The service registration client name was used to provide a
distinction between the service block and the service client. This
however creates new wording to understand and does not match the
CLI, therefore this change fixes that so we have a Services
client.
Consul specific objects within the service file have been moved to
the consul location to create a clearer separation.
This is a followup to running tests in serial in CI.
Since the API package cannot import anything outside of api/,
copy the ci.Parallel function into api/internal/testutil, and
have api tests use that.
This PR fixes the API to _not_ set the default mesh gateway mode. Before,
the mode would be set to "none" in Canonicalize, which is incorrect. We
should pass through the empty string so that folks can make use of Consul
service-defaults Config entries to configure the default mode.
This PR implements first-class support for Nomad running Consul
Connect Mesh Gateways. Mesh gateways enable services in the Connect
mesh to make cross-DC connections via gateways, where each datacenter
may not have full node interconnectivity.
Consul docs with more information:
https://www.consul.io/docs/connect/gateways/mesh-gateway
The following group level service block can be used to establish
a Connect mesh gateway.
service {
connect {
gateway {
mesh {
// no configuration
}
}
}
}
Services can make use of a mesh gateway by configuring so in their
upstream blocks, e.g.
service {
connect {
sidecar_service {
proxy {
upstreams {
destination_name = "<service>"
local_bind_port = <port>
datacenter = "<datacenter>"
mesh_gateway {
mode = "<mode>"
}
}
}
}
}
}
Typical use of a mesh gateway is to create a bridge between datacenters.
A mesh gateway should then be configured with a service port that is
mapped from a host_network configured on a WAN interface in Nomad agent
config, e.g.
client {
host_network "public" {
interface = "eth1"
}
}
Create a port mapping in the group.network block for use by the mesh
gateway service from the public host_network, e.g.
network {
mode = "bridge"
port "mesh_wan" {
host_network = "public"
}
}
Use this port label for the service.port of the mesh gateway, e.g.
service {
name = "mesh-gateway"
port = "mesh_wan"
connect {
gateway {
mesh {}
}
}
}
Currently Envoy is the only supported gateway implementation in Consul.
By default Nomad client will run the latest official Envoy docker image
supported by the local Consul agent. The Envoy task can be customized
by setting `meta.connect.gateway_image` in agent config or by setting
the `connect.sidecar_task` block.
Gateways require Consul 1.8.0+, enforced by the Nomad scheduler.
Closes#9446
Allow for readiness type checks by configuring nomad to ignore warnings
or errors reported by a service check. This allows the deployment to
progress and while Consul handles introducing the sercive into a
resource pool once the check passes.
This PR implements Nomad built-in support for running Consul Connect
terminating gateways. Such a gateway can be used by services running
inside the service mesh to access "legacy" services running outside
the service mesh while still making use of Consul's service identity
based networking and ACL policies.
https://www.consul.io/docs/connect/gateways/terminating-gateway
These gateways are declared as part of a task group level service
definition within the connect stanza.
service {
connect {
gateway {
proxy {
// envoy proxy configuration
}
terminating {
// terminating-gateway configuration entry
}
}
}
}
Currently Envoy is the only supported gateway implementation in
Consul. The gateay task can be customized by configuring the
connect.sidecar_task block.
When the gateway.terminating field is set, Nomad will write/update
the Configuration Entry into Consul on job submission. Because CEs
are global in scope and there may be more than one Nomad cluster
communicating with Consul, there is an assumption that any terminating
gateway defined in Nomad for a particular service will be the same
among Nomad clusters.
Gateways require Consul 1.8.0+, checked by a node constraint.
Closes#9445
Before, upstreams could only be defined using the default datacenter.
Now, the `datacenter` field can be set in a connect upstream definition,
informing consul of the desire for an instance of the upstream service
in the specified datacenter. The field is optional and continues to
default to the local datacenter.
Closes#8964
This PR adds initial support for running Consul Connect Ingress Gateways (CIGs) in Nomad. These gateways are declared as part of a task group level service definition within the connect stanza.
```hcl
service {
connect {
gateway {
proxy {
// envoy proxy configuration
}
ingress {
// ingress-gateway configuration entry
}
}
}
}
```
A gateway can be run in `bridge` or `host` networking mode, with the caveat that host networking necessitates manually specifying the Envoy admin listener (which cannot be disabled) via the service port value.
Currently Envoy is the only supported gateway implementation in Consul, and Nomad only supports running Envoy as a gateway using the docker driver.
Aims to address #8294 and tangentially #8647
This change adds the ability to set the fields `success_before_passing` and
`failures_before_critical` on Consul service check definitions. This is a
feature added to Consul v1.7.0 and later.
https://www.consul.io/docs/agent/checks#success-failures-before-passing-critical
Nomad doesn't do much besides pass the fields through to Consul.
Fixes#6913
This PR adds the capability of running Connect Native Tasks on Nomad,
particularly when TLS and ACLs are enabled on Consul.
The `connect` stanza now includes a `native` parameter, which can be
set to the name of task that backs the Connect Native Consul service.
There is a new Client configuration parameter for the `consul` stanza
called `share_ssl`. Like `allow_unauthenticated` the default value is
true, but recommended to be disabled in production environments. When
enabled, the Nomad Client's Consul TLS information is shared with
Connect Native tasks through the normal Consul environment variables.
This does NOT include auth or token information.
If Consul ACLs are enabled, Service Identity Tokens are automatically
and injected into the Connect Native task through the CONSUL_HTTP_TOKEN
environment variable.
Any of the automatically set environment variables can be overridden by
the Connect Native task using the `env` stanza.
Fixes#6083
Add `Canonicalize` methods to the connect components of a service
definition in the `api` package. Without these, we have been relying
on good input for the connect stanza.
Fixes#7993
Consul provides a feature of Service Definitions where the tags
associated with a service can be modified through the Catalog API,
overriding the value(s) configured in the agent's service configuration.
To enable this feature, the flag enable_tag_override must be configured
in the service definition.
Previously, Nomad did not allow configuring this flag, and thus the default
value of false was used. Now, it is configurable.
Because Nomad itself acts as a state machine around the the service definitions
of the tasks it manages, it's worth describing what happens when this feature
is enabled and why.
Consider the basic case where there is no Nomad, and your service is provided
to consul as a boring JSON file. The ultimate source of truth for the definition
of that service is the file, and is stored in the agent. Later, Consul performs
"anti-entropy" which synchronizes the Catalog (stored only the leaders). Then
with enable_tag_override=true, the tags field is available for "external"
modification through the Catalog API (rather than directly configuring the
service definition file, or using the Agent API). The important observation
is that if the service definition ever changes (i.e. the file is changed &
config reloaded OR the Agent API is used to modify the service), those
"external" tag values are thrown away, and the new service definition is
once again the source of truth.
In the Nomad case, Nomad itself is the source of truth over the Agent in
the same way the JSON file was the source of truth in the example above.
That means any time Nomad sets a new service definition, any externally
configured tags are going to be replaced. When does this happen? Only on
major lifecycle events, for example when a task is modified because of an
updated job spec from the 'nomad job run <existing>' command. Otherwise,
Nomad's periodic re-sync's with Consul will now no longer try to restore
the externally modified tag values (as long as enable_tag_override=true).
Fixes#2057
Without a `LocalServicePort`, Connect services will try to use the
mapped port even when delivering traffic locally. A user can override
this behavior by pinning the port value in the `service` stanza but
this prevents us from using the Consul service name to reach the
service.
This commits configures the Consul proxy with its `LocalServicePort`
and `LocalServiceAddress` fields.
Piotr Kazmierczak