This PR switches the Nomad repository from using govendor to Go modules
for managing dependencies. Aspects of the Nomad workflow remain pretty
much the same. The usual Makefile targets should continue to work as
they always did. The API submodule simply defers to the parent Nomad
version on the repository, keeping the semantics of API versioning that
currently exists.
* changes necessary to support oss licesning shims
revert nomad fmt changes
update test to work with enterprise changes
update tests to work with new ent enforcements
make check
update cas test to use scheduler algorithm
back out preemption changes
add comments
* remove unused method
We have been using fatih/hclfmt which is long abandoned. Instead, switch
to HashiCorp's own hclfmt implementation. There are some trivial changes in
behavior around whitespace.
Allow a `/v1/jobs?all_namespaces=true` to list all jobs across all
namespaces. The returned list is to contain a `Namespace` field
indicating the job namespace.
If ACL is enabled, the request token needs to be a management token or
have `namespace:list-jobs` capability on all existing namespaces.
* jobspec, api: add stop_after_client_disconnect
* nomad/state/state_store: error message typo
* structs: alloc methods to support stop_after_client_disconnect
1. a global AllocStates to track status changes with timestamps. We
need this to track the time at which the alloc became lost
originally.
2. ShouldClientStop() and WaitClientStop() to actually do the math
* scheduler/reconcile_util: delayByStopAfterClientDisconnect
* scheduler/reconcile: use delayByStopAfterClientDisconnect
* scheduler/util: updateNonTerminalAllocsToLost comments
This was setup to only update allocs to lost if the DesiredStatus had
already been set by the scheduler. It seems like the intention was to
update the status from any non-terminal state, and not all lost allocs
have been marked stop or evict by now
* scheduler/testing: AssertEvalStatus just use require
* scheduler/generic_sched: don't create a blocked eval if delayed
* scheduler/generic_sched_test: several scheduling cases
CSI plugins can require credentials for some publishing and
unpublishing workflow RPCs. Secrets are configured at the time of
volume registration, stored in the volume struct, and then passed
around as an opaque map by Nomad to the plugins.
This changeset implements a periodic garbage collection of CSI volumes
with missing allocations. This can happen in a scenario where a node
update fails partially and the allocation updates are written to raft
but the evaluations to GC the volumes are dropped. This feature will
cover this edge case and ensure that upgrades from 0.11.0 and 0.11.1
get any stray claims cleaned up.
Ensure that `""` Scheduler Algorithm gets explicitly set to binpack on
upgrades or on API handling when user misses the value.
The scheduler already treats `""` value as binpack. This PR merely
ensures that the operator API returns the effective value.
This changeset implements a periodic garbage collection of unused CSI
plugins. Plugins are self-cleaning when the last allocation for a
plugin is stopped, but this feature will cover any missing edge cases
and ensure that upgrades from 0.11.0 and 0.11.1 get any stray plugins
cleaned up.
Failed requests due to API client errors are to be marked as DEBUG.
The Error log level should be reserved to signal problems with the
cluster and are actionable for nomad system operators. Logs due to
misbehaving API clients don't represent a system level problem and seem
spurius to nomad maintainers at best. These log messages can also be
attack vectors for deniel of service attacks by filling servers disk
space with spurious log messages.
Pipe http server log to hclog, so that it uses the same logging format
as rest of nomad logs. Also, supports emitting them as json logs, when
json formatting is set.
The http server logs are emitted as Trace level, as they are typically
repsent HTTP client errors (e.g. failed tls handshakes, invalid headers,
etc).
Though, Panic logs represent server errors and are relayed as Error
level.
Shutdown http server last, after nomad client/server components
terminate.
Before this change, if the agent is taking an unexpectedly long time to
shutdown, the operator cannot query the http server directly: they
cannot access agent specific http endpoints and need to query another
agent about the troublesome agent.
Unexpectedly long shutdown can happen in normal cases, e.g. a client
might hung is if one of the allocs it is running has a long
shutdown_delay.
Here, we switch to ensuring that the http server is shutdown last.
I believe this doesn't require extra care in agent shutting down logic
while operators may be able to submit write http requests. We already
need to cope with operators submiting these http requests to another
agent or by servers updating the client allocations.
Some tests assert on numbers on numbers of servers, e.g.
TestHTTP_AgentSetServers and TestHTTP_AgentListServers_ACL . Though, in dev and
test modes, the agent starts with servers having duplicate entries for
advertised and normalized RPC values, then settles with one unique value after
Raft/Serf re-sets servers with one single unique value.
