open-consul/website/content/docs/connect/registration/service-registration.mdx

501 lines
17 KiB
Plaintext

---
layout: docs
page_title: Connect - Service Registration
description: >-
A per-service proxy sidecar transparently handles inbound and outbound service
connections. You can register these sidecars with sane defaults by nesting
their definitions in the service definition.
---
# Proxy Service Registration
To function as a Connect proxy, proxies must be declared as a proxy types in
their service definitions, and provide information about the service they
represent.
To declare a service as a proxy, the service definition must contain
the following fields:
- `kind` `(string)` must be set to `connect-proxy`. This declares that the
service is a proxy type.
- `proxy.destination_service_name` `(string)` must be set to the service that
this proxy is representing. Note that this replaces `proxy_destination` in
versions 1.2.0 to 1.3.0.
~> **Deprecation Notice:** From version 1.2.0 to 1.3.0, proxy destination was
specified using `proxy_destination` at the top level. This will continue to work
until at least 1.5.0 but it's highly recommended to switch to using
`proxy.destination_service_name`.
- `port` `(int)` must be set so that other Connect services can discover the
exact address for connections. `address` is optional if the service is being
registered against an agent, since it'll inherit the node address.
Minimal Example:
```json
{
"name": "redis-proxy",
"kind": "connect-proxy",
"proxy": {
"destination_service_name": "redis"
},
"port": 8181
}
```
With this service registered, any Connect clients searching for a
Connect-capable endpoint for "redis" will find this proxy.
### Sidecar Proxy Fields
Most Connect proxies are deployed as "sidecars" which means they are co-located
with a single service instance which they represent and proxy all inbound
traffic to. In this case the following fields should also be set if you are deploying your proxy as a sidecar but defining it in its own service registration:
- `proxy.destination_service_id` `(string: <required>)` is set to the _id_
(and not the _name_ if they are different) of the specific service instance
that is being proxied. The proxied service is assumed to be registered on
the same agent although it's not strictly validated to allow for
un-coordinated registrations.
- `proxy.local_service_port` `(int: <required>)` must specify the port the
proxy should use to connect to the _local_ service instance.
- `proxy.local_service_address` `(string: "")` can be set to override the IP or
hostname the proxy should use to connect to the _local_ service. Defaults to
`127.0.0.1`.
### Complete Configuration Example
The following is a complete example showing all the options available when
registering a proxy instance.
```json
{
"name": "redis-proxy",
"kind": "connect-proxy",
"proxy": {
"destination_service_name": "redis",
"destination_service_id": "redis1",
"local_service_address": "127.0.0.1",
"local_service_port": 9090,
"local_service_socket_path": "/tmp/redis.sock",
"mode": "transparent",
"transparent_proxy": {},
"config": {},
"upstreams": [],
"mesh_gateway": {},
"expose": {}
},
"port": 8181
}
```
#### Proxy Parameters
- `destination_service_name` `(string: <required>)` - Specifies the _name_ of the
service this instance is proxying. Both side-car and centralized
load-balancing proxies must specify this. It is used during service
discovery to find the correct proxy instances to route to for a given service
name.
- `destination_service_id` `(string: "")` - Specifies the _ID_ of a single
specific service instance that this proxy is representing. This is only valid
for side-car style proxies that run on the same node. It is assumed that the
service instance is registered via the same Consul agent so the ID is unique
and has no node qualifier. This is useful to show in tooling which proxy
instance is a side-car for which application instance and will enable
fine-grained analysis of the metrics coming from the proxy.
- `local_service_address` `(string: "")` - Specifies the address a side-car
proxy should attempt to connect to the local application instance on.
Defaults to 127.0.0.1.
- `local_service_port` `(int: <optional>)` - Specifies the port a side-car
proxy should attempt to connect to the local application instance on.
Defaults to the port advertised by the service instance identified by
`destination_service_id` if it exists otherwise it may be empty in responses.
