open-consul/agent/config/runtime.go

1852 lines
63 KiB
Go

package config
import (
"fmt"
"net"
"reflect"
"strings"
"time"
"github.com/hashicorp/go-uuid"
"golang.org/x/time/rate"
"github.com/hashicorp/consul/agent/cache"
"github.com/hashicorp/consul/agent/consul"
"github.com/hashicorp/consul/agent/dns"
"github.com/hashicorp/consul/agent/structs"
"github.com/hashicorp/consul/agent/token"
"github.com/hashicorp/consul/api"
"github.com/hashicorp/consul/lib"
"github.com/hashicorp/consul/logging"
"github.com/hashicorp/consul/tlsutil"
"github.com/hashicorp/consul/types"
)
type RuntimeSOAConfig struct {
Refresh uint32 // 3600 by default
Retry uint32 // 600
Expire uint32 // 86400
Minttl uint32 // 0,
}
// StaticRuntimeConfig specifies the subset of configuration the consul agent actually
// uses and that are not reloadable by configuration auto reload.
type StaticRuntimeConfig struct {
// EncryptVerifyIncoming enforces incoming gossip encryption and can be
// used to upshift to encrypted gossip on a running cluster.
//
// hcl: encrypt_verify_incoming = (true|false)
EncryptVerifyIncoming bool
// EncryptVerifyOutgoing enforces outgoing gossip encryption and can be
// used to upshift to encrypted gossip on a running cluster.
//
// hcl: encrypt_verify_outgoing = (true|false)
EncryptVerifyOutgoing bool
}
// RuntimeConfig specifies the configuration the consul agent actually
// uses. Is is derived from one or more Config structures which can come
// from files, flags and/or environment variables.
type RuntimeConfig struct {
// non-user configurable values
AEInterval time.Duration
CheckDeregisterIntervalMin time.Duration
CheckReapInterval time.Duration
SegmentLimit int
SegmentNameLimit int
SyncCoordinateRateTarget float64
SyncCoordinateIntervalMin time.Duration
Revision string
Version string
VersionPrerelease string
VersionMetadata string
BuildDate time.Time
// consul config
ConsulCoordinateUpdateMaxBatches int
ConsulCoordinateUpdateBatchSize int
ConsulCoordinateUpdatePeriod time.Duration
ConsulRaftElectionTimeout time.Duration
ConsulRaftHeartbeatTimeout time.Duration
ConsulRaftLeaderLeaseTimeout time.Duration
ConsulServerHealthInterval time.Duration
// ACLsEnabled is used to determine whether ACLs should be enabled
//
// hcl: acl.enabled = boolean
ACLsEnabled bool
ACLTokens token.Config
ACLResolverSettings consul.ACLResolverSettings
// ACLEnableKeyListPolicy is used to opt-in to the "list" policy added to
// KV ACLs in Consul 1.0.
//
// See https://www.consul.io/docs/guides/acl.html#list-policy-for-keys for
// more details.
//
// hcl: acl.enable_key_list_policy = (true|false)
ACLEnableKeyListPolicy bool
// ACLInitialManagementToken is used to bootstrap the ACL system. It should be specified
// on the servers in the PrimaryDatacenter. When the leader comes online, it ensures
// that the initial management token is available. This provides the initial token.
//
// hcl: acl.tokens.initial_management = string
ACLInitialManagementToken string
// ACLtokenReplication is used to indicate that both tokens and policies
// should be replicated instead of just policies
//
// hcl: acl.token_replication = boolean
ACLTokenReplication bool
// AutopilotCleanupDeadServers enables the automatic cleanup of dead servers when new ones
// are added to the peer list. Defaults to true.
//
// hcl: autopilot { cleanup_dead_servers = (true|false) }
AutopilotCleanupDeadServers bool
// AutopilotDisableUpgradeMigration will disable Autopilot's upgrade migration
// strategy of waiting until enough newer-versioned servers have been added to the
// cluster before promoting them to voters. (Enterprise-only)
//
// hcl: autopilot { disable_upgrade_migration = (true|false)
AutopilotDisableUpgradeMigration bool
// AutopilotLastContactThreshold is the limit on the amount of time a server can go
// without leader contact before being considered unhealthy.
//
// hcl: autopilot { last_contact_threshold = "duration" }
AutopilotLastContactThreshold time.Duration
// AutopilotMaxTrailingLogs is the amount of entries in the Raft Log that a server can
// be behind before being considered unhealthy. The value must be positive.
//
// hcl: autopilot { max_trailing_logs = int }
AutopilotMaxTrailingLogs int
// AutopilotMinQuorum sets the minimum number of servers required in a cluster
// before autopilot can prune dead servers.
//
//hcl: autopilot { min_quorum = int }
AutopilotMinQuorum uint
// AutopilotRedundancyZoneTag is the Meta tag to use for separating servers
// into zones for redundancy. If left blank, this feature will be disabled.
// (Enterprise-only)
//
// hcl: autopilot { redundancy_zone_tag = string }
AutopilotRedundancyZoneTag string
// AutopilotServerStabilizationTime is the minimum amount of time a server must be
// in a stable, healthy state before it can be added to the cluster. Only
// applicable with Raft protocol version 3 or higher.
//
// hcl: autopilot { server_stabilization_time = "duration" }
AutopilotServerStabilizationTime time.Duration
// AutopilotUpgradeVersionTag is the node tag to use for version info when
// performing upgrade migrations. If left blank, the Consul version will be used.
//
// (Enterprise-only)
//
// hcl: autopilot { upgrade_version_tag = string }
AutopilotUpgradeVersionTag string
// DNSAllowStale is used to enable lookups with stale
// data. This gives horizontal read scalability since
// any Consul server can service the query instead of
// only the leader.
//
// hcl: dns_config { allow_stale = (true|false) }
DNSAllowStale bool
// DNSARecordLimit is used to limit the maximum number of DNS Resource
// Records returned in the ANSWER section of a DNS response for A or AAAA
// records for both UDP and TCP queries.
//
// This is not normally useful and will be limited based on the querying
// protocol, however systems that implemented §6 Rule 9 in RFC3484
// may want to set this to `1` in order to subvert §6 Rule 9 and
// re-obtain the effect of randomized resource records (i.e. each
// answer contains only one IP, but the IP changes every request).
// RFC3484 sorts answers in a deterministic order, which defeats the
// purpose of randomized DNS responses. This RFC has been obsoleted
// by RFC6724 and restores the desired behavior of randomized
// responses, however a large number of Linux hosts using glibc(3)
// implemented §6 Rule 9 and may need this option (e.g. CentOS 5-6,
// Debian Squeeze, etc).
//
// hcl: dns_config { a_record_limit = int }
DNSARecordLimit int
// DNSDisableCompression is used to control whether DNS responses are
// compressed. In Consul 0.7 this was turned on by default and this
// config was added as an opt-out.
//
// hcl: dns_config { disable_compression = (true|false) }
DNSDisableCompression bool
// DNSDomain is the DNS domain for the records. Should end with a dot.
// Defaults to "consul."
//
// hcl: domain = string
// flag: -domain string
DNSDomain string
// DNSAltDomain can be set to support resolution on an additional
// consul domain. Should end with a dot.
// If left blank, only the primary domain will be used.
//
// hcl: alt_domain = string
// flag: -alt-domain string
DNSAltDomain string
// DNSEnableTruncate is used to enable setting the truncate
// flag for UDP DNS queries. This allows unmodified
// clients to re-query the consul server using TCP
// when the total number of records exceeds the number
// returned by default for UDP.
//
// hcl: dns_config { enable_truncate = (true|false) }
DNSEnableTruncate bool
// DNSMaxStale is used to bound how stale of a result is
// accepted for a DNS lookup. This can be used with
// AllowStale to limit how old of a value is served up.
// If the stale result exceeds this, another non-stale
// stale read is performed.