This leads to flakiness, as the test will fail if assertion runs before Serf
update takes effect.
Here, we update the inital dev handling so it only adds a unique value if the
advertised and normalized values are the same.
Sample log lines illustrating the problem:
```
=== CONT TestHTTP_AgentSetServers
TestHTTP_AgentSetServers: testlog.go:34: 2020-04-06T21:47:51.016Z [INFO] nomad.raft: initial configuration: index=1 servers="[{Suffrage:Voter ID:127.0.0.1:9008 Address:127.0.0.1:9008}]"
TestHTTP_AgentSetServers: testlog.go:34: 2020-04-06T21:47:51.016Z [INFO] nomad: serf: EventMemberJoin: TestHTTP_AgentSetServers.global 127.0.0.1
TestHTTP_AgentSetServers: testlog.go:34: 2020-04-06T21:47:51.035Z [DEBUG] client.server_mgr: new server list: new_servers=[127.0.0.1:9008, 127.0.0.1:9008] old_servers=[]
...
TestHTTP_AgentSetServers: agent_endpoint_test.go:759:
Error Trace: agent_endpoint_test.go:759
http_test.go:1089
agent_endpoint_test.go:705
Error: "[127.0.0.1:9008 127.0.0.1:9008]" should have 1 item(s), but has 2
Test: TestHTTP_AgentSetServers
```
The javascript Websocket API doesn't support setting custom headers
(e.g. `X-Nomad-Token`). This change adds support for having an
authentication handshake message: clients can set `ws_handshake` URL
query parameter to true and send a single handshake message with auth
token first before any other mssage.
This is a backward compatible change: it does not affect nomad CLI path, as it
doesn't set `ws_handshake` parameter.
In some refactoring, a bug was introduced where if the connect.proxy
stanza in a submitted job was nil, the default proxy configuration
would not be initialized with default values, effectively breaking
Connect.
connect {
sidecar_service {} # should work
}
In contrast, by setting an empty proxy stanza, the config values would
be inserted correctly.
connect {
sidecar_service {
proxy {} # workaround
}
}
This commit restores the original behavior, where having a proxy
stanza present is not required.
The unit test for this case has also been corrected.
Part of #6120
Building on the support for enabling connect proxy paths in #7323, this change
adds the ability to configure the 'service.check.expose' flag on group-level
service check definitions for services that are connect-enabled. This is a slight
deviation from the "magic" that Consul provides. With Consul, the 'expose' flag
exists on the connect.proxy stanza, which will then auto-generate expose paths
for every HTTP and gRPC service check associated with that connect-enabled
service.
A first attempt at providing similar magic for Nomad's Consul Connect integration
followed that pattern exactly, as seen in #7396. However, on reviewing the PR
we realized having the `expose` flag on the proxy stanza inseperably ties together
the automatic path generation with every HTTP/gRPC defined on the service. This
makes sense in Consul's context, because a service definition is reasonably
associated with a single "task". With Nomad's group level service definitions
however, there is a reasonable expectation that a service definition is more
abstractly representative of multiple services within the task group. In this
case, one would want to define checks of that service which concretely make HTTP
or gRPC requests to different underlying tasks. Such a model is not possible
with the course `proxy.expose` flag.
Instead, we now have the flag made available within the check definitions themselves.
By making the expose feature resolute to each check, it is possible to have
some HTTP/gRPC checks which make use of the envoy exposed paths, as well as
some HTTP/gRPC checks which make use of some orthongonal port-mapping to do
checks on some other task (or even some other bound port of the same task)
within the task group.
Given this example,
group "server-group" {
network {
mode = "bridge"
port "forchecks" {
to = -1
}
}
service {
name = "myserver"
port = 2000
connect {
sidecar_service {
}
}
check {
name = "mycheck-myserver"
type = "http"
port = "forchecks"
interval = "3s"
timeout = "2s"
method = "GET"
path = "/classic/responder/health"
expose = true
}
}
}
Nomad will automatically inject (via job endpoint mutator) the
extrapolated expose path configuration, i.e.
expose {
path {
path = "/classic/responder/health"
protocol = "http"
local_path_port = 2000
listener_port = "forchecks"
}
}
Documentation is coming in #7440 (needs updating, doing next)
Modifications to the `countdash` examples in https://github.com/hashicorp/demo-consul-101/pull/6
which will make the examples in the documentation actually runnable.
Will add some e2e tests based on the above when it becomes available.