- `local_service_socket_path` - The path of a Unix domain socket to connect to the local application
instance. This is created by the application. This conflicts with `local_service_address`
and `local_service_port`. This is only supported when using Envoy for the proxy.
- `mode` `(string: "")` - One of \`direct\` or \`transparent\`. Added in v1.10.0.
- `"transparent"` - represents that inbound and outbound application traffic is being
captured and redirected through the proxy. This mode does not enable the traffic redirection
itself. Instead it signals Consul to configure Envoy as if traffic is already being redirected.
- `"direct"` - represents that the proxy's listeners must be dialed directly by the local
application and other proxies.
- `""` - Default mode. The default mode will be `"direct"` if no other configuration
applies. The order of precedence for setting the mode is
1. Proxy Service's `Proxy` configuration
2. The `service-defaults` configuration for the service.
3. The `global` `proxy-defaults`.
- `transparent_proxy` `(object: {})` - Specifies the configuration specific to proxies in `transparent` mode.
The format is defined in the [Transparent Proxy Configuration Reference](#transparent-proxy-configuration-reference).
Added in v1.10.0.
- `config` `(object: {})` - Specifies opaque config JSON that will be
stored and returned along with the service instance from future API calls.
- `upstreams` `(array<Upstream>: [])` - Specifies the upstream services
this proxy should create listeners for. The format is defined in
[Upstream Configuration Reference](#upstream-configuration-reference).
- `mesh_gateway` `(object: {})` - Specifies the mesh gateway configuration
for this proxy. The format is defined in the [Mesh Gateway Configuration Reference](#mesh-gateway-configuration-reference).
- `expose` `(object: {})` - Specifies the configuration to expose HTTP paths through this proxy.
The format is defined in the [Expose Paths Configuration Reference](#expose-paths-configuration-reference),
and is only compatible with an Envoy proxy.
### Upstream Configuration Reference
The following examples show all possible upstream configuration parameters.
-> Note that `snake_case` is used here as it works in both [config file and API
registrations](/docs/agent/services#service-definition-parameter-case).
Upstreams support multiple destination types. Both examples are shown below
followed by documentation for each attribute.
#### Service Destination
```json
{
"destination_type": "service",
"destination_name": "redis",
"datacenter": "dc1",
"local_bind_address": "127.0.0.1",
"local_bind_port": 1234,
"local_bind_socket_path": "/tmp/redis_5678.sock",
"local_bind_socket_mode": "0700",
"config": {},
"mesh_gateway": {
"mode": "local"
}
},
```
#### Prepared Query Destination
```json
{
"destination_type": "prepared_query",
"destination_name": "database",
"local_bind_address": "127.0.0.1",
"local_bind_port": 1234,
"config": {}
},
```
- `destination_name` `(string: <required>)` - Specifies the name of the service
or prepared query to route connect to. The prepared query should be the name
or the ID of the prepared query.
- `destination_namespace` `(string: "")` - <EnterpriseAlert inline />
Specifies the namespace of the upstream service.
- `local_bind_port` `(int: <required>)` - Specifies the port to bind a local
listener to for the application to make outbound connections to this upstream.
- `local_bind_address` `(string: "")` - Specifies the address to bind a
local listener to for the application to make outbound connections to this
upstream. Defaults to `127.0.0.1`.
- `local_bind_socket_path` `(string: "")` - Specifies the path at which to bind a Unix
domain socket listener for the application to make outbound connections to
this upstream. This conflicts with specifying the local_bind_port
or local_bind_address. This is only supported when using Envoy as a proxy.
- `local_bind_socket_mode` `(string: "")` - Specifies the (optional) Unix octal
file permissions to use for the socket.
- `destination_type` `(string: "")` - Specifies the type of discovery
query to use to find an instance to connect to. Valid values are `service` or
`prepared_query`. Defaults to `service`.
- `datacenter` `(string: "")` - Specifies the datacenter to issue the
discovery query to. Defaults to the local datacenter.