//
// hcl: dns_config { max_stale = "duration" }
DNSMaxStale time.Duration
// DNSNodeTTL provides the TTL value for a node query.
//
// hcl: dns_config { node_ttl = "duration" }
DNSNodeTTL time.Duration
// DNSOnlyPassing is used to determine whether to filter nodes
// whose health checks are in any non-passing state. By
// default, only nodes in a critical state are excluded.
//
// hcl: dns_config { only_passing = (true|false) }
DNSOnlyPassing bool
// DNSRecursorStrategy controls the order in which DNS recursors are queried.
// 'sequential' queries recursors in the order they are listed under `recursors`.
// 'random' causes random selection of recursors which has the effect of
// spreading the query load among all listed servers, rather than having
// client agents try the first server in the list every time.
//
// hcl: dns_config { recursor_strategy = "(random|sequential)" }
DNSRecursorStrategy dns.RecursorStrategy
// DNSRecursorTimeout specifies the timeout in seconds
// for Consul's internal dns client used for recursion.
// This value is used for the connection, read and write timeout.
//
// hcl: dns_config { recursor_timeout = "duration" }
DNSRecursorTimeout time.Duration
// DNSServiceTTL provides the TTL value for a service
// query for given service. The "*" wildcard can be used
// to set a default for all services.
//
// hcl: dns_config { service_ttl = map[string]"duration" }
DNSServiceTTL map[string]time.Duration
// DNSUDPAnswerLimit is used to limit the maximum number of DNS Resource
// Records returned in the ANSWER section of a DNS response for UDP
// responses without EDNS support (limited to 512 bytes).
// This parameter is deprecated, if you want to limit the number of
// records returned by A or AAAA questions, please use DNSARecordLimit
// instead.
//
// hcl: dns_config { udp_answer_limit = int }
DNSUDPAnswerLimit int
// DNSNodeMetaTXT controls whether DNS queries will synthesize
// TXT records for the node metadata and add them when not specifically
// request (query type = TXT). If unset this will default to true
DNSNodeMetaTXT bool
// DNSRecursors can be set to allow the DNS servers to recursively
// resolve non-consul domains.
//
// hcl: recursors = []string
// flag: -recursor string [-recursor string]
DNSRecursors []string
// DNSUseCache whether or not to use cache for dns queries
//
// hcl: dns_config { use_cache = (true|false) }
DNSUseCache bool
// DNSUseCache whether or not to use cache for dns queries
//
// hcl: dns_config { cache_max_age = "duration" }
DNSCacheMaxAge time.Duration
// HTTPUseCache whether or not to use cache for http queries. Defaults
// to true.
//
// hcl: http_config { use_cache = (true|false) }
HTTPUseCache bool
// HTTPBlockEndpoints is a list of endpoint prefixes to block in the
// HTTP API. Any requests to these will get a 403 response.
//
// hcl: http_config { block_endpoints = []string }
HTTPBlockEndpoints []string
// AllowWriteHTTPFrom restricts the agent write endpoints to the given
// networks. Any request to a protected endpoint that is not mactched
// by one of these networks will get a 403 response.
// An empty slice means no restriction.
//
// hcl: http_config { allow_write_http_from = []string }
AllowWriteHTTPFrom []*net.IPNet
// HTTPResponseHeaders are used to add HTTP header response fields to the HTTP API responses.
//
// hcl: http_config { response_headers = map[string]string }
HTTPResponseHeaders map[string]string
// Embed Telemetry Config
Telemetry lib.TelemetryConfig
// Datacenter is the datacenter this node is in. Defaults to "dc1".
//
// Datacenter is exposed via /v1/agent/self from here and
// used in lots of places like CLI commands. Treat this as an interface
// that must be stable.
//
// hcl: datacenter = string
// flag: -datacenter string
Datacenter string
// Defines the maximum stale value for discovery path. Defaults to "0s".
// Discovery paths are /v1/heath/ paths
//
// If not set to 0, it will try to perform stale read and perform only a
// consistent read whenever the value is too old.
// hcl: discovery_max_stale = "duration"
DiscoveryMaxStale time.Duration
// Node name is the name we use to advertise. Defaults to hostname.
//
// NodeName is exposed via /v1/agent/self from here and
// used in lots of places like CLI commands. Treat this as an interface
// that must be stable.
//
// hcl: node_name = string
// flag: -node string
NodeName string
// AdvertiseAddrLAN is the address we use for advertising our Serf, and
// Consul RPC IP. The address can be specified as an ip address or as a
// go-sockaddr template which resolves to a single ip address. If not
// specified, the bind address is used.
//
// hcl: advertise_addr = string
AdvertiseAddrLAN *net.IPAddr
// AdvertiseAddrWAN is the address we use for advertising our Serf, and
// Consul RPC IP. The address can be specified as an ip address or as a
// go-sockaddr template which resolves to a single ip address. If not
// specified, the bind address is used.
//
// hcl: advertise_addr_wan = string
AdvertiseAddrWAN *net.IPAddr
// BindAddr is used to control the address we bind to.
// If not specified, the first private IP we find is used.
// This controls the address we use for cluster facing
// services (Gossip, Server RPC)
//
// The value can be either an ip address or a go-sockaddr
// template which resolves to a single ip address.
//
// hcl: bind_addr = string
// flag: -bind string
BindAddr *net.IPAddr
// Bootstrap is used to bring up the first Consul server, and
// permits that node to elect itself leader
//
// hcl: bootstrap = (true|false)
// flag: -bootstrap
Bootstrap bool
// BootstrapExpect tries to automatically bootstrap the Consul cluster, by
// having servers wait to bootstrap until enough servers join, and then
// performing the bootstrap process automatically. They will disable their
// automatic bootstrap process if they detect any servers that are part of
// an existing cluster, so it's safe to leave this set to a non-zero value.
//
// hcl: bootstrap_expect = int
// flag: -bootstrap-expect=int
BootstrapExpect int
// Cache represent cache configuration of agent
Cache cache.Options
// CheckUpdateInterval controls the interval on which the output of a health check
// is updated if there is no change to the state. For example, a check in a steady
// state may run every 5 second generating a unique output (timestamp, etc), forcing
// constant writes. This allows Consul to defer the write for some period of time,
// reducing the write pressure when the state is steady.
//
// See also: DiscardCheckOutput
//
// hcl: check_update_interval = "duration"
CheckUpdateInterval time.Duration
// Maximum size for the output of a healtcheck
// hcl check_output_max_size int
// flag: -check_output_max_size int
CheckOutputMaxSize int
// Checks contains the provided check definitions.
//
// hcl: checks = [
// {
// id = string
// name = string
// notes = string
// service_id = string
// token = string
// status = string
// script = string
// args = string
// http = string
// header = map[string][]string
// method = string
// disable_redirects = (true|false)
// tcp = string
// h2ping = string
// interval = string
// docker_container_id = string
// shell = string
// tls_skip_verify = (true|false)
// timeout = "duration"
// ttl = "duration"
// success_before_passing = int
// failures_before_warning = int
// failures_before_critical = int
// deregister_critical_service_after = "duration"
// },
// ...
// ]
Checks []*structs.CheckDefinition
// ClientAddrs contains the list of ip addresses the DNS, HTTP and HTTPS
// endpoints will bind to if the endpoints are enabled (ports > 0) and the
// addresses are not overwritten.
//
// The ip addresses must be provided as a space separated list of ip
// addresses and go-sockaddr templates.
//
// Client addresses cannot contain UNIX socket addresses since a socket
// cannot be shared across multiple endpoints (no ports). To use UNIX
// sockets configure it in 'addresses'.
//
// hcl: client_addr = string
// flag: -client string
ClientAddrs []*net.IPAddr
// ConfigEntryBootstrap contains a list of ConfigEntries to ensure are created
// If entries of the same Kind/Name exist already these will not update them.
