open-nomad/command/agent/consul/unit_test.go

1820 lines
53 KiB
Go
Raw Normal View History

package consul
import (
"context"
client: enable configuring enable_tag_override for services Consul provides a feature of Service Definitions where the tags associated with a service can be modified through the Catalog API, overriding the value(s) configured in the agent's service configuration. To enable this feature, the flag enable_tag_override must be configured in the service definition. Previously, Nomad did not allow configuring this flag, and thus the default value of false was used. Now, it is configurable. Because Nomad itself acts as a state machine around the the service definitions of the tasks it manages, it's worth describing what happens when this feature is enabled and why. Consider the basic case where there is no Nomad, and your service is provided to consul as a boring JSON file. The ultimate source of truth for the definition of that service is the file, and is stored in the agent. Later, Consul performs "anti-entropy" which synchronizes the Catalog (stored only the leaders). Then with enable_tag_override=true, the tags field is available for "external" modification through the Catalog API (rather than directly configuring the service definition file, or using the Agent API). The important observation is that if the service definition ever changes (i.e. the file is changed & config reloaded OR the Agent API is used to modify the service), those "external" tag values are thrown away, and the new service definition is once again the source of truth. In the Nomad case, Nomad itself is the source of truth over the Agent in the same way the JSON file was the source of truth in the example above. That means any time Nomad sets a new service definition, any externally configured tags are going to be replaced. When does this happen? Only on major lifecycle events, for example when a task is modified because of an updated job spec from the 'nomad job run <existing>' command. Otherwise, Nomad's periodic re-sync's with Consul will now no longer try to restore the externally modified tag values (as long as enable_tag_override=true). Fixes #2057
2020-02-07 21:22:19 +00:00
"errors"
"fmt"
"reflect"
2017-08-16 18:27:30 +00:00
"strings"
2017-09-14 22:17:21 +00:00
"sync/atomic"
"testing"
"time"
"github.com/hashicorp/consul/api"
"github.com/hashicorp/nomad/helper/testlog"
"github.com/hashicorp/nomad/helper/uuid"
"github.com/hashicorp/nomad/nomad/structs"
"github.com/hashicorp/nomad/plugins/drivers"
2017-08-16 18:27:30 +00:00
"github.com/kr/pretty"
"github.com/stretchr/testify/assert"
"github.com/stretchr/testify/require"
)
const (
// Ports used in testWorkload
xPort = 1234
yPort = 1235
)
func testWorkload() *WorkloadServices {
return &WorkloadServices{
AllocID: uuid.Generate(),
Task: "taskname",
Restarter: &restartRecorder{},
Services: []*structs.Service{
{
Name: "taskname-service",
PortLabel: "x",
Tags: []string{"tag1", "tag2"},
2019-11-13 03:27:54 +00:00
Meta: map[string]string{"meta1": "foo"},
},
},
Networks: []*structs.NetworkResource{
{
DynamicPorts: []structs.Port{
{Label: "x", Value: xPort},
{Label: "y", Value: yPort},
},
},
},
}
}
// restartRecorder is a minimal WorkloadRestarter implementation that simply
// counts how many restarts were triggered.
type restartRecorder struct {
restarts int64
}
2018-10-05 02:36:40 +00:00
func (r *restartRecorder) Restart(ctx context.Context, event *structs.TaskEvent, failure bool) error {
atomic.AddInt64(&r.restarts, 1)
2018-10-05 02:36:40 +00:00
return nil
}
// testFakeCtx contains a fake Consul AgentAPI
type testFakeCtx struct {
ServiceClient *ServiceClient
FakeConsul *MockAgent
Workload *WorkloadServices
}
var errNoOps = fmt.Errorf("testing error: no pending operations")
// syncOps simulates one iteration of the ServiceClient.Run loop and returns
// any errors returned by sync() or errNoOps if no pending operations.
client: enable configuring enable_tag_override for services Consul provides a feature of Service Definitions where the tags associated with a service can be modified through the Catalog API, overriding the value(s) configured in the agent's service configuration. To enable this feature, the flag enable_tag_override must be configured in the service definition. Previously, Nomad did not allow configuring this flag, and thus the default value of false was used. Now, it is configurable. Because Nomad itself acts as a state machine around the the service definitions of the tasks it manages, it's worth describing what happens when this feature is enabled and why. Consider the basic case where there is no Nomad, and your service is provided to consul as a boring JSON file. The ultimate source of truth for the definition of that service is the file, and is stored in the agent. Later, Consul performs "anti-entropy" which synchronizes the Catalog (stored only the leaders). Then with enable_tag_override=true, the tags field is available for "external" modification through the Catalog API (rather than directly configuring the service definition file, or using the Agent API). The important observation is that if the service definition ever changes (i.e. the file is changed & config reloaded OR the Agent API is used to modify the service), those "external" tag values are thrown away, and the new service definition is once again the source of truth. In the Nomad case, Nomad itself is the source of truth over the Agent in the same way the JSON file was the source of truth in the example above. That means any time Nomad sets a new service definition, any externally configured tags are going to be replaced. When does this happen? Only on major lifecycle events, for example when a task is modified because of an updated job spec from the 'nomad job run <existing>' command. Otherwise, Nomad's periodic re-sync's with Consul will now no longer try to restore the externally modified tag values (as long as enable_tag_override=true). Fixes #2057
2020-02-07 21:22:19 +00:00
func (t *testFakeCtx) syncOnce(reason syncReason) error {
switch reason {
case syncPeriodic:
err := t.ServiceClient.sync(syncPeriodic)
if err == nil {
t.ServiceClient.clearExplicitlyDeregistered()
}
return err
client: enable configuring enable_tag_override for services Consul provides a feature of Service Definitions where the tags associated with a service can be modified through the Catalog API, overriding the value(s) configured in the agent's service configuration. To enable this feature, the flag enable_tag_override must be configured in the service definition. Previously, Nomad did not allow configuring this flag, and thus the default value of false was used. Now, it is configurable. Because Nomad itself acts as a state machine around the the service definitions of the tasks it manages, it's worth describing what happens when this feature is enabled and why. Consider the basic case where there is no Nomad, and your service is provided to consul as a boring JSON file. The ultimate source of truth for the definition of that service is the file, and is stored in the agent. Later, Consul performs "anti-entropy" which synchronizes the Catalog (stored only the leaders). Then with enable_tag_override=true, the tags field is available for "external" modification through the Catalog API (rather than directly configuring the service definition file, or using the Agent API). The important observation is that if the service definition ever changes (i.e. the file is changed & config reloaded OR the Agent API is used to modify the service), those "external" tag values are thrown away, and the new service definition is once again the source of truth. In the Nomad case, Nomad itself is the source of truth over the Agent in the same way the JSON file was the source of truth in the example above. That means any time Nomad sets a new service definition, any externally configured tags are going to be replaced. When does this happen? Only on major lifecycle events, for example when a task is modified because of an updated job spec from the 'nomad job run <existing>' command. Otherwise, Nomad's periodic re-sync's with Consul will now no longer try to restore the externally modified tag values (as long as enable_tag_override=true). Fixes #2057
2020-02-07 21:22:19 +00:00
case syncNewOps:
select {
case ops := <-t.ServiceClient.opCh:
t.ServiceClient.merge(ops)
err := t.ServiceClient.sync(syncNewOps)
if err == nil {
t.ServiceClient.clearExplicitlyDeregistered()
}
return err
default:
return errNoOps
}
case syncShutdown:
return errors.New("no test for sync due to shutdown")
}
client: enable configuring enable_tag_override for services Consul provides a feature of Service Definitions where the tags associated with a service can be modified through the Catalog API, overriding the value(s) configured in the agent's service configuration. To enable this feature, the flag enable_tag_override must be configured in the service definition. Previously, Nomad did not allow configuring this flag, and thus the default value of false was used. Now, it is configurable. Because Nomad itself acts as a state machine around the the service definitions of the tasks it manages, it's worth describing what happens when this feature is enabled and why. Consider the basic case where there is no Nomad, and your service is provided to consul as a boring JSON file. The ultimate source of truth for the definition of that service is the file, and is stored in the agent. Later, Consul performs "anti-entropy" which synchronizes the Catalog (stored only the leaders). Then with enable_tag_override=true, the tags field is available for "external" modification through the Catalog API (rather than directly configuring the service definition file, or using the Agent API). The important observation is that if the service definition ever changes (i.e. the file is changed & config reloaded OR the Agent API is used to modify the service), those "external" tag values are thrown away, and the new service definition is once again the source of truth. In the Nomad case, Nomad itself is the source of truth over the Agent in the same way the JSON file was the source of truth in the example above. That means any time Nomad sets a new service definition, any externally configured tags are going to be replaced. When does this happen? Only on major lifecycle events, for example when a task is modified because of an updated job spec from the 'nomad job run <existing>' command. Otherwise, Nomad's periodic re-sync's with Consul will now no longer try to restore the externally modified tag values (as long as enable_tag_override=true). Fixes #2057
2020-02-07 21:22:19 +00:00
return errors.New("bad sync reason")
}
// setupFake creates a testFakeCtx with a ServiceClient backed by a fakeConsul.
// A test Workload is also provided.
func setupFake(t *testing.T) *testFakeCtx {
fc := NewMockAgent()
tw := testWorkload()
// by default start fake client being out of probation
sc := NewServiceClient(fc, testlog.HCLogger(t), true)
sc.deregisterProbationExpiry = time.Now().Add(-1 * time.Minute)
return &testFakeCtx{
ServiceClient: sc,
FakeConsul: fc,
Workload: tw,
}
}
func TestConsul_ChangeTags(t *testing.T) {
client: enable configuring enable_tag_override for services Consul provides a feature of Service Definitions where the tags associated with a service can be modified through the Catalog API, overriding the value(s) configured in the agent's service configuration. To enable this feature, the flag enable_tag_override must be configured in the service definition. Previously, Nomad did not allow configuring this flag, and thus the default value of false was used. Now, it is configurable. Because Nomad itself acts as a state machine around the the service definitions of the tasks it manages, it's worth describing what happens when this feature is enabled and why. Consider the basic case where there is no Nomad, and your service is provided to consul as a boring JSON file. The ultimate source of truth for the definition of that service is the file, and is stored in the agent. Later, Consul performs "anti-entropy" which synchronizes the Catalog (stored only the leaders). Then with enable_tag_override=true, the tags field is available for "external" modification through the Catalog API (rather than directly configuring the service definition file, or using the Agent API). The important observation is that if the service definition ever changes (i.e. the file is changed & config reloaded OR the Agent API is used to modify the service), those "external" tag values are thrown away, and the new service definition is once again the source of truth. In the Nomad case, Nomad itself is the source of truth over the Agent in the same way the JSON file was the source of truth in the example above. That means any time Nomad sets a new service definition, any externally configured tags are going to be replaced. When does this happen? Only on major lifecycle events, for example when a task is modified because of an updated job spec from the 'nomad job run <existing>' command. Otherwise, Nomad's periodic re-sync's with Consul will now no longer try to restore the externally modified tag values (as long as enable_tag_override=true). Fixes #2057
2020-02-07 21:22:19 +00:00
t.Parallel()
ctx := setupFake(t)
client: enable configuring enable_tag_override for services Consul provides a feature of Service Definitions where the tags associated with a service can be modified through the Catalog API, overriding the value(s) configured in the agent's service configuration. To enable this feature, the flag enable_tag_override must be configured in the service definition. Previously, Nomad did not allow configuring this flag, and thus the default value of false was used. Now, it is configurable. Because Nomad itself acts as a state machine around the the service definitions of the tasks it manages, it's worth describing what happens when this feature is enabled and why. Consider the basic case where there is no Nomad, and your service is provided to consul as a boring JSON file. The ultimate source of truth for the definition of that service is the file, and is stored in the agent. Later, Consul performs "anti-entropy" which synchronizes the Catalog (stored only the leaders). Then with enable_tag_override=true, the tags field is available for "external" modification through the Catalog API (rather than directly configuring the service definition file, or using the Agent API). The important observation is that if the service definition ever changes (i.e. the file is changed & config reloaded OR the Agent API is used to modify the service), those "external" tag values are thrown away, and the new service definition is once again the source of truth. In the Nomad case, Nomad itself is the source of truth over the Agent in the same way the JSON file was the source of truth in the example above. That means any time Nomad sets a new service definition, any externally configured tags are going to be replaced. When does this happen? Only on major lifecycle events, for example when a task is modified because of an updated job spec from the 'nomad job run <existing>' command. Otherwise, Nomad's periodic re-sync's with Consul will now no longer try to restore the externally modified tag values (as long as enable_tag_override=true). Fixes #2057
2020-02-07 21:22:19 +00:00
r := require.New(t)
client: enable configuring enable_tag_override for services Consul provides a feature of Service Definitions where the tags associated with a service can be modified through the Catalog API, overriding the value(s) configured in the agent's service configuration. To enable this feature, the flag enable_tag_override must be configured in the service definition. Previously, Nomad did not allow configuring this flag, and thus the default value of false was used. Now, it is configurable. Because Nomad itself acts as a state machine around the the service definitions of the tasks it manages, it's worth describing what happens when this feature is enabled and why. Consider the basic case where there is no Nomad, and your service is provided to consul as a boring JSON file. The ultimate source of truth for the definition of that service is the file, and is stored in the agent. Later, Consul performs "anti-entropy" which synchronizes the Catalog (stored only the leaders). Then with enable_tag_override=true, the tags field is available for "external" modification through the Catalog API (rather than directly configuring the service definition file, or using the Agent API). The important observation is that if the service definition ever changes (i.e. the file is changed & config reloaded OR the Agent API is used to modify the service), those "external" tag values are thrown away, and the new service definition is once again the source of truth. In the Nomad case, Nomad itself is the source of truth over the Agent in the same way the JSON file was the source of truth in the example above. That means any time Nomad sets a new service definition, any externally configured tags are going to be replaced. When does this happen? Only on major lifecycle events, for example when a task is modified because of an updated job spec from the 'nomad job run <existing>' command. Otherwise, Nomad's periodic re-sync's with Consul will now no longer try to restore the externally modified tag values (as long as enable_tag_override=true). Fixes #2057
2020-02-07 21:22:19 +00:00
r.NoError(ctx.ServiceClient.RegisterWorkload(ctx.Workload))
r.NoError(ctx.syncOnce(syncNewOps))
r.Equal(1, len(ctx.FakeConsul.services), "Expected 1 service to be registered with Consul")
// Validate the alloc registration
reg1, err := ctx.ServiceClient.AllocRegistrations(ctx.Workload.AllocID)
client: enable configuring enable_tag_override for services Consul provides a feature of Service Definitions where the tags associated with a service can be modified through the Catalog API, overriding the value(s) configured in the agent's service configuration. To enable this feature, the flag enable_tag_override must be configured in the service definition. Previously, Nomad did not allow configuring this flag, and thus the default value of false was used. Now, it is configurable. Because Nomad itself acts as a state machine around the the service definitions of the tasks it manages, it's worth describing what happens when this feature is enabled and why. Consider the basic case where there is no Nomad, and your service is provided to consul as a boring JSON file. The ultimate source of truth for the definition of that service is the file, and is stored in the agent. Later, Consul performs "anti-entropy" which synchronizes the Catalog (stored only the leaders). Then with enable_tag_override=true, the tags field is available for "external" modification through the Catalog API (rather than directly configuring the service definition file, or using the Agent API). The important observation is that if the service definition ever changes (i.e. the file is changed & config reloaded OR the Agent API is used to modify the service), those "external" tag values are thrown away, and the new service definition is once again the source of truth. In the Nomad case, Nomad itself is the source of truth over the Agent in the same way the JSON file was the source of truth in the example above. That means any time Nomad sets a new service definition, any externally configured tags are going to be replaced. When does this happen? Only on major lifecycle events, for example when a task is modified because of an updated job spec from the 'nomad job run <existing>' command. Otherwise, Nomad's periodic re-sync's with Consul will now no longer try to restore the externally modified tag values (as long as enable_tag_override=true). Fixes #2057
