We use capped exponential backoff in several places in the code when handling
failures. The code we've copy-and-pasted all over has a check to see if the
backoff is greater than the limit, but this check happens after the bitshift and
we always increment the number of attempts. This causes an overflow with a
fairly small number of failures (ex. at one place I tested it occurs after only
24 iterations), resulting in a negative backoff which then never recovers. The
backoff becomes a tight loop consuming resources and/or DoS'ing a Nomad RPC
handler or an external API such as Vault. Note this doesn't occur in places
where we cap the number of iterations so the loop breaks (usually to return an
error), so long as the number of iterations is reasonable.
Introduce a helper with a check on the cap before the bitshift to avoid overflow in all
places this can occur.
Fixes: #18199
Co-authored-by: stswidwinski <stan.swidwinski@gmail.com>
When claiming a CSI volume, we need to ensure the CSI node plugin is running
before we send any CSI RPCs. This extends even to the controller publish RPC
because it requires the storage provider's "external node ID" for the
client. This primarily impacts client restarts but also is a problem if the node
plugin exits (and fingerprints) while the allocation that needs a CSI volume
claim is being placed.
Unfortunately there's no mapping of volume to plugin ID available in the
jobspec, so we don't have enough information to wait on plugins until we either
get the volume from the server or retrieve the plugin ID from data we've
persisted on the client.
If we always require getting the volume from the server before making the claim,
a client restart for disconnected clients will cause all the allocations that
need CSI volumes to fail. Even while connected, checking in with the server to
verify the volume's plugin before trying to make a claim RPC is inherently racy,
so we'll leave that case as-is and it will fail the claim if the node plugin
needed to support a newly-placed allocation is flapping such that the node
fingerprint is changing.
This changeset persists a minimum subset of data about the volume and its plugin
in the client state DB, and retrieves that data during the CSI hook's prerun to
avoid re-claiming and remounting the volume unnecessarily.
This changeset also updates the RPC handler to use the external node ID from the
claim whenever it is available.
Fixes: #13028
new WaitForPlugin() called during csiHook.Prerun,
so that on startup, clients can recover running
tasks that use CSI volumes, instead of them being
terminated and rescheduled because they need a
node plugin that is "not found" *yet*, only because
the plugin task has not yet been recovered.
The allocrunner has a facility for passing data written by allocrunner hooks to
taskrunner hooks. Currently the only consumers of this facility are the
allocrunner CSI hook (which writes data) and the taskrunner volume hook (which
reads that same data).
The allocrunner hook for CSI volumes doesn't set the alloc hook resources
atomically. Instead, it gets the current resources and then writes a new version
back. Because the CSI hook is currently the only writer and all readers happen
long afterwards, this should be safe but #16623 shows there's some sequence of
events during restore where this breaks down.
Refactor hook resources so that hook data is accessed via setters and getters
that hold the mutex.
If a plugin crashes quickly enough, we can get into a situation where the
deregister function is called before it's ever registered. Safely handle the
resulting nil pointer in the dynamic registry by not emitting a plugin event,
but also update the plugin event handler to tolerate nil pointers in case we
wire it up elsewhere in the future.
* cleanup: refactor MapStringStringSliceValueSet to be cleaner
* cleanup: replace SliceStringToSet with actual set
* cleanup: replace SliceStringSubset with real set
* cleanup: replace SliceStringContains with slices.Contains
* cleanup: remove unused function SliceStringHasPrefix
* cleanup: fixup StringHasPrefixInSlice doc string
* cleanup: refactor SliceSetDisjoint to use real set
* cleanup: replace CompareSliceSetString with SliceSetEq
* cleanup: replace CompareMapStringString with maps.Equal
* cleanup: replace CopyMapStringString with CopyMap
* cleanup: replace CopyMapStringInterface with CopyMap
* cleanup: fixup more CopyMapStringString and CopyMapStringInt
* cleanup: replace CopySliceString with slices.Clone
* cleanup: remove unused CopySliceInt
* cleanup: refactor CopyMapStringSliceString to be generic as CopyMapOfSlice
* cleanup: replace CopyMap with maps.Clone
* cleanup: run go mod tidy
Log lines which include an error should use the full term "error"
as the context key. This provides consistency across the codebase
and avoids a Go style which operators might not be aware of.
