This PR adds initial support for running Consul Connect Ingress Gateways (CIGs) in Nomad. These gateways are declared as part of a task group level service definition within the connect stanza.
```hcl
service {
connect {
gateway {
proxy {
// envoy proxy configuration
}
ingress {
// ingress-gateway configuration entry
}
}
}
}
```
A gateway can be run in `bridge` or `host` networking mode, with the caveat that host networking necessitates manually specifying the Envoy admin listener (which cannot be disabled) via the service port value.
Currently Envoy is the only supported gateway implementation in Consul, and Nomad only supports running Envoy as a gateway using the docker driver.
Aims to address #8294 and tangentially #8647
The `regionForJob` function in the HTTP job endpoint overrides the region for
multiregion jobs to `global`, which is used as a sentinel value in the
server's job endpoint to avoid re-registration loops. This changeset removes
an extraneous check that results in errors in the web UI and makes
round-tripping through the HTTP API cumbersome for all consumers.
This change adds the ability to set the fields `success_before_passing` and
`failures_before_critical` on Consul service check definitions. This is a
feature added to Consul v1.7.0 and later.
https://www.consul.io/docs/agent/checks#success-failures-before-passing-critical
Nomad doesn't do much besides pass the fields through to Consul.
Fixes#6913
adds in oss components to support enterprise multi-vault namespace feature
upgrade specific doc on vault multi-namespaces
vault docs
update test to reflect new error
Integration points for multiregion jobs to be registered in the enterprise
version of Nomad:
* hook in `Job.Register` for enterprise to send job to peer regions
* remove monitoring from `nomad job run` and `nomad job stop` for multiregion jobs
Allow a `/v1/jobs?all_namespaces=true` to list all jobs across all
namespaces. The returned list is to contain a `Namespace` field
indicating the job namespace.
If ACL is enabled, the request token needs to be a management token or
have `namespace:list-jobs` capability on all existing namespaces.
* jobspec, api: add stop_after_client_disconnect
* nomad/state/state_store: error message typo
* structs: alloc methods to support stop_after_client_disconnect
1. a global AllocStates to track status changes with timestamps. We
need this to track the time at which the alloc became lost
originally.
2. ShouldClientStop() and WaitClientStop() to actually do the math
* scheduler/reconcile_util: delayByStopAfterClientDisconnect
* scheduler/reconcile: use delayByStopAfterClientDisconnect
* scheduler/util: updateNonTerminalAllocsToLost comments
This was setup to only update allocs to lost if the DesiredStatus had
already been set by the scheduler. It seems like the intention was to
update the status from any non-terminal state, and not all lost allocs
have been marked stop or evict by now
* scheduler/testing: AssertEvalStatus just use require
* scheduler/generic_sched: don't create a blocked eval if delayed
* scheduler/generic_sched_test: several scheduling cases
Part of #6120
Building on the support for enabling connect proxy paths in #7323, this change
adds the ability to configure the 'service.check.expose' flag on group-level
service check definitions for services that are connect-enabled. This is a slight
deviation from the "magic" that Consul provides. With Consul, the 'expose' flag
exists on the connect.proxy stanza, which will then auto-generate expose paths
for every HTTP and gRPC service check associated with that connect-enabled
service.
A first attempt at providing similar magic for Nomad's Consul Connect integration
followed that pattern exactly, as seen in #7396. However, on reviewing the PR
we realized having the `expose` flag on the proxy stanza inseperably ties together
the automatic path generation with every HTTP/gRPC defined on the service. This
makes sense in Consul's context, because a service definition is reasonably
associated with a single "task". With Nomad's group level service definitions
however, there is a reasonable expectation that a service definition is more
abstractly representative of multiple services within the task group. In this
case, one would want to define checks of that service which concretely make HTTP
or gRPC requests to different underlying tasks. Such a model is not possible
with the course `proxy.expose` flag.
Instead, we now have the flag made available within the check definitions themselves.
By making the expose feature resolute to each check, it is possible to have
some HTTP/gRPC checks which make use of the envoy exposed paths, as well as
some HTTP/gRPC checks which make use of some orthongonal port-mapping to do
checks on some other task (or even some other bound port of the same task)
within the task group.
