250 lines
12 KiB
Plaintext
250 lines
12 KiB
Plaintext
---
|
|
layout: docs
|
|
page_title: Upgrading to 1.10.0
|
|
description: >-
|
|
Specific versions of Consul may have additional information about the upgrade
|
|
process beyond the standard flow.
|
|
---
|
|
|
|
# Upgrading to 1.10.0
|
|
|
|
<EnterpriseAlert />
|
|
|
|
## Introduction
|
|
|
|
This guide explains how to best upgrade a single Consul Enterprise datacenter to v1.10.0
|
|
from a version of Consul that is forward compatible with v1.10. If you are on a major
|
|
version of Consul prior to 1.8, you will need to complete and [upgrade to 1.8.13](/docs/upgrading/instructions/upgrade-to-1-8-x)
|
|
or higher before continuing with this guide. If you are already on a major version of 1.8 or 1.9, then
|
|
this guide will go over the procedures required for upgrading to v1.10. This process
|
|
will require intermediate version upgrades to a forward-compatible release of v1.8 or v1.9,
|
|
as well as other licensing related configuration changes. If you have multiple Consul datacenters,
|
|
upgrade them in the normal order and take the following instructions into account for each upgrade.
|
|
|
|
For the open source version of Consul please follow the
|
|
[General Upgrade Process](/docs/upgrading/instructions/general-process).
|
|
|
|
~> You can only upgrade to Consul Enterprise 1.10 from a version of Consul Enterprise
|
|
1.8 >= 1.8.13 or 1.9 >= 1.9.7. Other versions of Consul Enterprise are not forward
|
|
compatible with v1.10 and will cause issues during the upgrade that could result in
|
|
agents failing to start due to [changes in the way we manage licenses](/docs/enterprise/license/faq).
|
|
|
|
## Requirements
|
|
|
|
- All Consul servers, clients, and snapshot agents should be on a version of Consul >= 1.8.0 and < 1.10.0. If
|
|
they are not at the minimum version or higher, follow the [normal upgrade procedures](/docs/upgrading) to upgrade them until the version requirement is met.
|
|
|
|
## Assumptions
|
|
|
|
This guides makes the following assumptions:
|
|
|
|
- You are familiar with the [General Upgrade Process](/docs/upgrading/instructions/general-process).
|
|
- You have the ability to run Consul CLI commands.
|
|
- If ACLs are in use, then you possess a token with at least `operator:read` permissions.
|
|
|
|
## Considerations
|
|
|
|
The licensing changes outlined on the [Specific Version Details](/docs/upgrading/upgrade-specific#consul-1-10-0)
|
|
page are the main breaking changes in Consul Enterprise 1.10 that require special handling during the upgrade process.
|
|
The page also describes other changes that might cause issues during an upgrade.
|
|
You can also review the [licensing FAQ](/docs/enterprise/license/faq), which includes granular details, as well as the full
|
|
[changelog](https://github.com/hashicorp/consul/blob/main/CHANGELOG.md#1100-june-22-2021).
|
|
We strongly recommend reviewing the changes prior to upgrading.
|
|
|
|
## Procedures
|
|
|
|
~> Any steps in the following section that mention upgrading servers/clients assume that normal safe upgrade
|
|
procedures are followed. Licensing-related configuration changes are required for upgrading to 1.10.
|
|
Intermediate version upgrades are also required to ensure forward compatibility.
|
|
Refer to our documentation for the [basic server upgrade process](/docs/upgrading/instructions/general-process),
|
|
and for [autopilot assisted upgrades](https://learn.hashicorp.com/tutorials/consul/upgrade-automation)
|
|
for more information.
|
|
|
|
**1.** Retrieve the datacenter's current license by executing the following CLI command:
|
|
|
|
```shell
|
|
consul license get -signed > consul.hclic
|
|
```
|
|
|
|
Note that you can run the command from anywhere Consul is already running or from a location that has network access to the cluster.
|
|
Additional command line options for directing the request to the correct Consul API may be necessary if the command runs from another location.
|
|
|
|
This will save the license to a file in the local directory named `consul.hclic`. Having this
|
|
will be useful when preparing the license for the 1.10 upgrades later on in the process.
|
|
|
|
**2.** Take a snapshot of the cluster by running the following command:
|
|
|
|
```shell
|
|
consul snapshot save original.snap
|
|
```
|
|
|
|
Note that you can run the command from anywhere Consul is already running or from a location that has network access to the cluster.