ConfigEntryBootstrap []structs.ConfigEntry
// AutoEncryptTLS requires the client to acquire TLS certificates from
// servers.
AutoEncryptTLS bool
// Additional DNS SAN entries that clients request during auto_encrypt
// flow for their certificates.
AutoEncryptDNSSAN []string
// Additional IP SAN entries that clients request during auto_encrypt
// flow for their certificates.
AutoEncryptIPSAN []net.IP
// AutoEncryptAllowTLS enables the server to respond to
// AutoEncrypt.Sign requests.
AutoEncryptAllowTLS bool
// AutoConfig is a grouping of the configurations around the agent auto configuration
// process including how servers can authorize requests.
AutoConfig AutoConfig
// ConnectEnabled opts the agent into connect. It should be set on all clients
// and servers in a cluster for correct connect operation.
ConnectEnabled bool
// ConnectServerlessPluginEnabled opts the agent into the serverless plugin.
// This plugin allows services to be configured as AWS Lambdas. After the
// Lambda service is configured, Connect services can invoke the Lambda
// service like any other upstream.
ConnectServerlessPluginEnabled bool
// ConnectSidecarMinPort is the inclusive start of the range of ports
// allocated to the agent for asigning to sidecar services where no port is
// specified.
ConnectSidecarMinPort int
// ConnectSidecarMaxPort is the inclusive end of the range of ports
// allocated to the agent for asigning to sidecar services where no port is
// specified
ConnectSidecarMaxPort int
// ExposeMinPort is the inclusive start of the range of ports
// allocated to the agent for exposing checks through a proxy
ExposeMinPort int
// ExposeMinPort is the inclusive start of the range of ports
// allocated to the agent for exposing checks through a proxy
ExposeMaxPort int
// ConnectCAProvider is the type of CA provider to use with Connect.
ConnectCAProvider string
// ConnectCAConfig is the config to use for the CA provider.
ConnectCAConfig map[string]interface{}
// ConnectMeshGatewayWANFederationEnabled determines if wan federation of
// datacenters should exclusively traverse mesh gateways.
ConnectMeshGatewayWANFederationEnabled bool
// ConnectTestCALeafRootChangeSpread is used to control how long the CA leaf
// cache with spread CSRs over when a root change occurs. For now we don't
// expose this in public config intentionally but could later with a rename.
// We only set this from during tests to effectively make CA rotation tests
// deterministic again.
ConnectTestCALeafRootChangeSpread time.Duration
// DNSAddrs contains the list of TCP and UDP addresses the DNS server will
// bind to. If the DNS endpoint is disabled (ports.dns <= 0) the list is
// empty.
//
// The ip addresses are taken from 'addresses.dns' which should contain a
// space separated list of ip addresses and/or go-sockaddr templates.
//
// If 'addresses.dns' was not provided the 'client_addr' addresses are
// used.
//
// The DNS server cannot be bound to UNIX sockets.
//
// hcl: client_addr = string addresses { dns = string } ports { dns = int }
DNSAddrs []net.Addr
// DNSPort is the port the DNS server listens on. The default is 8600.
// Setting this to a value <= 0 disables the endpoint.
//
// hcl: ports { dns = int }
// flags: -dns-port int
DNSPort int
// DNSSOA is the settings applied for DNS SOA
// hcl: soa {}
DNSSOA RuntimeSOAConfig
// DataDir is the path to the directory where the local state is stored.
//
// hcl: data_dir = string
// flag: -data-dir string
DataDir string
// DefaultQueryTime is the amount of time a blocking query will wait before
// Consul will force a response. This value can be overridden by the 'wait'
// query parameter.
//
// hcl: default_query_time = "duration"
// flag: -default-query-time string
DefaultQueryTime time.Duration
// DevMode enables a fast-path mode of operation to bring up an in-memory
// server with minimal configuration. Useful for developing Consul.
//
// flag: -dev
DevMode bool
// DisableAnonymousSignature is used to turn off the anonymous signature
// send with the update check. This is used to deduplicate messages.
//
// hcl: disable_anonymous_signature = (true|false)
DisableAnonymousSignature bool
// DisableCoordinates controls features related to network coordinates.
//
// hcl: disable_coordinates = (true|false)
DisableCoordinates bool
// DisableHostNodeID will prevent Consul from using information from the
// host to generate a node ID, and will cause Consul to generate a
// random ID instead.
//
// hcl: disable_host_node_id = (true|false)
// flag: -disable-host-node-id
DisableHostNodeID bool
// DisableHTTPUnprintableCharFilter will bypass the filter preventing HTTP
// URLs from containing unprintable chars. This filter was added in 1.0.3 as a
// response to a vulnerability report. Disabling this is never recommended in
// general however some users who have keys written in older versions of
// Consul may use this to temporarily disable the filter such that they can
// delete those keys again! We do not recommend leaving it disabled long term.
//
// hcl: disable_http_unprintable_char_filter
DisableHTTPUnprintableCharFilter bool
// DisableKeyringFile disables writing the keyring to a file.
//
// hcl: disable_keyring_file = (true|false)
// flag: -disable-keyring-file
DisableKeyringFile bool
// DisableRemoteExec is used to turn off the remote execution
// feature. This is for security to prevent unknown scripts from running.
//
// hcl: disable_remote_exec = (true|false)
DisableRemoteExec bool
// DisableUpdateCheck is used to turn off the automatic update and
// security bulletin checking.
//
// hcl: disable_update_check = (true|false)
DisableUpdateCheck bool
// DiscardCheckOutput is used to turn off storing and comparing the
// output of health checks. This reduces the write rate on the server
// for checks with highly volatile output. (reloadable)
//
// See also: CheckUpdateInterval
//
// hcl: discard_check_output = (true|false)
DiscardCheckOutput bool
// EnableAgentTLSForChecks is used to apply the agent's TLS settings in
// order to configure the HTTP client used for health checks. Enabling
// this allows HTTP checks to present a client certificate and verify
// the server using the same TLS configuration as the agent (CA, cert,
// and key).
EnableAgentTLSForChecks bool
// EnableCentralServiceConfig controls whether the agent should incorporate
// centralized config such as service-defaults into local service registrations.
//
// hcl: enable_central_service_config = (true|false)
EnableCentralServiceConfig bool
// EnableDebug is used to enable various debugging features.
//
// hcl: enable_debug = (true|false)
EnableDebug bool
// EnableLocalScriptChecks controls whether health checks declared from the local
// config file which execute scripts are enabled. This includes regular script
// checks and Docker checks.
//
// hcl: (enable_script_checks|enable_local_script_checks) = (true|false)
// flag: -enable-script-checks, -enable-local-script-checks
EnableLocalScriptChecks bool
// EnableRemoeScriptChecks controls whether health checks declared from the http API
// which execute scripts are enabled. This includes regular script checks and Docker
// checks.
//
// hcl: enable_script_checks = (true|false)
// flag: -enable-script-checks
EnableRemoteScriptChecks bool
// EncryptKey contains the encryption key to use for the Serf communication.
//
// hcl: encrypt = string
// flag: -encrypt string
EncryptKey string
// GRPCPort is the port the gRPC server listens on. It is disabled by default.
//
// hcl: ports { grpc = int }
// flags: -grpc-port int
GRPCPort int
// GRPCTLSPort is the port the gRPC server listens on. It is disabled by default.
//
// hcl: ports { grpc_tls = int }
// flags: -grpc-tls-port int
GRPCTLSPort int
// GRPCAddrs contains the list of TCP addresses and UNIX sockets the gRPC
// server will bind to. If the gRPC endpoint is disabled (ports.grpc <= 0)
// the list is empty.
//
// The addresses are taken from 'addresses.grpc' which should contain a
// space separated list of ip addresses, UNIX socket paths and/or
// go-sockaddr templates. UNIX socket paths must be written as
// 'unix://<full path>', e.g. 'unix:///var/run/consul-grpc.sock'.