2020-02-07 21:22:19 +00:00
r.NoError(err)
r.NotNil(reg1, "Unexpected nil alloc registration")
r.Equal(1, reg1.NumServices())
r.Equal(0, reg1.NumChecks())
client: enable configuring enable_tag_override for services Consul provides a feature of Service Definitions where the tags associated with a service can be modified through the Catalog API, overriding the value(s) configured in the agent's service configuration. To enable this feature, the flag enable_tag_override must be configured in the service definition. Previously, Nomad did not allow configuring this flag, and thus the default value of false was used. Now, it is configurable. Because Nomad itself acts as a state machine around the the service definitions of the tasks it manages, it's worth describing what happens when this feature is enabled and why. Consider the basic case where there is no Nomad, and your service is provided to consul as a boring JSON file. The ultimate source of truth for the definition of that service is the file, and is stored in the agent. Later, Consul performs "anti-entropy" which synchronizes the Catalog (stored only the leaders). Then with enable_tag_override=true, the tags field is available for "external" modification through the Catalog API (rather than directly configuring the service definition file, or using the Agent API). The important observation is that if the service definition ever changes (i.e. the file is changed & config reloaded OR the Agent API is used to modify the service), those "external" tag values are thrown away, and the new service definition is once again the source of truth. In the Nomad case, Nomad itself is the source of truth over the Agent in the same way the JSON file was the source of truth in the example above. That means any time Nomad sets a new service definition, any externally configured tags are going to be replaced. When does this happen? Only on major lifecycle events, for example when a task is modified because of an updated job spec from the 'nomad job run <existing>' command. Otherwise, Nomad's periodic re-sync's with Consul will now no longer try to restore the externally modified tag values (as long as enable_tag_override=true). Fixes #2057
2020-02-07 21:22:19 +00:00
serviceBefore := ctx.FakeConsul.lookupService("taskname-service")[0]
r.Equal(serviceBefore.Name, ctx.Workload.Services[0].Name)
r.Equal(serviceBefore.Tags, ctx.Workload.Services[0].Tags)
// Update the task definition
origWorkload := ctx.Workload.Copy()
client: enable configuring enable_tag_override for services Consul provides a feature of Service Definitions where the tags associated with a service can be modified through the Catalog API, overriding the value(s) configured in the agent's service configuration. To enable this feature, the flag enable_tag_override must be configured in the service definition. Previously, Nomad did not allow configuring this flag, and thus the default value of false was used. Now, it is configurable. Because Nomad itself acts as a state machine around the the service definitions of the tasks it manages, it's worth describing what happens when this feature is enabled and why. Consider the basic case where there is no Nomad, and your service is provided to consul as a boring JSON file. The ultimate source of truth for the definition of that service is the file, and is stored in the agent. Later, Consul performs "anti-entropy" which synchronizes the Catalog (stored only the leaders). Then with enable_tag_override=true, the tags field is available for "external" modification through the Catalog API (rather than directly configuring the service definition file, or using the Agent API). The important observation is that if the service definition ever changes (i.e. the file is changed & config reloaded OR the Agent API is used to modify the service), those "external" tag values are thrown away, and the new service definition is once again the source of truth. In the Nomad case, Nomad itself is the source of truth over the Agent in the same way the JSON file was the source of truth in the example above. That means any time Nomad sets a new service definition, any externally configured tags are going to be replaced. When does this happen? Only on major lifecycle events, for example when a task is modified because of an updated job spec from the 'nomad job run <existing>' command. Otherwise, Nomad's periodic re-sync's with Consul will now no longer try to restore the externally modified tag values (as long as enable_tag_override=true). Fixes #2057
2020-02-07 21:22:19 +00:00
ctx.Workload.Services[0].Tags[0] = "new-tag"
// Register and sync the update
client: enable configuring enable_tag_override for services Consul provides a feature of Service Definitions where the tags associated with a service can be modified through the Catalog API, overriding the value(s) configured in the agent's service configuration. To enable this feature, the flag enable_tag_override must be configured in the service definition. Previously, Nomad did not allow configuring this flag, and thus the default value of false was used. Now, it is configurable. Because Nomad itself acts as a state machine around the the service definitions of the tasks it manages, it's worth describing what happens when this feature is enabled and why. Consider the basic case where there is no Nomad, and your service is provided to consul as a boring JSON file. The ultimate source of truth for the definition of that service is the file, and is stored in the agent. Later, Consul performs "anti-entropy" which synchronizes the Catalog (stored only the leaders). Then with enable_tag_override=true, the tags field is available for "external" modification through the Catalog API (rather than directly configuring the service definition file, or using the Agent API). The important observation is that if the service definition ever changes (i.e. the file is changed & config reloaded OR the Agent API is used to modify the service), those "external" tag values are thrown away, and the new service definition is once again the source of truth. In the Nomad case, Nomad itself is the source of truth over the Agent in the same way the JSON file was the source of truth in the example above. That means any time Nomad sets a new service definition, any externally configured tags are going to be replaced. When does this happen? Only on major lifecycle events, for example when a task is modified because of an updated job spec from the 'nomad job run <existing>' command. Otherwise, Nomad's periodic re-sync's with Consul will now no longer try to restore the externally modified tag values (as long as enable_tag_override=true). Fixes #2057
2020-02-07 21:22:19 +00:00
r.NoError(ctx.ServiceClient.UpdateWorkload(origWorkload, ctx.Workload))
r.NoError(ctx.syncOnce(syncNewOps))
r.Equal(1, len(ctx.FakeConsul.services), "Expected 1 service to be registered with Consul")
// Validate the consul service definition changed
serviceAfter := ctx.FakeConsul.lookupService("taskname-service")[0]
r.Equal(serviceAfter.Name, ctx.Workload.Services[0].Name)
r.Equal(serviceAfter.Tags, ctx.Workload.Services[0].Tags)
r.Equal("new-tag", serviceAfter.Tags[0])
}
client: enable configuring enable_tag_override for services Consul provides a feature of Service Definitions where the tags associated with a service can be modified through the Catalog API, overriding the value(s) configured in the agent's service configuration. To enable this feature, the flag enable_tag_override must be configured in the service definition. Previously, Nomad did not allow configuring this flag, and thus the default value of false was used. Now, it is configurable. Because Nomad itself acts as a state machine around the the service definitions of the tasks it manages, it's worth describing what happens when this feature is enabled and why. Consider the basic case where there is no Nomad, and your service is provided to consul as a boring JSON file. The ultimate source of truth for the definition of that service is the file, and is stored in the agent. Later, Consul performs "anti-entropy" which synchronizes the Catalog (stored only the leaders). Then with enable_tag_override=true, the tags field is available for "external" modification through the Catalog API (rather than directly configuring the service definition file, or using the Agent API). The important observation is that if the service definition ever changes (i.e. the file is changed & config reloaded OR the Agent API is used to modify the service), those "external" tag values are thrown away, and the new service definition is once again the source of truth. In the Nomad case, Nomad itself is the source of truth over the Agent in the same way the JSON file was the source of truth in the example above. That means any time Nomad sets a new service definition, any externally configured tags are going to be replaced. When does this happen? Only on major lifecycle events, for example when a task is modified because of an updated job spec from the 'nomad job run <existing>' command. Otherwise, Nomad's periodic re-sync's with Consul will now no longer try to restore the externally modified tag values (as long as enable_tag_override=true). Fixes #2057
2020-02-07 21:22:19 +00:00
func TestConsul_EnableTagOverride_Syncs(t *testing.T) {
t.Parallel()
ctx := setupFake(t)
r := require.New(t)
// Configure our test service to set EnableTagOverride = true
ctx.Workload.Services[0].EnableTagOverride = true
r.NoError(ctx.ServiceClient.RegisterWorkload(ctx.Workload))
r.NoError(ctx.syncOnce(syncNewOps))
r.Equal(1, len(ctx.FakeConsul.services))
// Validate the alloc registration
reg1, err := ctx.ServiceClient.AllocRegistrations(ctx.Workload.AllocID)
r.NoError(err)
r.NotNil(reg1)
r.Equal(1, reg1.NumServices())
r.Equal(0, reg1.NumChecks())
const service = "taskname-service"
// sanity check things are what we expect
consulServiceDefBefore := ctx.FakeConsul.lookupService(service)[0]
r.Equal(ctx.Workload.Services[0].Name, consulServiceDefBefore.Name)
r.Equal([]string{"tag1", "tag2"}, consulServiceDefBefore.Tags)
r.True(consulServiceDefBefore.EnableTagOverride)
// manually set the tags in consul
ctx.FakeConsul.lookupService(service)[0].Tags = []string{"new", "tags"}
// do a periodic sync (which will respect EnableTagOverride)
r.NoError(ctx.syncOnce(syncPeriodic))
r.Equal(1, len(ctx.FakeConsul.services))
consulServiceDefAfter := ctx.FakeConsul.lookupService(service)[0]
r.Equal([]string{"new", "tags"}, consulServiceDefAfter.Tags) // manually set tags should still be there
// now do a new-ops sync (which will override EnableTagOverride)
r.NoError(ctx.ServiceClient.RegisterWorkload(ctx.Workload))
r.NoError(ctx.syncOnce(syncNewOps))
r.Equal(1, len(ctx.FakeConsul.services))
consulServiceDefUpdated := ctx.FakeConsul.lookupService(service)[0]
r.Equal([]string{"tag1", "tag2"}, consulServiceDefUpdated.Tags) // jobspec tags should be set now
}
// TestConsul_ChangePorts asserts that changing the ports on a service updates
// it in Consul. Pre-0.7.1 ports were not part of the service ID and this was a
// slightly different code path than changing tags.
func TestConsul_ChangePorts(t *testing.T) {
ctx := setupFake(t)
require := require.New(t)
ctx.Workload.Services[0].Checks = []*structs.ServiceCheck{
{
Name: "c1",
Type: "tcp",
Interval: time.Second,
Timeout: time.Second,
PortLabel: "x",
},
{
Name: "c2",
Type: "script",
Interval: 9000 * time.Hour,
Timeout: time.Second,
},
{
Name: "c3",
Type: "http",
Protocol: "http",
Path: "/",
Interval: time.Second,
Timeout: time.Second,
PortLabel: "y",
},
}
require.NoError(ctx.ServiceClient.RegisterWorkload(ctx.Workload))
client: enable configuring enable_tag_override for services Consul provides a feature of Service Definitions where the tags associated with a service can be modified through the Catalog API, overriding the value(s) configured in the agent's service configuration. To enable this feature, the flag enable_tag_override must be configured in the service definition. Previously, Nomad did not allow configuring this flag, and thus the default value of false was used. Now, it is configurable. Because Nomad itself acts as a state machine around the the service definitions of the tasks it manages, it's worth describing what happens when this feature is enabled and why. Consider the basic case where there is no Nomad, and your service is provided to consul as a boring JSON file. The ultimate source of truth for the definition of that service is the file, and is stored in the agent. Later, Consul performs "anti-entropy" which synchronizes the Catalog (stored only the leaders). Then with enable_tag_override=true, the tags field is available for "external" modification through the Catalog API (rather than directly configuring the service definition file, or using the Agent API). The important observation is that if the service definition ever changes (i.e. the file is changed & config reloaded OR the Agent API is used to modify the service), those "external" tag values are thrown away, and the new service definition is once again the source of truth. In the Nomad case, Nomad itself is the source of truth over the Agent in the same way the JSON file was the source of truth in the example above. That means any time Nomad sets a new service definition, any externally configured tags are going to be replaced. When does this happen? Only on major lifecycle events, for example when a task is modified because of an updated job spec from the 'nomad job run <existing>' command. Otherwise, Nomad's periodic re-sync's with Consul will now no longer try to restore the externally modified tag values (as long as enable_tag_override=true). Fixes #2057
2020-02-07 21:22:19 +00:00
require.NoError(ctx.syncOnce(syncNewOps))
require.Equal(1, len(ctx.FakeConsul.services), "Expected 1 service to be registered with Consul")
for _, v := range ctx.FakeConsul.services {
require.Equal(ctx.Workload.Services[0].Name, v.Name)
require.Equal(ctx.Workload.Services[0].Tags, v.Tags)
require.Equal(xPort, v.Port)
}
require.Len(ctx.FakeConsul.checks, 3)
origTCPKey := ""
origScriptKey := ""
origHTTPKey := ""
for k, v := range ctx.FakeConsul.checks {
switch v.Name {
case "c1":
origTCPKey = k
require.Equal(fmt.Sprintf(":%d", xPort), v.TCP)
case "c2":
origScriptKey = k
case "c3":
origHTTPKey = k
require.Equal(fmt.Sprintf("http://:%d/", yPort), v.HTTP)
default:
t.Fatalf("unexpected check: %q", v.Name)
}
}
require.NotEmpty(origTCPKey)
require.NotEmpty(origScriptKey)
require.NotEmpty(origHTTPKey)
// Now update the PortLabel on the Service and Check c3
origWorkload := ctx.Workload.Copy()
ctx.Workload.Services[0].PortLabel = "y"
ctx.Workload.Services[0].Checks = []*structs.ServiceCheck{
{
Name: "c1",
Type: "tcp",
Interval: time.Second,
Timeout: time.Second,
PortLabel: "x",
},
{
Name: "c2",
Type: "script",
Interval: 9000 * time.Hour,
Timeout: time.Second,
},
{
Name: "c3",
Type: "http",
Protocol: "http",
Path: "/",
Interval: time.Second,
Timeout: time.Second,
// Removed PortLabel; should default to service's (y)
},
}
require.NoError(ctx.ServiceClient.UpdateWorkload(origWorkload, ctx.Workload))
client: enable configuring enable_tag_override for services Consul provides a feature of Service Definitions where the tags associated with a service can be modified through the Catalog API, overriding the value(s) configured in the agent's service configuration. To enable this feature, the flag enable_tag_override must be configured in the service definition. Previously, Nomad did not allow configuring this flag, and thus the default value of false was used. Now, it is configurable. Because Nomad itself acts as a state machine around the the service definitions of the tasks it manages, it's worth describing what happens when this feature is enabled and why. Consider the basic case where there is no Nomad, and your service is provided to consul as a boring JSON file. The ultimate source of truth for the definition of that service is the file, and is stored in the agent. Later, Consul performs "anti-entropy" which synchronizes the Catalog (stored only the leaders). Then with enable_tag_override=true, the tags field is available for "external" modification through the Catalog API (rather than directly configuring the service definition file, or using the Agent API). The important observation is that if the service definition ever changes (i.e. the file is changed & config reloaded OR the Agent API is used to modify the service), those "external" tag values are thrown away, and the new service definition is once again the source of truth. In the Nomad case, Nomad itself is the source of truth over the Agent in the same way the JSON file was the source of truth in the example above. That means any time Nomad sets a new service definition, any externally configured tags are going to be replaced. When does this happen? Only on major lifecycle events, for example when a task is modified because of an updated job spec from the 'nomad job run <existing>' command. Otherwise, Nomad's periodic re-sync's with Consul will now no longer try to restore the externally modified tag values (as long as enable_tag_override=true). Fixes #2057
2020-02-07 21:22:19 +00:00
require.NoError(ctx.syncOnce(syncNewOps))
require.Equal(1, len(ctx.FakeConsul.services), "Expected 1 service to be registered with Consul")
for _, v := range ctx.FakeConsul.services {
require.Equal(ctx.Workload.Services[0].Name, v.Name)
require.Equal(ctx.Workload.Services[0].Tags, v.Tags)
require.Equal(yPort, v.Port)
}
require.Equal(3, len(ctx.FakeConsul.checks))
for k, v := range ctx.FakeConsul.checks {
switch v.Name {
case "c1":
// C1 is changed because the service was re-registered
require.NotEqual(origTCPKey, k)
require.Equal(fmt.Sprintf(":%d", xPort), v.TCP)
case "c2":
// C2 is changed because the service was re-registered
require.NotEqual(origScriptKey, k)
case "c3":
require.NotEqual(origHTTPKey, k)
require.Equal(fmt.Sprintf("http://:%d/", yPort), v.HTTP)
default:
t.Errorf("Unknown check: %q", k)
}
}
}
// TestConsul_ChangeChecks asserts that updating only the checks on a service
// properly syncs with Consul.
