Merge pull request #434 from hashicorp/f-docker-any-network

Remove restrictions from docker networking mode
This commit is contained in:
Chris Bednarski 2015-11-17 17:24:12 -08:00
commit e7e1051f51
2 changed files with 69 additions and 75 deletions

View file

@ -235,23 +235,13 @@ func (d *DockerDriver) createContainer(ctx *ExecContext, task *structs.Task, dri
}
}
mode := driverConfig.NetworkMode
if mode == "" {
hostConfig.NetworkMode = driverConfig.NetworkMode
if hostConfig.NetworkMode == "" {
// docker default
d.logger.Println("[DEBUG] driver.docker: no mode specified for networking, defaulting to bridge")
mode = "bridge"
d.logger.Println("[INFO] driver.docker: networking mode not specified; defaulting to bridge")
hostConfig.NetworkMode = "bridge"
}
// Ignore the container mode for now
switch mode {
case "default", "bridge", "none", "host":
d.logger.Printf("[DEBUG] driver.docker: using %s as network mode\n", mode)
default:
d.logger.Printf("[ERR] driver.docker: invalid setting for network mode: %s\n", mode)
return c, fmt.Errorf("Invalid setting for network mode: %s", mode)
}
hostConfig.NetworkMode = mode
// Setup port mapping and exposed ports
if len(task.Resources.Networks) == 0 {
d.logger.Println("[DEBUG] driver.docker: No network interfaces are available")

