When a Nomad agent starts and loads jobs that already existed in the
cluster, the default template uid and gid was being set to 0, since this
is the zero value for int. This caused these jobs to fail in
environments where it was not possible to use 0, such as in Windows
clients.
In order to differentiate between an explicit 0 and a template where
these properties were not set we need to use a pointer.
This PR updates the checks documentation to mention support for checks
when using the Nomad service provider. There are limitations of NSD
compared to Consul, and those configuration options are now noted as
being Consul-only.
UID/GID 0 is usually reserved for the root user/group. While Nomad
clients are expected to run as root it may not always be the case.
Setting these values as -1 if not defined will fallback to the pervious
behaviour of not attempting to set file ownership and use whatever
UID/GID the Nomad agent is running as. It will also keep backwards
compatibility, which is specially important for platforms where this
feature is not supported, like Windows.
* Allow specification of CSI staging and publishing directory path
* Add website documentation for stage_publish_dir
* Replace erroneous reference to csi_plugin.mount_config with csi_plugin.mount_dir
* Avoid requiring CSI plugins to be redeployed after introducing StagePublishDir
This PR creates a top-level 'check' page for job-specification docs.
The content for checks is about half the content of the service page, and
is about to increase in size when we add docs about Nomad service checks.
Seemed like a good idea to just split the checks section out into its own
thing (e.g. check_restart is already a topic).
Doing the move first lets us backport this change without adding Nomad service
check stuff yet.
Mostly just a lift-and-shift but with some tweaked examples to de-emphasize
the use of script checks.
Fix numerous go-getter security issues:
- Add timeouts to http, git, and hg operations to prevent DoS
- Add size limit to http to prevent resource exhaustion
- Disable following symlinks in both artifacts and `job run`
- Stop performing initial HEAD request to avoid file corruption on
retries and DoS opportunities.
**Approach**
Since Nomad has no ability to differentiate a DoS-via-large-artifact vs
a legitimate workload, all of the new limits are configurable at the
client agent level.
The max size of HTTP downloads is also exposed as a node attribute so
that if some workloads have large artifacts they can specify a high
limit in their jobspecs.
In the future all of this plumbing could be extended to enable/disable
specific getters or artifact downloading entirely on a per-node basis.
Nomad errors out when attempting to specify a task for a service that uses consul connect but does not have script or gRPC checks. See 304d0cf595/nomad/structs/structs.go (L6643) for details.
Closes#12927Closes#12958
This PR updates the version of redis used in our examples from 3.2 to 7.
The old version is very not supported anymore, and we should be setting
a good example by using a supported version.
The long-form example job is now fixed so that the service stanza uses
nomad as the service discovery provider, and so now the job runs without
a requirement of having Consul running and configured.
* docs: update json jobs docs
Did you know that Nomad has not 1 but 2 JSON formats for jobs? 2½ if you
want to acknowledge that sometimes our JSON job representations have a
Job top-level wrapper and sometimes do not.
The 2½ formats are:
```
1. HCL JSON
2. Input API JSON (top-level Job field)
2.5. Output API JSON (lacks top-level Job field)
```
`#2` is what our docs consider our API JSON. `#2.5` seems to be an
accident of history we can't fix with breaking API compatibility.
`#1` is an even more interesting accident of history: the `jobspec2`
package automatically detects if the input to Parse is JSON and switches
to a JSON parser. This behavior is undocumented, the format is
unspecified, and there is no official HashiCorp tooling to produce this
JSON from HCL. The plot thickens when you discover popular third party
tools like hcl2json.com and https://github.com/tmccombs/hcl2json seem to
produce JSON that `nomad run` accepts!
Since we have no telemetry around whether or not anyone passes HCL JSON
to `nomad run`, and people don't file bugs around features that Just
Work, I'm choosing to leave that code path in place and *acknowledged
but not suggested* in documentation.