func TestConsul_ChangeChecks(t *testing.T) {
ctx := setupFake(t)
ctx.Workload.Services[0].Checks = []*structs.ServiceCheck{
{
Name: "c1",
Type: "tcp",
Interval: time.Second,
Timeout: time.Second,
PortLabel: "x",
2017-09-14 22:17:21 +00:00
CheckRestart: &structs.CheckRestart{
Limit: 3,
},
},
}
if err := ctx.ServiceClient.RegisterWorkload(ctx.Workload); err != nil {
t.Fatalf("unexpected error registering task: %v", err)
}
client: enable configuring enable_tag_override for services Consul provides a feature of Service Definitions where the tags associated with a service can be modified through the Catalog API, overriding the value(s) configured in the agent's service configuration. To enable this feature, the flag enable_tag_override must be configured in the service definition. Previously, Nomad did not allow configuring this flag, and thus the default value of false was used. Now, it is configurable. Because Nomad itself acts as a state machine around the the service definitions of the tasks it manages, it's worth describing what happens when this feature is enabled and why. Consider the basic case where there is no Nomad, and your service is provided to consul as a boring JSON file. The ultimate source of truth for the definition of that service is the file, and is stored in the agent. Later, Consul performs "anti-entropy" which synchronizes the Catalog (stored only the leaders). Then with enable_tag_override=true, the tags field is available for "external" modification through the Catalog API (rather than directly configuring the service definition file, or using the Agent API). The important observation is that if the service definition ever changes (i.e. the file is changed & config reloaded OR the Agent API is used to modify the service), those "external" tag values are thrown away, and the new service definition is once again the source of truth. In the Nomad case, Nomad itself is the source of truth over the Agent in the same way the JSON file was the source of truth in the example above. That means any time Nomad sets a new service definition, any externally configured tags are going to be replaced. When does this happen? Only on major lifecycle events, for example when a task is modified because of an updated job spec from the 'nomad job run <existing>' command. Otherwise, Nomad's periodic re-sync's with Consul will now no longer try to restore the externally modified tag values (as long as enable_tag_override=true). Fixes #2057
2020-02-07 21:22:19 +00:00
if err := ctx.syncOnce(syncNewOps); err != nil {
t.Fatalf("unexpected error syncing task: %v", err)
}
if n := len(ctx.FakeConsul.services); n != 1 {
t.Fatalf("expected 1 service but found %d:\n%#v", n, ctx.FakeConsul.services)
}
2017-09-14 22:17:21 +00:00
// Assert a check restart watch update was enqueued and clear it
if n := len(ctx.ServiceClient.checkWatcher.checkUpdateCh); n != 1 {
t.Fatalf("expected 1 check restart update but found %d", n)
}
upd := <-ctx.ServiceClient.checkWatcher.checkUpdateCh
c1ID := upd.checkID
// Query the allocs registrations and then again when we update. The IDs
// should change
reg1, err := ctx.ServiceClient.AllocRegistrations(ctx.Workload.AllocID)
if err != nil {
t.Fatalf("Looking up alloc registration failed: %v", err)
}
if reg1 == nil {
t.Fatalf("Nil alloc registrations: %v", err)
}
if num := reg1.NumServices(); num != 1 {
2018-03-11 18:53:58 +00:00
t.Fatalf("Wrong number of services: got %d; want 1", num)
}
if num := reg1.NumChecks(); num != 1 {
t.Fatalf("Wrong number of checks: got %d; want 1", num)
}
origServiceKey := ""
for k, v := range ctx.FakeConsul.services {
origServiceKey = k
if v.Name != ctx.Workload.Services[0].Name {
t.Errorf("expected Name=%q != %q", ctx.Workload.Services[0].Name, v.Name)
}
if v.Port != xPort {
t.Errorf("expected Port x=%v but found: %v", xPort, v.Port)
}
}
if n := len(ctx.FakeConsul.checks); n != 1 {
t.Fatalf("expected 1 check but found %d:\n%#v", n, ctx.FakeConsul.checks)
}
for _, v := range ctx.FakeConsul.checks {
if v.Name != "c1" {
t.Fatalf("expected check c1 but found %q", v.Name)
}
}
// Now add a check and modify the original
origWorkload := ctx.Workload.Copy()
ctx.Workload.Services[0].Checks = []*structs.ServiceCheck{
{
Name: "c1",
Type: "tcp",
Interval: 2 * time.Second,
Timeout: time.Second,
PortLabel: "x",
2017-09-14 22:17:21 +00:00
CheckRestart: &structs.CheckRestart{
Limit: 3,
},
},
{
Name: "c2",
Type: "http",
Path: "/",
Interval: time.Second,
Timeout: time.Second,
PortLabel: "x",
},
}
if err := ctx.ServiceClient.UpdateWorkload(origWorkload, ctx.Workload); err != nil {
t.Fatalf("unexpected error registering task: %v", err)
}
2017-09-14 22:17:21 +00:00
// Assert 2 check restart watch updates was enqueued
if n := len(ctx.ServiceClient.checkWatcher.checkUpdateCh); n != 2 {
t.Fatalf("expected 2 check restart updates but found %d", n)
}
// First the new watch
upd = <-ctx.ServiceClient.checkWatcher.checkUpdateCh
if upd.checkID == c1ID || upd.remove {
t.Fatalf("expected check watch update to be an add of checkID=%q but found remove=%t checkID=%q",
c1ID, upd.remove, upd.checkID)
}
// Then remove the old watch
upd = <-ctx.ServiceClient.checkWatcher.checkUpdateCh
if upd.checkID != c1ID || !upd.remove {
t.Fatalf("expected check watch update to be a removal of checkID=%q but found remove=%t checkID=%q",
c1ID, upd.remove, upd.checkID)
}
client: enable configuring enable_tag_override for services Consul provides a feature of Service Definitions where the tags associated with a service can be modified through the Catalog API, overriding the value(s) configured in the agent's service configuration. To enable this feature, the flag enable_tag_override must be configured in the service definition. Previously, Nomad did not allow configuring this flag, and thus the default value of false was used. Now, it is configurable. Because Nomad itself acts as a state machine around the the service definitions of the tasks it manages, it's worth describing what happens when this feature is enabled and why. Consider the basic case where there is no Nomad, and your service is provided to consul as a boring JSON file. The ultimate source of truth for the definition of that service is the file, and is stored in the agent. Later, Consul performs "anti-entropy" which synchronizes the Catalog (stored only the leaders). Then with enable_tag_override=true, the tags field is available for "external" modification through the Catalog API (rather than directly configuring the service definition file, or using the Agent API). The important observation is that if the service definition ever changes (i.e. the file is changed & config reloaded OR the Agent API is used to modify the service), those "external" tag values are thrown away, and the new service definition is once again the source of truth. In the Nomad case, Nomad itself is the source of truth over the Agent in the same way the JSON file was the source of truth in the example above. That means any time Nomad sets a new service definition, any externally configured tags are going to be replaced. When does this happen? Only on major lifecycle events, for example when a task is modified because of an updated job spec from the 'nomad job run <existing>' command. Otherwise, Nomad's periodic re-sync's with Consul will now no longer try to restore the externally modified tag values (as long as enable_tag_override=true). Fixes #2057
2020-02-07 21:22:19 +00:00
if err := ctx.syncOnce(syncNewOps); err != nil {
t.Fatalf("unexpected error syncing task: %v", err)
}
if n := len(ctx.FakeConsul.services); n != 1 {
t.Fatalf("expected 1 service but found %d:\n%#v", n, ctx.FakeConsul.services)
}
if _, ok := ctx.FakeConsul.services[origServiceKey]; !ok {
t.Errorf("unexpected key change; was: %q -- but found %#v", origServiceKey, ctx.FakeConsul.services)
}
if n := len(ctx.FakeConsul.checks); n != 2 {
t.Fatalf("expected 2 check but found %d:\n%#v", n, ctx.FakeConsul.checks)
}
for k, v := range ctx.FakeConsul.checks {
switch v.Name {
case "c1":
if expected := fmt.Sprintf(":%d", xPort); v.TCP != expected {
t.Errorf("expected Port x=%v but found: %v", expected, v.TCP)
}
2017-09-14 22:17:21 +00:00
// update id
c1ID = k
case "c2":
if expected := fmt.Sprintf("http://:%d/", xPort); v.HTTP != expected {
t.Errorf("expected Port x=%v but found: %v", expected, v.HTTP)
}
default:
t.Errorf("Unknown check: %q", k)
}
}
// Check again and ensure the IDs changed
reg2, err := ctx.ServiceClient.AllocRegistrations(ctx.Workload.AllocID)
if err != nil {
t.Fatalf("Looking up alloc registration failed: %v", err)
}
if reg2 == nil {
t.Fatalf("Nil alloc registrations: %v", err)
}
if num := reg2.NumServices(); num != 1 {
2018-03-11 18:53:58 +00:00
t.Fatalf("Wrong number of services: got %d; want 1", num)
}
if num := reg2.NumChecks(); num != 2 {
t.Fatalf("Wrong number of checks: got %d; want 2", num)
}
for task, treg := range reg1.Tasks {
otherTaskReg, ok := reg2.Tasks[task]
if !ok {
t.Fatalf("Task %q not in second reg", task)
}
for sID, sreg := range treg.Services {
otherServiceReg, ok := otherTaskReg.Services[sID]
if !ok {
t.Fatalf("service ID changed")
}
for newID := range sreg.checkIDs {
if _, ok := otherServiceReg.checkIDs[newID]; ok {
t.Fatalf("check IDs should change")
}
}
}
}
2017-09-14 22:17:21 +00:00
// Alter a CheckRestart and make sure the watcher is updated but nothing else
origWorkload = ctx.Workload.Copy()
ctx.Workload.Services[0].Checks = []*structs.ServiceCheck{
2017-09-14 22:17:21 +00:00
{
Name: "c1",
Type: "tcp",
Interval: 2 * time.Second,
Timeout: time.Second,
PortLabel: "x",
CheckRestart: &structs.CheckRestart{
Limit: 11,
},
},
{
Name: "c2",
Type: "http",
Path: "/",
Interval: time.Second,
Timeout: time.Second,
PortLabel: "x",
},
}
if err := ctx.ServiceClient.UpdateWorkload(origWorkload, ctx.Workload); err != nil {
2017-09-14 22:17:21 +00:00
t.Fatalf("unexpected error registering task: %v", err)
}
client: enable configuring enable_tag_override for services Consul provides a feature of Service Definitions where the tags associated with a service can be modified through the Catalog API, overriding the value(s) configured in the agent's service configuration. To enable this feature, the flag enable_tag_override must be configured in the service definition. Previously, Nomad did not allow configuring this flag, and thus the default value of false was used. Now, it is configurable. Because Nomad itself acts as a state machine around the the service definitions of the tasks it manages, it's worth describing what happens when this feature is enabled and why. Consider the basic case where there is no Nomad, and your service is provided to consul as a boring JSON file. The ultimate source of truth for the definition of that service is the file, and is stored in the agent. Later, Consul performs "anti-entropy" which synchronizes the Catalog (stored only the leaders). Then with enable_tag_override=true, the tags field is available for "external" modification through the Catalog API (rather than directly configuring the service definition file, or using the Agent API). The important observation is that if the service definition ever changes (i.e. the file is changed & config reloaded OR the Agent API is used to modify the service), those "external" tag values are thrown away, and the new service definition is once again the source of truth. In the Nomad case, Nomad itself is the source of truth over the Agent in the same way the JSON file was the source of truth in the example above. That means any time Nomad sets a new service definition, any externally configured tags are going to be replaced. When does this happen? Only on major lifecycle events, for example when a task is modified because of an updated job spec from the 'nomad job run <existing>' command. Otherwise, Nomad's periodic re-sync's with Consul will now no longer try to restore the externally modified tag values (as long as enable_tag_override=true). Fixes #2057
2020-02-07 21:22:19 +00:00
if err := ctx.syncOnce(syncNewOps); err != nil {
2017-09-14 22:17:21 +00:00
t.Fatalf("unexpected error syncing task: %v", err)
}
if n := len(ctx.FakeConsul.checks); n != 2 {
t.Fatalf("expected 2 check but found %d:\n%#v", n, ctx.FakeConsul.checks)
}
for k, v := range ctx.FakeConsul.checks {
if v.Name == "c1" {
if k != c1ID {
t.Errorf("expected c1 to still have id %q but found %q", c1ID, k)
}
break
}
}
// Assert a check restart watch update was enqueued for a removal and an add
if n := len(ctx.ServiceClient.checkWatcher.checkUpdateCh); n != 1 {
t.Fatalf("expected 1 check restart update but found %d", n)
}
<-ctx.ServiceClient.checkWatcher.checkUpdateCh
}
// TestConsul_RegServices tests basic service registration.