//
// If 'addresses.grpc' was not provided the 'client_addr' addresses are
// used.
//
// hcl: client_addr = string addresses { grpc = string } ports { grpc = int }
GRPCAddrs []net.Addr
// GRPCTLSAddrs contains the list of TCP addresses and UNIX sockets the gRPC
// server will bind to. If the gRPC endpoint is disabled (ports.grpc <= 0)
// the list is empty.
//
// The addresses are taken from 'addresses.grpc_tls' which should contain a
// space separated list of ip addresses, UNIX socket paths and/or
// go-sockaddr templates. UNIX socket paths must be written as
// 'unix://<full path>', e.g. 'unix:///var/run/consul-grpc.sock'.
//
// If 'addresses.grpc_tls' was not provided the 'client_addr' addresses are
// used.
//
// hcl: client_addr = string addresses { grpc_tls = string } ports { grpc_tls = int }
GRPCTLSAddrs []net.Addr
// HTTPAddrs contains the list of TCP addresses and UNIX sockets the HTTP
// server will bind to. If the HTTP endpoint is disabled (ports.http <= 0)
// the list is empty.
//
// The addresses are taken from 'addresses.http' which should contain a
// space separated list of ip addresses, UNIX socket paths and/or
// go-sockaddr templates. UNIX socket paths must be written as
// 'unix://<full path>', e.g. 'unix:///var/run/consul-http.sock'.
//
// If 'addresses.http' was not provided the 'client_addr' addresses are
// used.
//
// hcl: client_addr = string addresses { http = string } ports { http = int }
HTTPAddrs []net.Addr
// HTTPPort is the port the HTTP server listens on. The default is 8500.
// Setting this to a value <= 0 disables the endpoint.
//
// hcl: ports { http = int }
// flags: -http-port int
HTTPPort int
// HTTPSAddrs contains the list of TCP addresses and UNIX sockets the HTTPS
// server will bind to. If the HTTPS endpoint is disabled (ports.https <=
// 0) the list is empty.
//
// The addresses are taken from 'addresses.https' which should contain a
// space separated list of ip addresses, UNIX socket paths and/or
// go-sockaddr templates. UNIX socket paths must be written as
// 'unix://<full path>', e.g. 'unix:///var/run/consul-https.sock'.
//
// If 'addresses.https' was not provided the 'client_addr' addresses are
// used.
//
// hcl: client_addr = string addresses { https = string } ports { https = int }
HTTPSAddrs []net.Addr
// HTTPMaxConnsPerClient limits the number of concurrent TCP connections the
// HTTP(S) server will accept from any single source IP address.
//
// hcl: limits{ http_max_conns_per_client = 200 }
HTTPMaxConnsPerClient int
// HTTPMaxHeaderBytes controls the maximum number of bytes the
// server will read parsing the request header's keys and
// values, including the request line. It does not limit the
// size of the request body.
//
// If zero, or negative, http.DefaultMaxHeaderBytes is used.
HTTPMaxHeaderBytes int
// HTTPSHandshakeTimeout is the time allowed for HTTPS client to complete the
// TLS handshake and send first bytes of the request.
//
// hcl: limits{ https_handshake_timeout = "5s" }
HTTPSHandshakeTimeout time.Duration
// HTTPSPort is the port the HTTP server listens on. The default is -1.
// Setting this to a value <= 0 disables the endpoint.
//
// hcl: ports { https = int }
// flags: -https-port int
HTTPSPort int
// KVMaxValueSize controls the max allowed value size. If not set defaults
// to raft's suggested max value size.
//
// hcl: limits { kv_max_value_size = uint64 }
KVMaxValueSize uint64
// LeaveDrainTime is used to wait after a server has left the LAN Serf
// pool for RPCs to drain and new requests to be sent to other servers.
//
// hcl: performance { leave_drain_time = "duration" }
LeaveDrainTime time.Duration
// LeaveOnTerm controls if Serf does a graceful leave when receiving
// the TERM signal. Defaults true on clients, false on servers. (reloadable)
//
// hcl: leave_on_terminate = (true|false)
LeaveOnTerm bool
// Logging configuration used to initialize agent logging.
Logging logging.Config
// MaxQueryTime is the maximum amount of time a blocking query can wait
// before Consul will force a response. Consul applies jitter to the wait
// time. The jittered time will be capped to MaxQueryTime.
//
// hcl: max_query_time = "duration"
// flags: -max-query-time string
MaxQueryTime time.Duration
// Node ID is a unique ID for this node across space and time. Defaults
// to a randomly-generated ID that persists in the data-dir.
//
// todo(fs): don't we have a requirement for this to be a UUID in a specific format?
//
// hcl: node_id = string
// flag: -node-id string
NodeID types.NodeID
// NodeMeta contains metadata key/value pairs. These are excluded from JSON output
// because they can be reloaded and might be stale when shown from the
// config instead of the local state.
// todo(fs): should the sanitizer omit them from output as well since they could be stale?
//
// hcl: node_meta = map[string]string
// flag: -node-meta "key:value" -node-meta "key:value" ...
NodeMeta map[string]string
// ReadReplica is whether this server will act as a non-voting member
// of the cluster to help provide read scalability. (Enterprise-only)
//
// hcl: non_voting_server = (true|false)
// flag: -non-voting-server
ReadReplica bool
// PeeringEnabled enables cluster peering. This setting only applies for servers.
// When disabled, all peering RPC endpoints will return errors,
// peering requests from other clusters will receive errors, and any peerings already stored in this server's
// state will be ignored.
//
// hcl: peering { enabled = (true|false) }
PeeringEnabled bool
// TestAllowPeerRegistrations controls whether CatalogRegister endpoints allow
// registrations for objects with `PeerName`
PeeringTestAllowPeerRegistrations bool
// PidFile is the file to store our PID in.
//
// hcl: pid_file = string
PidFile string
// PrimaryDatacenter is the central datacenter that holds authoritative
// ACL records, replicates intentions and holds the root CA for Connect.
// This must be the same for the entire cluster. Off by default.
//
// hcl: primary_datacenter = string
PrimaryDatacenter string
// PrimaryGateways is a list of addresses and/or go-discover expressions to
// discovery the mesh gateways in the primary datacenter. See
// https://www.consul.io/docs/agent/config/cli-flags#cloud-auto-joining for
// details.
//
// hcl: primary_gateways = []string
// flag: -primary-gateway string -primary-gateway string
PrimaryGateways []string
// PrimaryGatewaysInterval specifies the amount of time to wait in between discovery
// attempts on agent start. The minimum allowed value is 1 second and
// the default is 30s.
//
// hcl: primary_gateways_interval = "duration"
PrimaryGatewaysInterval time.Duration
// RPCAdvertiseAddr is the TCP address Consul advertises for its RPC endpoint.
// By default this is the bind address on the default RPC Server port. If the
// advertise address is specified then it is used.
//
// hcl: bind_addr = string advertise_addr = string ports { server = int }
RPCAdvertiseAddr *net.TCPAddr
// RPCBindAddr is the TCP address Consul will bind to for its RPC endpoint.
// By default this is the bind address on the default RPC Server port.
//
// hcl: bind_addr = string ports { server = int }
RPCBindAddr *net.TCPAddr
// RPCHandshakeTimeout is the timeout for reading the initial magic byte on a
// new RPC connection. If this is set high it may allow unauthenticated users
// to hold connections open arbitrarily long, even when mutual TLS is being
// enforced. It may be set to 0 explicitly to disable the timeout but this
// should never be used in production. Default is 5 seconds.
//
// hcl: limits { rpc_handshake_timeout = "duration" }
RPCHandshakeTimeout time.Duration
// RPCHoldTimeout is how long an RPC can be "held" before it is errored.
// This is used to paper over a loss of leadership by instead holding RPCs,
// so that the caller experiences a slow response rather than an error.
// This period is meant to be long enough for a leader election to take
// place, and a small jitter is applied to avoid a thundering herd.