* test: use `T.TempDir` to create temporary test directory
This commit replaces `ioutil.TempDir` with `t.TempDir` in tests. The
directory created by `t.TempDir` is automatically removed when the test
and all its subtests complete.
Prior to this commit, temporary directory created using `ioutil.TempDir`
needs to be removed manually by calling `os.RemoveAll`, which is omitted
in some tests. The error handling boilerplate e.g.
defer func() {
if err := os.RemoveAll(dir); err != nil {
t.Fatal(err)
}
}
is also tedious, but `t.TempDir` handles this for us nicely.
Reference: https://pkg.go.dev/testing#T.TempDir
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
* test: fix TestLogmon_Start_restart on Windows
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
* test: fix failing TestConsul_Integration
t.TempDir fails to perform the cleanup properly because the folder is
still in use
testing.go:967: TempDir RemoveAll cleanup: unlinkat /tmp/TestConsul_Integration2837567823/002/191a6f1a-5371-cf7c-da38-220fe85d10e5/web/secrets: device or resource busy
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
The plugin manager for CSI hands out instances of a plugin for callers
that need to mount a volume. The `MounterForPlugin` method accesses
the internal instances map without a lock, and can be called
concurrently from outside the plugin manager's main run-loop.
The original commit for the instances map included a warning that it
needed to be accessed only from the main loop but that comment was
unfortunately ignored shortly thereafter, so this bug has existed in
the code for a couple years without being detected until we ran tests
with `-race` in #12098. Lesson learned here: comments make for lousy
enforcement of invariants!
The dynamic plugin registry assumes that plugins are singletons, which
matches the behavior of other Nomad plugins. But because dynamic
plugins like CSI are implemented by allocations, we need to handle the
possibility of multiple allocations for a given plugin type + ID, as
well as behaviors around interleaved allocation starts and stops.
Update the data structure for the dynamic registry so that more recent
allocations take over as the instance manager singleton, but we still
preserve the previous running allocations so that restores work
without racing.
Multiple allocations can run on a client for the same plugin, even if
only during updates. Provide each plugin task a unique path for the
control socket so that the tasks don't interfere with each other.
Nomad communicates with CSI plugin tasks via gRPC. The plugin
supervisor hook uses this to ping the plugin for health checks which
it emits as task events. After the first successful health check the
plugin supervisor registers the plugin in the client's dynamic plugin
registry, which in turn creates a CSI plugin manager instance that has
its own gRPC client for fingerprinting the plugin and sending mount
requests.
If the plugin manager instance fails to connect to the plugin on its
first attempt, it exits. The plugin supervisor hook is unaware that
connection failed so long as its own pings continue to work. A
transient failure during plugin startup may mislead the plugin
supervisor hook into thinking the plugin is up (so there's no need to
restart the allocation) but no fingerprinter is started.
* Refactors the gRPC client to connect on first use. This provides the
plugin manager instance the ability to retry the gRPC client
connection until success.
* Add a 30s timeout to the plugin supervisor so that we don't poll
forever waiting for a plugin that will never come back up.
Minor improvements:
* The plugin supervisor hook creates a new gRPC client for every probe
and then throws it away. Instead, reuse the client as we do for the
plugin manager.
* The gRPC client constructor has a 1 second timeout. Clarify that this
timeout applies to the connection and not the rest of the client
lifetime.
When an allocation stops, the `csi_hook` makes an unpublish RPC to the
servers to unpublish via the CSI RPCs: first to the node plugins and
then the controller plugins. The controller RPCs must happen after the
node RPCs so that the node has had a chance to unmount the volume
before the controller tries to detach the associated device.
But the client has local access to the node plugins and can
independently determine if it's safe to send unpublish RPC to those
plugins. This will allow the server to treat the node plugin as
abandoned if a client is disconnected and `stop_on_client_disconnect`
is set. This will let the server try to send unpublish RPCs to the
controller plugins, under the assumption that the client will be
trying to unmount the volume on its end first.