See https://github.com/hashicorp/hcl/issues/498 for a more comprehensive
discussion of what officially supporting HCL JSON in Nomad would look
like.
(I also added some of the missing fields to the (Input API flavor) JSON
Job documentation, but it still needs a lot of work to be
comprehensive.)
Co-authored-by: Tim Gross <tgross@hashicorp.com>
After a more detailed analysis of this feature, the approach taken in
PR #12449 was found to be not ideal due to poor UX (users are
responsible for setting the entity alias they would like to use) and
issues around jobs potentially masquerading itself as another Vault
entity.
This PR introduces the `address` field in the `service` block so that Nomad
or Consul services can be registered with a custom `.Address.` to advertise.
The address can be an IP address or domain name. If the `address` field is
set, the `service.address_mode` must be set in `auto` mode.
Custom variable validation is a useful feature that is supported by
Nomad and not just Terraform. As such it should be documented on the
input variable page.
I've cribbed the content from the terraform docs so this should be
consistent across projects
Move some common Vault API data struct decoding out of the Vault client
so it can be reused in other situations.
Make Vault job validation its own function so it's easier to expand it.
Rename the `Job.VaultPolicies` method to just `Job.Vault` since it
returns the full Vault block, not just their policies.
Set `ChangeMode` on `Vault.Canonicalize`.
Add some missing tests.
Allows specifying an entity alias that will be used by Nomad when
deriving the task Vault token.
An entity alias assigns an indentity to a token, allowing better control
and management of Vault clients since all tokens with the same indentity
alias will now be considered the same client. This helps track Nomad
activity in Vault's audit logs and better control over Vault billing.
Add support for a new Nomad server configuration to define a default
entity alias to be used when deriving Vault tokens. This default value
will be used if the task doesn't have an entity alias defined.
Clarify the behavior of `restart` inheritance with respect to Connect
sidecar tasks. Remove incorrect language about the scheduler being
involved in restart decisions. Try to make the `delay` mode
documentation more clear, and provide examples of delay vs fail.
This PR exposes the following existing`consul-template` configuration options to Nomad jobspec authors in the `{job.group.task.template}` stanza.
- `wait`
It also exposes the following`consul-template` configuration to Nomad operators in the `{client.template}` stanza.
- `max_stale`
- `block_query_wait`
- `consul_retry`
- `vault_retry`
- `wait`
Finally, it adds the following new Nomad-specific configuration to the `{client.template}` stanza that allows Operators to set bounds on what `jobspec` authors configure.
- `wait_bounds`
Co-authored-by: Tim Gross <tgross@hashicorp.com>
Co-authored-by: Michael Schurter <mschurter@hashicorp.com>
When the scheduler picks a node for each evaluation, the
`LimitIterator` provides at most 2 eligible nodes for the
`MaxScoreIterator` to choose from. This keeps scheduling fast while
producing acceptable results because the results are binpacked.
Jobs with a `spread` block (or node affinity) remove this limit in
order to produce correct spread scoring. This means that every
allocation within a job with a `spread` block is evaluated against
_all_ eligible nodes. Operators of large clusters have reported that
jobs with `spread` blocks that are eligible on a large number of nodes
can take longer than the nack timeout to evaluate (60s). Typical
evaluations are processed in milliseconds.
In practice, it's not necessary to evaluate every eligible node for
every allocation on large clusters, because the `RandomIterator` at
the base of the scheduler stack produces enough variation in each pass
that the likelihood of an uneven spread is negligible. Note that
feasibility is checked before the limit, so this only impacts the
number of _eligible_ nodes available for scoring, not the total number
of nodes.
This changeset sets the iterator limit for "large" `spread` block and
node affinity jobs to be equal to the number of desired
allocations. This brings an example problematic job evaluation down
from ~3min to ~10s. The included tests ensure that we have acceptable
spread results across a variety of large cluster topologies.
