by reverting to
using pre-0.9 syslog aggregation in linux environments, though with
different trade-offs.
Second, when/if logs are disabled, nomad logs endpoints should lookup
docker logs api on demand. This ensures that the cost of log collection
is paid sparingly.
Add an RPC timeout for logmon. In
https://github.com/hashicorp/nomad/issues/6461#issuecomment-559747758 ,
`logmonClient.Stop` locked up and indefinitely blocked the task runner
destroy operation.
This is an incremental improvement. We still need to follow up to
understand how we got to that state, and the full impact of locked-up
Stop and its link to pending allocations on restart.
Some code cleanup:
* Use a field for setting EC2 metadata instead of env-vars in testing;
but keep environment variables for backward compatibility reasons
* Update tests to use testify
TestClient_UpdateNodeFromFingerprintKeepsConfig checks a test node
network interface, which is hardcoded to `eth0` and is updated
asynchronously. This causes flakiness when eth0 isn't available.
Here, we hardcode the value to an arbitrary network interface.
When spinning a second client, ensure that it uses new driver
instances, rather than reuse the already shutdown unhealthy drivers from
first instance.
This speeds up tests significantly, but cutting ~50 seconds or so, the
timeout in NewClient until drivers fingerprints. They never do because
drivers were shutdown already.
TestClient_RestoreError is very slow, taking ~81 seconds.
It has few problematic patterns. It's unclear what it tests, it
simulates a failure condition where all state db lookup fails and
asserts that alloc fails. Though starting from
https://github.com/hashicorp/nomad/pull/6216 , we don't fail allocs in
that condition but rather restart them.
Also, the drivers used in second client `c2` are the same singleton
instances used in `c1` and already shutdown. We ought to start healthy
new driver instances.
* client: improve group service stanza interpolation and check_restart support
Interpolation can now be done on group service stanzas. Note that some task runtime specific information
that was previously available when the service was registered poststart of a task is no longer available.
The check_restart stanza for checks defined on group services will now properly restart the allocation upon
check failures if configured.
Adds new package that can be used by client and server RPC endpoints to
facilitate monitoring based off of a logger
clean up old code
small comment about write
rm old comment about minsize
rename to Monitor
Removes connection logic from monitor command
Keep connection logic in endpoints, use a channel to send results from
monitoring
use new multisink logger and interfaces
small test for dropped messages
update go-hclogger and update sink/intercept logger interfaces
makeAllocTaskServices did not do a nil check on AllocatedResources
which causes a panic when upgrading directly from 0.8 to 0.10. While
skipping 0.9 is not supported we intend to fix serious crashers caused
by such upgrades to prevent cluster outages.
I did a quick audit of the client package and everywhere else that
accesses AllocatedResources appears to be properly guarded by a nil
check.
At shutdown, driver manager context expires and the fingerprinting
channel closes. Thus it is undeterministic which clause of The select
statement gets executed, and we may keep retrying until the
`i.ctx.Done()` block is executed.
Here, we check always check ctx expiration before retrying again.
Fix a bug where a millicious user can access or manipulate an alloc in a
namespace they don't have access to. The allocation endpoints perform
ACL checks against the request namespace, not the allocation namespace,
and performs the allocation lookup independently from namespaces.
Here, we check that the requested can access the alloc namespace
regardless of the declared request namespace.
Ideally, we'd enforce that the declared request namespace matches
the actual allocation namespace. Unfortunately, we haven't documented
alloc endpoints as namespaced functions; we suspect starting to enforce
this will be very disruptive and inappropriate for a nomad point
release. As such, we maintain current behavior that doesn't require
passing the proper namespace in request. A future major release may
start enforcing checking declared namespace.
fixes https://github.com/hashicorp/nomad/issues/6382
The prestart hook for templates blocks while it resolves vault secrets.
If the secret is not found it continues to retry. If a task is shutdown
during this time, the prestart hook currently does not receive
shutdownCtxCancel, causing it to hang.
