Some operators use very long group/task `shutdown_delay` settings to
safely drain network connections to their workloads after service
deregistration. But during incident response, they may want to cause
that drain to be skipped so they can quickly shed load.
Provide a `-no-shutdown-delay` flag on the `nomad alloc stop` and
`nomad job stop` commands that bypasses the delay. This sets a new
desired transition state on the affected allocations that the
allocation/task runner will identify during pre-kill on the client.
Note (as documented here) that using this flag will almost always
result in failed inbound network connections for workloads as the
tasks will exit before clients receive updated service discovery
information and won't be gracefully drained.
During incident response, operators may find that automated processes
elsewhere in the organization can be generating new workloads on Nomad
clusters that are unable to handle the workload. This changeset adds a
field to the `SchedulerConfiguration` API that causes all job
registration calls to be rejected unless the request has a management
ACL token.
This change modifies the Nomad job register and deregister RPCs to
accept an updated option set which includes eval priority. This
param is optional and override the use of the job priority to set
the eval priority.
In order to ensure all evaluations as a result of the request use
the same eval priority, the priority is shared to the
allocReconciler and deploymentWatcher. This creates a new
distinction between eval priority and job priority.
The Nomad agent HTTP API has been modified to allow setting the
eval priority on job update and delete. To keep consistency with
the current v1 API, job update accepts this as a payload param;
job delete accepts this as a query param.
Any user supplied value is validated within the agent HTTP handler
removing the need to pass invalid requests to the server.
The register and deregister opts functions now all for setting
the eval priority on requests.
The change includes a small change to the DeregisterOpts function
which handles nil opts. This brings the function inline with the
RegisterOpts.
Previously when creating an eval for job deregistration, the eval
priority was set to the default value irregardless of the job
priority. In situations where an operator would want to deregister
a high priority job so they could re-register; the evaluation may
get blocked for some time on a busy cluster because of the
deregsiter priority.
If a job had a lower than default priority and was deregistered,
the deregister eval would get a priority higher than that of the
job. If we attempted to register another job with a higher
priority than this, but still below the default, the deregister
would be actioned before the register.
Both situations described above seem incorrect and unexpected from
a user prespective.
This fix modifies to behaviour to set the deregister eval priority
to that of the job, if available. Otherwise the default value is
still used.
This PR fixes the Nomad Object Namespace <-> Consul ACL Token relationship
check when using Consul OSS (or Consul ENT without namespace support).
Nomad v1.1.0 introduced a regression where Nomad would fail the validation
when submitting Connect jobs and allow_unauthenticated set to true, with
Consul OSS - because it would do the namespace check against the Consul ACL
token assuming the "default" namespace, which does not work because Consul OSS
does not have namespaces.
Instead of making the bad assumption, expand the namespace check to handle
each special case explicitly.
Fixes#10718
Cluster operators want to have better control over memory
oversubscription and may want to enable/disable it based on their
experience.
This PR adds a scheduler configuration field to control memory
oversubscription. It's additional field that can be set in the [API via Scheduler Config](https://www.nomadproject.io/api-docs/operator/scheduler), or [the agent server config](https://www.nomadproject.io/docs/configuration/server#configuring-scheduler-config).
I opted to have the memory oversubscription be an opt-in, but happy to change it. To enable it, operators should call the API with:
```json
{
"MemoryOversubscriptionEnabled": true
}
```
If memory oversubscription is disabled, submitting jobs specifying `memory_max` will get a "Memory oversubscription is not
enabled" warnings, but the jobs will be accepted without them accessing
the additional memory.
The warning message is like:
```
$ nomad job run /tmp/j
Job Warnings:
1 warning(s):
* Memory oversubscription is not enabled; Task cache.redis memory_max value will be ignored
==> Monitoring evaluation "7c444157"
Evaluation triggered by job "example"
==> Monitoring evaluation "7c444157"
Evaluation within deployment: "9d826f13"
Allocation "aa5c3cad" created: node "9272088e", group "cache"
Evaluation status changed: "pending" -> "complete"
==> Evaluation "7c444157" finished with status "complete"
# then you can examine the Alloc AllocatedResources to validate whether the task is allowed to exceed memory:
$ nomad alloc status -json aa5c3cad | jq '.AllocatedResources.Tasks["redis"].Memory'
{
"MemoryMB": 256,
"MemoryMaxMB": 0
}
```
Add Namespace as a top-level field in `/v1/jobs` stub.
The `/v1/jobs` endpoint already includes the namespace under `JobSummary`, though the API is odd, as typically the job ID and Namespace are in the same level, and the oddity complicates the UI frontend development.
The downside of adding it is redundant field, that makes the response body a bit bigger, specially for clusters with large jobs. Though, it should compress nicely and I expect the overhead to be small to overall response size. The benefit of a cleaner and more consistent API seem worth it.
Fixes#10431
This PR adds the common OSS changes for adding support for Consul Namespaces,
which is going to be a Nomad Enterprise feature. There is no new functionality
provided by this changeset and hopefully no new bugs.
The expose handler hook must handle if the submitted job is invalid. Without this validation, the rpc handler panics on invalid input.
Co-authored-by: Tim Gross <tgross@hashicorp.com>
This PR enables job submitters to use interpolation in the connect
block of jobs making use of consul connect. Before, only the name of
the connect service would be interpolated, and only for a few select
identifiers related to the job itself (#6853). Now, all connect fields
can be interpolated using the full spectrum of runtime parameters.
Note that the service name is interpolated at job-submission time,
and cannot make use of values known only at runtime.