func TestConsul_RegServices(t *testing.T) {
ctx := setupFake(t)
2017-09-14 22:17:21 +00:00
// Add a check w/restarting
ctx.Workload.Services[0].Checks = []*structs.ServiceCheck{
2017-09-14 22:17:21 +00:00
{
Name: "testcheck",
Type: "tcp",
Interval: 100 * time.Millisecond,
CheckRestart: &structs.CheckRestart{
Limit: 3,
},
},
}
if err := ctx.ServiceClient.RegisterWorkload(ctx.Workload); err != nil {
t.Fatalf("unexpected error registering task: %v", err)
}
client: enable configuring enable_tag_override for services Consul provides a feature of Service Definitions where the tags associated with a service can be modified through the Catalog API, overriding the value(s) configured in the agent's service configuration. To enable this feature, the flag enable_tag_override must be configured in the service definition. Previously, Nomad did not allow configuring this flag, and thus the default value of false was used. Now, it is configurable. Because Nomad itself acts as a state machine around the the service definitions of the tasks it manages, it's worth describing what happens when this feature is enabled and why. Consider the basic case where there is no Nomad, and your service is provided to consul as a boring JSON file. The ultimate source of truth for the definition of that service is the file, and is stored in the agent. Later, Consul performs "anti-entropy" which synchronizes the Catalog (stored only the leaders). Then with enable_tag_override=true, the tags field is available for "external" modification through the Catalog API (rather than directly configuring the service definition file, or using the Agent API). The important observation is that if the service definition ever changes (i.e. the file is changed & config reloaded OR the Agent API is used to modify the service), those "external" tag values are thrown away, and the new service definition is once again the source of truth. In the Nomad case, Nomad itself is the source of truth over the Agent in the same way the JSON file was the source of truth in the example above. That means any time Nomad sets a new service definition, any externally configured tags are going to be replaced. When does this happen? Only on major lifecycle events, for example when a task is modified because of an updated job spec from the 'nomad job run <existing>' command. Otherwise, Nomad's periodic re-sync's with Consul will now no longer try to restore the externally modified tag values (as long as enable_tag_override=true). Fixes #2057
2020-02-07 21:22:19 +00:00
if err := ctx.syncOnce(syncNewOps); err != nil {
t.Fatalf("unexpected error syncing task: %v", err)
}
if n := len(ctx.FakeConsul.services); n != 1 {
t.Fatalf("expected 1 service but found %d:\n%#v", n, ctx.FakeConsul.services)
}
2017-09-14 22:17:21 +00:00
for _, v := range ctx.FakeConsul.services {
if v.Name != ctx.Workload.Services[0].Name {
t.Errorf("expected Name=%q != %q", ctx.Workload.Services[0].Name, v.Name)
}
if !reflect.DeepEqual(v.Tags, ctx.Workload.Services[0].Tags) {
t.Errorf("expected Tags=%v != %v", ctx.Workload.Services[0].Tags, v.Tags)
}
if v.Port != xPort {
t.Errorf("expected Port=%d != %d", xPort, v.Port)
}
}
2017-09-14 22:17:21 +00:00
// Assert the check update is pending
if n := len(ctx.ServiceClient.checkWatcher.checkUpdateCh); n != 1 {
t.Fatalf("expected 1 check restart update but found %d", n)
}
// Assert the check update is properly formed
checkUpd := <-ctx.ServiceClient.checkWatcher.checkUpdateCh
if checkUpd.checkRestart.allocID != ctx.Workload.AllocID {
2017-09-14 22:17:21 +00:00
t.Fatalf("expected check's allocid to be %q but found %q", "allocid", checkUpd.checkRestart.allocID)
}
if expected := 200 * time.Millisecond; checkUpd.checkRestart.timeLimit != expected {
t.Fatalf("expected check's time limit to be %v but found %v", expected, checkUpd.checkRestart.timeLimit)
}
// Make a change which will register a new service
ctx.Workload.Services[0].Name = "taskname-service2"
ctx.Workload.Services[0].Tags[0] = "tag3"
if err := ctx.ServiceClient.RegisterWorkload(ctx.Workload); err != nil {
2018-03-11 19:08:07 +00:00
t.Fatalf("unexpected error registering task: %v", err)
}
2017-09-14 22:17:21 +00:00
// Assert check update is pending
if n := len(ctx.ServiceClient.checkWatcher.checkUpdateCh); n != 1 {
t.Fatalf("expected 1 check restart update but found %d", n)
}
// Assert the check update's id has changed
checkUpd2 := <-ctx.ServiceClient.checkWatcher.checkUpdateCh
if checkUpd.checkID == checkUpd2.checkID {
t.Fatalf("expected new check update to have a new ID both both have: %q", checkUpd.checkID)
}
// Make sure changes don't take affect until sync() is called (since
// Run() isn't running)
if n := len(ctx.FakeConsul.services); n != 1 {
t.Fatalf("expected 1 service but found %d:\n%#v", n, ctx.FakeConsul.services)
}
for _, v := range ctx.FakeConsul.services {
if reflect.DeepEqual(v.Tags, ctx.Workload.Services[0].Tags) {
t.Errorf("expected Tags to differ, changes applied before sync()")
}
}
// Now sync() and re-check for the applied updates
client: enable configuring enable_tag_override for services Consul provides a feature of Service Definitions where the tags associated with a service can be modified through the Catalog API, overriding the value(s) configured in the agent's service configuration. To enable this feature, the flag enable_tag_override must be configured in the service definition. Previously, Nomad did not allow configuring this flag, and thus the default value of false was used. Now, it is configurable. Because Nomad itself acts as a state machine around the the service definitions of the tasks it manages, it's worth describing what happens when this feature is enabled and why. Consider the basic case where there is no Nomad, and your service is provided to consul as a boring JSON file. The ultimate source of truth for the definition of that service is the file, and is stored in the agent. Later, Consul performs "anti-entropy" which synchronizes the Catalog (stored only the leaders). Then with enable_tag_override=true, the tags field is available for "external" modification through the Catalog API (rather than directly configuring the service definition file, or using the Agent API). The important observation is that if the service definition ever changes (i.e. the file is changed & config reloaded OR the Agent API is used to modify the service), those "external" tag values are thrown away, and the new service definition is once again the source of truth. In the Nomad case, Nomad itself is the source of truth over the Agent in the same way the JSON file was the source of truth in the example above. That means any time Nomad sets a new service definition, any externally configured tags are going to be replaced. When does this happen? Only on major lifecycle events, for example when a task is modified because of an updated job spec from the 'nomad job run <existing>' command. Otherwise, Nomad's periodic re-sync's with Consul will now no longer try to restore the externally modified tag values (as long as enable_tag_override=true). Fixes #2057
2020-02-07 21:22:19 +00:00
if err := ctx.syncOnce(syncNewOps); err != nil {
t.Fatalf("unexpected error syncing task: %v", err)
}
if n := len(ctx.FakeConsul.services); n != 2 {
t.Fatalf("expected 2 services but found %d:\n%#v", n, ctx.FakeConsul.services)
}
found := false
for _, v := range ctx.FakeConsul.services {
if v.Name == ctx.Workload.Services[0].Name {
if found {
t.Fatalf("found new service name %q twice", v.Name)
}
found = true
if !reflect.DeepEqual(v.Tags, ctx.Workload.Services[0].Tags) {
t.Errorf("expected Tags=%v != %v", ctx.Workload.Services[0].Tags, v.Tags)
}
}
}
if !found {
t.Fatalf("did not find new service %q", ctx.Workload.Services[0].Name)
}
// Remove the new task
ctx.ServiceClient.RemoveWorkload(ctx.Workload)
client: enable configuring enable_tag_override for services Consul provides a feature of Service Definitions where the tags associated with a service can be modified through the Catalog API, overriding the value(s) configured in the agent's service configuration. To enable this feature, the flag enable_tag_override must be configured in the service definition. Previously, Nomad did not allow configuring this flag, and thus the default value of false was used. Now, it is configurable. Because Nomad itself acts as a state machine around the the service definitions of the tasks it manages, it's worth describing what happens when this feature is enabled and why. Consider the basic case where there is no Nomad, and your service is provided to consul as a boring JSON file. The ultimate source of truth for the definition of that service is the file, and is stored in the agent. Later, Consul performs "anti-entropy" which synchronizes the Catalog (stored only the leaders). Then with enable_tag_override=true, the tags field is available for "external" modification through the Catalog API (rather than directly configuring the service definition file, or using the Agent API). The important observation is that if the service definition ever changes (i.e. the file is changed & config reloaded OR the Agent API is used to modify the service), those "external" tag values are thrown away, and the new service definition is once again the source of truth. In the Nomad case, Nomad itself is the source of truth over the Agent in the same way the JSON file was the source of truth in the example above. That means any time Nomad sets a new service definition, any externally configured tags are going to be replaced. When does this happen? Only on major lifecycle events, for example when a task is modified because of an updated job spec from the 'nomad job run <existing>' command. Otherwise, Nomad's periodic re-sync's with Consul will now no longer try to restore the externally modified tag values (as long as enable_tag_override=true). Fixes #2057
2020-02-07 21:22:19 +00:00
if err := ctx.syncOnce(syncNewOps); err != nil {
t.Fatalf("unexpected error syncing task: %v", err)
}
if n := len(ctx.FakeConsul.services); n != 1 {
t.Fatalf("expected 1 service but found %d:\n%#v", n, ctx.FakeConsul.services)
}
for _, v := range ctx.FakeConsul.services {
if v.Name != "taskname-service" {
t.Errorf("expected original task to survive not %q", v.Name)
}
}
2017-09-14 22:17:21 +00:00
// Assert check update is pending
if n := len(ctx.ServiceClient.checkWatcher.checkUpdateCh); n != 1 {
t.Fatalf("expected 1 check restart update but found %d", n)
}
// Assert the check update's id is correct and that it's a removal
checkUpd3 := <-ctx.ServiceClient.checkWatcher.checkUpdateCh
if checkUpd2.checkID != checkUpd3.checkID {
t.Fatalf("expected checkid %q but found %q", checkUpd2.checkID, checkUpd3.checkID)
}
if !checkUpd3.remove {
t.Fatalf("expected check watch removal update but found: %#v", checkUpd3)
}
}
// TestConsul_ShutdownOK tests the ok path for the shutdown logic in
// ServiceClient.
func TestConsul_ShutdownOK(t *testing.T) {
require := require.New(t)
ctx := setupFake(t)
go ctx.ServiceClient.Run()
// register the Nomad agent service and check
agentServices := []*structs.Service{
{
Name: "http",
Tags: []string{"nomad"},
PortLabel: "localhost:2345",
Checks: []*structs.ServiceCheck{
{
Name: "nomad-tcp",
Type: "tcp",
Interval: 9000 * time.Hour, // make check block
Timeout: 10 * time.Second,
InitialStatus: "warning",
},
},
},
}
require.NoError(ctx.ServiceClient.RegisterAgent("client", agentServices))
require.Eventually(ctx.ServiceClient.hasSeen, time.Second, 10*time.Millisecond)
// assert successful registration
require.Len(ctx.FakeConsul.services, 1, "expected agent service to be registered")
require.Len(ctx.FakeConsul.checks, 1, "expected agent check to be registered")
require.Contains(ctx.FakeConsul.services,
makeAgentServiceID("client", agentServices[0]))
// Shutdown() should block until Nomad agent service/check is deregistered
require.NoError(ctx.ServiceClient.Shutdown())
require.Len(ctx.FakeConsul.services, 0, "expected agent service to be deregistered")
require.Len(ctx.FakeConsul.checks, 0, "expected agent check to be deregistered")
}
// TestConsul_ShutdownBlocked tests the blocked past deadline path for the
// shutdown logic in ServiceClient.
func TestConsul_ShutdownBlocked(t *testing.T) {
require := require.New(t)
t.Parallel()
ctx := setupFake(t)
// can be short because we're intentionally blocking, but needs to
// be longer than the time we'll block Consul so we can be sure
// we're not delayed either.
ctx.ServiceClient.shutdownWait = time.Second
go ctx.ServiceClient.Run()
// register the Nomad agent service and check
agentServices := []*structs.Service{
{
Name: "http",
Tags: []string{"nomad"},
PortLabel: "localhost:2345",
Checks: []*structs.ServiceCheck{
{
Name: "nomad-tcp",
Type: "tcp",
Interval: 9000 * time.Hour, // make check block
Timeout: 10 * time.Second,
InitialStatus: "warning",
},
},
},
}
require.NoError(ctx.ServiceClient.RegisterAgent("client", agentServices))
require.Eventually(ctx.ServiceClient.hasSeen, time.Second, 10*time.Millisecond)
require.Len(ctx.FakeConsul.services, 1, "expected agent service to be registered")
require.Len(ctx.FakeConsul.checks, 1, "expected agent check to be registered")
// prevent normal shutdown by blocking Consul. the shutdown should wait
// until agent deregistration has finished
waiter := make(chan struct{})
result := make(chan error)
go func() {
ctx.FakeConsul.mu.Lock()
close(waiter)
result <- ctx.ServiceClient.Shutdown()
}()
<-waiter // wait for lock to be hit
// Shutdown should block until all enqueued operations finish.
preShutdown := time.Now()
select {
case <-time.After(200 * time.Millisecond):
ctx.FakeConsul.mu.Unlock()
require.NoError(<-result)
case <-result:
t.Fatal("should not have received result until Consul unblocked")
}
shutdownTime := time.Now().Sub(preShutdown).Seconds()
require.Less(shutdownTime, time.Second.Seconds(),
"expected shutdown to take >200ms and <1s")
require.Greater(shutdownTime, 200*time.Millisecond.Seconds(),
"expected shutdown to take >200ms and <1s")
require.Len(ctx.FakeConsul.services, 0,
"expected agent service to be deregistered")
require.Len(ctx.FakeConsul.checks, 0,
"expected agent check to be deregistered")
}
// TestConsul_DriverNetwork_AutoUse asserts that if a driver network has
// auto-use set then services should advertise it unless explicitly set to
// host. Checks should always use host.
func TestConsul_DriverNetwork_AutoUse(t *testing.T) {
t.Parallel()
ctx := setupFake(t)
ctx.Workload.Services = []*structs.Service{
{
Name: "auto-advertise-x",
PortLabel: "x",
AddressMode: structs.AddressModeAuto,
Checks: []*structs.ServiceCheck{
{
Name: "default-check-x",
Type: "tcp",
Interval: time.Second,
Timeout: time.Second,
},
{
Name: "weird-y-check",
Type: "http",
Interval: time.Second,
Timeout: time.Second,
PortLabel: "y",
},
},
},
{
Name: "driver-advertise-y",
PortLabel: "y",
AddressMode: structs.AddressModeDriver,
Checks: []*structs.ServiceCheck{
{
Name: "default-check-y",
Type: "tcp",
Interval: time.Second,
Timeout: time.Second,
},
},
},
{
Name: "host-advertise-y",
PortLabel: "y",
AddressMode: structs.AddressModeHost,
},
}
ctx.Workload.DriverNetwork = &drivers.DriverNetwork{
PortMap: map[string]int{
"x": 8888,
"y": 9999,
},
IP: "172.18.0.2",
AutoAdvertise: true,
}
if err := ctx.ServiceClient.RegisterWorkload(ctx.Workload); err != nil {
t.Fatalf("unexpected error registering task: %v", err)
}
client: enable configuring enable_tag_override for services Consul provides a feature of Service Definitions where the tags associated with a service can be modified through the Catalog API, overriding the value(s) configured in the agent's service configuration. To enable this feature, the flag enable_tag_override must be configured in the service definition. Previously, Nomad did not allow configuring this flag, and thus the default value of false was used. Now, it is configurable. Because Nomad itself acts as a state machine around the the service definitions of the tasks it manages, it's worth describing what happens when this feature is enabled and why. Consider the basic case where there is no Nomad, and your service is provided to consul as a boring JSON file. The ultimate source of truth for the definition of that service is the file, and is stored in the agent. Later, Consul performs "anti-entropy" which synchronizes the Catalog (stored only the leaders). Then with enable_tag_override=true, the tags field is available for "external" modification through the Catalog API (rather than directly configuring the service definition file, or using the Agent API). The important observation is that if the service definition ever changes (i.e. the file is changed & config reloaded OR the Agent API is used to modify the service), those "external" tag values are thrown away, and the new service definition is once again the source of truth. In the Nomad case, Nomad itself is the source of truth over the Agent in the same way the JSON file was the source of truth in the example above. That means any time Nomad sets a new service definition, any externally configured tags are going to be replaced. When does this happen? Only on major lifecycle events, for example when a task is modified because of an updated job spec from the 'nomad job run <existing>' command. Otherwise, Nomad's periodic re-sync's with Consul will now no longer try to restore the externally modified tag values (as long as enable_tag_override=true). Fixes #2057
2020-02-07 21:22:19 +00:00
if err := ctx.syncOnce(syncNewOps); err != nil {
t.Fatalf("unexpected error syncing task: %v", err)
}
if n := len(ctx.FakeConsul.services); n != 3 {
t.Fatalf("expected 2 services but found: %d", n)
}
for _, v := range ctx.FakeConsul.services {
switch v.Name {
case ctx.Workload.Services[0].Name: // x
// Since DriverNetwork.AutoAdvertise=true, driver ports should be used
if v.Port != ctx.Workload.DriverNetwork.PortMap["x"] {
t.Errorf("expected service %s's port to be %d but found %d",
v.Name, ctx.Workload.DriverNetwork.PortMap["x"], v.Port)
}
// The order of checks in Consul is not guaranteed to
// be the same as their order in the Workload definition,
// so check in a loop
if expected := 2; len(v.Checks) != expected {
2017-06-26 19:53:43 +00:00
t.Errorf("expected %d checks but found %d", expected, len(v.Checks))
}
for _, c := range v.Checks {
// No name on AgentServiceChecks, use type
switch {
case c.TCP != "":
// Checks should always use host port though
if c.TCP != ":1234" { // xPort
2018-03-11 17:57:01 +00:00
t.Errorf("expected service %s check 1's port to be %d but found %q",
v.Name, xPort, c.TCP)
}
case c.HTTP != "":
if c.HTTP != "http://:1235" { // yPort
2018-03-11 17:57:01 +00:00
t.Errorf("expected service %s check 2's port to be %d but found %q",
v.Name, yPort, c.HTTP)
}
default:
t.Errorf("unexpected check %#v on service %q", c, v.Name)
}
}
case ctx.Workload.Services[1].Name: // y
// Service should be container ip:port
if v.Address != ctx.Workload.DriverNetwork.IP {
t.Errorf("expected service %s's address to be %s but found %s",
v.Name, ctx.Workload.DriverNetwork.IP, v.Address)
}
if v.Port != ctx.Workload.DriverNetwork.PortMap["y"] {
t.Errorf("expected service %s's port to be %d but found %d",
v.Name, ctx.Workload.DriverNetwork.PortMap["x"], v.Port)
}
// Check should be host ip:port
if v.Checks[0].TCP != ":1235" { // yPort
t.Errorf("expected service %s check's port to be %d but found %s",
v.Name, yPort, v.Checks[0].TCP)
}
case ctx.Workload.Services[2].Name: // y + host mode
if v.Port != yPort {
2017-06-26 19:53:43 +00:00
t.Errorf("expected service %s's port to be %d but found %d",
v.Name, yPort, v.Port)
}
default:
t.Errorf("unexpected service name: %q", v.Name)
}
}
}
// TestConsul_DriverNetwork_NoAutoUse asserts that if a driver network doesn't
// set auto-use only services which request the driver's network should
// advertise it.