This PR joins the two contexts so either killCtx or shutdownCtx cancel
and stop the task.
In a job registration request, ensure that the request namespace "header" and job
namespace field match. This should be the case already in prod, as http
handlers ensures that the values match [1].
This mitigates bugs that exploit bugs where we may check a value but act
on another, resulting into bypassing ACL system.
[1] https://github.com/hashicorp/nomad/blob/v0.9.5/command/agent/job_endpoint.go#L415-L418
Currently, there is an issue when running on Windows whereby under some
circumstances the Windows stats API's will begin to return errors (such
as internal timeouts) when a client is under high load, and potentially
other forms of resource contention / system states (and other unknown
cases).
When an error occurs during this collection, we then short circuit
further metrics emission from the client until the next interval.
This can be problematic if it happens for a sustained number of
intervals, as our metrics aggregator will begin to age out older
metrics, and we will eventually stop emitting various types of metrics
including `nomad.client.unallocated.*` metrics.
However, when metrics collection fails on Linux, gopsutil will in many cases
(e.g cpu.Times) silently return 0 values, rather than an error.
Here, we switch to returning empty metrics in these failures, and
logging the error at the source. This brings the behaviour into line
with Linux/Unix platforms, and although making aggregation a little
sadder on intermittent failures, will result in more desireable overall
behaviour of keeping metrics available for further investigation if
things look unusual.
Some drivers will automatically create directories when trying to mount
a path into a container, but some will not.
To unify this behaviour, this commit requires that host volumes already exist,
and can be stat'd by the Nomad Agent during client startup.
Currently, using a Volume in a job uses the following configuration:
```
volume "alias-name" {
type = "volume-type"
read_only = true
config {
source = "host_volume_name"
}
}
```
This commit migrates to the following:
```
volume "alias-name" {
type = "volume-type"
source = "host_volume_name"
read_only = true
}
```
The original design was based due to being uncertain about the future of storage
plugins, and to allow maxium flexibility.
However, this causes a few issues, namely:
- We frequently need to parse this configuration during submission,
scheduling, and mounting
- It complicates the configuration from and end users perspective
- It complicates the ability to do validation
As we understand the problem space of CSI a little more, it has become
clear that we won't need the `source` to be in config, as it will be
used in the majority of cases:
- Host Volumes: Always need a source
- Preallocated CSI Volumes: Always needs a source from a volume or claim name
- Dynamic Persistent CSI Volumes*: Always needs a source to attach the volumes
to for managing upgrades and to avoid dangling.
- Dynamic Ephemeral CSI Volumes*: Less thought out, but `source` will probably point
to the plugin name, and a `config` block will
allow you to pass meta to the plugin. Or will
point to a pre-configured ephemeral config.
*If implemented
The new design simplifies this by merging the source into the volume
stanza to solve the above issues with usability, performance, and error
handling.
On macOS, `os.TempDir` returns a symlinked path under `/var` which is
outside of the directories shared into the VM used for Docker, and
that fails tests using Docker that need that mount. If we expand the
symlink to get the real path in `/private`, we're in the shared
folders and can safely mount them.
This is an attempt to ease dependency management for external driver
plugins, by avoiding requiring them to compile ugorji/go generated
files. Plugin developers reported some pain with the brittleness of
ugorji/go dependency in particular, specially when using go mod, the
default go mod manager in golang 1.13.
Context
--------
Nomad uses msgpack to persist and serialize internal structs, using
ugorji/go library. As an optimization, we use ugorji/go code generation
to speedup process and aovid the relection-based slow path.
We commit these generated files in repository when we cut and tag the
release to ease reproducability and debugging old releases. Thus,
downstream projects that depend on release tag, indirectly depends on
ugorji/go generated code.
Sadly, the generated code is brittle and specific to the version of
ugorji/go being used. When go mod picks another version of ugorji/go
then nomad (go mod by default uses release according to semver),
downstream projects face compilation errors.