* Mesh Gateway doc enhancements
1. I believe this line should be corrected to add mesh as one of the choices
2. I found that we are not setting this meta, and it is a required element for wan federation. I believe it would be helpful and potentially time saving to note that right here.
Update the ingress gateway documentation to remove the note stating
that a port must be specified for values in the `hosts` field when
the ingress gateway is listening on a non-standard HTTP port.
Specifying a port was required in Consul 1.8.0, but that requirement
was removed in 1.8.1 with hashicorp/consul#8190 which made Consul
include the port number when constructing the Envoy configuration.
Related Consul docs PR: hashicorp/consul#10827
Using `bridge` networking requires that you have CNI plugins installed
on the client, but this isn't in the jobspec `network` docs which are
the first place someone will look when trying to configure task
networking.
This PR implements a new "System Batch" scheduler type. Jobs can
make use of this new scheduler by setting their type to 'sysbatch'.
Like the name implies, sysbatch can be thought of as a hybrid between
system and batch jobs - it is for running short lived jobs intended to
run on every compatible node in the cluster.
As with batch jobs, sysbatch jobs can also be periodic and/or parameterized
dispatch jobs. A sysbatch job is considered complete when it has been run
on all compatible nodes until reaching a terminal state (success or failed
on retries).
Feasibility and preemption are governed the same as with system jobs. In
this PR, the update stanza is not yet supported. The update stanza is sill
limited in functionality for the underlying system scheduler, and is
not useful yet for sysbatch jobs. Further work in #4740 will improve
support for the update stanza and deployments.
Closes#2527
Current efs driver does not support telling it if its a `node` or a `controller`, and it will not print any error it will just ignore all other parameters then:(
So this will result in endpoint being `/tmp/csi.sock` and not `/csi/csi.sock` which will in turn break nomad/csi integration.
Also I changed the latest image tag to v1.3.2 to make sure anybody copy pasting this example is sure that it will work.
Tested on nomad 1.1.2
This PR fixes the API to _not_ set the default mesh gateway mode. Before,
the mode would be set to "none" in Canonicalize, which is incorrect. We
should pass through the empty string so that folks can make use of Consul
service-defaults Config entries to configure the default mode.
This PR implements first-class support for Nomad running Consul
Connect Mesh Gateways. Mesh gateways enable services in the Connect
mesh to make cross-DC connections via gateways, where each datacenter
may not have full node interconnectivity.
Consul docs with more information:
https://www.consul.io/docs/connect/gateways/mesh-gateway
The following group level service block can be used to establish
a Connect mesh gateway.
service {
connect {
gateway {
mesh {
// no configuration
}
}
}
}
Services can make use of a mesh gateway by configuring so in their
upstream blocks, e.g.
service {
connect {
sidecar_service {
proxy {
upstreams {
destination_name = "<service>"
local_bind_port = <port>
datacenter = "<datacenter>"
mesh_gateway {
mode = "<mode>"
}
}
}
}
}
}
Typical use of a mesh gateway is to create a bridge between datacenters.
A mesh gateway should then be configured with a service port that is
mapped from a host_network configured on a WAN interface in Nomad agent
config, e.g.
client {
host_network "public" {
interface = "eth1"
}
}
Create a port mapping in the group.network block for use by the mesh
gateway service from the public host_network, e.g.
network {
mode = "bridge"
port "mesh_wan" {
host_network = "public"
}
}
Use this port label for the service.port of the mesh gateway, e.g.
service {
name = "mesh-gateway"
port = "mesh_wan"
connect {
gateway {
mesh {}
}
}
}
Currently Envoy is the only supported gateway implementation in Consul.
By default Nomad client will run the latest official Envoy docker image
supported by the local Consul agent. The Envoy task can be customized
by setting `meta.connect.gateway_image` in agent config or by setting
the `connect.sidecar_task` block.
Gateways require Consul 1.8.0+, enforced by the Nomad scheduler.
Closes#9446
