This PR introduces the `address` field in the `service` block so that Nomad
or Consul services can be registered with a custom `.Address.` to advertise.
The address can be an IP address or domain name. If the `address` field is
set, the `service.address_mode` must be set in `auto` mode.
* Add os to NodeListStub struct.
Signed-off-by: Shishir Mahajan <smahajan@roblox.com>
* Add os as a query param to /v1/nodes.
Signed-off-by: Shishir Mahajan <smahajan@roblox.com>
* Add test: os as a query param to /v1/nodes.
Signed-off-by: Shishir Mahajan <smahajan@roblox.com>
We expect every Nomad API client to use a single connection to any
given agent, so take advantage of keep-alive by switching the default
transport to `DefaultPooledClient`. Provide a facility to close idle
connections for testing purposes.
Restores the previously reverted #12409
Co-authored-by: Ben Buzbee <bbuzbee@cloudflare.com>
The only difference is DefaultTransport sets DisableKeepAlives
This doesn't make much sense to me - every http connection from the
nomad client goes to the same NOMAD_ADDR so it's a great case for keep
alive. Except round robin DNS and anycast perhaps.
Consul does this already
1e47e3c82b/api/api.go (L397)
Move some common Vault API data struct decoding out of the Vault client
so it can be reused in other situations.
Make Vault job validation its own function so it's easier to expand it.
Rename the `Job.VaultPolicies` method to just `Job.Vault` since it
returns the full Vault block, not just their policies.
Set `ChangeMode` on `Vault.Canonicalize`.
Add some missing tests.
Allows specifying an entity alias that will be used by Nomad when
deriving the task Vault token.
An entity alias assigns an indentity to a token, allowing better control
and management of Vault clients since all tokens with the same indentity
alias will now be considered the same client. This helps track Nomad
activity in Vault's audit logs and better control over Vault billing.
Add support for a new Nomad server configuration to define a default
entity alias to be used when deriving Vault tokens. This default value
will be used if the task doesn't have an entity alias defined.
Pass-through the `-secret` and `-parameter` flags to allow setting
parameters for the snapshot and overriding the secrets we've stored on
the CSI volume in the state store.
The service registration client name was used to provide a
distinction between the service block and the service client. This
however creates new wording to understand and does not match the
CLI, therefore this change fixes that so we have a Services
client.
Consul specific objects within the service file have been moved to
the consul location to create a clearer separation.
The `related` query param is used to indicate that the request should
return a list of related (next, previous, and blocked) evaluations.
Co-authored-by: Jasmine Dahilig <jasmine@hashicorp.com>
This is a followup to running tests in serial in CI.
Since the API package cannot import anything outside of api/,
copy the ci.Parallel function into api/internal/testutil, and
have api tests use that.
When we set the headers for CSI secrets in the `WriteOptions`, it
turns out that we're not always passing a non-nil object. In that
case, instanstiate it on demand in the API.
The paginator logic was built when go-memdb iterators would return items
ordered lexicographically by their ID prefixes, but #12054 added the
option for some tables to return results ordered by their `CreateIndex`
instead, which invalidated the previous paginator assumption.
The iterator used for pagination must still return results in some order
so that the paginator can properly handle requests where the next_token
value is not present in the results anymore (e.g., the eval was GC'ed).
In these situations, the paginator will start the returned page in the
first element right after where the requested token should've been.
This commit moves the logic to generate pagination tokens from the
elements being paginated to the iterator itself so that callers can have
more control over the token format to make sure they are properly
ordered and stable.
It also allows configuring the paginator as being ordered in ascending
or descending order, which is relevant when looking for a token that may
not be present anymore.
Detection of the full set of plugin capabilities was added in Nomad
1.1 for the volume creation workflow, but these were not added to the
API response for plugins.
These API endpoints now return results in chronological order. They
can return results in reverse chronological order by setting the
query parameter ascending=true.
- Eval.List
- Deployment.List
This PR replaces use of time.After with a safe helper function
that creates a time.Timer to use instead. The new function returns
both a time.Timer and a Stop function that the caller must handle.
