---
layout: docs
page_title: Federation Between VMs and Kubernetes
sidebar_title: Federation Between VMs and Kubernetes
description: >-
  Federating Kubernetes clusters and VMs.
---

# Federation Between VMs and Kubernetes

-> **1.8.0+:** This feature is available in Consul versions 1.8.0 and higher

~> This topic requires familiarity with [Mesh Gateways](/docs/connect/mesh-gateway) and [WAN Federation Via Mesh Gateways](/docs/connect/gateways/wan-federation-via-mesh-gateways).

Consul datacenters running on non-kubernetes platforms like VMs or bare metal can
be federated with Kubernetes datacenters. Just like with Kubernetes, one datacenter
must be the [primary](/docs/k8s/installation/multi-cluster/kubernetes#primary-datacenter).

## Kubernetes as the Primary

If your primary datacenter is running on Kubernetes, use the Helm config from the
[Primary Datacenter](/docs/k8s/installation/multi-cluster/kubernetes#primary-datacenter) section to install Consul.

Once installed, and with the `ProxyDefaults` [resource created](/docs/k8s/installation/multi-cluster/kubernetes#proxydefaults),
you'll need to export the following information from the primary Kubernetes cluster:

* The certificate authority cert:

  ```sh
  kubectl get secrets/consul-ca-cert --template='{{index .data "tls.crt" }}' |
    base64 -D > consul-agent-ca.pem
  ```

* The certificate authority signing key:

  ```sh
  kubectl get secrets/consul-ca-key --template='{{index .data "tls.key" }}' |
     base64 -D > consul-agent-ca-key.pem
  ```

With the `consul-agent-ca.pem` and `consul-agent-ca-key.pem` files you can
create certificates for your servers and clients running on VMs that share the
same certificate authority as your Kubernetes servers.

You can use the `consul tls` commands to generate those certificates:

  ```sh
  # NOTE: consul-agent-ca.pem and consul-agent-ca-key.pem must be in the current
  # directory.
  $ consul tls cert create -server -dc=vm-dc -node <node_name>
  ==> WARNING: Server Certificates grants authority to become a
      server and access all state in the cluster including root keys
      and all ACL tokens. Do not distribute them to production hosts
      that are not server nodes. Store them as securely as CA keys.
  ==> Using consul-agent-ca.pem and consul-agent-ca-key.pem
  ==> Saved vm-dc-server-consul-0.pem
  ==> Saved vm-dc-server-consul-0-key.pem
  ```

-> Note the `-node` option in the above command. This should be same as the node name of the [Consul Agent](https://www.consul.io/docs/agent#running-an-agent).  This is a [requirement](https://www.consul.io/docs/connect/gateways/mesh-gateway/wan-federation-via-mesh-gateways#tls) for Consul Federation to work. Alternatively, if you plan to use the same certificate and key pair on all your Consul server nodes, or you don't know the nodename in advance, use `-node "*"` instead. 

See the help for output of `consul tls cert create -h` to see more options
for generating server certificates.

These certificates can be used in your server config file:

```hcl
# server.hcl
cert_file = "vm-dc-server-consul-0.pem"
key_file = "vm-dc-server-consul-0-key.pem"
ca_file = "consul-agent-ca.pem"
```

For clients, you can generate TLS certs with:

```shell-session
$ consul tls cert create -client
==> Using consul-agent-ca.pem and consul-agent-ca-key.pem
==> Saved dc1-client-consul-0.pem
==> Saved dc1-client-consul-0-key.pem
```

Or use the [auto_encrypt](/docs/agent/options#auto_encrypt) feature.

1. The WAN addresses of the mesh gateways:

```shell-session
$ kubectl exec statefulset/consul-server -- sh -c \
  'curl -sk https://localhost:8501/v1/catalog/service/mesh-gateway | jq ".[].ServiceTaggedAddresses.wan"'
{
  "Address": "1.2.3.4",
  "Port": 443
}
{
  "Address": "1.2.3.4",
  "Port": 443
}
```

In this example, the addresses are the same because both mesh gateway pods are
fronted by the same Kubernetes load balancer.

These addresses will be used in the server config for the `primary_gateways`
setting:

```hcl
primary_gateways = ["1.2.3.4:443"]
```

1. If ACLs are enabled, you'll also need the replication ACL token:

```shell-session
$ kubectl get secrets/consul-acl-replication-acl-token --template='{{.data.token}}'
e7924dd1-dc3f-f644-da54-81a73ba0a178
```

This token will be used in the server config for the replication token.
You must also create your own agent policy and token.

```hcl
acls {
  tokens {
    agent = "<your agent token>"
    replication = "e7924dd1-dc3f-f644-da54-81a73ba0a178"
  }
}
```

1. If gossip encryption is enabled, you'll need the key as well. The command
   to retrieve the key will depend on which Kubernetes secret you've stored it in.