Given this example,
group "server-group" {
network {
mode = "bridge"
port "forchecks" {
to = -1
}
}
service {
name = "myserver"
port = 2000
connect {
sidecar_service {
}
}
check {
name = "mycheck-myserver"
type = "http"
port = "forchecks"
interval = "3s"
timeout = "2s"
method = "GET"
path = "/classic/responder/health"
expose = true
}
}
}
Nomad will automatically inject (via job endpoint mutator) the
extrapolated expose path configuration, i.e.
expose {
path {
path = "/classic/responder/health"
protocol = "http"
local_path_port = 2000
listener_port = "forchecks"
}
}
Documentation is coming in #7440 (needs updating, doing next)
Modifications to the `countdash` examples in https://github.com/hashicorp/demo-consul-101/pull/6
which will make the examples in the documentation actually runnable.
Will add some e2e tests based on the above when it becomes available.
Enable configuration of HTTP and gRPC endpoints which should be exposed by
the Connect sidecar proxy. This changeset is the first "non-magical" pass
that lays the groundwork for enabling Consul service checks for tasks
running in a network namespace because they are Connect-enabled. The changes
here provide for full configuration of the
connect {
sidecar_service {
proxy {
expose {
paths = [{
path = <exposed endpoint>
protocol = <http or grpc>
local_path_port = <local endpoint port>
listener_port = <inbound mesh port>
}, ... ]
}
}
}
stanza. Everything from `expose` and below is new, and partially implements
the precedent set by Consul:
https://www.consul.io/docs/connect/registration/service-registration.html#expose-paths-configuration-reference
Combined with a task-group level network port-mapping in the form:
port "exposeExample" { to = -1 }
it is now possible to "punch a hole" through the network namespace
to a specific HTTP or gRPC path, with the anticipated use case of creating
Consul checks on Connect enabled services.
A future PR may introduce more automagic behavior, where we can do things like
1) auto-fill the 'expose.path.local_path_port' with the default value of the
'service.port' value for task-group level connect-enabled services.
2) automatically generate a port-mapping
3) enable an 'expose.checks' flag which automatically creates exposed endpoints
for every compatible consul service check (http/grpc checks on connect
enabled services).
- tg.Count defaults to tg.Scaling.Min if present (falls back on previous default of 1 if Scaling is absent)
- Validate() enforces tg.Scaling.Min <= tg.Count <= tg.Scaling.Max
modification in ApiScalingPolicyToStructs, api.TaskGroup.Validate so that defaults are handled for TaskGroup.Count and
Add mount_options to both the volume definition on registration and to the volume block in the group where the volume is requested. If both are specified, the options provided in the request replace the options defined in the volume. They get passed to the NodePublishVolume, which causes the node plugin to actually mount the volume on the host.
Individual tasks just mount bind into the host mounted volume (unchanged behavior). An operator can mount the same volume with different options by specifying it twice in the group context.
closes#7007
* nomad/structs/volumes: add MountOptions to volume request
* jobspec/test-fixtures/basic.hcl: add mount_options to volume block
* jobspec/parse_test: add expected MountOptions
* api/tasks: add mount_options
* jobspec/parse_group: use hcl decode not mapstructure, mount_options
* client/allocrunner/csi_hook: pass MountOptions through
client/allocrunner/csi_hook: add a VolumeMountOptions
client/allocrunner/csi_hook: drop Options
client/allocrunner/csi_hook: use the structs options
* client/pluginmanager/csimanager/interface: UsageOptions.MountOptions
* client/pluginmanager/csimanager/volume: pass MountOptions in capabilities
* plugins/csi/plugin: remove todo 7007 comment
* nomad/structs/csi: MountOptions
* api/csi: add options to the api for parsing, match structs
* plugins/csi/plugin: move VolumeMountOptions to structs
* api/csi: use specific type for mount_options
* client/allocrunner/csi_hook: merge MountOptions here
* rename CSIOptions to CSIMountOptions
* client/allocrunner/csi_hook
* client/pluginmanager/csimanager/volume
* nomad/structs/csi
* plugins/csi/fake/client: add PrevVolumeCapability
* plugins/csi/plugin
* client/pluginmanager/csimanager/volume_test: remove debugging
* client/pluginmanager/csimanager/volume: fix odd merging logic
* api: rename CSIOptions -> CSIMountOptions
* nomad/csi_endpoint: remove a 7007 comment
* command/alloc_status: show mount options in the volume list
* nomad/structs/csi: include MountOptions in the volume stub
* api/csi: add MountOptions to stub
* command/volume_status_csi: clean up csiVolMountOption, add it
* command/alloc_status: csiVolMountOption lives in volume_csi_status
* command/node_status: display mount flags
* nomad/structs/volumes: npe
* plugins/csi/plugin: npe in ToCSIRepresentation
* jobspec/parse_test: expand volume parse test cases
* command/agent/job_endpoint: ApiTgToStructsTG needs MountOptions
* command/volume_status_csi: copy paste error
* jobspec/test-fixtures/basic: hclfmt
* command/volume_status_csi: clean up csiVolMountOption
Previously when deserializing volumes we skipped over volumes that were
not of type `host`. This commit ensures that we parse both host and csi
volumes correctly.