func TestConsul_DriverNetwork_NoAutoUse(t *testing.T) {
t.Parallel()
ctx := setupFake(t)
ctx.Workload.Services = []*structs.Service{
{
Name: "auto-advertise-x",
PortLabel: "x",
AddressMode: structs.AddressModeAuto,
},
{
Name: "driver-advertise-y",
PortLabel: "y",
AddressMode: structs.AddressModeDriver,
},
{
Name: "host-advertise-y",
PortLabel: "y",
AddressMode: structs.AddressModeHost,
},
}
ctx.Workload.DriverNetwork = &drivers.DriverNetwork{
PortMap: map[string]int{
"x": 8888,
"y": 9999,
},
IP: "172.18.0.2",
AutoAdvertise: false,
}
if err := ctx.ServiceClient.RegisterWorkload(ctx.Workload); err != nil {
t.Fatalf("unexpected error registering task: %v", err)
}
client: enable configuring enable_tag_override for services Consul provides a feature of Service Definitions where the tags associated with a service can be modified through the Catalog API, overriding the value(s) configured in the agent's service configuration. To enable this feature, the flag enable_tag_override must be configured in the service definition. Previously, Nomad did not allow configuring this flag, and thus the default value of false was used. Now, it is configurable. Because Nomad itself acts as a state machine around the the service definitions of the tasks it manages, it's worth describing what happens when this feature is enabled and why. Consider the basic case where there is no Nomad, and your service is provided to consul as a boring JSON file. The ultimate source of truth for the definition of that service is the file, and is stored in the agent. Later, Consul performs "anti-entropy" which synchronizes the Catalog (stored only the leaders). Then with enable_tag_override=true, the tags field is available for "external" modification through the Catalog API (rather than directly configuring the service definition file, or using the Agent API). The important observation is that if the service definition ever changes (i.e. the file is changed & config reloaded OR the Agent API is used to modify the service), those "external" tag values are thrown away, and the new service definition is once again the source of truth. In the Nomad case, Nomad itself is the source of truth over the Agent in the same way the JSON file was the source of truth in the example above. That means any time Nomad sets a new service definition, any externally configured tags are going to be replaced. When does this happen? Only on major lifecycle events, for example when a task is modified because of an updated job spec from the 'nomad job run <existing>' command. Otherwise, Nomad's periodic re-sync's with Consul will now no longer try to restore the externally modified tag values (as long as enable_tag_override=true). Fixes #2057
2020-02-07 21:22:19 +00:00
if err := ctx.syncOnce(syncNewOps); err != nil {
t.Fatalf("unexpected error syncing task: %v", err)
}
if n := len(ctx.FakeConsul.services); n != 3 {
t.Fatalf("expected 3 services but found: %d", n)
}
for _, v := range ctx.FakeConsul.services {
switch v.Name {
case ctx.Workload.Services[0].Name: // x + auto
// Since DriverNetwork.AutoAdvertise=false, host ports should be used
if v.Port != xPort {
t.Errorf("expected service %s's port to be %d but found %d",
v.Name, xPort, v.Port)
}
case ctx.Workload.Services[1].Name: // y + driver mode
// Service should be container ip:port
if v.Address != ctx.Workload.DriverNetwork.IP {
t.Errorf("expected service %s's address to be %s but found %s",
v.Name, ctx.Workload.DriverNetwork.IP, v.Address)
}
if v.Port != ctx.Workload.DriverNetwork.PortMap["y"] {
t.Errorf("expected service %s's port to be %d but found %d",
v.Name, ctx.Workload.DriverNetwork.PortMap["x"], v.Port)
}
case ctx.Workload.Services[2].Name: // y + host mode
if v.Port != yPort {
2017-06-26 19:53:43 +00:00
t.Errorf("expected service %s's port to be %d but found %d",
v.Name, yPort, v.Port)
}
default:
t.Errorf("unexpected service name: %q", v.Name)
}
}
}
// TestConsul_DriverNetwork_Change asserts that if a driver network is
// specified and a service updates its use its properly updated in Consul.
func TestConsul_DriverNetwork_Change(t *testing.T) {
t.Parallel()
ctx := setupFake(t)
ctx.Workload.Services = []*structs.Service{
{
Name: "service-foo",
PortLabel: "x",
AddressMode: structs.AddressModeAuto,
},
}
ctx.Workload.DriverNetwork = &drivers.DriverNetwork{
PortMap: map[string]int{
"x": 8888,
"y": 9999,
},
IP: "172.18.0.2",
AutoAdvertise: false,
}
syncAndAssertPort := func(port int) {
client: enable configuring enable_tag_override for services Consul provides a feature of Service Definitions where the tags associated with a service can be modified through the Catalog API, overriding the value(s) configured in the agent's service configuration. To enable this feature, the flag enable_tag_override must be configured in the service definition. Previously, Nomad did not allow configuring this flag, and thus the default value of false was used. Now, it is configurable. Because Nomad itself acts as a state machine around the the service definitions of the tasks it manages, it's worth describing what happens when this feature is enabled and why. Consider the basic case where there is no Nomad, and your service is provided to consul as a boring JSON file. The ultimate source of truth for the definition of that service is the file, and is stored in the agent. Later, Consul performs "anti-entropy" which synchronizes the Catalog (stored only the leaders). Then with enable_tag_override=true, the tags field is available for "external" modification through the Catalog API (rather than directly configuring the service definition file, or using the Agent API). The important observation is that if the service definition ever changes (i.e. the file is changed & config reloaded OR the Agent API is used to modify the service), those "external" tag values are thrown away, and the new service definition is once again the source of truth. In the Nomad case, Nomad itself is the source of truth over the Agent in the same way the JSON file was the source of truth in the example above. That means any time Nomad sets a new service definition, any externally configured tags are going to be replaced. When does this happen? Only on major lifecycle events, for example when a task is modified because of an updated job spec from the 'nomad job run <existing>' command. Otherwise, Nomad's periodic re-sync's with Consul will now no longer try to restore the externally modified tag values (as long as enable_tag_override=true). Fixes #2057
2020-02-07 21:22:19 +00:00
if err := ctx.syncOnce(syncNewOps); err != nil {
t.Fatalf("unexpected error syncing task: %v", err)
}
if n := len(ctx.FakeConsul.services); n != 1 {
t.Fatalf("expected 1 service but found: %d", n)
}
for _, v := range ctx.FakeConsul.services {
switch v.Name {
case ctx.Workload.Services[0].Name:
if v.Port != port {
t.Errorf("expected service %s's port to be %d but found %d",
v.Name, port, v.Port)
}
default:
t.Errorf("unexpected service name: %q", v.Name)
}
}
}
// Initial service should advertise host port x
if err := ctx.ServiceClient.RegisterWorkload(ctx.Workload); err != nil {
t.Fatalf("unexpected error registering task: %v", err)
}
syncAndAssertPort(xPort)
// UpdateWorkload to use Host (shouldn't change anything)
origWorkload := ctx.Workload.Copy()
ctx.Workload.Services[0].AddressMode = structs.AddressModeHost
if err := ctx.ServiceClient.UpdateWorkload(origWorkload, ctx.Workload); err != nil {
t.Fatalf("unexpected error updating task: %v", err)
}
syncAndAssertPort(xPort)
// UpdateWorkload to use Driver (*should* change IP and port)
origWorkload = ctx.Workload.Copy()
ctx.Workload.Services[0].AddressMode = structs.AddressModeDriver
if err := ctx.ServiceClient.UpdateWorkload(origWorkload, ctx.Workload); err != nil {
t.Fatalf("unexpected error updating task: %v", err)
}
syncAndAssertPort(ctx.Workload.DriverNetwork.PortMap["x"])
}
// TestConsul_CanaryTags asserts CanaryTags are used when Canary=true
func TestConsul_CanaryTags(t *testing.T) {
t.Parallel()
require := require.New(t)
ctx := setupFake(t)
canaryTags := []string{"tag1", "canary"}
ctx.Workload.Canary = true
ctx.Workload.Services[0].CanaryTags = canaryTags
require.NoError(ctx.ServiceClient.RegisterWorkload(ctx.Workload))
client: enable configuring enable_tag_override for services Consul provides a feature of Service Definitions where the tags associated with a service can be modified through the Catalog API, overriding the value(s) configured in the agent's service configuration. To enable this feature, the flag enable_tag_override must be configured in the service definition. Previously, Nomad did not allow configuring this flag, and thus the default value of false was used. Now, it is configurable. Because Nomad itself acts as a state machine around the the service definitions of the tasks it manages, it's worth describing what happens when this feature is enabled and why. Consider the basic case where there is no Nomad, and your service is provided to consul as a boring JSON file. The ultimate source of truth for the definition of that service is the file, and is stored in the agent. Later, Consul performs "anti-entropy" which synchronizes the Catalog (stored only the leaders). Then with enable_tag_override=true, the tags field is available for "external" modification through the Catalog API (rather than directly configuring the service definition file, or using the Agent API). The important observation is that if the service definition ever changes (i.e. the file is changed & config reloaded OR the Agent API is used to modify the service), those "external" tag values are thrown away, and the new service definition is once again the source of truth. In the Nomad case, Nomad itself is the source of truth over the Agent in the same way the JSON file was the source of truth in the example above. That means any time Nomad sets a new service definition, any externally configured tags are going to be replaced. When does this happen? Only on major lifecycle events, for example when a task is modified because of an updated job spec from the 'nomad job run <existing>' command. Otherwise, Nomad's periodic re-sync's with Consul will now no longer try to restore the externally modified tag values (as long as enable_tag_override=true). Fixes #2057
2020-02-07 21:22:19 +00:00
require.NoError(ctx.syncOnce(syncNewOps))
require.Len(ctx.FakeConsul.services, 1)
for _, service := range ctx.FakeConsul.services {
require.Equal(canaryTags, service.Tags)
}
// Disable canary and assert tags are not the canary tags
origWorkload := ctx.Workload.Copy()
ctx.Workload.Canary = false
require.NoError(ctx.ServiceClient.UpdateWorkload(origWorkload, ctx.Workload))
client: enable configuring enable_tag_override for services Consul provides a feature of Service Definitions where the tags associated with a service can be modified through the Catalog API, overriding the value(s) configured in the agent's service configuration. To enable this feature, the flag enable_tag_override must be configured in the service definition. Previously, Nomad did not allow configuring this flag, and thus the default value of false was used. Now, it is configurable. Because Nomad itself acts as a state machine around the the service definitions of the tasks it manages, it's worth describing what happens when this feature is enabled and why. Consider the basic case where there is no Nomad, and your service is provided to consul as a boring JSON file. The ultimate source of truth for the definition of that service is the file, and is stored in the agent. Later, Consul performs "anti-entropy" which synchronizes the Catalog (stored only the leaders). Then with enable_tag_override=true, the tags field is available for "external" modification through the Catalog API (rather than directly configuring the service definition file, or using the Agent API). The important observation is that if the service definition ever changes (i.e. the file is changed & config reloaded OR the Agent API is used to modify the service), those "external" tag values are thrown away, and the new service definition is once again the source of truth. In the Nomad case, Nomad itself is the source of truth over the Agent in the same way the JSON file was the source of truth in the example above. That means any time Nomad sets a new service definition, any externally configured tags are going to be replaced. When does this happen? Only on major lifecycle events, for example when a task is modified because of an updated job spec from the 'nomad job run <existing>' command. Otherwise, Nomad's periodic re-sync's with Consul will now no longer try to restore the externally modified tag values (as long as enable_tag_override=true). Fixes #2057
2020-02-07 21:22:19 +00:00
require.NoError(ctx.syncOnce(syncNewOps))
require.Len(ctx.FakeConsul.services, 1)
for _, service := range ctx.FakeConsul.services {
require.NotEqual(canaryTags, service.Tags)
}
ctx.ServiceClient.RemoveWorkload(ctx.Workload)
client: enable configuring enable_tag_override for services Consul provides a feature of Service Definitions where the tags associated with a service can be modified through the Catalog API, overriding the value(s) configured in the agent's service configuration. To enable this feature, the flag enable_tag_override must be configured in the service definition. Previously, Nomad did not allow configuring this flag, and thus the default value of false was used. Now, it is configurable. Because Nomad itself acts as a state machine around the the service definitions of the tasks it manages, it's worth describing what happens when this feature is enabled and why. Consider the basic case where there is no Nomad, and your service is provided to consul as a boring JSON file. The ultimate source of truth for the definition of that service is the file, and is stored in the agent. Later, Consul performs "anti-entropy" which synchronizes the Catalog (stored only the leaders). Then with enable_tag_override=true, the tags field is available for "external" modification through the Catalog API (rather than directly configuring the service definition file, or using the Agent API). The important observation is that if the service definition ever changes (i.e. the file is changed & config reloaded OR the Agent API is used to modify the service), those "external" tag values are thrown away, and the new service definition is once again the source of truth. In the Nomad case, Nomad itself is the source of truth over the Agent in the same way the JSON file was the source of truth in the example above. That means any time Nomad sets a new service definition, any externally configured tags are going to be replaced. When does this happen? Only on major lifecycle events, for example when a task is modified because of an updated job spec from the 'nomad job run <existing>' command. Otherwise, Nomad's periodic re-sync's with Consul will now no longer try to restore the externally modified tag values (as long as enable_tag_override=true). Fixes #2057
2020-02-07 21:22:19 +00:00
require.NoError(ctx.syncOnce(syncNewOps))
require.Len(ctx.FakeConsul.services, 0)
}
// TestConsul_CanaryTags_NoTags asserts Tags are used when Canary=true and there
// are no specified canary tags
func TestConsul_CanaryTags_NoTags(t *testing.T) {
t.Parallel()
require := require.New(t)
ctx := setupFake(t)
tags := []string{"tag1", "foo"}
ctx.Workload.Canary = true
ctx.Workload.Services[0].Tags = tags
require.NoError(ctx.ServiceClient.RegisterWorkload(ctx.Workload))
client: enable configuring enable_tag_override for services Consul provides a feature of Service Definitions where the tags associated with a service can be modified through the Catalog API, overriding the value(s) configured in the agent's service configuration. To enable this feature, the flag enable_tag_override must be configured in the service definition. Previously, Nomad did not allow configuring this flag, and thus the default value of false was used. Now, it is configurable. Because Nomad itself acts as a state machine around the the service definitions of the tasks it manages, it's worth describing what happens when this feature is enabled and why. Consider the basic case where there is no Nomad, and your service is provided to consul as a boring JSON file. The ultimate source of truth for the definition of that service is the file, and is stored in the agent. Later, Consul performs "anti-entropy" which synchronizes the Catalog (stored only the leaders). Then with enable_tag_override=true, the tags field is available for "external" modification through the Catalog API (rather than directly configuring the service definition file, or using the Agent API). The important observation is that if the service definition ever changes (i.e. the file is changed & config reloaded OR the Agent API is used to modify the service), those "external" tag values are thrown away, and the new service definition is once again the source of truth. In the Nomad case, Nomad itself is the source of truth over the Agent in the same way the JSON file was the source of truth in the example above. That means any time Nomad sets a new service definition, any externally configured tags are going to be replaced. When does this happen? Only on major lifecycle events, for example when a task is modified because of an updated job spec from the 'nomad job run <existing>' command. Otherwise, Nomad's periodic re-sync's with Consul will now no longer try to restore the externally modified tag values (as long as enable_tag_override=true). Fixes #2057
2020-02-07 21:22:19 +00:00
require.NoError(ctx.syncOnce(syncNewOps))
require.Len(ctx.FakeConsul.services, 1)
for _, service := range ctx.FakeConsul.services {
require.Equal(tags, service.Tags)
}
// Disable canary and assert tags dont change
origWorkload := ctx.Workload.Copy()
ctx.Workload.Canary = false
require.NoError(ctx.ServiceClient.UpdateWorkload(origWorkload, ctx.Workload))
client: enable configuring enable_tag_override for services Consul provides a feature of Service Definitions where the tags associated with a service can be modified through the Catalog API, overriding the value(s) configured in the agent's service configuration. To enable this feature, the flag enable_tag_override must be configured in the service definition. Previously, Nomad did not allow configuring this flag, and thus the default value of false was used. Now, it is configurable. Because Nomad itself acts as a state machine around the the service definitions of the tasks it manages, it's worth describing what happens when this feature is enabled and why. Consider the basic case where there is no Nomad, and your service is provided to consul as a boring JSON file. The ultimate source of truth for the definition of that service is the file, and is stored in the agent. Later, Consul performs "anti-entropy" which synchronizes the Catalog (stored only the leaders). Then with enable_tag_override=true, the tags field is available for "external" modification through the Catalog API (rather than directly configuring the service definition file, or using the Agent API). The important observation is that if the service definition ever changes (i.e. the file is changed & config reloaded OR the Agent API is used to modify the service), those "external" tag values are thrown away, and the new service definition is once again the source of truth. In the Nomad case, Nomad itself is the source of truth over the Agent in the same way the JSON file was the source of truth in the example above. That means any time Nomad sets a new service definition, any externally configured tags are going to be replaced. When does this happen? Only on major lifecycle events, for example when a task is modified because of an updated job spec from the 'nomad job run <existing>' command. Otherwise, Nomad's periodic re-sync's with Consul will now no longer try to restore the externally modified tag values (as long as enable_tag_override=true). Fixes #2057