Unlike time.NewTimer, the helper function does not panic if the duration
set is <= 0.
This PR sets the minimum Go version for the `api` submodule to Go 1.17.
It also upgrades
- gorilla/websocket 1.4.1 -> 1.4.2
- mitchelh/mapstructure 1.4.2 -> 1.4.3
- stretchr/testify 1.5.1 -> 1.7.0
Closes#11518#11602#11528
After swapping gzip handler to use the gorilla library, we
must account for a quirk in how zero/minimal length response
bodies are delivered.
The previous gzip handler was configured to compress all responses
regardless of size - even if the data was zero length or below the
network MTU. This behavior changed in [v1.1.0](c551b6c3b4 (diff-de723e6602cc2f16f7a9d85fd89d69954edc12a49134dab8901b10ee06d1879d))
which is why we could not upgrade.
The Nomad HTTP Client mutates the http.Response.Body object, making
a strong assumption that if the Content-Encoding header is set to "gzip",
the response will be readable via gzip decoder. This is no longer true
for the nytimes gzip handler, and is also not true for the gorilla gzip
handler.
It seems in practice this only makes a difference on the /v1/operator/license
endpoint which returns an empty response in OSS Nomad.
The fix here is to simply not wrap the response body reader if we
encounter an io.EOF while creating the gzip reader - indicating there
is no data to decode.
This PR exposes the following existing`consul-template` configuration options to Nomad jobspec authors in the `{job.group.task.template}` stanza.
- `wait`
It also exposes the following`consul-template` configuration to Nomad operators in the `{client.template}` stanza.
- `max_stale`
- `block_query_wait`
- `consul_retry`
- `vault_retry`
- `wait`
Finally, it adds the following new Nomad-specific configuration to the `{client.template}` stanza that allows Operators to set bounds on what `jobspec` authors configure.
- `wait_bounds`
Co-authored-by: Tim Gross <tgross@hashicorp.com>
Co-authored-by: Michael Schurter <mschurter@hashicorp.com>
## Development Environment Changes
* Added stringer to build deps
## New HTTP APIs
* Added scheduler worker config API
* Added scheduler worker info API
## New Internals
* (Scheduler)Worker API refactor—Start(), Stop(), Pause(), Resume()
* Update shutdown to use context
* Add mutex for contended server data
- `workerLock` for the `workers` slice
- `workerConfigLock` for the `Server.Config.NumSchedulers` and
`Server.Config.EnabledSchedulers` values
## Other
* Adding docs for scheduler worker api
* Add changelog message
Co-authored-by: Derek Strickland <1111455+DerekStrickland@users.noreply.github.com>
When a cluster doesn't have a leader, the `nomad operator debug`
command can safely use stale queries to gracefully degrade the
consistency of almost all its queries. The query parameter for these
API calls was not being set by the command.
Some `api` package queries do not include `QueryOptions` because
they target a specific agent, but they can potentially be forwarded to
other agents. If there is no leader, these forwarded queries will
fail. Provide methods to call these APIs with `QueryOptions`.
Some operators use very long group/task `shutdown_delay` settings to
safely drain network connections to their workloads after service
deregistration. But during incident response, they may want to cause
that drain to be skipped so they can quickly shed load.
Provide a `-no-shutdown-delay` flag on the `nomad alloc stop` and
`nomad job stop` commands that bypasses the delay. This sets a new
desired transition state on the affected allocations that the
allocation/task runner will identify during pre-kill on the client.
Note (as documented here) that using this flag will almost always
result in failed inbound network connections for workloads as the
tasks will exit before clients receive updated service discovery
information and won't be gracefully drained.
API queries can request pagination using the `NextToken` and `PerPage`
fields of `QueryOptions`, when supported by the underlying API.
Add a `NextToken` field to the `structs.QueryMeta` so that we have a
common field across RPCs to tell the caller where to resume paging
from on their next API call. Include this field on the `api.QueryMeta`
as well so that it's available for future versions of List HTTP APIs
that wrap the response with `QueryMeta` rather than returning a simple
list of structs. In the meantime callers can get the `X-Nomad-NextToken`.