- `config` `(object: {})` - Specifies opaque configuration options that
will be provided to the proxy instance for this specific upstream. Can contain
any valid JSON object. This might be used to configure proxy-specific features
like timeouts or retries for the given upstream. See the [built-in proxy
configuration
reference](/docs/connect/proxies/built-in#proxy-upstream-config-key-reference) for
options available when using the built-in proxy. If using Envoy as a proxy,
see [Envoy configuration
reference](/docs/connect/proxies/envoy#proxy-upstream-config-options)
- `mesh_gateway` `(object: {})` - Specifies the mesh gateway configuration
for this proxy. The format is defined in the [Mesh Gateway Configuration Reference](#mesh-gateway-configuration-reference).
### Transparent Proxy Configuration Reference
The following examples show additional configuration for transparent proxies.
Added in v1.10.0.
-> Note that `snake_case` is used here as it works in both [config file and API
registrations](/docs/agent/services#service-definition-parameter-case).
#### Configure a proxy listener for outbound traffic on port 22500
```json
{
"outbound_listener_port": 22500,
"dialed_directly": true
}
```
- `outbound_listener_port` `(int: 15001)` - The port the proxy should listen on for outbound traffic.
This must be the port where outbound application traffic is captured and redirected to.
- `dialed_directly` `(bool: false)` - Determines whether this proxy instance's IP address can be dialed
directly by transparent proxies. Typically transparent proxies dial upstreams using the "virtual"
tagged address, which load balances across instances. Dialing individual instances can be helpful
in cases like stateful services such as a database cluster with a leader.
~> **Note:** Dynamic routing rules such as failovers and redirects do not apply to services dialed directly.
Additionally, the connection is proxied using a TCP proxy with a connection timeout of 5 seconds.
### Mesh Gateway Configuration Reference
The following examples show all possible mesh gateway configurations.
-> Note that `snake_case` is used here as it works in both [config file and API
registrations](/docs/agent/services#service-definition-parameter-case).
#### Using a Local/Egress Gateway in the Local Datacenter
```json
{
"mode": "local"
}
```
#### Direct to a Remote/Ingress in a Remote Datacenter
```json
{
"mode": "remote"
}
```
#### Prevent Using a Mesh Gateway
```json
{
"mode": "none"
}
```
#### Default Mesh Gateway Mode
```json
{
"mode": ""
}
```
- `mode` `(string: "")` - This defines the mode of operation for how
upstreams with a remote destination datacenter get resolved.
- `"local"` - Mesh gateway services in the local datacenter will be used
as the next-hop destination for the upstream connection.
- `"remote"` - Mesh gateway services in the remote/target datacenter will
be used as the next-hop destination for the upstream connection.
- `"none"` - No mesh gateway services will be used and the next-hop destination
for the connection will be directly to the final service(s).
- `""` - Default mode. The default mode will be `"none"` if no other configuration
enables them. The order of precedence for setting the mode is
1. Upstream
2. Proxy Service's `Proxy` configuration
3. The `service-defaults` configuration for the service.
4. The `global` `proxy-defaults`.
### Expose Paths Configuration Reference
The following examples show possible configurations to expose HTTP paths through Envoy.
Exposing paths through Envoy enables a service to protect itself by only listening on localhost, while still allowing
non-Connect-enabled applications to contact an HTTP endpoint.
Some examples include: exposing a `/metrics` path for Prometheus or `/healthz` for kubelet liveness checks.
-> Note that `snake_case` is used here as it works in both [config file and API
registrations](/docs/agent/services#service-definition-parameter-case).
#### Expose listeners in Envoy for HTTP and GRPC checks registered with the local Consul agent
```json
{
"expose": {
"checks": true
}
}
```
#### Expose an HTTP listener in Envoy at port 21500 that routes to an HTTP server listening at port 8080
```json
{
"expose": {
"paths": [
{
"path": "/healthz",
"local_path_port": 8080,
"listener_port": 21500
}
]
}
}
```
#### Expose an HTTP2 listener in Envoy at port 21501 that routes to a gRPC server listening at port 9090
```json
{
"expose": {
"paths": [
{
"path": "/grpc.health.v1.Health/Check",
"protocol": "http2",
"local_path_port": 9090,
"listener_port": 21501
}
]
}
}
```
- `checks` `(bool: false)` - If enabled, all HTTP and gRPC checks registered with the agent are exposed through Envoy.