View file

@ -16,7 +16,8 @@ and cleaning up after containers.
## Task Configuration
The `docker` driver supports the following configuration in the job specification:
The `docker` driver supports the following configuration in the job
specification:
* `image` - (Required) The Docker image to run. The image may include a tag or
custom URL. By default it will be fetched from Docker Hub.
@ -26,38 +27,40 @@ The `docker` driver supports the following configuration in the job specificatio
* `args` - (Optional) Arguments to the optional `command`. If no `command` is
present, `args` are ignored.
* `network_mode` - (Optional) The network mode to be used for the container.
Valid options are `default`, `bridge`, `host` or `none`. If nothing is
specified, the container will start in `bridge` mode. The `container`
network mode is not supported right now and is reported as an invalid
option.
* `network_mode` - (Optional) The network mode to be used for the container. In
order to support userspace networking plugins in Docker 1.9 this accepts any
value. The default is `bridge`. Other networking modes may not work without
additional configuration on the host (which is outside the scope of Nomad).
Valid values pre-docker 1.9 are `default`, `bridge`, `host`, `none`, or
`container:name`.
* `privileged` - (Optional) Privileged mode gives the container full access to
the host. Valid options are `"true"` and `"false"` (defaults to `"false"`).
Tasks with `privileged` set can only run on Nomad Agents with
`docker.privileged.enabled = "true"`.
the host. Valid options are `"true"` and `"false"` (defaults to `"false"`).
Tasks with `privileged` set can only run on Nomad Agents with
`docker.privileged.enabled = "true"`.
* `dns-servers` - (Optional) A comma separated list of DNS servers for the container
to use (e.g. "8.8.8.8,8.8.4.4"). *Docker API v1.10 and above only*
* `dns-servers` - (Optional) A comma separated list of DNS servers for the
container to use (e.g. "8.8.8.8,8.8.4.4"). *Docker API v1.10 and above only*
* `search-domains` - (Optional) A comma separated list of DNS search domains for the
container to use.
* `search-domains` - (Optional) A comma separated list of DNS search domains
for the container to use.
* `hostname` - (optional) The hostname to assign to the container. When launching more
than one of a task (using `count`) with this option set, every container the task
starts will have the same hostname.
* `hostname` - (Optional) The hostname to assign to the container. When
launching more than one of a task (using `count`) with this option set, every
container the task starts will have the same hostname.
* `labels` - (Optional) A key/value map of labels to set to the containers on start.
* `labels` - (Optional) A key/value map of labels to set to the containers on
start.
**Authentication**
Registry authentication can be set per task with the following authentication
parameters. These options can provide access to private repositories that
utilize the docker remote api (e.g. dockerhub, quay.io)
- `auth.username` - (Optional) The account username
- `auth.password` - (Optional) The account password
- `auth.email` - (Optional) The account email
- `auth.server-address` - (Optional) The server domain/ip without the protocol
**Authentication** Registry authentication can be set per task with the
following authentication parameters. These options can provide access to
private repositories that utilize the docker remote api (e.g. dockerhub,
quay.io)
- `auth.username` - (Optional) The account username
- `auth.password` - (Optional) The account password
- `auth.email` - (Optional) The account email
- `auth.server-address` - (Optional) The server domain/ip without the
protocol
### Port Mapping
@ -70,16 +73,16 @@ Nomad provides automatic and manual mapping schemes for Docker. You can use
either or both schemes for a task. Nomad binds both tcp and udp protocols to
ports used for Docker containers. This is not configurable.
Note: You are not required to map any ports, for example if your task is running
a crawler or aggregator and does not provide a network service. Tasks without a
port mapping will still be able to make outbound network connections.
Note: You are not required to map any ports, for example if your task is
running a crawler or aggregator and does not provide a network service. Tasks
without a port mapping will still be able to make outbound network connections.
#### Automatic Port Mapping
Typically when you create a Docker container you configure the service to start
listening on a port (or ports) when you start the container. For example, redis
starts listening on `6379` when you `docker run redis`. Nomad can support this by
mapping a random port on the host machine to the port inside the container.
starts listening on `6379` when you `docker run redis`. Nomad can support this
by mapping a random port on the host machine to the port inside the container.
You need to tell Nomad which ports your container is using so Nomad can map
allocated ports for you. You do so by specifying a **numeric port value** for
@ -94,17 +97,17 @@ dynamic_ports = [6379]
This instructs Nomad to create a port mapping from the random port on the host
to the port inside the container. So in our example above, when you contact the
host on `1.2.3.4:22333` you will actually hit the service running inside the
container on port `6379`. You can see which port was actually bound by reading the
`NOMAD_PORT_6379` [environment variable](/docs/jobspec/environment.html).
container on port `6379`. You can see which port was actually bound by reading
the `NOMAD_PORT_6379` [environment variable](/docs/jobspec/environment.html).
In most cases, the automatic port mapping will be the easiest to use, but you
can also use manual port mapping (described below).
#### Manual Port Mapping
The `dynamic_ports` option takes any alphanumeric string as a label, so you could
also specify a label for the port like `http` or `admin` to designate how the
port will be used.
The `dynamic_ports` option takes any alphanumeric string as a label, so you
could also specify a label for the port like `http` or `admin` to designate how
the port will be used.
In this case, Nomad doesn't know which container port to map to, so it maps 1:1
with the host port. For example, `1.2.3.4:22333` will map to `22333` inside the
@ -119,28 +122,29 @@ determine which port to bind to.
## Client Requirements
Nomad requires Docker to be installed and running on the host alongside the Nomad
agent. Nomad was developed against Docker `1.8.2`.
Nomad requires Docker to be installed and running on the host alongside the
Nomad agent. Nomad was developed against Docker `1.8.2`.
By default Nomad communicates with the Docker daemon using the daemon's
unix socket. Nomad will need to be able to read/write to this socket. If you do
not run Nomad as root, make sure you add the Nomad user to the Docker group so
By default Nomad communicates with the Docker daemon using the daemon's unix
socket. Nomad will need to be able to read/write to this socket. If you do not
run Nomad as root, make sure you add the Nomad user to the Docker group so
Nomad can communicate with the Docker daemon.
For example, on ubuntu you can use the `usermod` command to add the `vagrant` user to the
`docker` group so you can run Nomad without root:
For example, on ubuntu you can use the `usermod` command to add the `vagrant`
user to the `docker` group so you can run Nomad without root:
sudo usermod -G docker -a vagrant
For the best performance and security features you should use recent versions of
the Linux Kernel and Docker daemon.
For the best performance and security features you should use recent versions
of the Linux Kernel and Docker daemon.
## Client Configuration
The `docker` driver has the following configuration options:
* `docker.endpoint` - Defaults to `unix:///var/run/docker.sock`. You will need
to customize this if you use a non-standard socket (http or another location).
to customize this if you use a non-standard socket (http or another
location).
* `docker.cleanup.container` Defaults to `true`. Changing this to `false` will
prevent Nomad from removing containers from stopped tasks.
@ -149,9 +153,8 @@ The `docker` driver has the following configuration options:
prevent Nomad from removing images from stopped tasks.
* `docker.privileged.enabled` Defaults to `false`. Changing this to `true` will
allow containers to use "privileged" mode, which gives the containers full access
to the host.
allow containers to use "privileged" mode, which gives the containers full
access to the host.
Note: When testing or using the `-dev` flag you can use `DOCKER_HOST`,
`DOCKER_TLS_VERIFY`, and `DOCKER_CERT_PATH` to customize Nomad's behavior. In
@ -161,21 +164,20 @@ production Nomad will always read `docker.endpoint`.
The `docker` driver will set the following client attributes:
* `driver.docker` - This will be set to "1", indicating the
driver is available.
* `driver.docker.version` - This will be set to version of the
docker server
* `driver.docker` - This will be set to "1", indicating the driver is
available.
* `driver.docker.version` - This will be set to version of the docker server
## Resource Isolation
### CPU
Nomad limits containers' CPU based on CPU shares. CPU shares allow containers to
burst past their CPU limits. CPU limits will only be imposed when there is
Nomad limits containers' CPU based on CPU shares. CPU shares allow containers
to burst past their CPU limits. CPU limits will only be imposed when there is
contention for resources. When the host is under load your process may be
throttled to stabilize QOS depending on how many shares it has. You can see how
many CPU shares are available to your process by reading `NOMAD_CPU_LIMIT`. 1000
shares are approximately equal to 1Ghz.
many CPU shares are available to your process by reading `NOMAD_CPU_LIMIT`.
1000 shares are approximately equal to 1Ghz.
Please keep the implications of CPU shares in mind when you load test workloads
on Nomad.
@ -184,7 +186,8 @@ on Nomad.
Nomad limits containers' memory usage based on total virtual memory. This means
that containers scheduled by Nomad cannot use swap. This is to ensure that a
swappy process does not degrade performance for other workloads on the same host.
swappy process does not degrade performance for other workloads on the same
host.
Since memory is not an elastic resource, you will need to make sure your
container does not exceed the amount of memory allocated to it, or it will be
@ -201,6 +204,7 @@ filesystem IO. These will be added in a later release.
Docker provides resource isolation by way of
[cgroups and namespaces](https://docs.docker.com/introduction/understanding-docker/#the-underlying-technology).
Containers essentially have a virtual file system all to themselves. If you need
a higher degree of isolation between processes for security or other reasons, it
is recommended to use full virtualization like [QEMU](/docs/drivers/qemu.html).
Containers essentially have a virtual file system all to themselves. If you
need a higher degree of isolation between processes for security or other
reasons, it is recommended to use full virtualization like
[QEMU](/docs/drivers/qemu.html).