//
// hcl: performance { rpc_hold_timeout = "duration" }
RPCHoldTimeout time.Duration
// RPCRateLimit and RPCMaxBurst control how frequently RPC calls are allowed
// to happen. In any large enough time interval, rate limiter limits the
// rate to RPCRateLimit tokens per second, with a maximum burst size of
// RPCMaxBurst events. As a special case, if RPCRateLimit == Inf (the infinite
// rate), RPCMaxBurst is ignored.
//
// See https://en.wikipedia.org/wiki/Token_bucket for more about token
// buckets.
//
// hcl: limit { rpc_rate = (float64|MaxFloat64) rpc_max_burst = int }
RPCRateLimit rate.Limit
RPCMaxBurst int
// RPCMaxConnsPerClient limits the number of concurrent TCP connections the
// RPC server will accept from any single source IP address.
//
// hcl: limits{ rpc_max_conns_per_client = 100 }
RPCMaxConnsPerClient int
// RPCProtocol is the Consul protocol version to use.
//
// hcl: protocol = int
RPCProtocol int
RPCConfig consul.RPCConfig
// UseStreamingBackend enables streaming as a replacement for agent/cache
// in the client agent for endpoints which support streaming.
UseStreamingBackend bool
// RaftProtocol sets the Raft protocol version to use on this server.
// Defaults to 3.
//
// hcl: raft_protocol = int
RaftProtocol int
// RaftSnapshotThreshold sets the minimum threshold of raft commits after which
// a snapshot is created. Defaults to 8192
//
// hcl: raft_snapshot_threshold = int
RaftSnapshotThreshold int
// RaftSnapshotInterval sets the interval to use when checking whether to create
// a new snapshot. Defaults to 5 seconds.
// hcl: raft_snapshot_threshold = int
RaftSnapshotInterval time.Duration
// RaftTrailingLogs sets the number of log entries that will be left in the
// log store after a snapshot. This must be large enough that a follower can
// transfer and restore an entire snapshot of the state before this many new
// entries have been appended. In vast majority of cases the default is plenty
// but if there is a sustained high write throughput coupled with a huge
// multi-gigabyte snapshot setting this higher may be necessary to allow
// followers time to reload from snapshot without becoming unhealthy. If it's
// too low then followers are unable to ever recover from a restart and will
// enter a loop of constantly downloading full snapshots and never catching
// up. If you need to change this you should reconsider your usage of Consul
// as it is not designed to store multiple-gigabyte data sets with high write
// throughput. Defaults to 10000.
//
// hcl: raft_trailing_logs = int
RaftTrailingLogs int
RaftBoltDBConfig consul.RaftBoltDBConfig
// ReconnectTimeoutLAN specifies the amount of time to wait to reconnect with
// another agent before deciding it's permanently gone. This can be used to
// control the time it takes to reap failed nodes from the cluster.
//
// hcl: reconnect_timeout = "duration"
ReconnectTimeoutLAN time.Duration
// ReconnectTimeoutWAN specifies the amount of time to wait to reconnect with
// another agent before deciding it's permanently gone. This can be used to
// control the time it takes to reap failed nodes from the cluster.
//
// hcl: reconnect_timeout = "duration"
ReconnectTimeoutWAN time.Duration
// AdvertiseReconnectTimeout specifies the amount of time other agents should
// wait for us to reconnect before deciding we are permanently gone. This
// should only be set for client agents that are run in a stateless or
// ephemeral manner in order to realize their deletion sooner than we
// would otherwise.
AdvertiseReconnectTimeout time.Duration
// RejoinAfterLeave controls our interaction with the cluster after leave.
// When set to false (default), a leave causes Consul to not rejoin
// the cluster until an explicit join is received. If this is set to
// true, we ignore the leave, and rejoin the cluster on start.
//
// hcl: rejoin_after_leave = (true|false)
// flag: -rejoin
RejoinAfterLeave bool
// RetryJoinIntervalLAN specifies the amount of time to wait in between join
// attempts on agent start. The minimum allowed value is 1 second and
// the default is 30s.
//
// hcl: retry_interval = "duration"
RetryJoinIntervalLAN time.Duration
// RetryJoinIntervalWAN specifies the amount of time to wait in between join
// attempts on agent start. The minimum allowed value is 1 second and
// the default is 30s.
//
// hcl: retry_interval_wan = "duration"
RetryJoinIntervalWAN time.Duration
// RetryJoinLAN is a list of addresses and/or go-discover expressions to
// join with retry enabled. See
// https://www.consul.io/docs/agent/config/cli-flags#cloud-auto-joining for
// details.
//
// hcl: retry_join = []string
// flag: -retry-join string -retry-join string
RetryJoinLAN []string
// RetryJoinMaxAttemptsLAN specifies the maximum number of times to retry
// joining a host on startup. This is useful for cases where we know the
// node will be online eventually.
//
// hcl: retry_max = int
// flag: -retry-max int
RetryJoinMaxAttemptsLAN int
// RetryJoinMaxAttemptsWAN specifies the maximum number of times to retry
// joining a host on startup. This is useful for cases where we know the
// node will be online eventually.
//
// hcl: retry_max_wan = int
// flag: -retry-max-wan int
RetryJoinMaxAttemptsWAN int
// RetryJoinWAN is a list of addresses and/or go-discover expressions to
// join -wan with retry enabled. See
// https://www.consul.io/docs/agent/config/cli-flags#cloud-auto-joining for
// details.
//
// hcl: retry_join_wan = []string
// flag: -retry-join-wan string -retry-join-wan string
RetryJoinWAN []string
// SegmentName is the network segment for this client to join.
// (Enterprise-only)
//
// hcl: segment = string
SegmentName string
// Segments is the list of network segments for this server to
// initialize.
//
// hcl: segment = [
// {
// # name is the name of the segment
// name = string
//
// # bind is the bind ip address for this segment.
// bind = string
//
// # port is the bind port for this segment.
// port = int
//
// # advertise is the advertise ip address for this segment.
// # Defaults to the bind address if not set.
// advertise = string
//
// # rpc_listener controls whether or not to bind a separate
// # RPC listener to the bind address.
// rpc_listener = (true|false)
// },
// ...
// ]
Segments []structs.NetworkSegment
// SerfAdvertiseAddrLAN is the TCP address which is used for advertising
// the LAN Gossip pool for both client and server. The address is the
// combination of AdvertiseAddrLAN and the SerfPortLAN. If the advertise
// address is not given the bind address is used.
//
// hcl: bind_addr = string advertise_addr = string ports { serf_lan = int }
SerfAdvertiseAddrLAN *net.TCPAddr
// SerfAdvertiseAddrWAN is the TCP address which is used for advertising
// the WAN Gossip pool on the server only. The address is the combination
// of AdvertiseAddrWAN and the SerfPortWAN. If the advertise address is not
// given the bind address is used.
//
// hcl: bind_addr = string advertise_addr_wan = string ports { serf_wan = int }
SerfAdvertiseAddrWAN *net.TCPAddr
// SerfAllowedCIDRsLAN if set to a non-empty value, will restrict which networks
// are allowed to connect to Serf on the LAN.
// hcl: serf_lan_allowed_cidrs = []string
// flag: serf-lan-allowed-cidrs string (can be specified multiple times)
SerfAllowedCIDRsLAN []net.IPNet
// SerfAllowedCIDRsWAN if set to a non-empty value, will restrict which networks
// are allowed to connect to Serf on the WAN.
// hcl: serf_wan_allowed_cidrs = []string
// flag: serf-wan-allowed-cidrs string (can be specified multiple times)
SerfAllowedCIDRsWAN []net.IPNet
// SerfBindAddrLAN is the address to bind the Serf LAN TCP and UDP
// listeners to. The ip address is either the default bind address or the
// 'serf_lan' address which can be either an ip address or a go-sockaddr
// template which resolves to a single ip address.