|
|
Additional command line options for directing the request to the correct Consul API may be necessary if the command runs from another location.
|
|
|
|
Note that you will need to ensure that there is enough disk space in the current directory
|
|
to store the snapshot. In the worst case, the snapshot size could be close to the amount
|
|
of RAM the Consul server processes are consuming.
|
|
|
|
This snapshot should not be needed, but if something were to go wrong, having
|
|
the snapshot would make it possible to restore the previous state.
|
|
|
|
**3.** Determine if ACLs are enabled by running the following CLI command.
|
|
|
|
```shell
|
|
consul info | grep "acl ="
|
|
```
|
|
|
|
If you receive output like either of the following, then ACLs are enabled:
|
|
|
|
```text
|
|
Error querying agent: Unexpected response code: 403 (Permission denied)
|
|
```
|
|
|
|
```text
|
|
acl = enabled
|
|
|
|
```
|
|
|
|
Select the correct tab below based on whether ACLs are enabled or disabled or if you
|
|
are operating Consul within Kubernetes.
|
|
|
|
<Tabs>
|
|
<Tab heading="ACLs Enabled">
|
|
|
|
**4.** Upgrade all server agents to the latest 1.8.x or 1.9.x release.
|
|
|
|
**5.** Upgrade all client agents to the latest 1.8.x or 1.9.x release.
|
|
|
|
**6.** Upgrade all [snapshot agents](/docs/commands/snapshot/agent) to the latest 1.8.x or 1.9.x release.
|
|
|
|
**7.** Take a snapshot of the upgraded cluster by running the following command:
|
|
|
|
```shell
|
|
consul snapshot save intermediate.snap
|
|
```
|
|
|
|
Note that you can run the command from anywhere Consul is already running or from a location that has network access to the cluster.
|
|
If run elsewhere, [additional command line options](/docs/commands/snapshot/save#api-options) may be needed to direct the request to the right Consul API.
|
|
|
|
Note that you will need to ensure there is enough disk space in the current directory
|
|
to store the snapshot. In the worst case, the snapshot size could be close to the amount
|
|
of RAM the Consul server processes are consuming.
|
|
|
|
This snapshot should not be needed, but if something were to go wrong, having
|
|
the snapshot would make it possible to restore the previous state.
|
|
|
|
**8.** Pre-configure the server agents with a license.
|
|
|
|
This can either be set with the `license_path` configuration item, the
|
|
`CONSUL_LICENSE_PATH` environment variable, or the `CONSUL_LICENSE`
|
|
environment variable. See the [licensing documentation](/docs/enterprise/license/overview)
|
|
for more information about how to configure the license.
|
|
You can also refer to the [Apply Enterprise License](https://learn.hashicorp.com/tutorials/consul/deployment-guide#apply-enterprise-license) tutorial for additional information.
|
|
|
|
**9.** Upgrade all server agents to v1.10.0.
|
|
|
|
**10.** Upgrade all client agents to v1.10.0.
|
|
|
|
**11.** Upgrade all [snapshot agents](/docs/commands/snapshot/agent) to v1.10.0.
|
|
|
|
</Tab>
|
|
<Tab heading="ACLs Disabled">
|
|
|
|
~> We do not recommend running in production with ACLs disabled. An alternative upgrade
|
|
path involves first enabling ACLs by following [this tutorial](https://learn.hashicorp.com/tutorials/consul/access-control-setup-production)
|
|
and then proceeding with the instructions within the "ACLs Enabled" tab.
|
|
|
|
**4.** Upgrade all server agents to the latest 1.8.x or 1.9.x release.
|
|
|
|
**5.** Pre-configure the client agents with a license.
|
|
|
|
This can either be set with the `license_path` configuration item, the
|
|
`CONSUL_LICENSE_PATH` environment variable, or the `CONSUL_LICENSE`
|
|
environment variable. See the [licensing documentation](/docs/enterprise/license/overview)
|
|
for more information about how to configure the license.
|
|
You can also refer to the [Apply Enterprise License](https://learn.hashicorp.com/tutorials/consul/deployment-guide#apply-enterprise-license) tutorial for additional information.
|
|
Note that while Consul Enterprise 1.8.13 and 1.9.7 have the ability to load the license
|
|
from these configurations, it is intended to only be used during upgrades.
|
|
Licenses loaded this way are not online reloadable. It is therefore important
|
|
to promptly proceed with the upgrade and not leave agents in the intermediate state.
