--- layout: "docs" page_title: "ACL System (Legacy Mode)" sidebar_current: "docs-acl-legacy" description: |- Consul provides an optional Access Control List (ACL) system which can be used to control access to data and APIs. The ACL system is a Capability-based system that relies on tokens which can have fine grained rules applied to them. It is very similar to AWS IAM in many ways. --- -> **1.3.0 and earlier:** This document only applies in Consul versions 1.3.0 and before. If you are using version 1.4.0 or later please use the updated documentation [here](/docs/acl/acl-system.html) # ACL System in Legacy Mode ~> **Alert: Deprecation Notice** The ACL system described here was Consul's original ACL implementation. In Consul 1.4.0 the ACL system was rewritten and the legacy system was deprecated. The new ACL system information can be found [here](/docs/acl/acl-system.html). The legacy documentation has two sections. - The [New ACL System Differences](#new-acl-system-differences) section details the differences between ACLs in Consul 1.4.0 and older versions. You should read this section before upgrading to Consul 1.4.0 and [migrating](/docs/acl/acl-migrate-tokens.html)tokens. - The [Legacy ACL System documentation](#legacy-acl-system) section details the ACL system in Consul 1.3.0 and older. # New ACL System Differences The [ACL System documentation](/docs/acl/acl-system.html) and [legacy ACL documentation](/docs/acl/acl-legacy.html) describes the new and old systems in detail. Below is a summary of the changes that need to be considered when migrating legacy tokens to the new system. ### Token and Policy Separation You can use a single policy in the new system for all tokens that share access rules. For example, all tokens created using the clone endpoint in the legacy system can be represented with a single policy and a set of tokens that map to that policy. ### Rule Syntax Changes The most significant change is that rules with selectors _no longer prefix match by default_. In the legacy system the following rules would grant access to nodes, services and keys _prefixed_ with foo. ```hcl node "foo" { policy = "write" } service "foo" { policy = "write" } key "foo" { policy = "write" } ``` In the new system the same syntax will only perform _exact_ match on the whole node name, service name or key. In general, exact match is what most operators intended most of the time so the same policy can be kept, however if you rely on prefix match behavior then using the same syntax will break behavior. Prefix matching can be expressed in the new ACL system explicitly, making the following rules in the new system exactly the same as the rules above in the old. ```hcl node_prefix "foo" { policy = "write" } service_prefix "foo" { policy = "write" } key_prefix "foo" { policy = "write" } ``` ### API Separation The "old" API endpoints below continue to work for backwards compatibility but will continue to create or show only "legacy" tokens that can't take full advantage of the new ACL system improvements. They are documented fully under [Legacy Tokens](/api/acl/legacy.html). - [`PUT /acl/create` - Create Legacy Token](/api/acl/legacy.html#create-acl-token) - [`PUT /acl/update` - Update Legacy Token](/api/acl/legacy.html#update-acl-token) - [`PUT /acl/destroy/:uuid` - Delete Legacy Token](/api/acl/legacy.html#delete-acl-token) - [`GET /acl/info/:uuid` - Read Legacy Token](/api/acl/legacy.html#read-acl-token) - [`PUT /acl/clone/:uuid` - Clone Legacy Token](/api/acl/legacy.html#clone-acl-token) - [`GET /acl/list` - List Legacy Tokens](/api/acl/legacy.html#list-acls) The new ACL system includes new API endpoints to manage the [ACL System](/api/acl/acl.html), [Tokens](/api/acl/tokens.html) and [Policies](/api/acl/policies.html). # Legacy ACL System ~> **Warning**: In this document we use the deprecated configuration parameter `acl_datacenter`. In Consul 1.4 and newer the parameter has been updated to [`primary_datacenter`](https://www.consul.io/docs/agent/options.html#primary_datacenter). Consul provides an optional Access Control List (ACL) system which can be used to control access to data and APIs. The ACL is [Capability-based](https://en.wikipedia.org/wiki/Capability-based_security), relying on tokens to which fine grained rules can be applied. It is very similar to [AWS IAM](http://aws.amazon.com/iam/) in many ways. ## ACL System Overview The ACL system is designed to be easy to use, fast to enforce, and flexible to new policies, all while providing administrative insight. #### ACL Tokens The ACL system is based on tokens, which are managed by Consul operators via Consul's [ACL API](/api/acl/acl.html), or systems like [HashiCorp's