open-consul/vendor/github.com/hashicorp/raft/snapshot.go

240 lines
7.5 KiB
Go

package raft
import (
"fmt"
"io"
"time"
"github.com/armon/go-metrics"
)
// SnapshotMeta is for metadata of a snapshot.
type SnapshotMeta struct {
// Version is the version number of the snapshot metadata. This does not cover
// the application's data in the snapshot, that should be versioned
// separately.
Version SnapshotVersion
// ID is opaque to the store, and is used for opening.
ID string
// Index and Term store when the snapshot was taken.
Index uint64
Term uint64
// Peers is deprecated and used to support version 0 snapshots, but will
// be populated in version 1 snapshots as well to help with upgrades.
Peers []byte
// Configuration and ConfigurationIndex are present in version 1
// snapshots and later.
Configuration Configuration
ConfigurationIndex uint64
// Size is the size of the snapshot in bytes.
Size int64
}
// SnapshotStore interface is used to allow for flexible implementations
// of snapshot storage and retrieval. For example, a client could implement
// a shared state store such as S3, allowing new nodes to restore snapshots
// without streaming from the leader.
type SnapshotStore interface {
// Create is used to begin a snapshot at a given index and term, and with
// the given committed configuration. The version parameter controls
// which snapshot version to create.
Create(version SnapshotVersion, index, term uint64, configuration Configuration,
configurationIndex uint64, trans Transport) (SnapshotSink, error)
// List is used to list the available snapshots in the store.
// It should return then in descending order, with the highest index first.
List() ([]*SnapshotMeta, error)
// Open takes a snapshot ID and provides a ReadCloser. Once close is
// called it is assumed the snapshot is no longer needed.
Open(id string) (*SnapshotMeta, io.ReadCloser, error)
}
// SnapshotSink is returned by StartSnapshot. The FSM will Write state
// to the sink and call Close on completion. On error, Cancel will be invoked.
type SnapshotSink interface {
io.WriteCloser
ID() string
Cancel() error
}
// runSnapshots is a long running goroutine used to manage taking
// new snapshots of the FSM. It runs in parallel to the FSM and
// main goroutines, so that snapshots do not block normal operation.
func (r *Raft) runSnapshots() {
for {
select {
case <-randomTimeout(r.conf.SnapshotInterval):
// Check if we should snapshot
if !r.shouldSnapshot() {
continue
}
// Trigger a snapshot
if _, err := r.takeSnapshot(); err != nil {
r.logger.Printf("[ERR] raft: Failed to take snapshot: %v", err)
}
case future := <-r.userSnapshotCh:
// User-triggered, run immediately
id, err := r.takeSnapshot()
if err != nil {
r.logger.Printf("[ERR] raft: Failed to take snapshot: %v", err)
} else {
future.opener = func() (*SnapshotMeta, io.ReadCloser, error) {
return r.snapshots.Open(id)
}
}
future.respond(err)
case <-r.shutdownCh:
return
}
}
}
// shouldSnapshot checks if we meet the conditions to take
// a new snapshot.
func (r *Raft) shouldSnapshot() bool {
// Check the last snapshot index
lastSnap, _ := r.getLastSnapshot()
// Check the last log index
lastIdx, err := r.logs.LastIndex()
if err != nil {
r.logger.Printf("[ERR] raft: Failed to get last log index: %v", err)
return false
}
// Compare the delta to the threshold
delta := lastIdx - lastSnap
return delta >= r.conf.SnapshotThreshold
}
// takeSnapshot is used to take a new snapshot. This must only be called from
// the snapshot thread, never the main thread. This returns the ID of the new
// snapshot, along with an error.
func (r *Raft) takeSnapshot() (string, error) {
defer metrics.MeasureSince([]string{"raft", "snapshot", "takeSnapshot"}, time.Now())
// Create a request for the FSM to perform a snapshot.
snapReq := &reqSnapshotFuture{}
snapReq.init()
// Wait for dispatch or shutdown.
select {
case r.fsmSnapshotCh <- snapReq:
case <-r.shutdownCh:
return "", ErrRaftShutdown
}
// Wait until we get a response
if err := snapReq.Error(); err != nil {
if err != ErrNothingNewToSnapshot {
err = fmt.Errorf("failed to start snapshot: %v", err)
}
return "", err
}
defer snapReq.snapshot.Release()
// Make a request for the configurations and extract the committed info.