Note that the CSI `NodeUnpublishVolume`/`NodeUnstageVolume` RPCs can
return ignorable errors in the case where the volume has already been
unmounted from the node. Handle all other errors by retrying until we
get success so as to give operators the opportunity to reschedule a
failed node plugin (ex. in the case where they accidentally drained a
node without `-ignore-system`). Fan-out the work for each volume into
its own goroutine so that we can release a subset of volumes if only
one is stuck.
We see this error all the time
```
no handler registered for event
event.Message=, event.Annotations=, event.Timestamp=0001-01-01T00:00:00Z, event.TaskName=, event.AllocID=, event.TaskID=,
```
So we're handling an even with all default fields. I noted that this can
happen if only err is set as in
```
func (d *driverPluginClient) handleTaskEvents(reqCtx context.Context, ch chan *TaskEvent, stream proto.Driver_TaskEventsClient) {
defer close(ch)
for {
ev, err := stream.Recv()
if err != nil {
if err != io.EOF {
ch <- &TaskEvent{
Err: grpcutils.HandleReqCtxGrpcErr(err, reqCtx, d.doneCtx),
}
}
```
In this case Err fails to be serialized by the logger, see this test
```
ev := &drivers.TaskEvent{
Err: fmt.Errorf("errz"),
}
i.logger.Warn("ben test", "event", ev)
i.logger.Warn("ben test2", "event err str", ev.Err.Error())
i.logger.Warn("ben test3", "event err", ev.Err)
ev.Err = nil
i.logger.Warn("ben test4", "nil error", ev.Err)
2021-10-06T22:37:56.736Z INFO nomad.stdout {"@level":"warn","@message":"ben test","@module":"client.driver_mgr","@timestamp":"2021-10-06T22:37:56.643900Z","driver":"mock_driver","event":{"TaskID":"","TaskName":"","AllocID":"","Timestamp":"0001-01-01T00:00:00Z","Message":"","Annotations":null,"Err":{}}}
2021-10-06T22:37:56.736Z INFO nomad.stdout {"@level":"warn","@message":"ben test2","@module":"client.driver_mgr","@timestamp":"2021-10-06T22:37:56.644226Z","driver":"mock_driver","event err str":"errz"}
2021-10-06T22:37:56.736Z INFO nomad.stdout {"@level":"warn","@message":"ben test3","@module":"client.driver_mgr","@timestamp":"2021-10-06T22:37:56.644240Z","driver":"mock_driver","event err":"errz"}
2021-10-06T22:37:56.736Z INFO nomad.stdout {"@level":"warn","@message":"ben test4","@module":"client.driver_mgr","@timestamp":"2021-10-06T22:37:56.644252Z","driver":"mock_driver","nil error":null}
```
Note in the first example err is set to an empty object and the error is
lost.
What we want is the last two examples which call out the err field
explicitly so we can see what it is in this case
Include the VolumeCapability.MountVolume data in
ControllerPublishVolume, CreateVolume, and ValidateVolumeCapabilities
RPCs sent to the CSI controller. The previous behavior was to only
include the MountVolume capability in the NodeStageVolume request, which
on some CSI implementations would be rejected since the Volume was not
originally provisioned with the specific mount capabilities requested.
Registration of Nomad volumes previously allowed for a single volume
capability (access mode + attachment mode pair). The recent `volume create`
command requires that we pass a list of requested capabilities, but the
existing workflow for claiming volumes and attaching them on the client
assumed that the volume's single capability was correct and unchanging.
Add `AccessMode` and `AttachmentMode` to `CSIVolumeClaim`, use these fields to
set the initial claim value, and add backwards compatibility logic to handle
the existing volumes that already have claims without these fields.
In order to support new node RPCs, we need to fingerprint plugin capabilities
in more detail. This changeset mirrors recent work to fingerprint controller
capabilities, but is not yet in use by any Nomad RPC.