Vault](https://www.vaultproject.io/docs/secrets/consul/index.html). Every token has an ID, name, type, and rule set. The ID is a randomly generated UUID, making it infeasible to guess. The name is opaque to Consul and human readable. The type is either "client" (meaning the token cannot modify ACL rules) or "management" (meaning the token is allowed to perform all actions). The token ID is passed along with each RPC request to the servers. Consul's [HTTP endpoints](/api/index.html) can accept tokens via the `token` query string parameter, or the `X-Consul-Token` request header, or Authorization Bearer token [RFC6750](https://tools.ietf.org/html/rfc6750). Consul's [CLI commands](/docs/commands/index.html) can accept tokens via the `token` argument, or the `CONSUL_HTTP_TOKEN` environment variable. If no token is provided, the rules associated with a special, configurable anonymous token are automatically applied. The anonymous token is managed using the [ACL API](/api/acl/acl.html) like any other ACL token, but using `anonymous` for the ID. #### ACL Rules and Scope Tokens are bound to a set of rules that control which Consul resources the token has access to. Policies can be defined in either a whitelist or blacklist mode depending on the configuration of [`acl_default_policy`](/docs/agent/options.html#acl_default_policy). If the default policy is to "deny" all actions, then token rules can be set to whitelist specific actions. In the inverse, the "allow" all default behavior is a blacklist where rules are used to prohibit actions. By default, Consul will allow all actions. The following table summarizes the ACL policies that are available for constructing rules: | Policy | Scope | | ------------------------ | ----- | | [`agent`](#agent-rules) | Utility operations in the [Agent API](/api/agent.html), other than service and check registration | | [`event`](#event-rules) | Listing and firing events in the [Event API](/api/event.html) | | [`key`](#key-value-rules) | Key/value store operations in the [KV Store API](/api/kv.html) | | [`keyring`](#keyring-rules) | Keyring operations in the [Keyring API](/api/operator/keyring.html) | | [`node`](#node-rules) | Node-level catalog operations in the [Catalog API](/api/catalog.html), [Health API](/api/health.html), [Prepared Query API](/api/query.html), [Network Coordinate API](/api/coordinate.html), and [Agent API](/api/agent.html) | | [`operator`](#operator-rules) | Cluster-level operations in the [Operator API](/api/operator.html), other than the [Keyring API](/api/operator/keyring.html) | | [`query`](#prepared-query-rules) | Prepared query operations in the [Prepared Query API](/api/query.html) | [`service`](#service-rules) | Service-level catalog operations in the [Catalog API](/api/catalog.html), [Health API](/api/health.html), [Prepared Query API](/api/query.html), and [Agent API](/api/agent.html) | | [`session`](#session-rules) | Session operations in the [Session API](/api/session.html) | Since Consul snapshots actually contain ACL tokens, the [Snapshot API](/api/snapshot.html) requires a management token for snapshot operations and does not use a special policy. The following resources are not covered by ACL policies: 1. The [Status API](/api/status.html) is used by servers when bootstrapping and exposes basic IP and port information about the servers, and does not allow modification of any state. 2. The datacenter listing operation of the [Catalog API](/api/catalog.html#list-datacenters) similarly exposes the names of known Consul datacenters, and does not allow modification of any state. Constructing rules from these policies is covered in detail in the [Rule Specification](#rule-specification) section below. #### ACL Datacenter All nodes (clients and servers) must be configured with a [`acl_datacenter`](/docs/agent/options.html#acl_datacenter) which enables ACL enforcement but also specifies the authoritative datacenter. Consul relies on [RPC forwarding](/docs/internals/architecture.html) to support multi-datacenter configurations. However, because requests can be made across datacenter boundaries, ACL tokens must be valid globally. To avoid consistency issues, a single datacenter is considered authoritative and stores the canonical set of tokens. When a request is made to an agent in a non-authoritative datacenter, it must be resolved into the appropriate policy. This is done by reading the token from the authoritative server and caching the result for a configurable [`acl_ttl`](/docs/agent/options.html#acl_ttl). The implication of caching is that the cache TTL is an upper bound on the staleness of policy that is enforced. It is possible to set a zero TTL, but