2020-02-07 21:22:19 +00:00
require.NoError(ctx.syncOnce(syncNewOps))
require.Len(ctx.FakeConsul.services, 1)
for _, service := range ctx.FakeConsul.services {
require.Equal(tags, service.Tags)
}
ctx.ServiceClient.RemoveWorkload(ctx.Workload)
client: enable configuring enable_tag_override for services Consul provides a feature of Service Definitions where the tags associated with a service can be modified through the Catalog API, overriding the value(s) configured in the agent's service configuration. To enable this feature, the flag enable_tag_override must be configured in the service definition. Previously, Nomad did not allow configuring this flag, and thus the default value of false was used. Now, it is configurable. Because Nomad itself acts as a state machine around the the service definitions of the tasks it manages, it's worth describing what happens when this feature is enabled and why. Consider the basic case where there is no Nomad, and your service is provided to consul as a boring JSON file. The ultimate source of truth for the definition of that service is the file, and is stored in the agent. Later, Consul performs "anti-entropy" which synchronizes the Catalog (stored only the leaders). Then with enable_tag_override=true, the tags field is available for "external" modification through the Catalog API (rather than directly configuring the service definition file, or using the Agent API). The important observation is that if the service definition ever changes (i.e. the file is changed & config reloaded OR the Agent API is used to modify the service), those "external" tag values are thrown away, and the new service definition is once again the source of truth. In the Nomad case, Nomad itself is the source of truth over the Agent in the same way the JSON file was the source of truth in the example above. That means any time Nomad sets a new service definition, any externally configured tags are going to be replaced. When does this happen? Only on major lifecycle events, for example when a task is modified because of an updated job spec from the 'nomad job run <existing>' command. Otherwise, Nomad's periodic re-sync's with Consul will now no longer try to restore the externally modified tag values (as long as enable_tag_override=true). Fixes #2057
2020-02-07 21:22:19 +00:00
require.NoError(ctx.syncOnce(syncNewOps))
require.Len(ctx.FakeConsul.services, 0)
}
2019-11-13 03:27:54 +00:00
// TestConsul_CanaryMeta asserts CanaryMeta are used when Canary=true
func TestConsul_CanaryMeta(t *testing.T) {
t.Parallel()
require := require.New(t)
ctx := setupFake(t)
canaryMeta := map[string]string{"meta1": "canary"}
canaryMeta["external-source"] = "nomad"
2020-01-27 19:00:19 +00:00
ctx.Workload.Canary = true
ctx.Workload.Services[0].CanaryMeta = canaryMeta
2019-11-13 03:27:54 +00:00
2020-01-27 19:00:19 +00:00
require.NoError(ctx.ServiceClient.RegisterWorkload(ctx.Workload))
client: enable configuring enable_tag_override for services Consul provides a feature of Service Definitions where the tags associated with a service can be modified through the Catalog API, overriding the value(s) configured in the agent's service configuration. To enable this feature, the flag enable_tag_override must be configured in the service definition. Previously, Nomad did not allow configuring this flag, and thus the default value of false was used. Now, it is configurable. Because Nomad itself acts as a state machine around the the service definitions of the tasks it manages, it's worth describing what happens when this feature is enabled and why. Consider the basic case where there is no Nomad, and your service is provided to consul as a boring JSON file. The ultimate source of truth for the definition of that service is the file, and is stored in the agent. Later, Consul performs "anti-entropy" which synchronizes the Catalog (stored only the leaders). Then with enable_tag_override=true, the tags field is available for "external" modification through the Catalog API (rather than directly configuring the service definition file, or using the Agent API). The important observation is that if the service definition ever changes (i.e. the file is changed & config reloaded OR the Agent API is used to modify the service), those "external" tag values are thrown away, and the new service definition is once again the source of truth. In the Nomad case, Nomad itself is the source of truth over the Agent in the same way the JSON file was the source of truth in the example above. That means any time Nomad sets a new service definition, any externally configured tags are going to be replaced. When does this happen? Only on major lifecycle events, for example when a task is modified because of an updated job spec from the 'nomad job run <existing>' command. Otherwise, Nomad's periodic re-sync's with Consul will now no longer try to restore the externally modified tag values (as long as enable_tag_override=true). Fixes #2057
2020-02-07 21:22:19 +00:00
require.NoError(ctx.syncOnce(syncNewOps))
2019-11-13 03:27:54 +00:00
require.Len(ctx.FakeConsul.services, 1)
for _, service := range ctx.FakeConsul.services {
require.Equal(canaryMeta, service.Meta)
}
// Disable canary and assert meta are not the canary meta
2020-01-27 19:00:19 +00:00
origWorkload := ctx.Workload.Copy()
ctx.Workload.Canary = false
require.NoError(ctx.ServiceClient.UpdateWorkload(origWorkload, ctx.Workload))
client: enable configuring enable_tag_override for services Consul provides a feature of Service Definitions where the tags associated with a service can be modified through the Catalog API, overriding the value(s) configured in the agent's service configuration. To enable this feature, the flag enable_tag_override must be configured in the service definition. Previously, Nomad did not allow configuring this flag, and thus the default value of false was used. Now, it is configurable. Because Nomad itself acts as a state machine around the the service definitions of the tasks it manages, it's worth describing what happens when this feature is enabled and why. Consider the basic case where there is no Nomad, and your service is provided to consul as a boring JSON file. The ultimate source of truth for the definition of that service is the file, and is stored in the agent. Later, Consul performs "anti-entropy" which synchronizes the Catalog (stored only the leaders). Then with enable_tag_override=true, the tags field is available for "external" modification through the Catalog API (rather than directly configuring the service definition file, or using the Agent API). The important observation is that if the service definition ever changes (i.e. the file is changed & config reloaded OR the Agent API is used to modify the service), those "external" tag values are thrown away, and the new service definition is once again the source of truth. In the Nomad case, Nomad itself is the source of truth over the Agent in the same way the JSON file was the source of truth in the example above. That means any time Nomad sets a new service definition, any externally configured tags are going to be replaced. When does this happen? Only on major lifecycle events, for example when a task is modified because of an updated job spec from the 'nomad job run <existing>' command. Otherwise, Nomad's periodic re-sync's with Consul will now no longer try to restore the externally modified tag values (as long as enable_tag_override=true). Fixes #2057
2020-02-07 21:22:19 +00:00
require.NoError(ctx.syncOnce(syncNewOps))
2019-11-13 03:27:54 +00:00
require.Len(ctx.FakeConsul.services, 1)
for _, service := range ctx.FakeConsul.services {
require.NotEqual(canaryMeta, service.Meta)
}
2020-01-27 19:00:19 +00:00
ctx.ServiceClient.RemoveWorkload(ctx.Workload)
client: enable configuring enable_tag_override for services Consul provides a feature of Service Definitions where the tags associated with a service can be modified through the Catalog API, overriding the value(s) configured in the agent's service configuration. To enable this feature, the flag enable_tag_override must be configured in the service definition. Previously, Nomad did not allow configuring this flag, and thus the default value of false was used. Now, it is configurable. Because Nomad itself acts as a state machine around the the service definitions of the tasks it manages, it's worth describing what happens when this feature is enabled and why. Consider the basic case where there is no Nomad, and your service is provided to consul as a boring JSON file. The ultimate source of truth for the definition of that service is the file, and is stored in the agent. Later, Consul performs "anti-entropy" which synchronizes the Catalog (stored only the leaders). Then with enable_tag_override=true, the tags field is available for "external" modification through the Catalog API (rather than directly configuring the service definition file, or using the Agent API). The important observation is that if the service definition ever changes (i.e. the file is changed & config reloaded OR the Agent API is used to modify the service), those "external" tag values are thrown away, and the new service definition is once again the source of truth. In the Nomad case, Nomad itself is the source of truth over the Agent in the same way the JSON file was the source of truth in the example above. That means any time Nomad sets a new service definition, any externally configured tags are going to be replaced. When does this happen? Only on major lifecycle events, for example when a task is modified because of an updated job spec from the 'nomad job run <existing>' command. Otherwise, Nomad's periodic re-sync's with Consul will now no longer try to restore the externally modified tag values (as long as enable_tag_override=true). Fixes #2057
2020-02-07 21:22:19 +00:00
require.NoError(ctx.syncOnce(syncNewOps))
2019-11-13 03:27:54 +00:00
require.Len(ctx.FakeConsul.services, 0)
}
// TestConsul_CanaryMeta_NoMeta asserts Meta are used when Canary=true and there
// are no specified canary meta
func TestConsul_CanaryMeta_NoMeta(t *testing.T) {
t.Parallel()
require := require.New(t)
ctx := setupFake(t)
meta := map[string]string{"meta1": "foo"}
meta["external-source"] = "nomad"
2020-01-27 19:00:19 +00:00
ctx.Workload.Canary = true
ctx.Workload.Services[0].Meta = meta
2019-11-13 03:27:54 +00:00
2020-01-27 19:00:19 +00:00
require.NoError(ctx.ServiceClient.RegisterWorkload(ctx.Workload))
client: enable configuring enable_tag_override for services Consul provides a feature of Service Definitions where the tags associated with a service can be modified through the Catalog API, overriding the value(s) configured in the agent's service configuration. To enable this feature, the flag enable_tag_override must be configured in the service definition. Previously, Nomad did not allow configuring this flag, and thus the default value of false was used. Now, it is configurable. Because Nomad itself acts as a state machine around the the service definitions of the tasks it manages, it's worth describing what happens when this feature is enabled and why. Consider the basic case where there is no Nomad, and your service is provided to consul as a boring JSON file. The ultimate source of truth for the definition of that service is the file, and is stored in the agent. Later, Consul performs "anti-entropy" which synchronizes the Catalog (stored only the leaders). Then with enable_tag_override=true, the tags field is available for "external" modification through the Catalog API (rather than directly configuring the service definition file, or using the Agent API). The important observation is that if the service definition ever changes (i.e. the file is changed & config reloaded OR the Agent API is used to modify the service), those "external" tag values are thrown away, and the new service definition is once again the source of truth. In the Nomad case, Nomad itself is the source of truth over the Agent in the same way the JSON file was the source of truth in the example above. That means any time Nomad sets a new service definition, any externally configured tags are going to be replaced. When does this happen? Only on major lifecycle events, for example when a task is modified because of an updated job spec from the 'nomad job run <existing>' command. Otherwise, Nomad's periodic re-sync's with Consul will now no longer try to restore the externally modified tag values (as long as enable_tag_override=true). Fixes #2057
2020-02-07 21:22:19 +00:00
require.NoError(ctx.syncOnce(syncNewOps))
2019-11-13 03:27:54 +00:00
require.Len(ctx.FakeConsul.services, 1)
for _, service := range ctx.FakeConsul.services {
require.Equal(meta, service.Meta)
}
// Disable canary and assert meta dont change
2020-01-27 19:00:19 +00:00
origWorkload := ctx.Workload.Copy()
ctx.Workload.Canary = false
require.NoError(ctx.ServiceClient.UpdateWorkload(origWorkload, ctx.Workload))
client: enable configuring enable_tag_override for services Consul provides a feature of Service Definitions where the tags associated with a service can be modified through the Catalog API, overriding the value(s) configured in the agent's service configuration. To enable this feature, the flag enable_tag_override must be configured in the service definition. Previously, Nomad did not allow configuring this flag, and thus the default value of false was used. Now, it is configurable. Because Nomad itself acts as a state machine around the the service definitions of the tasks it manages, it's worth describing what happens when this feature is enabled and why. Consider the basic case where there is no Nomad, and your service is provided to consul as a boring JSON file. The ultimate source of truth for the definition of that service is the file, and is stored in the agent. Later, Consul performs "anti-entropy" which synchronizes the Catalog (stored only the leaders). Then with enable_tag_override=true, the tags field is available for "external" modification through the Catalog API (rather than directly configuring the service definition file, or using the Agent API). The important observation is that if the service definition ever changes (i.e. the file is changed & config reloaded OR the Agent API is used to modify the service), those "external" tag values are thrown away, and the new service definition is once again the source of truth. In the Nomad case, Nomad itself is the source of truth over the Agent in the same way the JSON file was the source of truth in the example above. That means any time Nomad sets a new service definition, any externally configured tags are going to be replaced. When does this happen? Only on major lifecycle events, for example when a task is modified because of an updated job spec from the 'nomad job run <existing>' command. Otherwise, Nomad's periodic re-sync's with Consul will now no longer try to restore the externally modified tag values (as long as enable_tag_override=true). Fixes #2057
2020-02-07 21:22:19 +00:00
require.NoError(ctx.syncOnce(syncNewOps))
2019-11-13 03:27:54 +00:00
require.Len(ctx.FakeConsul.services, 1)
for _, service := range ctx.FakeConsul.services {
require.Equal(meta, service.Meta)
}
2020-01-27 19:00:19 +00:00
ctx.ServiceClient.RemoveWorkload(ctx.Workload)
client: enable configuring enable_tag_override for services Consul provides a feature of Service Definitions where the tags associated with a service can be modified through the Catalog API, overriding the value(s) configured in the agent's service configuration. To enable this feature, the flag enable_tag_override must be configured in the service definition. Previously, Nomad did not allow configuring this flag, and thus the default value of false was used. Now, it is configurable. Because Nomad itself acts as a state machine around the the service definitions of the tasks it manages, it's worth describing what happens when this feature is enabled and why. Consider the basic case where there is no Nomad, and your service is provided to consul as a boring JSON file. The ultimate source of truth for the definition of that service is the file, and is stored in the agent. Later, Consul performs "anti-entropy" which synchronizes the Catalog (stored only the leaders). Then with enable_tag_override=true, the tags field is available for "external" modification through the Catalog API (rather than directly configuring the service definition file, or using the Agent API). The important observation is that if the service definition ever changes (i.e. the file is changed & config reloaded OR the Agent API is used to modify the service), those "external" tag values are thrown away, and the new service definition is once again the source of truth. In the Nomad case, Nomad itself is the source of truth over the Agent in the same way the JSON file was the source of truth in the example above. That means any time Nomad sets a new service definition, any externally configured tags are going to be replaced. When does this happen? Only on major lifecycle events, for example when a task is modified because of an updated job spec from the 'nomad job run <existing>' command. Otherwise, Nomad's periodic re-sync's with Consul will now no longer try to restore the externally modified tag values (as long as enable_tag_override=true). Fixes #2057
2020-02-07 21:22:19 +00:00
require.NoError(ctx.syncOnce(syncNewOps))
2019-11-13 03:27:54 +00:00
require.Len(ctx.FakeConsul.services, 0)
}
// TestConsul_PeriodicSync asserts that Nomad periodically reconciles with
// Consul.
func TestConsul_PeriodicSync(t *testing.T) {
t.Parallel()
ctx := setupFake(t)
defer ctx.ServiceClient.Shutdown()
// Lower periodic sync interval to speed up test
2020-03-29 21:34:20 +00:00
ctx.ServiceClient.periodicInterval = 1 * time.Millisecond
2020-03-29 21:34:20 +00:00
// Run for 20ms and assert hits >= 5 because each sync() calls multiple
// Consul APIs
go ctx.ServiceClient.Run()
select {
case <-ctx.ServiceClient.exitCh:
t.Fatalf("exited unexpectedly")
2020-03-29 21:34:20 +00:00
case <-time.After(20 * time.Millisecond):
}
minHits := 5
if hits := ctx.FakeConsul.getHits(); hits < minHits {
t.Fatalf("expected at least %d hits but found %d", minHits, hits)
}
}
// TestIsNomadService asserts the isNomadService helper returns true for Nomad
// task IDs and false for unknown IDs and Nomad agent IDs (see #2827).
func TestIsNomadService(t *testing.T) {
t.Parallel()
tests := []struct {
id string
result bool
}{
{"_nomad-client-nomad-client-http", false},
{"_nomad-server-nomad-serf", false},
// Pre-0.7.1 style IDs still match
{"_nomad-executor-abc", true},
{"_nomad-executor", true},
// Post-0.7.1 style IDs match
{"_nomad-task-FBBK265QN4TMT25ND4EP42TJVMYJ3HR4", true},
{"not-nomad", false},
{"_nomad", false},
}
for _, test := range tests {
t.Run(test.id, func(t *testing.T) {
actual := isNomadService(test.id)
if actual != test.result {
2017-07-19 17:00:57 +00:00
t.Errorf("%q should be %t but found %t", test.id, test.result, actual)
}
})
}
}
2017-08-16 18:27:30 +00:00
// TestCreateCheckReg_HTTP asserts Nomad ServiceCheck structs are properly
// converted to Consul API AgentCheckRegistrations for HTTP checks.