   This key will be used in server and client configs for the `encrypt` setting:

   ```hcl
   encrypt = "uF+GsbI66cuWU21kiXLze5JLEX5j4iDFlDTb0ZWNpDI="
   ```

A final example server config file might look like:

```hcl
# From above
cert_file = "vm-dc-server-consul-0.pem"
key_file = "vm-dc-server-consul-0-key.pem"
ca_file = "consul-agent-ca.pem"
primary_gateways = ["1.2.3.4:443"]
acl {
  enabled = true
  default_policy = "deny"
  down_policy = "extend-cache"
  tokens {
    agent = "e7924dd1-dc3f-f644-da54-81a73ba0a178"
    replication = "e7924dd1-dc3f-f644-da54-81a73ba0a178"
  }
}
encrypt = "uF+GsbI66cuWU21kiXLze5JLEX5j4iDFlDTb0ZWNpDI="

# Other server settings
server = true
datacenter = "vm-dc"
data_dir = "/opt/consul"
enable_central_service_config = true
primary_datacenter = "dc1"
connect {
  enabled = true
  enable_mesh_gateway_wan_federation = true
}
verify_incoming_rpc = true
verify_outgoing = true
verify_server_hostname = true
ports {
  https = 8501
  http = -1
  grpc = 8502
}
```

## Kubernetes as the Secondary

If you're running your primary datacenter on VMs then you'll need to manually
construct the [Federation Secret](/docs/k8s/installation/multi-cluster/kubernetes#federation-secret) in order to federate
Kubernetes clusters as secondaries.

-> Your VM cluster must be running mesh gateways, and have mesh gateway WAN
federation enabled. See [WAN Federation via Mesh Gateways](/docs/connect/gateways/wan-federation-via-mesh-gateways).

You'll need:

1. The root certificate authority cert placed in `consul-agent-ca.pem`.
1. The root certificate authority key placed in `consul-agent-ca-key.pem`.
1. The IP addresses of the mesh gateways running in your VM datacenter. These must
   be routable from the Kubernetes cluster.
1. If ACLs are enabled you must create an ACL replication token with the following rules:

```hcl
acl = "write"
operator = "write"
agent_prefix "" {
  policy = "read"
}
node_prefix "" {
  policy = "write"
}
service_prefix "" {
  policy = "read"
  intentions = "read"
}
```

This token is used for ACL replication and for automatic ACL management in Kubernetes.

If you're running Consul Enterprise you'll need the rules:

```hcl
acl = "write"
operator = "write"
agent_prefix "" {
  policy = "read"
}
node_prefix "" {
  policy = "write"
}
namespace_prefix "" {
  service_prefix "" {
    policy = "read"
    intentions = "read"
  }
}
```

1. If gossip encryption is enabled, you'll need the key.

With that data ready, you can create the Kubernetes federation secret:

```sh
kubectl create secret generic consul-federation \
    --from-literal=caCert=$(cat consul-agent-ca.pem) \
    --from-literal=caKey=$(cat consul-agent-ca-key.pem)
    # If ACLs are enabled uncomment.
    # --from-literal=replicationToken="<your acl replication token>" \
    # If using gossip encryption uncomment.
    # --from-literal=gossipEncryptionKey="<your gossip encryption key>"
```

Then use the following Helm config file:

```yaml
global:
  name: consul
  datacenter: dc2
  tls:
    enabled: true
    caCert:
      secretName: consul-federation
      secretKey: caCert
    caKey:
      secretName: consul-federation
      secretKey: caKey

  # Delete this acls section if ACLs are disabled.
  acls:
    manageSystemACLs: true
    replicationToken:
      secretName: consul-federation
      secretKey: replicationToken

  federation:
    enabled: true

  # Delete this gossipEncryption section if gossip encryption is disabled.
  gossipEncryption:
    secretName: consul-federation
    secretKey: gossipEncryptionKey

connectInject:
  enabled: true
controller:
  enabled: true
meshGateway:
  enabled: true
server:
  extraConfig: |
    {
      "primary_datacenter": "<your VM datacenter name>",
      "primary_gateways": ["<ip of your VM mesh gateway>", "<other ip>", ...]
    }
```

-> **NOTE: ** You must fill out the `server.extraConfig` section with the datacenter
name of your primary datacenter running on VMs and with the IPs of your mesh
gateways running on VMs.

With your config file ready to go, follow our [Installation Guide](/docs/k8s/installation/install)
to install Consul on your secondary cluster(s).

## Next Steps

After installation, if you're using consul-helm 0.30.0+, [create the
`ProxyDefaults` resource](/docs/k8s/installation/multi-cluster/kubernetes#proxydefaults)
to allow traffic between datacenters.

Follow the [Verifying Federation](/docs/k8s/installation/multi-cluster/kubernetes#verifying-federation)
section to verify that federation is working as expected.