This changeset implements the initial registration and fingerprinting
of CSI Plugins as part of #5378. At a high level, it introduces the
following:
* A `csi_plugin` stanza as part of a Nomad task configuration, to
allow a task to expose that it is a plugin.
* A new task runner hook: `csi_plugin_supervisor`. This hook does two
things. When the `csi_plugin` stanza is detected, it will
automatically configure the plugin task to receive bidirectional
mounts to the CSI intermediary directory. At runtime, it will then
perform an initial heartbeat of the plugin and handle submitting it to
the new `dynamicplugins.Registry` for further use by the client, and
then run a lightweight heartbeat loop that will emit task events
when health changes.
* The `dynamicplugins.Registry` for handling plugins that run
as Nomad tasks, in contrast to the existing catalog that requires
`go-plugin` type plugins and to know the plugin configuration in
advance.
* The `csimanager` which fingerprints CSI plugins, in a similar way to
`drivermanager` and `devicemanager`. It currently only fingerprints
the NodeID from the plugin, and assumes that all plugins are
monolithic.
Missing features
* We do not use the live updates of the `dynamicplugin` registry in
the `csimanager` yet.
* We do not deregister the plugins from the client when they shutdown
yet, they just become indefinitely marked as unhealthy. This is
deliberate until we figure out how we should manage deploying new
versions of plugins/transitioning them.
Consul provides a feature of Service Definitions where the tags
associated with a service can be modified through the Catalog API,
overriding the value(s) configured in the agent's service configuration.
To enable this feature, the flag enable_tag_override must be configured
in the service definition.
Previously, Nomad did not allow configuring this flag, and thus the default
value of false was used. Now, it is configurable.
Because Nomad itself acts as a state machine around the the service definitions
of the tasks it manages, it's worth describing what happens when this feature
is enabled and why.
Consider the basic case where there is no Nomad, and your service is provided
to consul as a boring JSON file. The ultimate source of truth for the definition
of that service is the file, and is stored in the agent. Later, Consul performs
"anti-entropy" which synchronizes the Catalog (stored only the leaders). Then
with enable_tag_override=true, the tags field is available for "external"
modification through the Catalog API (rather than directly configuring the
service definition file, or using the Agent API). The important observation
is that if the service definition ever changes (i.e. the file is changed &
config reloaded OR the Agent API is used to modify the service), those
"external" tag values are thrown away, and the new service definition is
once again the source of truth.
In the Nomad case, Nomad itself is the source of truth over the Agent in
the same way the JSON file was the source of truth in the example above.
That means any time Nomad sets a new service definition, any externally
configured tags are going to be replaced. When does this happen? Only on
major lifecycle events, for example when a task is modified because of an
updated job spec from the 'nomad job run <existing>' command. Otherwise,
Nomad's periodic re-sync's with Consul will now no longer try to restore
the externally modified tag values (as long as enable_tag_override=true).
Fixes#2057
This change provides an initial pass at setting up the configuration necessary to
enable use of Connect with Consul ACLs. Operators will be able to pass in a Consul
Token through `-consul-token` or `$CONSUL_TOKEN` in the `job run` and `job revert`
commands (similar to Vault tokens).
These values are not actually used yet in this changeset.
copy struct values
ensure groupserviceHook implements RunnerPreKillhook
run deregister first
test that shutdown times are delayed
move magic number into variable