Interestingly, downstream projects don't commonly serialize nomad
internal structs. Drivers and device plugins use grpc instead of
msgpack for the most part. In the few cases where they use msgpag (e.g.
decoding task config), they do without codegen path as they run on
driver specific structs not the nomad internal structs. Also, the
ugorji/go serialization through reflection is generally backward
compatible (mod some ugorji/go regression bugs that get introduced every
now and then :( ).
Proposal
---------
The proposal here is to keep committing ugorji/go codec generated files
for releases but to use a go tag for them.
All nomad development through the makefile, including releasing, CI and
dev flow, has the tag enabled.
Downstream plugin projects, by default, will skip these files and life
proceed as normal for them.
The downside is that nomad developers who use generated code but avoid
using make must start passing additional go tag argument. Though this
is not a blessed configuration.
Splitting the immutable and mutable components of the scriptCheck led
to a bug where the environment interpolation wasn't being incorporated
into the check's ID, which caused the UpdateTTL to update for a check
ID that Consul didn't have (because our Consul client creates the ID
from the structs.ServiceCheck each time we update).
Task group services don't have access to a task environment at
creation, so their checks get registered before the check can be
interpolated. Use the original check ID so they can be updated.
* ar: refactor network bridge config to use go-cni lib
* ar: use eth as the iface prefix for bridged network namespaces
* vendor: update containerd/go-cni package
* ar: update network hook to use TODO contexts when calling configurator
* unnecessary conversion
In Nomad prior to Consul Connect, all Consul checks work the same
except for Script checks. Because the Task being checked is running in
its own container namespaces, the check is executed by Nomad in the
Task's context. If the Script check passes, Nomad uses the TTL check
feature of Consul to update the check status. This means in order to
run a Script check, we need to know what Task to execute it in.
To support Consul Connect, we need Group Services, and these need to
be registered in Consul along with their checks. We could push the
Service down into the Task, but this doesn't work if someone wants to
associate a service with a task's ports, but do script checks in
another task in the allocation.
Because Nomad is handling the Script check and not Consul anyways,
this moves the script check handling into the task runner so that the
task runner can own the script check's configuration and
lifecycle. This will allow us to pass the group service check
configuration down into a task without associating the service itself
with the task.
When tasks are checked for script checks, we walk back through their
task group to see if there are script checks associated with the
task. If so, we'll spin off script check tasklets for them. The
group-level service and any restart behaviors it needs are entirely
encapsulated within the group service hook.
* connect: add unix socket to proxy grpc for envoy
Fixes#6124
Implement a L4 proxy from a unix socket inside a network namespace to
Consul's gRPC endpoint on the host. This allows Envoy to connect to
Consul's xDS configuration API.
* connect: pointer receiver on structs with mutexes
* connect: warn on all proxy errors
The ClientState being pending isn't a good criteria; as an alloc may
have been updated in-place before it was completed.
Also, updated the logic so we only check for task states. If an alloc
has deployment state but no persisted tasks at all, restore will still
fail.
* taskenv: add connect upstream env vars + test
* set taskenv upstreams instead of appending
* Update client/taskenv/env.go
Co-Authored-By: Michael Schurter <mschurter@hashicorp.com>
This uses an alternative approach where we avoid restoring the alloc
runner in the first place, if we suspect that the alloc may have been
completed already.
This commit aims to help users running with clients suseptible to the
destroyed alloc being restrarted bug upgrade to latest. Without this,
such users will have their tasks run unexpectedly on upgrade and only
see the bug resolved after subsequent restart.
If, on restore, the client sees a pending alloc without any other
persisted info, then err on the side that it's an corrupt persisted
state of an alloc instead of the client happening to be killed right
when alloc is assigned to client.
