The `nomad operator raft logs` command uses a raft helper that reads
in the logs from raft and serializes them to JSON. The previous
implementation returned the slice of all logs and then serializes the
entire object. Update the helper to stream the log entries and then
serialize them as newline-delimited JSON.
The `nomad operator raft` and `nomad operator snapshot state`
subcommands for inspecting on-disk raft state were hidden and
undocumented. Expose and document these so that advanced operators
have support for these tools.
Use the new filtering and pagination capabilities of the `Eval.List`
RPC to provide filtering and pagination at the command line.
Also includes note that `nomad eval status -json` is deprecated and
will be replaced with a single evaluation view in a future version of
Nomad.
When a cluster doesn't have a leader, the `nomad operator debug`
command can safely use stale queries to gracefully degrade the
consistency of almost all its queries. The query parameter for these
API calls was not being set by the command.
Some `api` package queries do not include `QueryOptions` because
they target a specific agent, but they can potentially be forwarded to
other agents. If there is no leader, these forwarded queries will
fail. Provide methods to call these APIs with `QueryOptions`.
Some operators use very long group/task `shutdown_delay` settings to
safely drain network connections to their workloads after service
deregistration. But during incident response, they may want to cause
that drain to be skipped so they can quickly shed load.
Provide a `-no-shutdown-delay` flag on the `nomad alloc stop` and
`nomad job stop` commands that bypasses the delay. This sets a new
desired transition state on the affected allocations that the
allocation/task runner will identify during pre-kill on the client.
Note (as documented here) that using this flag will almost always
result in failed inbound network connections for workloads as the
tasks will exit before clients receive updated service discovery
information and won't be gracefully drained.
API queries can request pagination using the `NextToken` and `PerPage`
fields of `QueryOptions`, when supported by the underlying API.
Add a `NextToken` field to the `structs.QueryMeta` so that we have a
common field across RPCs to tell the caller where to resume paging
from on their next API call. Include this field on the `api.QueryMeta`
as well so that it's available for future versions of List HTTP APIs
that wrap the response with `QueryMeta` rather than returning a simple
list of structs. In the meantime callers can get the `X-Nomad-NextToken`.
Add pagination to the `Eval.List` RPC by checking for pagination token
and page size in `QueryOptions`. This will allow resuming from the
last ID seen so long as the query parameters and the state store
itself are unchanged between requests.
Add filtering by job ID or evaluation status over the results we get
out of the state store.
Parse the query parameters of the `Eval.List` API into the arguments
expected for filtering in the RPC call.
During incident response, operators may find that automated processes
elsewhere in the organization can be generating new workloads on Nomad
clusters that are unable to handle the workload. This changeset adds a
field to the `SchedulerConfiguration` API that causes all job
registration calls to be rejected unless the request has a management
ACL token.
* Override TLS flags individually for meta commands
* Update command/meta.go
Co-authored-by: Tim Gross <tgross@hashicorp.com>
Co-authored-by: Tim Gross <tgross@hashicorp.com>
The `TestHTTPServer_Limits_Error` test never starts the agent so it
had an incomplete configuration, which caused panics in the test. Fix
the configuration.
The PR #11555 had a branch name like `f-ui-*` which caused CI to skip
the unit tests over the HTTP handler setup, so this wasn't caught in
PR review.
This change modifies the Nomad job register and deregister RPCs to
accept an updated option set which includes eval priority. This
param is optional and override the use of the job priority to set
the eval priority.
In order to ensure all evaluations as a result of the request use
the same eval priority, the priority is shared to the
allocReconciler and deploymentWatcher. This creates a new
distinction between eval priority and job priority.
The Nomad agent HTTP API has been modified to allow setting the
eval priority on job update and delete. To keep consistency with
the current v1 API, job update accepts this as a payload param;
job delete accepts this as a query param.
Any user supplied value is validated within the agent HTTP handler
removing the need to pass invalid requests to the server.
The register and deregister opts functions now all for setting
the eval priority on requests.
The change includes a small change to the DeregisterOpts function
which handles nil opts. This brings the function inline with the
RegisterOpts.
* api: return 404 for alloc FS list/stat endpoints
If the alloc filesystem doesn't have a file requested by the List
Files or Stat File API, we currently return a HTTP 500 error with the
expected "file not found" error message. Return a HTTP 404 error
instead.
* update FS Handler
Previously the FS handler would interpret a 500 status as a 404
in the adapter layer by checking if the response body contained
the text or is the response status
was 500 and then throw an error code for 404.
Co-authored-by: Jai Bhagat <jaybhagat841@gmail.com>
* debug: refactor Consul API collection
* debug: refactor Vault API collection
* debug: cleanup test timing
* debug: extend test to multiregion
* debug: save cmdline flags in bundle
* debug: add cli version to output
* Add changelog entry
Enhance the CLI in order to return the host network in two flavors
(default, verbose) of the `node status` command.
Fixes: #11223.
Signed-off-by: Alessandro De Blasis <alex@deblasis.net>
- Making RPC Upgrade mode reloadable.
- Add suggestions from code review
- remove spurious comment
- switch to require(t,...) form for test.