// We have to use the future here to safely get this information since
// it is owned by the main thread.
configReq := &configurationsFuture{}
configReq.init()
select {
case r.configurationsCh <- configReq:
case <-r.shutdownCh:
return "", ErrRaftShutdown
}
if err := configReq.Error(); err != nil {
return "", err
}
committed := configReq.configurations.committed
committedIndex := configReq.configurations.committedIndex
// We don't support snapshots while there's a config change outstanding
// since the snapshot doesn't have a means to represent this state. This
// is a little weird because we need the FSM to apply an index that's
// past the configuration change, even though the FSM itself doesn't see
// the configuration changes. It should be ok in practice with normal
// application traffic flowing through the FSM. If there's none of that
// then it's not crucial that we snapshot, since there's not much going
// on Raft-wise.
if snapReq.index < committedIndex {
return "", fmt.Errorf("cannot take snapshot now, wait until the configuration entry at %v has been applied (have applied %v)",
committedIndex, snapReq.index)
}
// Create a new snapshot.
r.logger.Printf("[INFO] raft: Starting snapshot up to %d", snapReq.index)
start := time.Now()
version := getSnapshotVersion(r.protocolVersion)
sink, err := r.snapshots.Create(version, snapReq.index, snapReq.term, committed, committedIndex, r.trans)
if err != nil {
return "", fmt.Errorf("failed to create snapshot: %v", err)
}
metrics.MeasureSince([]string{"raft", "snapshot", "create"}, start)
// Try to persist the snapshot.
start = time.Now()
if err := snapReq.snapshot.Persist(sink); err != nil {
sink.Cancel()
return "", fmt.Errorf("failed to persist snapshot: %v", err)
}
metrics.MeasureSince([]string{"raft", "snapshot", "persist"}, start)
// Close and check for error.
if err := sink.Close(); err != nil {
return "", fmt.Errorf("failed to close snapshot: %v", err)
}
// Update the last stable snapshot info.
r.setLastSnapshot(snapReq.index, snapReq.term)
// Compact the logs.
if err := r.compactLogs(snapReq.index); err != nil {
return "", err
}
r.logger.Printf("[INFO] raft: Snapshot to %d complete", snapReq.index)
return sink.ID(), nil
}
// compactLogs takes the last inclusive index of a snapshot
// and trims the logs that are no longer needed.
func (r *Raft) compactLogs(snapIdx uint64) error {
defer metrics.MeasureSince([]string{"raft", "compactLogs"}, time.Now())
// Determine log ranges to compact
minLog, err := r.logs.FirstIndex()
if err != nil {
return fmt.Errorf("failed to get first log index: %v", err)
}
// Check if we have enough logs to truncate
lastLogIdx, _ := r.getLastLog()
if lastLogIdx <= r.conf.TrailingLogs {
return nil
}
// Truncate up to the end of the snapshot, or `TrailingLogs`
// back from the head, which ever is further back. This ensures
// at least `TrailingLogs` entries, but does not allow logs
// after the snapshot to be removed.
maxLog := min(snapIdx, lastLogIdx-r.conf.TrailingLogs)
// Log this
r.logger.Printf("[INFO] raft: Compacting logs from %d to %d", minLog, maxLog)
// Compact the logs
if err := r.logs.DeleteRange(minLog, maxLog); err != nil {
return fmt.Errorf("log compaction failed: %v", err)
}
return nil
}