Few reasons motivate this behavior:
Statistically speaking, corruption being the cause is more likely. A
long running client will have higher chance of having allocs persisted
incorrectly with pending state. Being killed right when an alloc is
about to start is relatively unlikely.
Also, delaying starting an alloc that hasn't started (by hopefully
seconds) is not as severe as launching too many allocs that may bring
client down.
More importantly, this helps customers upgrade their clients without
risking taking their clients down and destablizing their cluster. We
don't want existing users to force triggering the bug while they upgrade
and restart cluster.
Protect against a race where destroying and persist state goroutines
race.
The downside is that the database io operation will run while holding
the lock and may run indefinitely. The risk of lock being long held is
slow destruction, but slow io has bigger problems.
This fixes a bug where allocs that have been GCed get re-run again after client
is restarted. A heavily-used client may launch thousands of allocs on startup
and get killed.
The bug is that an alloc runner that gets destroyed due to GC remains in
client alloc runner set. Periodically, they get persisted until alloc is
gced by server. During that time, the client db will contain the alloc
but not its individual tasks status nor completed state. On client restart,
client assumes that alloc is pending state and re-runs it.
Here, we fix it by ensuring that destroyed alloc runners don't persist any alloc
to the state DB.
This is a short-term fix, as we should consider revamping client state
management. Storing alloc and task information in non-transaction non-atomic
concurrently while alloc runner is running and potentially changing state is a
recipe for bugs.
Fixes https://github.com/hashicorp/nomad/issues/5984
Related to https://github.com/hashicorp/nomad/pull/5890
Fixes a bug where we cpu is pigged at 100% due to collecting devices
statistics. The passed stats interval was ignored, and the default zero
value causes a very tight loop of stats collection.
FWIW, in my testing, it took 2.5-3ms to collect nvidia GPU stats, on a
`g2.2xlarge` ec2 instance.
The stats interval defaults to 1 second and is user configurable. I
believe this is too frequent as a default, and I may advocate for
reducing it to a value closer to 5s or 10s, but keeping it as is for
now.
Fixes https://github.com/hashicorp/nomad/issues/6057 .
* adds meta object to service in job spec, sends it to consul
* adds tests for service meta
* fix tests
* adds docs
* better hashing for service meta, use helper for copying meta when registering service
* tried to be DRY, but looks like it would be more work to use the
helper function
Fixes#6041
Unlike all other Consul operations, boostrapping requires Consul be
available. This PR tries Consul 3 times with a backoff to account for
the group services being asynchronously registered with Consul.
* nomad: add admission controller framework
* nomad: add admission controller framework and Consul Connect hooks
* run admission controllers before checking permissions
* client: add default node meta for connect configurables
* nomad: remove validateJob func since it has been moved to admission controller
* nomad: use new TaskKind type
* client: use consts for connect sidecar image and log level
* Apply suggestions from code review
Co-Authored-By: Michael Schurter <mschurter@hashicorp.com>
* nomad: add job register test with connect sidecar
* Update nomad/job_endpoint_hooks.go
Co-Authored-By: Michael Schurter <mschurter@hashicorp.com>
When rendering a task template, the `plugin` function is no longer
permitted by default and will raise an error. An operator can opt-in
to permitting this function with the new `template.function_blacklist`
field in the client configuration.
When rendering a task template, path parameters for the `file`
function will be treated as relative to the task directory by
default. Relative paths or symlinks that point outside the task
directory will raise an error. An operator can opt-out of this
protection with the new `template.disable_file_sandbox` field in the
client configuration.
When rendering a task consul template, ensure that only task environment
variables are used.
Currently, `consul-template` always falls back to host process
environment variables when key isn't a task env var[1]. Thus, we add
an empty entry for each host process env-var not found in task env-vars.
[1] bfa5d0e133/template/funcs.go (L61-L75)
Adds a new Prerun and Postrun hooks to manage set up of network namespaces
on linux. Work still needs to be done to make the code platform agnostic and
support Docker style network initalization.