Add pagination to the `Eval.List` RPC by checking for pagination token
and page size in `QueryOptions`. This will allow resuming from the
last ID seen so long as the query parameters and the state store
itself are unchanged between requests.
Add filtering by job ID or evaluation status over the results we get
out of the state store.
Parse the query parameters of the `Eval.List` API into the arguments
expected for filtering in the RPC call.
During incident response, operators may find that automated processes
elsewhere in the organization can be generating new workloads on Nomad
clusters that are unable to handle the workload. This changeset adds a
field to the `SchedulerConfiguration` API that causes all job
registration calls to be rejected unless the request has a management
ACL token.
This change modifies the Nomad job register and deregister RPCs to
accept an updated option set which includes eval priority. This
param is optional and override the use of the job priority to set
the eval priority.
In order to ensure all evaluations as a result of the request use
the same eval priority, the priority is shared to the
allocReconciler and deploymentWatcher. This creates a new
distinction between eval priority and job priority.
The Nomad agent HTTP API has been modified to allow setting the
eval priority on job update and delete. To keep consistency with
the current v1 API, job update accepts this as a payload param;
job delete accepts this as a query param.
Any user supplied value is validated within the agent HTTP handler
removing the need to pass invalid requests to the server.
The register and deregister opts functions now all for setting
the eval priority on requests.
The change includes a small change to the DeregisterOpts function
which handles nil opts. This brings the function inline with the
RegisterOpts.
* build(deps): bump github.com/kr/pretty from 0.1.0 to 0.3.0 in /api
Bumps [github.com/kr/pretty](https://github.com/kr/pretty) from 0.1.0 to 0.3.0.
- [Release notes](https://github.com/kr/pretty/releases)
- [Commits](https://github.com/kr/pretty/compare/v0.1.0...v0.3.0)
---
updated-dependencies:
- dependency-name: github.com/kr/pretty
dependency-type: direct:production
update-type: version-update:semver-minor
...
Signed-off-by: dependabot[bot] <support@github.com>
* update in core as well and tidy
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Tim Gross <tim@0x74696d.com>
Enhance the CLI in order to return the host network in two flavors
(default, verbose) of the `node status` command.
Fixes: #11223.
Signed-off-by: Alessandro De Blasis <alex@deblasis.net>
Add a new hostname string parameter to the network block which
allows operators to specify the hostname of the network namespace.
Changing this causes a destructive update to the allocation and it
is omitted if empty from API responses. This parameter also supports
interpolation.
In order to have a hostname passed as a configuration param when
creating an allocation network, the CreateNetwork func of the
DriverNetworkManager interface needs to be updated. In order to
minimize the disruption of future changes, rather than add another
string func arg, the function now accepts a request struct along with
the allocID param. The struct has the hostname as a field.
The in-tree implementations of DriverNetworkManager.CreateNetwork
have been modified to account for the function signature change.
In updating for the change, the enhancement of adding hostnames to
network namespaces has also been added to the Docker driver, whilst
the default Linux manager does not current implement it.
This PR implements a new "System Batch" scheduler type. Jobs can
make use of this new scheduler by setting their type to 'sysbatch'.
Like the name implies, sysbatch can be thought of as a hybrid between
system and batch jobs - it is for running short lived jobs intended to
run on every compatible node in the cluster.
As with batch jobs, sysbatch jobs can also be periodic and/or parameterized
dispatch jobs. A sysbatch job is considered complete when it has been run
on all compatible nodes until reaching a terminal state (success or failed
on retries).
Feasibility and preemption are governed the same as with system jobs. In
this PR, the update stanza is not yet supported. The update stanza is sill
limited in functionality for the underlying system scheduler, and is
not useful yet for sysbatch jobs. Further work in #4740 will improve
support for the update stanza and deployments.
Closes#2527
* api: revert to defaulting to http/1
PR #10778 incidentally changed the api http client to connect with
HTTP/2 first. However, the websocket libraries used in `alloc exec`
features don't handle http/2 well, and don't downgrade to http/1
gracefully.