In order to support new controller RPCs, we need to fingerprint volume
capabilities in more detail and perform controller RPCs only when the specific
capability is present. This fixes a bug in Ceph support where the plugin can
only suport create/delete but we assume that it also supports attach/detach.
When the client-side actions of a CSI client RPC succeed but we get
disconnected during the RPC or we fail to checkpoint the claim state, we want
to be able to retry the client RPC without getting blocked by the client-side
state (ex. mount points) already having been cleaned up in previous calls.
The NodePublish workflow currently creates the target path and its parent
directory. However, the CSI specification says that the CO shall ensure the
parent directory of the target path exists, and that the SP shall place the
block device or mounted directory at the target path. Much of our testing has
been with CSI plugins that are more forgiving, but our behavior breaks
spec-compliant CSI plugins.
This changeset ensures we only create the parent directory.
In #7957 we added support for passing a volume context to the controller RPCs.
This is an opaque map that's created by `CreateVolume` or, in Nomad's case,
in the volume registration spec.
However, we missed passing this field to the `NodeStage` and `NodePublish` RPC,
which prevents certain plugins (such as MooseFS) from making node RPCs.
This fixes few cases where driver eventor goroutines are leaked during
normal operations, but especially so in tests.
This change makes few modifications:
First, it switches drivers to use `Context`s to manage shutdown events.
Previously, it relied on callers invoking `.Shutdown()` function that is
specific to internal drivers only and require casting. Using `Contexts`
provide a consistent idiomatic way to manage lifecycle for both internal
and external drivers.
Also, I discovered few places where we don't clean up a temporary driver
instance in the plugin catalog code, where we dispense a driver to
inspect and validate the schema config without properly cleaning it up.
The CSI plugins RPCs require the use of the storage provider's volume
ID, rather than the user-defined volume ID. Although changing the RPCs
to use the field name `ExternalID` risks breaking backwards
compatibility, we can use the `ExternalID` name internally for the
client and only use `VolumeID` at the RPC boundaries.
CSI plugins can require credentials for some publishing and
unpublishing workflow RPCs. Secrets are configured at the time of
volume registration, stored in the volume struct, and then passed
around as an opaque map by Nomad to the plugins.
Adds a `CSIVolumeClaim` type to be tracked as current and past claims
on a volume. Allows for a client RPC failure during node or controller
detachment without having to keep the allocation around after the
first garbage collection eval.
This changeset lays groundwork for moving the actual detachment RPCs
into a volume watching loop outside the GC eval.
The CSI plugins uses the external volume ID for all operations, but
the Client CSI RPCs uses the Nomad volume ID (human-friendly) for the
mount paths. Pass the External ID as an arg in the RPC call so that
the unpublish workflows have it without calling back to the server to
find the external ID.
The controller CSI plugins need the CSI node ID (or in other words,
the storage provider's view of node ID like the EC2 instance ID), not
the Nomad node ID, to determine how to detach the external volume.
If a volume-claiming alloc stops and the CSI Node plugin that serves
that alloc's volumes is missing, there's no way for the allocrunner
hook to send the `NodeUnpublish` and `NodeUnstage` RPCs.
This changeset addresses this issue with a redesign of the client-side
for CSI. Rather than unmounting in the alloc runner hook, the alloc
runner hook will simply exit. When the server gets the
`Node.UpdateAlloc` for the terminal allocation that had a volume claim,
it creates a volume claim GC job. This job will made client RPCs to a
new node plugin RPC endpoint, and only once that succeeds, move on to
making the client RPCs to the controller plugin. If the node plugin is
unavailable, the GC job will fail and be requeued.
