* Upgrade from hashicorp/go-msgpack v1.1.5 to v2.1.0
Fixes#16808
* Update hashicorp/net-rpc-msgpackrpc to v2 to match go-msgpack
* deps: use go-msgpack v2.0.0
go-msgpack v2.1.0 includes some code changes that we will need to
investigate furthere to assess its impact on Nomad, so keeping this
dependency on v2.0.0 for now since it's no-op.
---------
Co-authored-by: Luiz Aoqui <luiz@hashicorp.com>
Fixes#14617
Dynamic Node Metadata allows Nomad users, and their jobs, to update Node metadata through an API. Currently Node metadata is only reloaded when a Client agent is restarted.
Includes new UI for editing metadata as well.
---------
Co-authored-by: Phil Renaud <phil.renaud@hashicorp.com>
This change introduces the Task API: a portable way for tasks to access Nomad's HTTP API. This particular implementation uses a Unix Domain Socket and, unlike the agent's HTTP API, always requires authentication even if ACLs are disabled.
This PR contains the core feature and tests but followup work is required for the following TODO items:
- Docs - might do in a followup since dynamic node metadata / task api / workload id all need to interlink
- Unit tests for auth middleware
- Caching for auth middleware
- Rate limiting on negative lookups for auth middleware
---------
Co-authored-by: Seth Hoenig <shoenig@duck.com>
When querying the checks for an allocation, the request must be
forwarded to the agent that is running the allocation. If the
initial request is made to a server agent, the request can be made
directly to the client agent running the allocation. If the
request is made to a client agent not running the alloc, the
request needs to be forwarded to a server and then the correct
client.
* allocrunner: handle lifecycle when all tasks die
When all tasks die the Coordinator must transition to its terminal
state, coordinatorStatePoststop, to unblock poststop tasks. Since this
could happen at any time (for example, a prestart task dies), all states
must be able to transition to this terminal state.
* allocrunner: implement different alloc restarts
Add a new alloc restart mode where all tasks are restarted, even if they
have already exited. Also unifies the alloc restart logic to use the
implementation that restarts tasks concurrently and ignores
ErrTaskNotRunning errors since those are expected when restarting the
allocation.
* allocrunner: allow tasks to run again
Prevent the task runner Run() method from exiting to allow a dead task
to run again. When the task runner is signaled to restart, the function
will jump back to the MAIN loop and run it again.
The task runner determines if a task needs to run again based on two new
task events that were added to differentiate between a request to
restart a specific task, the tasks that are currently running, or all
tasks that have already run.
* api/cli: add support for all tasks alloc restart
Implement the new -all-tasks alloc restart CLI flag and its API
counterpar, AllTasks. The client endpoint calls the appropriate restart
method from the allocrunner depending on the restart parameters used.
* test: fix tasklifecycle Coordinator test
* allocrunner: kill taskrunners if all tasks are dead
When all non-poststop tasks are dead we need to kill the taskrunners so
we don't leak their goroutines, which are blocked in the alloc restart
loop. This also ensures the allocrunner exits on its own.
* taskrunner: fix tests that waited on WaitCh
Now that "dead" tasks may run again, the taskrunner Run() method will
not return when the task finishes running, so tests must wait for the
task state to be "dead" instead of using the WaitCh, since it won't be
closed until the taskrunner is killed.
* tests: add tests for all tasks alloc restart
* changelog: add entry for #14127
* taskrunner: fix restore logic.
The first implementation of the task runner restore process relied on
server data (`tr.Alloc().TerminalStatus()`) which may not be available
to the client at the time of restore.
It also had the incorrect code path. When restoring a dead task the
driver handle always needs to be clear cleanly using `clearDriverHandle`
otherwise, after exiting the MAIN loop, the task may be killed by
`tr.handleKill`.
The fix is to store the state of the Run() loop in the task runner local
client state: if the task runner ever exits this loop cleanly (not with
a shutdown) it will never be able to run again. So if the Run() loops
starts with this local state flag set, it must exit early.
This local state flag is also being checked on task restart requests. If
the task is "dead" and its Run() loop is not active it will never be
able to run again.
* address code review requests
* apply more code review changes
* taskrunner: add different Restart modes
Using the task event to differentiate between the allocrunner restart
methods proved to be confusing for developers to understand how it all
worked.
So instead of relying on the event type, this commit separated the logic
of restarting an taskRunner into two methods:
- `Restart` will retain the current behaviour and only will only restart
the task if it's currently running.