Given that the switch is incidental, and not requested by users.
Furthermore, api consumers can opt-in to forcing http/2 by setting
custom http clients.
Fixes#10922
This PR fixes the API to _not_ set the default mesh gateway mode. Before,
the mode would be set to "none" in Canonicalize, which is incorrect. We
should pass through the empty string so that folks can make use of Consul
service-defaults Config entries to configure the default mode.
This PR implements first-class support for Nomad running Consul
Connect Mesh Gateways. Mesh gateways enable services in the Connect
mesh to make cross-DC connections via gateways, where each datacenter
may not have full node interconnectivity.
Consul docs with more information:
https://www.consul.io/docs/connect/gateways/mesh-gateway
The following group level service block can be used to establish
a Connect mesh gateway.
service {
connect {
gateway {
mesh {
// no configuration
}
}
}
}
Services can make use of a mesh gateway by configuring so in their
upstream blocks, e.g.
service {
connect {
sidecar_service {
proxy {
upstreams {
destination_name = "<service>"
local_bind_port = <port>
datacenter = "<datacenter>"
mesh_gateway {
mode = "<mode>"
}
}
}
}
}
}
Typical use of a mesh gateway is to create a bridge between datacenters.
A mesh gateway should then be configured with a service port that is
mapped from a host_network configured on a WAN interface in Nomad agent
config, e.g.
client {
host_network "public" {
interface = "eth1"
}
}
Create a port mapping in the group.network block for use by the mesh
gateway service from the public host_network, e.g.
network {
mode = "bridge"
port "mesh_wan" {
host_network = "public"
}
}
Use this port label for the service.port of the mesh gateway, e.g.
service {
name = "mesh-gateway"
port = "mesh_wan"
connect {
gateway {
mesh {}
}
}
}
Currently Envoy is the only supported gateway implementation in Consul.
By default Nomad client will run the latest official Envoy docker image
supported by the local Consul agent. The Envoy task can be customized
by setting `meta.connect.gateway_image` in agent config or by setting
the `connect.sidecar_task` block.
Gateways require Consul 1.8.0+, enforced by the Nomad scheduler.
Closes#9446
refactor the api handling of `nomad exec`, and ensure that we process
all received events before handling websocket closing.
The exit code should be the last message received, and we ought to
ignore any websocket close error we receive afterwards.
Previously, we used two channels: one for websocket frames and another
for handling errors. This raised the possibility that we processed the
error before processing the frames, resulting into an "unexpected EOF"
error.
Add a new driver capability: RemoteTasks.
When a task is run by a driver with RemoteTasks set, its TaskHandle will
be propagated to the server in its allocation's TaskState. If the task
is replaced due to a down node or draining, its TaskHandle will be
propagated to its replacement allocation.
This allows tasks to be scheduled in remote systems whose lifecycles are
disconnected from the Nomad node's lifecycle.
See https://github.com/hashicorp/nomad-driver-ecs for an example ECS
remote task driver.
Small change to pull in ent struct types in a switch
statement used by ent. They are benign in oss, this
is just to make sure OSS->ENT merges don't create a
diff.
This PR introduces the /v1/search/fuzzy API endpoint, used for fuzzy
searching objects in Nomad. The fuzzy search endpoint routes requests
to the Nomad Server leader, which implements the Search.FuzzySearch RPC
method.
Requests to the fuzzy search API are based on the api.FuzzySearchRequest
object, e.g.
{
"Text": "ed",
"Context": "all"
}
Responses from the fuzzy search API are based on the api.FuzzySearchResponse
object, e.g.
{
"Index": 27,
"KnownLeader": true,
"LastContact": 0,
"Matches": {
"tasks": [
{
"ID": "redis",
"Scope": [
"default",
"example",
"cache"
]
}
],
"evals": [],
"deployment": [],
"volumes": [],
"scaling_policy": [],
"images": [
{
"ID": "redis:3.2",
"Scope": [
"default",
"example",
"cache",
"redis"
]
}
]
},
"Truncations": {
"volumes": false,
"scaling_policy": false,
"evals": false,
"deployment": false
}
}
The API is tunable using the new server.search stanza, e.g.
server {
search {
fuzzy_enabled = true
limit_query = 200
limit_results = 1000
min_term_length = 5
}
}
These values can be increased or decreased, so as to provide more
search results or to reduce load on the Nomad Server. The fuzzy search
API can be disabled entirely by setting `fuzzy_enabled` to `false`.