* nomad/structs/structs: new NodeEventSubsystemCSI
* client/client: pass triggerNodeEvent in the CSIConfig
* client/pluginmanager/csimanager/instance: add eventer to instanceManager
* client/pluginmanager/csimanager/manager: pass triggerNodeEvent
* client/pluginmanager/csimanager/volume: node event on [un]mount
* nomad/structs/structs: use storage, not CSI
* client/pluginmanager/csimanager/volume: use storage, not CSI
* client/pluginmanager/csimanager/volume_test: eventer
* client/pluginmanager/csimanager/volume: event on error
* client/pluginmanager/csimanager/volume_test: check event on error
* command/node_status: remove an extra space in event detail format
* client/pluginmanager/csimanager/volume: use snake_case for details
* client/pluginmanager/csimanager/volume_test: snake_case details
The CSI Specification defines various gRPC Errors and how they may be retried. After auditing all our CSI RPC calls in #6863, this changeset:
* adds retries and backoffs to the where they were needed but not implemented
* annotates those CSI RPCs that do not need retries so that we don't wonder whether it's been left off accidentally
* added a timeout and cancellation context to the `Probe` call, which didn't have one.
Add mount_options to both the volume definition on registration and to the volume block in the group where the volume is requested. If both are specified, the options provided in the request replace the options defined in the volume. They get passed to the NodePublishVolume, which causes the node plugin to actually mount the volume on the host.
Individual tasks just mount bind into the host mounted volume (unchanged behavior). An operator can mount the same volume with different options by specifying it twice in the group context.
closes#7007
* nomad/structs/volumes: add MountOptions to volume request
* jobspec/test-fixtures/basic.hcl: add mount_options to volume block
* jobspec/parse_test: add expected MountOptions
* api/tasks: add mount_options
* jobspec/parse_group: use hcl decode not mapstructure, mount_options
* client/allocrunner/csi_hook: pass MountOptions through
client/allocrunner/csi_hook: add a VolumeMountOptions
client/allocrunner/csi_hook: drop Options
client/allocrunner/csi_hook: use the structs options
* client/pluginmanager/csimanager/interface: UsageOptions.MountOptions
* client/pluginmanager/csimanager/volume: pass MountOptions in capabilities
* plugins/csi/plugin: remove todo 7007 comment
* nomad/structs/csi: MountOptions
* api/csi: add options to the api for parsing, match structs
* plugins/csi/plugin: move VolumeMountOptions to structs
* api/csi: use specific type for mount_options
* client/allocrunner/csi_hook: merge MountOptions here
* rename CSIOptions to CSIMountOptions
* client/allocrunner/csi_hook
* client/pluginmanager/csimanager/volume
* nomad/structs/csi
* plugins/csi/fake/client: add PrevVolumeCapability
* plugins/csi/plugin
* client/pluginmanager/csimanager/volume_test: remove debugging
* client/pluginmanager/csimanager/volume: fix odd merging logic
* api: rename CSIOptions -> CSIMountOptions
* nomad/csi_endpoint: remove a 7007 comment
* command/alloc_status: show mount options in the volume list
* nomad/structs/csi: include MountOptions in the volume stub
* api/csi: add MountOptions to stub
* command/volume_status_csi: clean up csiVolMountOption, add it
* command/alloc_status: csiVolMountOption lives in volume_csi_status
* command/node_status: display mount flags
* nomad/structs/volumes: npe
* plugins/csi/plugin: npe in ToCSIRepresentation
* jobspec/parse_test: expand volume parse test cases
* command/agent/job_endpoint: ApiTgToStructsTG needs MountOptions
* command/volume_status_csi: copy paste error
* jobspec/test-fixtures/basic: hclfmt
* command/volume_status_csi: clean up csiVolMountOption
Run the plugin fingerprint one last time with a closed client during
instance manager shutdown. This will return quickly and will give us a
correctly-populated `PluginInfo` marked as unhealthy so the Nomad
client can update the server about plugin health.
Allow for faster updates to plugin status when allocations become
terminal by listening for register/deregister events from the dynamic
plugin registry (which in turn are triggered by the plugin supervisor
hook).
The deregistration function closures that we pass up to the CSI plugin
manager don't properly close over the name and type of the
registration, causing monolith-type plugins to deregister only one of
their two plugins on alloc shutdown. Rebind plugin supervisor
deregistration targets to fix that.
Includes log message and comment improvements
In order to correctly fingerprint dynamic plugins on client restarts,
we need to persist a handle to the plugin (that is, connection info)
to the client state store.
The dynamic registry will sync automatically to the client state
whenever it receives a register/deregister call.