Fixes#7221
* upsertaclpolicies
* delete acl policies msgtype
* upsert acl policies msgtype
* delete acl tokens msgtype
* acl bootstrap msgtype
wip unsubscribe on token delete
test that subscriptions are closed after an ACL token has been deleted
Start writing policyupdated test
* update test to use before/after policy
* add SubscribeWithACLCheck to run acl checks on subscribe
* update rpc endpoint to use broker acl check
* Add and use subscriptions.closeSubscriptionFunc
This fixes the issue of not being able to defer unlocking the mutex on
the event broker in the for loop.
handle acl policy updates
* rpc endpoint test for terminating acl change
* add comments
Co-authored-by: Kris Hicks <khicks@hashicorp.com>
* use msgtype in upsert node
adds message type to signature for upsert node, update tests, remove placeholder method
* UpsertAllocs msg type test setup
* use upsertallocs with msg type in signature
update test usage of delete node
delete placeholder msgtype method
* add msgtype to upsert evals signature, update test call sites with test setup msg type
handle snapshot upsert eval outside of FSM and ignore eval event
remove placeholder upsertevalsmsgtype
handle job plan rpc and prevent event creation for plan
msgtype cleanup upsertnodeevents
updatenodedrain msgtype
msg type 0 is a node registration event, so set the default to the ignore type
* fix named import
* fix signature ordering on upsertnode to match
When defining a script-check in a group-level service, Nomad needs to
know which task is associated with the check so that it can use the
correct task driver to execute the check.
This PR fixes two bugs:
1) validate service.task or service.check.task is configured
2) make service.check.task inherit service.task if it is itself unset
Fixes#8952
This PR adds initial support for running Consul Connect Ingress Gateways (CIGs) in Nomad. These gateways are declared as part of a task group level service definition within the connect stanza.
```hcl
service {
connect {
gateway {
proxy {
// envoy proxy configuration
}
ingress {
// ingress-gateway configuration entry
}
}
}
}
```
A gateway can be run in `bridge` or `host` networking mode, with the caveat that host networking necessitates manually specifying the Envoy admin listener (which cannot be disabled) via the service port value.
Currently Envoy is the only supported gateway implementation in Consul, and Nomad only supports running Envoy as a gateway using the docker driver.
Aims to address #8294 and tangentially #8647
Fixes https://github.com/hashicorp/nomad/issues/8544
This PR fixes a bug where using `nomad job plan ...` always report no change if the submitted job contain scaling.
The issue has three contributing factors:
1. The plan endpoint doesn't populate the required scaling policy ID; unlike the job register endpoint
2. The plan endpoint suppresses errors on job insertion - the job insertion fails here, because the scaling policy is missing the required ID
3. The scheduler reports no update necessary when the relevant job isn't in store (because the insertion failed)
This PR fixes the first two factors. Changing the scheduler to be more strict might make sense, but may violate some idempotency invariant or make the scheduler more brittle.
adds in oss components to support enterprise multi-vault namespace feature
upgrade specific doc on vault multi-namespaces
vault docs
update test to reflect new error
This fixes a bug where jobs may get "stuck" unprocessed that
dispropotionately affect periodic jobs around leadership transitions.
When registering a job, the job registration and the eval to process it
get applied to raft as two separate transactions; if the job
registration succeeds but eval application fails, the job may remain
unprocessed. Operators may detect such failure, when submitting a job
update and get a 500 error code, and they could retry; periodic jobs
failures are more likely to go unnoticed, and no further periodic
invocations will be processed until an operator force evaluation.
This fixes the issue by ensuring that the job registration and eval
application get persisted and processed atomically in the same raft log
entry.
Also, applies the same change to ensure atomicity in job deregistration.
Backward Compatibility
We must maintain compatibility in two scenarios: mixed clusters where a
leader can handle atomic updates but followers cannot, and a recent
cluster processes old log entries from legacy or mixed cluster mode.
To handle this constraints: ensure that the leader continue to emit the
Evaluation log entry until all servers have upgraded; also, when
processing raft logs, the servers honor evaluations found in both spots,
the Eval in job (de-)registration and the eval update entries.
When an updated server sees mix-mode behavior where an eval is inserted
into the raft log twice, it ignores the second instance.
I made one compromise in consistency in the mixed-mode scenario: servers
may disagree on the eval.CreateIndex value: the leader and updated
servers will report the job registration index while old servers will
report the index of the eval update log entry. This discripency doesn't
seem to be material - it's the eval.JobModifyIndex that matters.
Allow a `/v1/jobs?all_namespaces=true` to list all jobs across all
namespaces. The returned list is to contain a `Namespace` field
indicating the job namespace.
If ACL is enabled, the request token needs to be a management token or
have `namespace:list-jobs` capability on all existing namespaces.
An operator could submit a scale request including a negative count
value. This negative value caused the Nomad server to panic. The
fix adds validation to the submitted count, returning an error to
the caller if it is negative.
* nomad/state/state_store: error message copy/paste error
* nomad/structs/structs: add a VolumeEval to the JobDeregisterResponse
* nomad/job_endpoint: synchronously, volumeClaimReap on job Deregister
* nomad/core_sched: make volumeClaimReap available without a CoreSched
* nomad/job_endpoint: Deregister return early if the job is missing
* nomad/job_endpoint_test: job Deregistion is idempotent
* nomad/core_sched: conditionally ignore alloc status in volumeClaimReap
* nomad/job_endpoint: volumeClaimReap all allocations, even running
* nomad/core_sched_test: extra argument to collectClaimsToGCImpl
* nomad/job_endpoint: job deregistration is not idempotent
Conor Evans