|
|
|
|
**6.** Upgrade all client agents to the latest 1.8.x or 1.9.x release.
|
|
|
|
**7.** Pre-configure the snapshot agents with a license. This is the same process that
|
|
was executed for the servers in step 5.
|
|
|
|
**8.** Upgrade all [snapshot agents](/docs/commands/snapshot/agent) to the latest 1.8.x or 1.9.x release.
|
|
|
|
**9.** Take a snapshot of the upgraded cluster by running the following command:
|
|
|
|
```shell
|
|
consul snapshot save intermediate.snap
|
|
```
|
|
|
|
Note that you can run the command from anywhere Consul is already running or from a location that has network access to the cluster.
|
|
Additional command line options for directing the request to the correct Consul API may be necessary if the command runs from another location.
|
|
|
|
Note that you will need to ensure there is enough disk space in the current directory
|
|
to store the snapshot. In the worst case, the snapshot size could be close to the amount
|
|
of RAM the Consul server processes are consuming.
|
|
|
|
This snapshot should not be needed but if something were to go wrong, having
|
|
the snapshot would make it possible to restore the previous state.
|
|
|
|
**10.** Pre-configure the server agents with a license. This is the same process that
|
|
was executed for the servers in step 5.
|
|
|
|
**11.** Upgrade all server agents to v1.10.0.
|
|
|
|
**12.** Upgrade all client agents to v1.10.0.
|
|
|
|
**13.** Upgrade all [snapshot agents](/docs/commands/snapshot/agent) to v1.10.0.
|
|
|
|
</Tab>
|
|
<Tab heading="Kubernetes">
|
|
|
|
**4.** **If** the Consul servers are running outside the Kubernetes cluster, ensure they are upgraded
|
|
to the latest 1.8.x or 1.9.x before the next steps. Otherwise, this step can be skipped.
|
|
|
|
**5.** Upgrade to the latest Consul helm chart v0.32.0+.
|
|
|
|
**6.** Update the value of `global.image` in the values file to the latest 1.8.x or 1.9.x image.
|
|
|
|
Additionally, ensure that the Kubernetes secret with the license is specified in the
|
|
values `server.enterpriseLicense.secretName` and `server.enterpriseLicense.secretKey`.
|
|
|
|
**7.** Upgrade the cluster.
|
|
|
|
Follow the steps in the [Kubernetes Upgrade Guide](/docs/k8s/upgrade#upgrade-consul-on-kubernetes)
|
|
to upgrade the cluster. Ensure you check the steps to upgrade the [servers](/docs/k8s/upgrade#upgrading-consul-servers)
|
|
and the [clients](/docs/k8s/upgrade#upgrading-consul-clients).
|
|
|
|
**8.** **If** the Consul servers are running outside the Kubernetes cluster, ensure they are upgraded
|
|
to 1.10.0 before the next steps. Otherwise, this step can be skipped.
|
|
|
|
This will require pre-configuring the servers with a license
|
|
before running 1.10. This can either be set with the `license_path` configuration item, the
|
|
`CONSUL_LICENSE_PATH` environment variable or the `CONSUL_LICENSE`
|
|
environment variable. See the [licensing documentation](/docs/enterprise/license/overview)
|
|
for more information about how to configure the license.
|
|
You can also refer to the [Apply Enterprise License](https://learn.hashicorp.com/tutorials/consul/deployment-guide#apply-enterprise-license) tutorial for additional information.
|
|
Note that while Consul Enterprise 1.8.13 and 1.9.7 have the ability to load the license
|
|
from these configurations, it is intended to only be used during upgrades.
|
|
Licenses loaded this way are not online reloadable. It is therefore important
|
|
to promptly proceed with the upgrade and not leave agents in the intermediate state.
|
|
|
|
**9.** Update the value of `global.image` in the values file to the 1.10.0 image.
|
|
|
|
**10.** Upgrade the cluster.
|
|
|
|
Follow the steps in the [Kubernetes Upgrade Guide](/docs/k8s/upgrade#upgrade-consul-on-kubernetes)
|
|
to then upgrade the cluster. Ensure you check the steps to upgrade the [servers](/docs/k8s/upgrade#upgrading-consul-servers)
|
|
and the [clients](/docs/k8s/upgrade#upgrading-consul-clients).
|
|
|
|
</Tab>
|
|
</Tabs>
|
|
|
|
## Post-Upgrade Configuration Changes
|
|
|
|
No configuration changes are required for this upgrade.
|