//
// hcl: bind_addr = string serf_lan = string ports { serf_lan = int }
// flag: -serf-lan string
SerfBindAddrLAN *net.TCPAddr
// SerfBindAddrWAN is the address to bind the Serf WAN TCP and UDP
// listeners to. The ip address is either the default bind address or the
// 'serf_wan' address which can be either an ip address or a go-sockaddr
// template which resolves to a single ip address.
//
// hcl: bind_addr = string serf_wan = string ports { serf_wan = int }
// flag: -serf-wan string
SerfBindAddrWAN *net.TCPAddr
// SerfPortLAN is the port used for the LAN Gossip pool for both client and server.
// The default is 8301.
//
// hcl: ports { serf_lan = int }
SerfPortLAN int
// SerfPortWAN is the port used for the WAN Gossip pool for the server only.
// The default is 8302.
//
// hcl: ports { serf_wan = int }
SerfPortWAN int
// GossipLANGossipInterval is the interval between sending messages that need
// to be gossiped that haven't been able to piggyback on probing messages.
// If this is set to zero, non-piggyback gossip is disabled. By lowering
// this value (more frequent) gossip messages are propagated across
// the cluster more quickly at the expense of increased bandwidth. This
// configuration only applies to LAN gossip communications
//
// The default is: 200ms
//
// hcl: gossip_lan { gossip_interval = duration}
GossipLANGossipInterval time.Duration
// GossipLANGossipNodes is the number of random nodes to send gossip messages to
// per GossipInterval. Increasing this number causes the gossip messages to
// propagate across the cluster more quickly at the expense of increased
// bandwidth. This configuration only applies to LAN gossip communications
//
// The default is: 3
//
// hcl: gossip_lan { gossip_nodes = int }
GossipLANGossipNodes int
// GossipLANProbeInterval is the interval between random node probes. Setting
// this lower (more frequent) will cause the memberlist cluster to detect
// failed nodes more quickly at the expense of increased bandwidth usage.
// This configuration only applies to LAN gossip communications
//
// The default is: 1s
//
// hcl: gossip_lan { probe_interval = duration }
GossipLANProbeInterval time.Duration
// GossipLANProbeTimeout is the timeout to wait for an ack from a probed node
// before assuming it is unhealthy. This should be set to 99-percentile
// of RTT (round-trip time) on your network. This configuration
// only applies to the LAN gossip communications
//
// The default is: 500ms
//
// hcl: gossip_lan { probe_timeout = duration }
GossipLANProbeTimeout time.Duration
// GossipLANSuspicionMult is the multiplier for determining the time an
// inaccessible node is considered suspect before declaring it dead. This
// configuration only applies to LAN gossip communications
//
// The actual timeout is calculated using the formula:
//
// SuspicionTimeout = SuspicionMult * log(N+1) * ProbeInterval
//
// This allows the timeout to scale properly with expected propagation
// delay with a larger cluster size. The higher the multiplier, the longer
// an inaccessible node is considered part of the cluster before declaring
// it dead, giving that suspect node more time to refute if it is indeed
// still alive.
//
// The default is: 4
//
// hcl: gossip_lan { suspicion_mult = int }
GossipLANSuspicionMult int
// GossipLANRetransmitMult is the multiplier for the number of retransmissions
// that are attempted for messages broadcasted over gossip. This
// configuration only applies to LAN gossip communications. The actual
// count of retransmissions is calculated using the formula:
//
// Retransmits = RetransmitMult * log(N+1)
//
// This allows the retransmits to scale properly with cluster size. The
// higher the multiplier, the more likely a failed broadcast is to converge
// at the expense of increased bandwidth.
//
// The default is: 4
//
// hcl: gossip_lan { retransmit_mult = int }
GossipLANRetransmitMult int
// GossipWANGossipInterval is the interval between sending messages that need
// to be gossiped that haven't been able to piggyback on probing messages.
// If this is set to zero, non-piggyback gossip is disabled. By lowering
// this value (more frequent) gossip messages are propagated across
// the cluster more quickly at the expense of increased bandwidth. This
// configuration only applies to WAN gossip communications
//
// The default is: 500ms
//
// hcl: gossip_wan { gossip_interval = duration}
GossipWANGossipInterval time.Duration
// GossipWANGossipNodes is the number of random nodes to send gossip messages to
// per GossipInterval. Increasing this number causes the gossip messages to
// propagate across the cluster more quickly at the expense of increased
// bandwidth. This configuration only applies to WAN gossip communications
//
// The default is: 4
//
// hcl: gossip_wan { gossip_nodes = int }
GossipWANGossipNodes int
// GossipWANProbeInterval is the interval between random node probes. Setting
// this lower (more frequent) will cause the memberlist cluster to detect
// failed nodes more quickly at the expense of increased bandwidth usage.
// This configuration only applies to WAN gossip communications
//
// The default is: 5s
//
// hcl: gossip_wan { probe_interval = duration }
GossipWANProbeInterval time.Duration
// GossipWANProbeTimeout is the timeout to wait for an ack from a probed node
// before assuming it is unhealthy. This should be set to 99-percentile
// of RTT (round-trip time) on your network. This configuration
// only applies to the WAN gossip communications
//
// The default is: 3s
//
// hcl: gossip_wan { probe_timeout = duration }
GossipWANProbeTimeout time.Duration
// GossipWANSuspicionMult is the multiplier for determining the time an
// inaccessible node is considered suspect before declaring it dead. This
// configuration only applies to WAN gossip communications
//
// The actual timeout is calculated using the formula:
//
// SuspicionTimeout = SuspicionMult * log(N+1) * ProbeInterval
//
// This allows the timeout to scale properly with expected propagation
// delay with a larger cluster size. The higher the multiplier, the longer
// an inaccessible node is considered part of the cluster before declaring
// it dead, giving that suspect node more time to refute if it is indeed
// still alive.
//
// The default is: 6
//
// hcl: gossip_wan { suspicion_mult = int }
GossipWANSuspicionMult int
// GossipWANRetransmitMult is the multiplier for the number of retransmissions
// that are attempted for messages broadcasted over gossip. This
// configuration only applies to WAN gossip communications. The actual
// count of retransmissions is calculated using the formula:
//
// Retransmits = RetransmitMult * log(N+1)
//
// This allows the retransmits to scale properly with cluster size. The
// higher the multiplier, the more likely a failed broadcast is to converge
// at the expense of increased bandwidth.
//
// The default is: 4
//
// hcl: gossip_wan { retransmit_mult = int }
GossipWANRetransmitMult int
// ServerMode controls if this agent acts like a Consul server,
// or merely as a client. Servers have more state, take part
// in leader election, etc.
//
// hcl: server = (true|false)
// flag: -server
ServerMode bool
// ServerName is used with the TLS certificates to ensure the name we
// provide matches the certificate.
//
// hcl: server_name = string
ServerName string
// ServerPort is the port the RPC server will bind to.
// The default is 8300.
//
// hcl: ports { server = int }
ServerPort int
// Services contains the provided service definitions:
//
// hcl: services = [
// {
// id = string
// name = string
// tags = []string
// address = string
// check = { check definition }
// checks = [ { check definition}, ... ]
// token = string
// enable_tag_override = (true|false)
// },
// ...
// ]
Services []*structs.ServiceDefinition
// Minimum Session TTL.
//
// hcl: session_ttl_min = "duration"
SessionTTLMin time.Duration
// SkipLeaveOnInt controls if Serf skips a graceful leave when
// receiving the INT signal. Defaults false on clients, true on
// servers. (reloadable)
//
// hcl: skip_leave_on_interrupt = (true|false)
SkipLeaveOnInt bool
// AutoReloadConfig indicate if the config will be
//auto reloaded bases on config file modification
// hcl: auto_reload_config = (true|false)
AutoReloadConfig bool
// StartJoinAddrsLAN is a list of addresses to attempt to join -lan when the
// agent starts. If Serf is unable to communicate with any of these
// addresses, then the agent will error and exit.