func TestCreateCheckReg_HTTP(t *testing.T) {
t.Parallel()
2017-08-16 18:27:30 +00:00
check := &structs.ServiceCheck{
Name: "name",
Type: "http",
Path: "/path",
PortLabel: "label",
Method: "POST",
Header: map[string][]string{
"Foo": {"bar"},
},
}
serviceID := "testService"
checkID := check.Hash(serviceID)
host := "localhost"
port := 41111
expected := &api.AgentCheckRegistration{
ID: checkID,
Name: "name",
ServiceID: serviceID,
2017-08-17 22:18:55 +00:00
AgentServiceCheck: api.AgentServiceCheck{
Timeout: "0s",
Interval: "0s",
HTTP: fmt.Sprintf("http://%s:%d/path", host, port),
Method: "POST",
Header: map[string][]string{
"Foo": {"bar"},
},
},
2017-08-16 18:27:30 +00:00
}
actual, err := createCheckReg(serviceID, checkID, check, host, port)
if err != nil {
t.Fatalf("err: %v", err)
}
if diff := pretty.Diff(actual, expected); len(diff) > 0 {
t.Fatalf("diff:\n%s\n", strings.Join(diff, "\n"))
}
}
// TestCreateCheckReg_GRPC asserts Nomad ServiceCheck structs are properly
// converted to Consul API AgentCheckRegistrations for GRPC checks.
func TestCreateCheckReg_GRPC(t *testing.T) {
t.Parallel()
check := &structs.ServiceCheck{
Name: "name",
Type: "grpc",
PortLabel: "label",
GRPCService: "foo.Bar",
GRPCUseTLS: true,
TLSSkipVerify: true,
Timeout: time.Second,
Interval: time.Minute,
}
serviceID := "testService"
checkID := check.Hash(serviceID)
expected := &api.AgentCheckRegistration{
ID: checkID,
Name: "name",
ServiceID: serviceID,
AgentServiceCheck: api.AgentServiceCheck{
Timeout: "1s",
Interval: "1m0s",
GRPC: "localhost:8080/foo.Bar",
GRPCUseTLS: true,
TLSSkipVerify: true,
},
}
actual, err := createCheckReg(serviceID, checkID, check, "localhost", 8080)
require.NoError(t, err)
require.Equal(t, expected, actual)
}
// TestGetAddress asserts Nomad uses the correct ip and port for services and
// checks depending on port labels, driver networks, and address mode.
func TestGetAddress(t *testing.T) {
const HostIP = "127.0.0.1"
cases := []struct {
Name string
// Parameters
Mode string
PortLabel string
Host map[string]int // will be converted to structs.Networks
Driver *drivers.DriverNetwork
// Results
ExpectedIP string
ExpectedPort int
ExpectedErr string
}{
// Valid Configurations
{
Name: "ExampleService",
Mode: structs.AddressModeAuto,
PortLabel: "db",
Host: map[string]int{"db": 12435},
Driver: &drivers.DriverNetwork{
PortMap: map[string]int{"db": 6379},
IP: "10.1.2.3",
},
ExpectedIP: HostIP,
ExpectedPort: 12435,
},
{
Name: "Host",
Mode: structs.AddressModeHost,
PortLabel: "db",
Host: map[string]int{"db": 12345},
Driver: &drivers.DriverNetwork{
PortMap: map[string]int{"db": 6379},
IP: "10.1.2.3",
},
ExpectedIP: HostIP,
ExpectedPort: 12345,
},
{
Name: "Driver",
Mode: structs.AddressModeDriver,
PortLabel: "db",
Host: map[string]int{"db": 12345},
Driver: &drivers.DriverNetwork{
PortMap: map[string]int{"db": 6379},
IP: "10.1.2.3",
},
ExpectedIP: "10.1.2.3",
ExpectedPort: 6379,
},
{
Name: "AutoDriver",
Mode: structs.AddressModeAuto,
PortLabel: "db",
Host: map[string]int{"db": 12345},
Driver: &drivers.DriverNetwork{
PortMap: map[string]int{"db": 6379},
IP: "10.1.2.3",
AutoAdvertise: true,
},
ExpectedIP: "10.1.2.3",
ExpectedPort: 6379,
},
{
Name: "DriverCustomPort",
Mode: structs.AddressModeDriver,
PortLabel: "7890",
Host: map[string]int{"db": 12345},
Driver: &drivers.DriverNetwork{
PortMap: map[string]int{"db": 6379},
IP: "10.1.2.3",
},
ExpectedIP: "10.1.2.3",
ExpectedPort: 7890,
},
// Invalid Configurations
{
Name: "DriverWithoutNetwork",
Mode: structs.AddressModeDriver,
PortLabel: "db",
Host: map[string]int{"db": 12345},
Driver: nil,
ExpectedErr: "no driver network exists",
},
{
Name: "DriverBadPort",
Mode: structs.AddressModeDriver,
PortLabel: "bad-port-label",
Host: map[string]int{"db": 12345},
Driver: &drivers.DriverNetwork{
PortMap: map[string]int{"db": 6379},
IP: "10.1.2.3",
},
ExpectedErr: "invalid port",
},
{
Name: "DriverZeroPort",
Mode: structs.AddressModeDriver,
PortLabel: "0",
Driver: &drivers.DriverNetwork{
IP: "10.1.2.3",
},
ExpectedErr: "invalid port",
},
{
Name: "HostBadPort",
Mode: structs.AddressModeHost,
PortLabel: "bad-port-label",
ExpectedErr: "invalid port",
},
{
Name: "InvalidMode",
Mode: "invalid-mode",
PortLabel: "80",
ExpectedErr: "invalid address mode",
},
{
Name: "NoPort_AutoMode",
2017-12-20 23:59:47 +00:00
Mode: structs.AddressModeAuto,
ExpectedIP: HostIP,
},
{
Name: "NoPort_HostMode",
Mode: structs.AddressModeHost,
ExpectedIP: HostIP,
},
{
Name: "NoPort_DriverMode",
Mode: structs.AddressModeDriver,
Driver: &drivers.DriverNetwork{
IP: "10.1.2.3",
},
ExpectedIP: "10.1.2.3",
},
}
for _, tc := range cases {
t.Run(tc.Name, func(t *testing.T) {
// convert host port map into a structs.Networks
networks := []*structs.NetworkResource{
{
IP: HostIP,
ReservedPorts: make([]structs.Port, len(tc.Host)),
},
}
i := 0
for label, port := range tc.Host {
networks[0].ReservedPorts[i].Label = label
networks[0].ReservedPorts[i].Value = port
i++
}
// Run getAddress
ip, port, err := getAddress(tc.Mode, tc.PortLabel, networks, tc.Driver)
// Assert the results
assert.Equal(t, tc.ExpectedIP, ip, "IP mismatch")
assert.Equal(t, tc.ExpectedPort, port, "Port mismatch")
if tc.ExpectedErr == "" {
assert.Nil(t, err)
} else {
if err == nil {
t.Fatalf("expected error containing %q but err=nil", tc.ExpectedErr)
} else {
assert.Contains(t, err.Error(), tc.ExpectedErr)
}
}
})
}
}
func TestConsul_ServiceName_Duplicates(t *testing.T) {
t.Parallel()
ctx := setupFake(t)
require := require.New(t)
ctx.Workload.Services = []*structs.Service{
{
Name: "best-service",
PortLabel: "x",
Tags: []string{
"foo",
},
Checks: []*structs.ServiceCheck{
{
Name: "check-a",
Type: "tcp",
Interval: time.Second,
Timeout: time.Second,
},
},
},
{
Name: "best-service",
PortLabel: "y",
Tags: []string{
"bar",
},
Checks: []*structs.ServiceCheck{
{
Name: "checky-mccheckface",
Type: "tcp",
Interval: time.Second,
Timeout: time.Second,
},
},
},
{
Name: "worst-service",
PortLabel: "y",
},
}
require.NoError(ctx.ServiceClient.RegisterWorkload(ctx.Workload))
client: enable configuring enable_tag_override for services Consul provides a feature of Service Definitions where the tags associated with a service can be modified through the Catalog API, overriding the value(s) configured in the agent's service configuration. To enable this feature, the flag enable_tag_override must be configured in the service definition. Previously, Nomad did not allow configuring this flag, and thus the default value of false was used. Now, it is configurable. Because Nomad itself acts as a state machine around the the service definitions of the tasks it manages, it's worth describing what happens when this feature is enabled and why. Consider the basic case where there is no Nomad, and your service is provided to consul as a boring JSON file. The ultimate source of truth for the definition of that service is the file, and is stored in the agent. Later, Consul performs "anti-entropy" which synchronizes the Catalog (stored only the leaders). Then with enable_tag_override=true, the tags field is available for "external" modification through the Catalog API (rather than directly configuring the service definition file, or using the Agent API). The important observation is that if the service definition ever changes (i.e. the file is changed & config reloaded OR the Agent API is used to modify the service), those "external" tag values are thrown away, and the new service definition is once again the source of truth. In the Nomad case, Nomad itself is the source of truth over the Agent in the same way the JSON file was the source of truth in the example above. That means any time Nomad sets a new service definition, any externally configured tags are going to be replaced. When does this happen? Only on major lifecycle events, for example when a task is modified because of an updated job spec from the 'nomad job run <existing>' command. Otherwise, Nomad's periodic re-sync's with Consul will now no longer try to restore the externally modified tag values (as long as enable_tag_override=true). Fixes #2057
2020-02-07 21:22:19 +00:00
require.NoError(ctx.syncOnce(syncNewOps))
require.Len(ctx.FakeConsul.services, 3)
for _, v := range ctx.FakeConsul.services {
if v.Name == ctx.Workload.Services[0].Name && v.Port == xPort {
require.ElementsMatch(v.Tags, ctx.Workload.Services[0].Tags)
require.Len(v.Checks, 1)
} else if v.Name == ctx.Workload.Services[1].Name && v.Port == yPort {
require.ElementsMatch(v.Tags, ctx.Workload.Services[1].Tags)
require.Len(v.Checks, 1)
} else if v.Name == ctx.Workload.Services[2].Name {
require.Len(v.Checks, 0)
}
}
}
// TestConsul_ServiceDeregistration_OutOfProbation asserts that during in steady
// state we remove any services we don't reconize locally
func TestConsul_ServiceDeregistration_OutProbation(t *testing.T) {
t.Parallel()
ctx := setupFake(t)
require := require.New(t)
ctx.ServiceClient.deregisterProbationExpiry = time.Now().Add(-1 * time.Hour)
remainingWorkload := testWorkload()
remainingWorkload.Services = []*structs.Service{
{
Name: "remaining-service",
PortLabel: "x",
Checks: []*structs.ServiceCheck{
{
Name: "check",
Type: "tcp",
Interval: time.Second,
Timeout: time.Second,
},
},
},
}
remainingWorkloadServiceID := MakeAllocServiceID(remainingWorkload.AllocID,
remainingWorkload.Name(), remainingWorkload.Services[0])
require.NoError(ctx.ServiceClient.RegisterWorkload(remainingWorkload))
client: enable configuring enable_tag_override for services Consul provides a feature of Service Definitions where the tags associated with a service can be modified through the Catalog API, overriding the value(s) configured in the agent's service configuration. To enable this feature, the flag enable_tag_override must be configured in the service definition. Previously, Nomad did not allow configuring this flag, and thus the default value of false was used. Now, it is configurable. Because Nomad itself acts as a state machine around the the service definitions of the tasks it manages, it's worth describing what happens when this feature is enabled and why. Consider the basic case where there is no Nomad, and your service is provided to consul as a boring JSON file. The ultimate source of truth for the definition of that service is the file, and is stored in the agent. Later, Consul performs "anti-entropy" which synchronizes the Catalog (stored only the leaders). Then with enable_tag_override=true, the tags field is available for "external" modification through the Catalog API (rather than directly configuring the service definition file, or using the Agent API). The important observation is that if the service definition ever changes (i.e. the file is changed & config reloaded OR the Agent API is used to modify the service), those "external" tag values are thrown away, and the new service definition is once again the source of truth. In the Nomad case, Nomad itself is the source of truth over the Agent in the same way the JSON file was the source of truth in the example above. That means any time Nomad sets a new service definition, any externally configured tags are going to be replaced. When does this happen? Only on major lifecycle events, for example when a task is modified because of an updated job spec from the 'nomad job run <existing>' command. Otherwise, Nomad's periodic re-sync's with Consul will now no longer try to restore the externally modified tag values (as long as enable_tag_override=true). Fixes #2057
2020-02-07 21:22:19 +00:00
require.NoError(ctx.syncOnce(syncNewOps))
require.Len(ctx.FakeConsul.services, 1)
require.Len(ctx.FakeConsul.checks, 1)
explicitlyRemovedWorkload := testWorkload()
explicitlyRemovedWorkload.Services = []*structs.Service{
{
Name: "explicitly-removed-service",
PortLabel: "y",
Checks: []*structs.ServiceCheck{
{
Name: "check",
Type: "tcp",
Interval: time.Second,
Timeout: time.Second,
},
},
},
}
explicitlyRemovedWorkloadServiceID := MakeAllocServiceID(explicitlyRemovedWorkload.AllocID,
explicitlyRemovedWorkload.Name(), explicitlyRemovedWorkload.Services[0])
require.NoError(ctx.ServiceClient.RegisterWorkload(explicitlyRemovedWorkload))
client: enable configuring enable_tag_override for services Consul provides a feature of Service Definitions where the tags associated with a service can be modified through the Catalog API, overriding the value(s) configured in the agent's service configuration. To enable this feature, the flag enable_tag_override must be configured in the service definition. Previously, Nomad did not allow configuring this flag, and thus the default value of false was used. Now, it is configurable. Because Nomad itself acts as a state machine around the the service definitions of the tasks it manages, it's worth describing what happens when this feature is enabled and why. Consider the basic case where there is no Nomad, and your service is provided to consul as a boring JSON file. The ultimate source of truth for the definition of that service is the file, and is stored in the agent. Later, Consul performs "anti-entropy" which synchronizes the Catalog (stored only the leaders). Then with enable_tag_override=true, the tags field is available for "external" modification through the Catalog API (rather than directly configuring the service definition file, or using the Agent API). The important observation is that if the service definition ever changes (i.e. the file is changed & config reloaded OR the Agent API is used to modify the service), those "external" tag values are thrown away, and the new service definition is once again the source of truth. In the Nomad case, Nomad itself is the source of truth over the Agent in the same way the JSON file was the source of truth in the example above. That means any time Nomad sets a new service definition, any externally configured tags are going to be replaced. When does this happen? Only on major lifecycle events, for example when a task is modified because of an updated job spec from the 'nomad job run <existing>' command. Otherwise, Nomad's periodic re-sync's with Consul will now no longer try to restore the externally modified tag values (as long as enable_tag_override=true). Fixes #2057
2020-02-07 21:22:19 +00:00
require.NoError(ctx.syncOnce(syncNewOps))
require.Len(ctx.FakeConsul.services, 2)
require.Len(ctx.FakeConsul.checks, 2)
// we register a task through nomad API then remove it out of band
outofbandWorkload := testWorkload()
outofbandWorkload.Services = []*structs.Service{
{
Name: "unknown-service",
PortLabel: "x",
Checks: []*structs.ServiceCheck{
{
Name: "check",
Type: "tcp",
Interval: time.Second,
Timeout: time.Second,
},
},
},
}
outofbandWorkloadServiceID := MakeAllocServiceID(outofbandWorkload.AllocID,
outofbandWorkload.Name(), outofbandWorkload.Services[0])
require.NoError(ctx.ServiceClient.RegisterWorkload(outofbandWorkload))
client: enable configuring enable_tag_override for services Consul provides a feature of Service Definitions where the tags associated with a service can be modified through the Catalog API, overriding the value(s) configured in the agent's service configuration. To enable this feature, the flag enable_tag_override must be configured in the service definition. Previously, Nomad did not allow configuring this flag, and thus the default value of false was used. Now, it is configurable. Because Nomad itself acts as a state machine around the the service definitions of the tasks it manages, it's worth describing what happens when this feature is enabled and why. Consider the basic case where there is no Nomad, and your service is provided to consul as a boring JSON file. The ultimate source of truth for the definition of that service is the file, and is stored in the agent. Later, Consul performs "anti-entropy" which synchronizes the Catalog (stored only the leaders). Then with enable_tag_override=true, the tags field is available for "external" modification through the Catalog API (rather than directly configuring the service definition file, or using the Agent API). The important observation is that if the service definition ever changes (i.e. the file is changed & config reloaded OR the Agent API is used to modify the service), those "external" tag values are thrown away, and the new service definition is once again the source of truth. In the Nomad case, Nomad itself is the source of truth over the Agent in the same way the JSON file was the source of truth in the example above. That means any time Nomad sets a new service definition, any externally configured tags are going to be replaced. When does this happen? Only on major lifecycle events, for example when a task is modified because of an updated job spec from the 'nomad job run <existing>' command. Otherwise, Nomad's periodic re-sync's with Consul will now no longer try to restore the externally modified tag values (as long as enable_tag_override=true). Fixes #2057
2020-02-07 21:22:19 +00:00
require.NoError(ctx.syncOnce(syncNewOps))
require.Len(ctx.FakeConsul.services, 3)
// remove outofbandWorkload from local services so it appears unknown to client
require.Len(ctx.ServiceClient.services, 3)
require.Len(ctx.ServiceClient.checks, 3)
delete(ctx.ServiceClient.services, outofbandWorkloadServiceID)
delete(ctx.ServiceClient.checks, MakeCheckID(outofbandWorkloadServiceID, outofbandWorkload.Services[0].Checks[0]))
require.Len(ctx.ServiceClient.services, 2)
require.Len(ctx.ServiceClient.checks, 2)
// Sync and ensure that explicitly removed service as well as outofbandWorkload were removed
ctx.ServiceClient.RemoveWorkload(explicitlyRemovedWorkload)