Envoy will expose listeners for these checks and will only accept connections originating from localhost or Consul's
[advertise address](/docs/agent/options#advertise). The port for these listeners are dynamically allocated from
[expose_min_port](/docs/agent/options#expose_min_port) to [expose_max_port](/docs/agent/options#expose_max_port).
This flag is useful when a Consul client cannot reach registered services over localhost. One example is when running
Consul on Kubernetes, and Consul agents run in their own pods.
- `paths` `array<Path>: []` - A list of paths to expose through Envoy.
- `path` `(string: "")` - The HTTP path to expose. The path must be prefixed by a slash. ie: `/metrics`.
- `local_path_port` `(int: 0)` - The port where the local service is listening for connections to the path.
- `listener_port` `(int: 0)` - The port where the proxy will listen for connections. This port must be available for
the listener to be set up. If the port is not free then Envoy will not expose a listener for the path,
but the proxy registration will not fail.
- `protocol` `(string: "http")` - Sets the protocol of the listener. One of `http` or `http2`. For gRPC use `http2`.
### Unix Domain Sockets
The following examples show additional configuration for Unix domain sockets.
Added in v1.10.0.
To connect to a service via local Unix Domain Socket instead of a
port, add `local_bind_socket_path` and optionally `local_bind_socket_mode`
to the upstream config for a service:
<Tabs>
<Tab heading="HCL">
```hcl
upstreams = [
{
destination_name = "service-1"
local_bind_socket_path = "/tmp/socket_service_1"
local_bind_socket_mode = "0700"
}
]
```
</Tab>
<Tab heading="JSON">
```json
"upstreams": [
{
"destination_name": "service-1",
"local_bind_socket_path": "/tmp/socket_service_1",
"local_bind_socket_mode": "0700"
}
]
```
</Tab>
</Tabs>
This will cause Envoy to create a socket with the path and mode
provided, and connect that to service-1.
The mode field is optional, and if omitted will use the default mode
for Envoy. This is not applicable for abstract sockets. See the
[Envoy documentation](https://www.envoyproxy.io/docs/envoy/latest/api-v3/config/core/v3/address.proto#envoy-v3-api-msg-config-core-v3-pipe)
for details.
-> These options conflict with the `local_bind_socket_port` and
`local_bind_socket_address` options. For a given upstream the proxy can bind either to an IP port or
a Unix socket, but not both.
Similarly to expose a service listening on a Unix Domain socket to the service
mesh, use either the `socket_path` field in the service definition or the
`local_service_socket_path` field in the proxy definition. These
fields are analogous to the `port` and `service_port` fields in their
respective locations.
<Tabs>
<Tab heading="HCL">
```hcl
services {
name = "service-2"
socket_path = "/tmp/socket_service_2"
}
```
</Tab>
<Tab heading="JSON">
```json
"services": {
"name": "service-2",
"socket_path": "/tmp/socket_service_2"
}
```
</Tab>
</Tabs>
Or in the proxy definition:
<Tabs>
<Tab heading="HCL">
```hcl
services {
name = "socket_service_2"
connect {
sidecar_service {
proxy {
name = "service-2"
local_service_socket_path = "/tmp/socket_service_2"
...
}
}
}
}
```
</Tab>
<Tab heading="JSON">
```json
"services": {
"name": "socket_service_2",
"connect": {
"sidecar_service": {
"proxy": {
"name": "service-2",
"local_service_socket_path": "/tmp/socket_service_2"
...
}
}
}
}
```
</Tab>
</Tabs>
There is no mode field since the service is expected to create the
socket it is listening on, not the Envoy proxy.
Again, the `socket_path` and `local_service_socket_path` fields conflict
with `address`/`port` and `local_service_address`/`local_service_port`
configuration options.