//
// hcl: start_join = []string
// flag: -join string -join string
StartJoinAddrsLAN []string
// StartJoinWAN is a list of addresses to attempt to join -wan when the
// agent starts. If Serf is unable to communicate with any of these
// addresses, then the agent will error and exit.
//
// hcl: start_join_wan = []string
// flag: -join-wan string -join-wan string
StartJoinAddrsWAN []string
// TLS configures certificates, CA, cipher suites, and other TLS settings
// on Consul's listeners (i.e. Internal multiplexed RPC, HTTPS and gRPC).
//
// hcl: tls { ... }
TLS tlsutil.Config
// TaggedAddresses are used to publish a set of addresses for
// for a node, which can be used by the remote agent. We currently
// populate only the "wan" tag based on the SerfWan advertise address,
// but this structure is here for possible future features with other
// user-defined tags. The "wan" tag will be used by remote agents if
// they are configured with TranslateWANAddrs set to true.
//
// hcl: tagged_addresses = map[string]string
TaggedAddresses map[string]string
// TranslateWANAddrs controls whether or not Consul should prefer
// the "wan" tagged address when doing lookups in remote datacenters.
// See TaggedAddresses below for more details.
//
// hcl: translate_wan_addrs = (true|false)
TranslateWANAddrs bool
// TxnMaxReqLen configures the upper limit for the size (in bytes) of the
// incoming request bodies for transactions to the /txn endpoint.
//
// hcl: limits { txn_max_req_len = uint64 }
TxnMaxReqLen uint64
// UIConfig holds various runtime options that control both the agent's
// behavior while serving the UI (e.g. whether it's enabled, what path it's
// mounted on) as well as options that enable or disable features within the
// UI.
//
// NOTE: Never read from this field directly once the agent has started up
// since the UI config is reloadable. The on in the agent's config field may
// be out of date. Use the agent.getUIConfig() method to get the latest config
// in a thread-safe way.
//
// hcl: ui_config { ... }
UIConfig UIConfig
// UnixSocketGroup contains the group of the file permissions when
// Consul binds to UNIX sockets.
//
// hcl: unix_sockets { group = string }
UnixSocketGroup string
// UnixSocketMode contains the mode of the file permissions when
// Consul binds to UNIX sockets.
//
// hcl: unix_sockets { mode = string }
UnixSocketMode string
// UnixSocketUser contains the user of the file permissions when
// Consul binds to UNIX sockets.
//
// hcl: unix_sockets { user = string }
UnixSocketUser string
StaticRuntimeConfig StaticRuntimeConfig
// Watches are used to monitor various endpoints and to invoke a
// handler to act appropriately. These are managed entirely in the
// agent layer using the standard APIs.
//
// See https://www.consul.io/docs/agent/watches.html for details.
//
// hcl: watches = [
// { type=string ... },
// { type=string ... },
// ...
// ]
//
Watches []map[string]interface{}
// AutoReloadConfigCoalesceInterval Coalesce Interval for auto reload config
AutoReloadConfigCoalesceInterval time.Duration
EnterpriseRuntimeConfig
}
type AutoConfig struct {
Enabled bool
IntroToken string
IntroTokenFile string
ServerAddresses []string
DNSSANs []string
IPSANs []net.IP
Authorizer AutoConfigAuthorizer
}
type AutoConfigAuthorizer struct {
Enabled bool
AuthMethod structs.ACLAuthMethod
// AuthMethodConfig ssoauth.Config
ClaimAssertions []string
AllowReuse bool
}
type UIConfig struct {
Enabled bool
Dir string
ContentPath string
MetricsProvider string
MetricsProviderFiles []string
MetricsProviderOptionsJSON string
MetricsProxy UIMetricsProxy
DashboardURLTemplates map[string]string
HCPEnabled bool
}
type UIMetricsProxy struct {
BaseURL string
AddHeaders []UIMetricsProxyAddHeader
PathAllowlist []string
}
type UIMetricsProxyAddHeader struct {
Name string
Value string
}
func (c *RuntimeConfig) apiAddresses(maxPerType int) (unixAddrs, httpAddrs, httpsAddrs []string) {
if len(c.HTTPSAddrs) > 0 {
for i, addr := range c.HTTPSAddrs {
if maxPerType < 1 || i < maxPerType {
httpsAddrs = append(httpsAddrs, addr.String())
} else {
break
}
}
}
if len(c.HTTPAddrs) > 0 {
unix_count := 0
http_count := 0
for _, addr := range c.HTTPAddrs {
switch addr.(type) {
case *net.UnixAddr:
if maxPerType < 1 || unix_count < maxPerType {
unixAddrs = append(unixAddrs, addr.String())
unix_count += 1
}
default:
if maxPerType < 1 || http_count < maxPerType {
httpAddrs = append(httpAddrs, addr.String())
http_count += 1
}
}
}
}
return
}
func (c *RuntimeConfig) ClientAddress() (unixAddr, httpAddr, httpsAddr string) {
unixAddrs, httpAddrs, httpsAddrs := c.apiAddresses(0)
if len(unixAddrs) > 0 {
unixAddr = "unix://" + unixAddrs[0]
}
http_any := ""
if len(httpAddrs) > 0 {
for _, addr := range httpAddrs {
host, port, err := net.SplitHostPort(addr)
if err != nil {
continue
}
if host == "0.0.0.0" || host == "::" {
if http_any == "" {
if host == "0.0.0.0" {
http_any = net.JoinHostPort("127.0.0.1", port)
} else {
http_any = net.JoinHostPort("::1", port)
}
}
continue
}
httpAddr = addr
break
}
if httpAddr == "" && http_any != "" {
httpAddr = http_any
}
}
https_any := ""
if len(httpsAddrs) > 0 {
for _, addr := range httpsAddrs {
host, port, err := net.SplitHostPort(addr)
if err != nil {
continue
}
if host == "0.0.0.0" || host == "::" {
if https_any == "" {
if host == "0.0.0.0" {
https_any = net.JoinHostPort("127.0.0.1", port)
} else {
https_any = net.JoinHostPort("::1", port)
}
}
continue
}
httpsAddr = addr
break
}
if httpsAddr == "" && https_any != "" {
httpsAddr = https_any
}
}
return
}
func (c *RuntimeConfig) ConnectCAConfiguration() (*structs.CAConfiguration, error) {
ca := &structs.CAConfiguration{
Provider: "consul",
Config: map[string]interface{}{
"LeafCertTTL": structs.DefaultLeafCertTTL,
"IntermediateCertTTL": structs.DefaultIntermediateCertTTL,
"RootCertTTL": structs.DefaultRootCertTTL,
},
}
// Allow config to specify cluster_id provided it's a valid UUID. This is
// meant only for tests where a deterministic ID makes fixtures much simpler
// to work with but since it's only read on initial cluster bootstrap it's not
// that much of a liability in production. The worst a user could do is
// configure logically separate clusters with same ID by mistake but we can
// avoid documenting this is even an option.
if clusterID, ok := c.ConnectCAConfig["cluster_id"]; ok {
// If they tried to specify an ID but typoed it then don't ignore as they
// will then bootstrap with a new ID and have to throw away the whole cluster
// and start again.