- `ForceRestart` is the new method where a `dead` task is allowed to
restart if its `Run()` method is still active. Callers will need to
restart the allocRunner taskCoordinator to make sure it will allow the
task to run again.
* minor fixes
This PR adds support for specifying checks in services registered to
the built-in nomad service provider.
Currently only HTTP and TCP checks are supported, though more types
could be added later.
Some operators use very long group/task `shutdown_delay` settings to
safely drain network connections to their workloads after service
deregistration. But during incident response, they may want to cause
that drain to be skipped so they can quickly shed load.
Provide a `-no-shutdown-delay` flag on the `nomad alloc stop` and
`nomad job stop` commands that bypasses the delay. This sets a new
desired transition state on the affected allocations that the
allocation/task runner will identify during pre-kill on the client.
Note (as documented here) that using this flag will almost always
result in failed inbound network connections for workloads as the
tasks will exit before clients receive updated service discovery
information and won't be gracefully drained.
In this loop, we ought to close the websocket connection gracefully when
the StreamErrWrapper reaches EOF.
Previously, it's possible that that we drop the last few events or skip sending
the websocket closure. If `handler(handlerPipe)` returns and `cancel` is called,
before the loop here completes processing streaming events, the loop exits
prematurely without propagating the last few events.
Instead here, the loop continues until we hit `httpPipe` EOF (through
`decoder.Decode`), to ensure we process the events to completion.
The websocket interface used for `alloc exec` has to silently drop client send
errors because otherwise those errors would interleave with the streamed
output. But we may be able to surface errors that cause terminated websockets
a little better in the HTTP server logs.
Fixes#9017
The ?resources=true query parameter includes resources in the object
stub listings. Specifically:
- For `/v1/nodes?resources=true` both the `NodeResources` and
`ReservedResources` field are included.
- For `/v1/allocations?resources=true` the `AllocatedResources` field is
included.
The ?task_states=false query parameter removes TaskStates from
/v1/allocations responses. (By default TaskStates are included.)
The javascript Websocket API doesn't support setting custom headers
(e.g. `X-Nomad-Token`). This change adds support for having an
authentication handshake message: clients can set `ws_handshake` URL
query parameter to true and send a single handshake message with auth
token first before any other mssage.
This is a backward compatible change: it does not affect nomad CLI path, as it
doesn't set `ws_handshake` parameter.
Currently when you submit a manual request to the alloc lifecycle API
with a version of Curl that will submit empty bodies, the alloc restart
api will fail with an EOF error.
This behaviour is undesired, as it is reasonable to not submit a body at
all when restarting an entire allocation rather than an individual task.
This fixes it by ignoring EOF (not unexpected EOF) errors and treating
them as entire task restarts.
This adds a websocket endpoint for handling `nomad exec`.
The endpoint is a websocket interface, as we require a bi-directional
streaming (to handle both input and output), which is not very appropriate for
plain HTTP 1.0. Using websocket makes implementing the web ui a bit simpler. I
considered using golang http hijack capability to treat http request as a plain
connection, but the web interface would be too complicated potentially.
Furthermore, the API endpoint operates against the raw core nomad exec streaming
datastructures, defined in protobuf, with json serializer. Our APIs use json
interfaces in general, and protobuf generates json friendly golang structs.
Reusing the structs here simplify interface and reduce conversion overhead.
This command will be used to send a signal to either a single task within an
allocation, or all of the tasks if <task-name> is omitted. If the sent signal
terminates the allocation, it will be treated as if the allocation has crashed,
rather than as if it was operator-terminated.
Signal validation is currently handled by the driver itself and nomad
does not attempt to restrict or validate them.
This adds a `nomad alloc stop` command that can be used to stop and
force migrate an allocation to a different node.
This is built on top of the AllocUpdateDesiredTransitionRequest and
explicitly limits the scope of access to that transition to expose it
under the alloc-lifecycle ACL.
The API returns the follow up eval that can be used as part of
monitoring in the CLI or parsed and used in an external tool.
This adds a `nomad alloc restart` command and api that allows a job operator
with the alloc-lifecycle acl to perform an in-place restart of a Nomad
allocation, or a given subtask.
The Client.allocs map now contains all AllocRunners again, not just
un-GC'd AllocRunners. Client.allocs is only pruned when the server GCs
allocs.
Also stops logging "marked for GC" twice.
Piotr Kazmierczak