client: enable configuring enable_tag_override for services Consul provides a feature of Service Definitions where the tags associated with a service can be modified through the Catalog API, overriding the value(s) configured in the agent's service configuration. To enable this feature, the flag enable_tag_override must be configured in the service definition. Previously, Nomad did not allow configuring this flag, and thus the default value of false was used. Now, it is configurable. Because Nomad itself acts as a state machine around the the service definitions of the tasks it manages, it's worth describing what happens when this feature is enabled and why. Consider the basic case where there is no Nomad, and your service is provided to consul as a boring JSON file. The ultimate source of truth for the definition of that service is the file, and is stored in the agent. Later, Consul performs "anti-entropy" which synchronizes the Catalog (stored only the leaders). Then with enable_tag_override=true, the tags field is available for "external" modification through the Catalog API (rather than directly configuring the service definition file, or using the Agent API). The important observation is that if the service definition ever changes (i.e. the file is changed & config reloaded OR the Agent API is used to modify the service), those "external" tag values are thrown away, and the new service definition is once again the source of truth. In the Nomad case, Nomad itself is the source of truth over the Agent in the same way the JSON file was the source of truth in the example above. That means any time Nomad sets a new service definition, any externally configured tags are going to be replaced. When does this happen? Only on major lifecycle events, for example when a task is modified because of an updated job spec from the 'nomad job run <existing>' command. Otherwise, Nomad's periodic re-sync's with Consul will now no longer try to restore the externally modified tag values (as long as enable_tag_override=true). Fixes #2057
2020-02-07 21:22:19 +00:00
require.NoError(ctx.syncOnce(syncNewOps))
require.NoError(ctx.ServiceClient.sync(syncNewOps))
require.Len(ctx.FakeConsul.services, 1)
require.Len(ctx.FakeConsul.checks, 1)
require.Contains(ctx.FakeConsul.services, remainingWorkloadServiceID)
require.NotContains(ctx.FakeConsul.services, outofbandWorkloadServiceID)
require.NotContains(ctx.FakeConsul.services, explicitlyRemovedWorkloadServiceID)
require.Contains(ctx.FakeConsul.checks, MakeCheckID(remainingWorkloadServiceID, remainingWorkload.Services[0].Checks[0]))
require.NotContains(ctx.FakeConsul.checks, MakeCheckID(outofbandWorkloadServiceID, outofbandWorkload.Services[0].Checks[0]))
require.NotContains(ctx.FakeConsul.checks, MakeCheckID(explicitlyRemovedWorkloadServiceID, explicitlyRemovedWorkload.Services[0].Checks[0]))
}
// TestConsul_ServiceDeregistration_InProbation asserts that during initialization
// we only deregister services that were explicitly removed and leave unknown
// services untouched. This adds a grace period for restoring recovered tasks
// before deregistering them
func TestConsul_ServiceDeregistration_InProbation(t *testing.T) {
t.Parallel()
ctx := setupFake(t)
require := require.New(t)
ctx.ServiceClient.deregisterProbationExpiry = time.Now().Add(1 * time.Hour)
remainingWorkload := testWorkload()
remainingWorkload.Services = []*structs.Service{
{
Name: "remaining-service",
PortLabel: "x",
Checks: []*structs.ServiceCheck{
{
Name: "check",
Type: "tcp",
Interval: time.Second,
Timeout: time.Second,
},
},
},
}
remainingWorkloadServiceID := MakeAllocServiceID(remainingWorkload.AllocID,
remainingWorkload.Name(), remainingWorkload.Services[0])
require.NoError(ctx.ServiceClient.RegisterWorkload(remainingWorkload))
client: enable configuring enable_tag_override for services Consul provides a feature of Service Definitions where the tags associated with a service can be modified through the Catalog API, overriding the value(s) configured in the agent's service configuration. To enable this feature, the flag enable_tag_override must be configured in the service definition. Previously, Nomad did not allow configuring this flag, and thus the default value of false was used. Now, it is configurable. Because Nomad itself acts as a state machine around the the service definitions of the tasks it manages, it's worth describing what happens when this feature is enabled and why. Consider the basic case where there is no Nomad, and your service is provided to consul as a boring JSON file. The ultimate source of truth for the definition of that service is the file, and is stored in the agent. Later, Consul performs "anti-entropy" which synchronizes the Catalog (stored only the leaders). Then with enable_tag_override=true, the tags field is available for "external" modification through the Catalog API (rather than directly configuring the service definition file, or using the Agent API). The important observation is that if the service definition ever changes (i.e. the file is changed & config reloaded OR the Agent API is used to modify the service), those "external" tag values are thrown away, and the new service definition is once again the source of truth. In the Nomad case, Nomad itself is the source of truth over the Agent in the same way the JSON file was the source of truth in the example above. That means any time Nomad sets a new service definition, any externally configured tags are going to be replaced. When does this happen? Only on major lifecycle events, for example when a task is modified because of an updated job spec from the 'nomad job run <existing>' command. Otherwise, Nomad's periodic re-sync's with Consul will now no longer try to restore the externally modified tag values (as long as enable_tag_override=true). Fixes #2057
2020-02-07 21:22:19 +00:00
require.NoError(ctx.syncOnce(syncNewOps))
require.Len(ctx.FakeConsul.services, 1)
require.Len(ctx.FakeConsul.checks, 1)
explicitlyRemovedWorkload := testWorkload()
explicitlyRemovedWorkload.Services = []*structs.Service{
{
Name: "explicitly-removed-service",
PortLabel: "y",
Checks: []*structs.ServiceCheck{
{
Name: "check",
Type: "tcp",
Interval: time.Second,
Timeout: time.Second,
},
},
},
}
explicitlyRemovedWorkloadServiceID := MakeAllocServiceID(explicitlyRemovedWorkload.AllocID,
explicitlyRemovedWorkload.Name(), explicitlyRemovedWorkload.Services[0])
require.NoError(ctx.ServiceClient.RegisterWorkload(explicitlyRemovedWorkload))
client: enable configuring enable_tag_override for services Consul provides a feature of Service Definitions where the tags associated with a service can be modified through the Catalog API, overriding the value(s) configured in the agent's service configuration. To enable this feature, the flag enable_tag_override must be configured in the service definition. Previously, Nomad did not allow configuring this flag, and thus the default value of false was used. Now, it is configurable. Because Nomad itself acts as a state machine around the the service definitions of the tasks it manages, it's worth describing what happens when this feature is enabled and why. Consider the basic case where there is no Nomad, and your service is provided to consul as a boring JSON file. The ultimate source of truth for the definition of that service is the file, and is stored in the agent. Later, Consul performs "anti-entropy" which synchronizes the Catalog (stored only the leaders). Then with enable_tag_override=true, the tags field is available for "external" modification through the Catalog API (rather than directly configuring the service definition file, or using the Agent API). The important observation is that if the service definition ever changes (i.e. the file is changed & config reloaded OR the Agent API is used to modify the service), those "external" tag values are thrown away, and the new service definition is once again the source of truth. In the Nomad case, Nomad itself is the source of truth over the Agent in the same way the JSON file was the source of truth in the example above. That means any time Nomad sets a new service definition, any externally configured tags are going to be replaced. When does this happen? Only on major lifecycle events, for example when a task is modified because of an updated job spec from the 'nomad job run <existing>' command. Otherwise, Nomad's periodic re-sync's with Consul will now no longer try to restore the externally modified tag values (as long as enable_tag_override=true). Fixes #2057
2020-02-07 21:22:19 +00:00
require.NoError(ctx.syncOnce(syncNewOps))
require.Len(ctx.FakeConsul.services, 2)
require.Len(ctx.FakeConsul.checks, 2)
// we register a task through nomad API then remove it out of band
outofbandWorkload := testWorkload()
outofbandWorkload.Services = []*structs.Service{
{
Name: "unknown-service",
PortLabel: "x",
Checks: []*structs.ServiceCheck{
{
Name: "check",
Type: "tcp",
Interval: time.Second,
Timeout: time.Second,
},
},
},
}
outofbandWorkloadServiceID := MakeAllocServiceID(outofbandWorkload.AllocID,
outofbandWorkload.Name(), outofbandWorkload.Services[0])
require.NoError(ctx.ServiceClient.RegisterWorkload(outofbandWorkload))
client: enable configuring enable_tag_override for services Consul provides a feature of Service Definitions where the tags associated with a service can be modified through the Catalog API, overriding the value(s) configured in the agent's service configuration. To enable this feature, the flag enable_tag_override must be configured in the service definition. Previously, Nomad did not allow configuring this flag, and thus the default value of false was used. Now, it is configurable. Because Nomad itself acts as a state machine around the the service definitions of the tasks it manages, it's worth describing what happens when this feature is enabled and why. Consider the basic case where there is no Nomad, and your service is provided to consul as a boring JSON file. The ultimate source of truth for the definition of that service is the file, and is stored in the agent. Later, Consul performs "anti-entropy" which synchronizes the Catalog (stored only the leaders). Then with enable_tag_override=true, the tags field is available for "external" modification through the Catalog API (rather than directly configuring the service definition file, or using the Agent API). The important observation is that if the service definition ever changes (i.e. the file is changed & config reloaded OR the Agent API is used to modify the service), those "external" tag values are thrown away, and the new service definition is once again the source of truth. In the Nomad case, Nomad itself is the source of truth over the Agent in the same way the JSON file was the source of truth in the example above. That means any time Nomad sets a new service definition, any externally configured tags are going to be replaced. When does this happen? Only on major lifecycle events, for example when a task is modified because of an updated job spec from the 'nomad job run <existing>' command. Otherwise, Nomad's periodic re-sync's with Consul will now no longer try to restore the externally modified tag values (as long as enable_tag_override=true). Fixes #2057
2020-02-07 21:22:19 +00:00
require.NoError(ctx.syncOnce(syncNewOps))
require.Len(ctx.FakeConsul.services, 3)
// remove outofbandWorkload from local services so it appears unknown to client
require.Len(ctx.ServiceClient.services, 3)
require.Len(ctx.ServiceClient.checks, 3)
delete(ctx.ServiceClient.services, outofbandWorkloadServiceID)
delete(ctx.ServiceClient.checks, MakeCheckID(outofbandWorkloadServiceID, outofbandWorkload.Services[0].Checks[0]))
require.Len(ctx.ServiceClient.services, 2)
require.Len(ctx.ServiceClient.checks, 2)
// Sync and ensure that explicitly removed service was removed, but outofbandWorkload remains
ctx.ServiceClient.RemoveWorkload(explicitlyRemovedWorkload)
client: enable configuring enable_tag_override for services Consul provides a feature of Service Definitions where the tags associated with a service can be modified through the Catalog API, overriding the value(s) configured in the agent's service configuration. To enable this feature, the flag enable_tag_override must be configured in the service definition. Previously, Nomad did not allow configuring this flag, and thus the default value of false was used. Now, it is configurable. Because Nomad itself acts as a state machine around the the service definitions of the tasks it manages, it's worth describing what happens when this feature is enabled and why. Consider the basic case where there is no Nomad, and your service is provided to consul as a boring JSON file. The ultimate source of truth for the definition of that service is the file, and is stored in the agent. Later, Consul performs "anti-entropy" which synchronizes the Catalog (stored only the leaders). Then with enable_tag_override=true, the tags field is available for "external" modification through the Catalog API (rather than directly configuring the service definition file, or using the Agent API). The important observation is that if the service definition ever changes (i.e. the file is changed & config reloaded OR the Agent API is used to modify the service), those "external" tag values are thrown away, and the new service definition is once again the source of truth. In the Nomad case, Nomad itself is the source of truth over the Agent in the same way the JSON file was the source of truth in the example above. That means any time Nomad sets a new service definition, any externally configured tags are going to be replaced. When does this happen? Only on major lifecycle events, for example when a task is modified because of an updated job spec from the 'nomad job run <existing>' command. Otherwise, Nomad's periodic re-sync's with Consul will now no longer try to restore the externally modified tag values (as long as enable_tag_override=true). Fixes #2057
2020-02-07 21:22:19 +00:00
require.NoError(ctx.syncOnce(syncNewOps))
require.NoError(ctx.ServiceClient.sync(syncNewOps))
require.Len(ctx.FakeConsul.services, 2)
require.Len(ctx.FakeConsul.checks, 2)
require.Contains(ctx.FakeConsul.services, remainingWorkloadServiceID)
require.Contains(ctx.FakeConsul.services, outofbandWorkloadServiceID)
require.NotContains(ctx.FakeConsul.services, explicitlyRemovedWorkloadServiceID)
require.Contains(ctx.FakeConsul.checks, MakeCheckID(remainingWorkloadServiceID, remainingWorkload.Services[0].Checks[0]))
require.Contains(ctx.FakeConsul.checks, MakeCheckID(outofbandWorkloadServiceID, outofbandWorkload.Services[0].Checks[0]))
require.NotContains(ctx.FakeConsul.checks, MakeCheckID(explicitlyRemovedWorkloadServiceID, explicitlyRemovedWorkload.Services[0].Checks[0]))
// after probation, outofband services and checks are removed
ctx.ServiceClient.deregisterProbationExpiry = time.Now().Add(-1 * time.Hour)
client: enable configuring enable_tag_override for services Consul provides a feature of Service Definitions where the tags associated with a service can be modified through the Catalog API, overriding the value(s) configured in the agent's service configuration. To enable this feature, the flag enable_tag_override must be configured in the service definition. Previously, Nomad did not allow configuring this flag, and thus the default value of false was used. Now, it is configurable. Because Nomad itself acts as a state machine around the the service definitions of the tasks it manages, it's worth describing what happens when this feature is enabled and why. Consider the basic case where there is no Nomad, and your service is provided to consul as a boring JSON file. The ultimate source of truth for the definition of that service is the file, and is stored in the agent. Later, Consul performs "anti-entropy" which synchronizes the Catalog (stored only the leaders). Then with enable_tag_override=true, the tags field is available for "external" modification through the Catalog API (rather than directly configuring the service definition file, or using the Agent API). The important observation is that if the service definition ever changes (i.e. the file is changed & config reloaded OR the Agent API is used to modify the service), those "external" tag values are thrown away, and the new service definition is once again the source of truth. In the Nomad case, Nomad itself is the source of truth over the Agent in the same way the JSON file was the source of truth in the example above. That means any time Nomad sets a new service definition, any externally configured tags are going to be replaced. When does this happen? Only on major lifecycle events, for example when a task is modified because of an updated job spec from the 'nomad job run <existing>' command. Otherwise, Nomad's periodic re-sync's with Consul will now no longer try to restore the externally modified tag values (as long as enable_tag_override=true). Fixes #2057
2020-02-07 21:22:19 +00:00
require.NoError(ctx.ServiceClient.sync(syncNewOps))
require.Len(ctx.FakeConsul.services, 1)
require.Len(ctx.FakeConsul.checks, 1)
require.Contains(ctx.FakeConsul.services, remainingWorkloadServiceID)
require.NotContains(ctx.FakeConsul.services, outofbandWorkloadServiceID)
require.NotContains(ctx.FakeConsul.services, explicitlyRemovedWorkloadServiceID)
require.Contains(ctx.FakeConsul.checks, MakeCheckID(remainingWorkloadServiceID, remainingWorkload.Services[0].Checks[0]))
require.NotContains(ctx.FakeConsul.checks, MakeCheckID(outofbandWorkloadServiceID, outofbandWorkload.Services[0].Checks[0]))
require.NotContains(ctx.FakeConsul.checks, MakeCheckID(explicitlyRemovedWorkloadServiceID, explicitlyRemovedWorkload.Services[0].Checks[0]))
}