// ensure the cluster_id value in the opaque config is a string
cIDStr, ok := clusterID.(string)
if !ok {
return nil, fmt.Errorf("cluster_id was supplied but was not a string")
}
// ensure that the cluster_id string is a valid UUID
_, err := uuid.ParseUUID(cIDStr)
if err != nil {
return nil, fmt.Errorf("cluster_id was supplied but was not a valid UUID")
}
// now that we know the cluster_id is okay we can set it in the CAConfiguration
ca.ClusterID = cIDStr
}
if c.ConnectCAProvider != "" {
ca.Provider = c.ConnectCAProvider
}
// Merge connect CA Config regardless of provider (since there are some
// common config options valid to all like leaf TTL).
for k, v := range c.ConnectCAConfig {
ca.Config[k] = v
}
return ca, nil
}
func (c *RuntimeConfig) APIConfig(includeClientCerts bool) (*api.Config, error) {
tls := c.TLS.HTTPS
cfg := &api.Config{
Datacenter: c.Datacenter,
TLSConfig: api.TLSConfig{InsecureSkipVerify: !tls.VerifyOutgoing},
}
unixAddr, httpAddr, httpsAddr := c.ClientAddress()
if httpsAddr != "" {
cfg.Address = httpsAddr
cfg.Scheme = "https"
cfg.TLSConfig.CAFile = tls.CAFile
cfg.TLSConfig.CAPath = tls.CAPath
if includeClientCerts {
cfg.TLSConfig.CertFile = tls.CertFile
cfg.TLSConfig.KeyFile = tls.KeyFile
}
} else if httpAddr != "" {
cfg.Address = httpAddr
cfg.Scheme = "http"
} else if unixAddr != "" {
cfg.Address = unixAddr
// this should be ignored - however we are still talking http over a unix socket
// so it makes sense to set it like this
cfg.Scheme = "http"
} else {
return nil, fmt.Errorf("No suitable client address can be found")
}
return cfg, nil
}
func (c *RuntimeConfig) VersionWithMetadata() string {
version := c.Version
if c.VersionMetadata != "" {
version += "+" + c.VersionMetadata
}
return version
}
// Sanitized returns a JSON/HCL compatible representation of the runtime
// configuration where all fields with potential secrets had their
// values replaced by 'hidden'. In addition, network addresses and
// time.Duration values are formatted to improve readability.
func (c *RuntimeConfig) Sanitized() map[string]interface{} {
return sanitize("rt", reflect.ValueOf(c)).Interface().(map[string]interface{})
}
// isSecret determines whether a field name represents a field which
// may contain a secret.
func isSecret(name string) bool {
// special cases for AuthMethod locality and intro token file
if name == "TokenLocality" || name == "IntroTokenFile" {
return false
}
name = strings.ToLower(name)
return strings.Contains(name, "key") || strings.Contains(name, "token") || strings.Contains(name, "secret")
}
// cleanRetryJoin sanitizes the go-discover config strings key=val key=val...
// by scrubbing the individual key=val combinations.
func cleanRetryJoin(a string) string {
var fields []string
for _, f := range strings.Fields(a) {
if isSecret(f) {
kv := strings.SplitN(f, "=", 2)
fields = append(fields, kv[0]+"=hidden")
} else {
fields = append(fields, f)
}
}
return strings.Join(fields, " ")
}
func sanitize(name string, v reflect.Value) reflect.Value {
typ := v.Type()
switch {
// check before isStruct and isPtr
case isNetAddr(typ):
if v.IsNil() {
return reflect.ValueOf("")
}
switch x := v.Interface().(type) {
case *net.TCPAddr:
return reflect.ValueOf("tcp://" + x.String())
case *net.UDPAddr:
return reflect.ValueOf("udp://" + x.String())
case *net.UnixAddr:
return reflect.ValueOf("unix://" + x.String())
case *net.IPAddr:
return reflect.ValueOf(x.IP.String())
case *net.IPNet:
return reflect.ValueOf(x.String())
default:
return v
}
// check before isNumber
case isDuration(typ):
x := v.Interface().(time.Duration)
return reflect.ValueOf(x.String())
case isTime(typ):
x := v.Interface().(time.Time)
return reflect.ValueOf(x.String())
case isString(typ):
if strings.HasPrefix(name, "RetryJoinLAN[") || strings.HasPrefix(name, "RetryJoinWAN[") {
x := v.Interface().(string)
return reflect.ValueOf(cleanRetryJoin(x))
}
if isSecret(name) {
return reflect.ValueOf("hidden")
}
return v
case isNumber(typ) || isBool(typ):
return v
case isPtr(typ):
if v.IsNil() {
return v
}
return sanitize(name, v.Elem())
case isStruct(typ):
m := map[string]interface{}{}
for i := 0; i < typ.NumField(); i++ {
key := typ.Field(i).Name
m[key] = sanitize(key, v.Field(i)).Interface()
}
return reflect.ValueOf(m)
case isArray(typ) || isSlice(typ):
ma := make([]interface{}, 0, v.Len())
if name == "AddHeaders" {
// must be UIConfig.MetricsProxy.AddHeaders
for i := 0; i < v.Len(); i++ {
addr := v.Index(i).Addr()
hdr := addr.Interface().(*UIMetricsProxyAddHeader)
hm := map[string]interface{}{
"Name": hdr.Name,
"Value": "hidden",
}
ma = append(ma, hm)
}
return reflect.ValueOf(ma)
}
if strings.HasPrefix(name, "SerfAllowedCIDRs") {
for i := 0; i < v.Len(); i++ {
addr := v.Index(i).Addr()
ip := addr.Interface().(*net.IPNet)
ma = append(ma, ip.String())
}
return reflect.ValueOf(ma)
}
for i := 0; i < v.Len(); i++ {
ma = append(ma, sanitize(fmt.Sprintf("%s[%d]", name, i), v.Index(i)).Interface())
}
return reflect.ValueOf(ma)
case isMap(typ):
m := map[string]interface{}{}
for _, k := range v.MapKeys() {
key := k.String()
m[key] = sanitize(key, v.MapIndex(k)).Interface()
}
return reflect.ValueOf(m)
default:
return v
}
}
func isDuration(t reflect.Type) bool { return t == reflect.TypeOf(time.Second) }
func isTime(t reflect.Type) bool { return t == reflect.TypeOf(time.Time{}) }
func isMap(t reflect.Type) bool { return t.Kind() == reflect.Map }
func isNetAddr(t reflect.Type) bool { return t.Implements(reflect.TypeOf((*net.Addr)(nil)).Elem()) }
func isPtr(t reflect.Type) bool { return t.Kind() == reflect.Ptr }
func isArray(t reflect.Type) bool { return t.Kind() == reflect.Array }
func isSlice(t reflect.Type) bool { return t.Kind() == reflect.Slice }
func isString(t reflect.Type) bool { return t.Kind() == reflect.String }
func isStruct(t reflect.Type) bool { return t.Kind() == reflect.Struct }
func isBool(t reflect.Type) bool { return t.Kind() == reflect.Bool }
func isNumber(t reflect.Type) bool { return isInt(t) || isUint(t) || isFloat(t) || isComplex(t) }
func isInt(t reflect.Type) bool {
return t.Kind() == reflect.Int ||
t.Kind() == reflect.Int8 ||
t.Kind() == reflect.Int16 ||
t.Kind() == reflect.Int32 ||
t.Kind() == reflect.Int64
}
func isUint(t reflect.Type) bool {
return t.Kind() == reflect.Uint ||
t.Kind() == reflect.Uint8 ||
t.Kind() == reflect.Uint16 ||
t.Kind() == reflect.Uint32 ||
t.Kind() == reflect.Uint64
}
func isFloat(t reflect.Type) bool { return t.Kind() == reflect.Float32 || t.Kind() == reflect.Float64 }
func isComplex(t reflect.Type) bool {
return t.Kind() == reflect.Complex64 || t.Kind() == reflect.Complex128
}
// ApplyDefaultQueryOptions returns a function which will set default values on
// the options based on the configuration. The RuntimeConfig must not be nil.
func ApplyDefaultQueryOptions(config *RuntimeConfig) func(options *structs.QueryOptions) {
return func(options *structs.QueryOptions) {
switch {
case options.MaxQueryTime > config.MaxQueryTime:
options.MaxQueryTime = config.MaxQueryTime
case options.MaxQueryTime == 0:
options.MaxQueryTime = config.DefaultQueryTime
}
}
}