- Add to changelog
Log the failure error when the agent fails to start. Previously, the
agent startup failure error would be emitted to the command UI but not
logged. So it doesn't get emitted to syslog or `log_file` if they are
set, and it makes debugging much harder. Also, logging the error again
before exit makes the error more visible: previously, the operator
needed to scroll to the top to find the error.
On a sample failure, the output will look like:
```
==> WARNING: Bootstrap mode enabled! Potentially unsafe operation.
==> Loaded configuration from sample-configs/config-bad
==> Starting Nomad agent...
==> Error starting agent: setting up server node ID failed: mkdir /path-without-permission: read-only file system
2021-10-20T14:38:51.179-0400 [WARN] agent.plugin_loader: skipping external plugins since plugin_dir doesn't exist: plugin_dir=/path-without-permission/plugins
2021-10-20T14:38:51.181-0400 [DEBUG] agent.plugin_loader.docker: using client connection initialized from environment: plugin_dir=/path-without-permission/plugins
2021-10-20T14:38:51.181-0400 [DEBUG] agent.plugin_loader.docker: using client connection initialized from environment: plugin_dir=/path-without-permission/plugins
2021-10-20T14:38:51.181-0400 [INFO] agent: detected plugin: name=java type=driver plugin_version=0.1.0
2021-10-20T14:38:51.181-0400 [INFO] agent: detected plugin: name=docker type=driver plugin_version=0.1.0
2021-10-20T14:38:51.181-0400 [INFO] agent: detected plugin: name=mock_driver type=driver plugin_version=0.1.0
2021-10-20T14:38:51.181-0400 [INFO] agent: detected plugin: name=raw_exec type=driver plugin_version=0.1.0
2021-10-20T14:38:51.181-0400 [INFO] agent: detected plugin: name=exec type=driver plugin_version=0.1.0
2021-10-20T14:38:51.181-0400 [INFO] agent: detected plugin: name=qemu type=driver plugin_version=0.1.0
2021-10-20T14:38:51.181-0400 [ERROR] agent: error starting agent: error="setting up server node ID failed: mkdir /path-without-permission: read-only file system"
```
This change adds the final `ERROR` message. It's easy to miss the `==>
Error starting agent` above.
Fixes#2522
Skip embedding client.alloc_dir when building chroot. If a user
configures a Nomad client agent so that the chroot_env will embed the
client.alloc_dir, Nomad will happily infinitely recurse while building
the chroot until something horrible happens. The best case scenario is
the filesystem's path length limit is hit. The worst case scenario is
disk space is exhausted.
A bad agent configuration will look something like this:
```hcl
data_dir = "/tmp/nomad-badagent"
client {
enabled = true
chroot_env {
# Note that the source matches the data_dir
"/tmp/nomad-badagent" = "/ohno"
# ...
}
}
```
Note that `/ohno/client` (the state_dir) will still be created but not
`/ohno/alloc` (the alloc_dir).
While I cannot think of a good reason why someone would want to embed
Nomad's client (and possibly server) directories in chroots, there
should be no cause for harm. chroots are only built when Nomad runs as
root, and Nomad disables running exec jobs as root by default. Therefore
even if client state is copied into chroots, it will be inaccessible to
tasks.
Skipping the `data_dir` and `{client,server}.state_dir` is possible, but
this PR attempts to implement the minimum viable solution to reduce risk
of unintended side effects or bugs.
When running tests as root in a vm without the fix, the following error
occurs:
```
=== RUN TestAllocDir_SkipAllocDir
alloc_dir_test.go:520:
Error Trace: alloc_dir_test.go:520
Error: Received unexpected error:
Couldn't create destination file /tmp/TestAllocDir_SkipAllocDir1457747331/001/nomad/test/testtask/nomad/test/testtask/.../nomad/test/testtask/secrets/.nomad-mount: open /tmp/TestAllocDir_SkipAllocDir1457747331/001/nomad/test/.../testtask/secrets/.nomad-mount: file name too long
Test: TestAllocDir_SkipAllocDir
--- FAIL: TestAllocDir_SkipAllocDir (22.76s)
```
Also removed unused Copy methods on AllocDir and TaskDir structs.
Thanks to @eveld for not letting me forget about this!
Fix a test corruption issue, where a test accidentally unsets
the `NOMAD_LICENSE` environment variable, that's relied on by some
tests.
As a habit, tests should always restore the environment variable value
on test completion. Golang 1.17 introduced
[`t.Setenv`](https://pkg.go.dev/testing#T.Setenv) to address this issue.
However, as 1.0.x and 1.1.x branches target golang 1.15 and 1.16, I
opted to use a helper function to ease backports.
* Include region and namespace in CLI output
* Add region and prefix matching for server members
* Add namespace and region API outputs to cluster metadata folder
* Add region awareness to WaitForClient helper function
* Add helper functions for SliceStringHasPrefix and StringHasPrefixInSlice
* Refactor test client agent generation
* Add tests for region
* Add changelog
FailoverHeartbeatTTL is the amount of time to wait after a server leader failure
before considering reallocating client tasks. This TTL should be fairly long as
the new server leader needs to rebuild the entire heartbeat map for the
cluster. In deployments with a small number of machines, the default TTL (5m)
may be unnecessary long. Let's allow operators to configure this value in their
config files.
James Rasell