Consul allows specifying the HTTP body to send in a health check. Nomad
uses Consul for health checking so this just plumbs the value through to
where the Consul API is called.
There is no validation that `body` is not used with an incompatible
check method like GET.
Our API client `delete` method doesn't include a request body, but accepts an
interface for the response. We were accidentally putting the request body into
the response, which doesn't get picked up in unit tests because we're not
reading the (always empty) response body anyways.
Registration of Nomad volumes previously allowed for a single volume
capability (access mode + attachment mode pair). The recent `volume create`
command requires that we pass a list of requested capabilities, but the
existing workflow for claiming volumes and attaching them on the client
assumed that the volume's single capability was correct and unchanging.
Add `AccessMode` and `AttachmentMode` to `CSIVolumeClaim`, use these fields to
set the initial claim value, and add backwards compatibility logic to handle
the existing volumes that already have claims without these fields.
This PR adds the common OSS changes for adding support for Consul Namespaces,
which is going to be a Nomad Enterprise feature. There is no new functionality
provided by this changeset and hopefully no new bugs.
Add new commands for creating, deleting, and listing external storage
volumes. Includes HCL decoding update for volume spec so that we can humanize
capacity bytes input values.
This commit updates the API to pass the MemoryMaxMB field, and the CLI to show
the max set for the task.
Also, start parsing the MemoryMaxMB in hcl2, as it's set by tags.
A sample CLI output; note the additional `Max: ` for "task":
```
$ nomad alloc status 96fbeb0b
ID = 96fbeb0b-a0b3-aa95-62bf-b8a39492fd5c
[...]
Task "cgroup-fetcher" is "running"
Task Resources
CPU Memory Disk Addresses
0/500 MHz 32 MiB/20 MiB 300 MiB
Task Events:
[...]
Task "task" is "running"
Task Resources
CPU Memory Disk Addresses
0/500 MHz 176 KiB/20 MiB 300 MiB
Max: 30 MiB
Task Events:
[...]
```
node drain: use msgtype on txn so that events are emitted
wip: encoding extension to add Node.Drain field back to API responses
new approach for hiding Node.SecretID in the API, using `json` tag
documented this approach in the contributing guide
refactored the JSON handlers with extensions
modified event stream encoding to use the go-msgpack encoders with the extensions
Add a `PerAlloc` field to volume requests that directs the scheduler to test
feasibility for volumes with a source ID that includes the allocation index
suffix (ex. `[0]`), rather than the exact source ID.
Read the `PerAlloc` field when making the volume claim at the client to
determine if the allocation index suffix (ex. `[0]`) should be added to the
volume source ID.
Callers of `CSIVolumeByID` are generally assuming they should receive a single
volume. This potentially results in feasibility checking being performed
against the wrong volume if a volume's ID is a prefix substring of other
volume (for example: "test" and "testing").
Removing the incorrect prefix matching from `CSIVolumeByID` breaks prefix
matching in the command line client. Add the required elements for prefix
matching to the commands and API.
* Fixup uses of `sanity`
* Remove unnecessary comments.
These checks are better explained by earlier comments about
the context of the test. Per @tgross, moved the tests together
to better reinforce the overall shared context.
* Update nomad/fsm_test.go
If the user has disabled Prometheus metrics and a request is
sent to the metrics endpoint requesting Prometheus formatted
metrics, then the request should fail.
Allow for readiness type checks by configuring nomad to ignore warnings
or errors reported by a service check. This allows the deployment to
progress and while Consul handles introducing the sercive into a
resource pool once the check passes.