this has adverse performance impacts, as every request requires refreshing the policy via an RPC call. During an outage of the ACL datacenter, or loss of connectivity, the cache will be used as long as the TTL is valid, or the cache may be extended if the [`acl_down_policy`](/docs/agent/options.html#acl_down_policy) is set accordingly. This configuration also allows the ACL system to fail open or closed. [ACL replication](#replication) is also available to allow for the full set of ACL tokens to be replicated for use during an outage. ## Configuring ACLs ACLs are configured using several different configuration options. These are marked as to whether they are set on servers, clients, or both. | Configuration Option | Servers | Clients | Purpose | | -------------------- | ------- | ------- | ------- | | [`acl_datacenter`](/docs/agent/options.html#acl_datacenter) | `REQUIRED` | `REQUIRED` | Master control that enables ACLs by defining the authoritative Consul datacenter for ACLs | | [`acl_default_policy`](/docs/agent/options.html#acl_default_policy_legacy) | `OPTIONAL` | `N/A` | Determines whitelist or blacklist mode | | [`acl_down_policy`](/docs/agent/options.html#acl_down_policy_legacy) | `OPTIONAL` | `OPTIONAL` | Determines what to do when the ACL datacenter is offline | | [`acl_ttl`](/docs/agent/options.html#acl_ttl_legacy) | `OPTIONAL` | `OPTIONAL` | Determines time-to-live for cached ACLs | There are some additional configuration items related to [ACL replication](#replication) and [Version 8 ACL support](#version_8_acls). These are discussed in those respective sections below. A number of special tokens can also be configured which allow for bootstrapping the ACL system, or accessing Consul in special situations: | Special Token | Servers | Clients | Purpose | | ------------- | ------- | ------- | ------- | | [`acl_agent_master_token`](/docs/agent/options.html#acl_agent_master_token_legacy) | `OPTIONAL` | `OPTIONAL` | Special token that can be used to access [Agent API](/api/agent.html) when the ACL datacenter isn't available, or servers are offline (for clients); used for setting up the cluster such as doing initial join operations, see the [ACL Agent Master Token](#acl-agent-master-token) section for more details | | [`acl_agent_token`](/docs/agent/options.html#acl_agent_token_legacy) | `OPTIONAL` | `OPTIONAL` | Special token that is used for an agent's internal operations, see the [ACL Agent Token](#acl-agent-token) section for more details | | [`acl_master_token`](/docs/agent/options.html#acl_master_token_legacy) | `REQUIRED` | `N/A` | Special token used to bootstrap the ACL system, see the [Bootstrapping ACLs](#bootstrapping-acls) section for more details | | [`acl_token`](/docs/agent/options.html#acl_token_legacy) | `OPTIONAL` | `OPTIONAL` | Default token to use for client requests where no token is supplied; this is often configured with read-only access to services to enable DNS service discovery on agents | In Consul 0.9.1 and later, the agent ACL tokens can be introduced or updated via the [/v1/agent/token API](/api/agent.html#update-acl-tokens). #### ACL Agent Master Token Since the [`acl_agent_master_token`](/docs/agent/options.html#acl_agent_master_token_legacy) is designed to be used when the Consul servers are not available, its policy is managed locally on the agent and does not need to have a token defined on the Consul servers via the ACL API. Once set, it implicitly has the following policy associated with it (the `node` policy was added in Consul 0.9.0): ```hcl agent "" { policy = "write" } node "" { policy = "read" } ``` In Consul 0.9.1 and later, the agent ACL tokens can be introduced or updated via the [/v1/agent/token API](/api/agent.html#update-acl-tokens). #### ACL Agent Token The [`acl_agent_token`](/docs/agent/options.html#acl_agent_token) is a special token that is used for an agent's internal operations. It isn't used directly for any user-initiated operations like the [`acl_token`](/docs/agent/options.html#acl_token), though if the `acl_agent_token` isn't configured the `acl_token` will be used. The ACL agent token is used for the following operations by the agent: 1. Updating the agent's node entry using the [Catalog API](/api/catalog.html), including updating its node metadata, tagged addresses, and network coordinates 2. Performing [anti-entropy](/docs/internals/anti-entropy.html) syncing, in particular reading the node metadata and services registered with the catalog 3. Reading and writing the special `_rexec` section of the KV store when executing [`consul exec`](/docs/commands/exec.html) commands Here's an example policy sufficient to accomplish the above for a node