This PR implements Nomad built-in support for running Consul Connect
terminating gateways. Such a gateway can be used by services running
inside the service mesh to access "legacy" services running outside
the service mesh while still making use of Consul's service identity
based networking and ACL policies.
https://www.consul.io/docs/connect/gateways/terminating-gateway
These gateways are declared as part of a task group level service
definition within the connect stanza.
service {
connect {
gateway {
proxy {
// envoy proxy configuration
}
terminating {
// terminating-gateway configuration entry
}
}
}
}
Currently Envoy is the only supported gateway implementation in
Consul. The gateay task can be customized by configuring the
connect.sidecar_task block.
When the gateway.terminating field is set, Nomad will write/update
the Configuration Entry into Consul on job submission. Because CEs
are global in scope and there may be more than one Nomad cluster
communicating with Consul, there is an assumption that any terminating
gateway defined in Nomad for a particular service will be the same
among Nomad clusters.
Gateways require Consul 1.8.0+, checked by a node constraint.
Closes#9445
If the connect.proxy stanza is left unset, the connection timeout
value is not set but is assumed to be, and may cause a non-fatal NPE
on job submission.
Deflake test-api job, currently failing at around 7.6% (44 out of 578
workflows), by ensuring that test nomad agent use a small dedicated port
range that doesn't conflict with the kernel ephemeral range.
The failures are disproportionatly related to port allocation, where a
nomad agent fails to start when the http port is already bound to
another process. The failures are intermitent and aren't specific to any
test in particular. The following is a representative failure:
https://app.circleci.com/pipelines/github/hashicorp/nomad/13995/workflows/6cf6eb38-f93c-46f8-8aa0-f61e62fe7694/jobs/128169
.
Upon investigation, the issue seems to be that the api freeport library
picks a port block within 10,000-14,500, but that overlaps with the
kernel ephemeral range 32,769-60,999! So, freeport may allocate a free
port to the nomad agent, just to be used by another process before the
nomad agent starts!
This happened for example in
https://app.circleci.com/pipelines/github/hashicorp/nomad/14111/workflows/e1fcd7ff-f0e0-4796-8719-f57f510b1ffa/jobs/129684
. `freeport` allocated port 41662 to serf, but `google_accounts`
raced to use it to connect to the CirleCI vm metadata service.
We avoid such races by using a dedicated port range that's disjoint from
the kernel ephemeral port range.
In a few places Nomad was using flag implementations directly
from Consul, lending to Nomad's need to import consul. Replace
those uses with helpers already in Nomad, and copy over the bare
minimum needed to make the autopilot flags behave as they have.
* use full name for events
use evaluation and allocation instead of short name
* update api event stream package and shortnames
* update docs
* make sync; fix typo
* backwards compat not from 1.0.0-beta event stream api changes
* use api types instead of string
* rm backwards compat note that only changed between prereleases
* remove backwards incompat that only existed in prereleases
* Remove Managed Sinks from Nomad
Managed Sinks were a beta feature in Nomad 1.0-beta2. During the beta
period it was determined that this was not a scalable approach to
support community and third party sinks.
* update comment
* changelog
Before, upstreams could only be defined using the default datacenter.
Now, the `datacenter` field can be set in a connect upstream definition,
informing consul of the desire for an instance of the upstream service
in the specified datacenter. The field is optional and continues to
default to the local datacenter.
Closes#8964
The API is missing values for `ReadAllocs` and `WriteAllocs` fields, resulting
in allocation claims not being populated in the web UI. These fields mirror
the fields in `nomad/structs.CSIVolume`. Returning a separate list of stubs
for read and write would be ideal, but this can't be done without either
bloating the API response with repeated full `Allocation` data, or causing a
panic in previous versions of the CLI.
The `nomad/structs` fields are persisted with nil values and are populated
during RPC, so we'll do the same in the HTTP API and populate the `ReadAllocs`
and `WriteAllocs` fields with a map of allocation IDs, but with null
values. The web UI will then create its `ReadAllocations` and
`WriteAllocations` fields by mapping from those IDs to the values in
`Allocations`, instead of flattening the map into a list.
Seth Hoenig