called `mynode`: ```hcl node "mynode" { policy = "write" } service "" { policy = "read" } key "_rexec" { policy = "write" } ``` The `service` policy needs `read` access for any services that can be registered on the agent. If [remote exec is disabled](/docs/agent/options.html#disable_remote_exec), the default, then the `key` policy can be omitted. In Consul 0.9.1 and later, the agent ACL tokens can be introduced or updated via the [/v1/agent/token API](/api/agent.html#update-acl-tokens). ## Bootstrapping ACLs Bootstrapping ACLs on a new cluster requires a few steps, outlined in the examples in this section. #### Enable ACLs on the Consul Servers The first step for bootstrapping ACLs is to enable ACLs on the Consul servers in the ACL datacenter. In this example, we are configuring the following: 1. An ACL datacenter of "dc1", which is where these servers are 2. An ACL master token of "b1gs33cr3t"; see below for an alternative using the [/v1/acl/bootstrap API](/api/acl/acl.html#bootstrap-acls) 3. A default policy of "deny" which means we are in whitelist mode 4. A down policy of "extend-cache" which means that we will ignore token TTLs during an outage Here's the corresponding JSON configuration file: ```json { "acl_datacenter": "dc1", "acl_master_token": "b1gs33cr3t", "acl_default_policy": "deny", "acl_down_policy": "extend-cache" } ``` The servers will need to be restarted to load the new configuration. Please take care to start the servers one at a time, and ensure each server has joined and is operating correctly before starting another. The [`acl_master_token`](/docs/agent/options.html#acl_master_token) will be created as a "management" type token automatically. The [`acl_master_token`](/docs/agent/options.html#acl_master_token) is only installed when a server acquires cluster leadership. If you would like to install or change the [`acl_master_token`](/docs/agent/options.html#acl_master_token), set the new value for [`acl_master_token`](/docs/agent/options.html#acl_master_token) in the configuration for all servers. Once this is done, restart the current leader to force a leader election. In Consul 0.9.1 and later, you can use the [/v1/acl/bootstrap API](/api/acl/acl.html#bootstrap-acls) to make the initial master token, so a token never needs to be placed into a configuration file. To use this approach, omit `acl_master_token` from the above config and then call the API: ```text $ curl \ --request PUT \ http://127.0.0.1:8500/v1/acl/bootstrap {"ID":"fe3b8d40-0ee0-8783-6cc2-ab1aa9bb16c1"} ``` The returned token is the initial management token, which is randomly generated by Consul. It's only possible to bootstrap one time, and bootstrapping will be disabled if a master token was configured and created. Once the ACL system is bootstrapped, ACL tokens can be managed through the [ACL API](/api/acl/acl.html). #### Create an Agent Token After the servers are restarted above, you will see new errors in the logs of the Consul servers related to permission denied errors: ``` 2017/07/08 23:38:24 [WARN] agent: Node info update blocked by ACLs 2017/07/08 23:38:44 [WARN] agent: Coordinate update blocked by ACLs ``` These errors are because the agent doesn't yet have a properly configured [`acl_agent_token`](/docs/agent/options.html#acl_agent_token) that it can use for its own internal operations like updating its node information in the catalog and performing [anti-entropy](/docs/internals/anti-entropy.html) syncing. We can create a token using the ACL API, and the ACL master token we set in the previous step: ```text $ curl \ --request PUT \ --header "X-Consul-Token: b1gs33cr3t" \ --data \ '{ "Name": "Agent Token", "Type": "client", "Rules": "node \"\" { policy = \"write\" } service \"\" { policy = \"read\" }" }' http://127.0.0.1:8500/v1/acl/create {"ID":"fe3b8d40-0ee0-8783-6cc2-ab1aa9bb16c1"} ``` The returned value is the newly-created token. We can now add this to our Consul server configuration and restart the servers once more to apply it: ```json { "acl_datacenter": "dc1", "acl_master_token": "b1gs33cr3t", "acl_default_policy": "deny", "acl_down_policy": "extend-cache", "acl_agent_token": "fe3b8d40-0ee0-8783-6cc2-ab1aa9bb16c1" } ``` In Consul 0.9.1 and later you can also introduce the agent token using an API, so it doesn't need to be set in the configuration file: ```text $ curl \ --request PUT \ --header "X-Consul-Token: b1gs33cr3t" \ --data \ '{ "Token": "fe3b8d40-0ee0-8783-6cc2-ab1aa9bb16c1" }' http://127.0.0.1:8500/v1/agent/token/acl_agent_token ``` With that ACL agent token set, the servers will be able to sync themselves with the catalog: ``` 2017/07/08 23:42:59 [INFO] agent: Synced node info ``` See the [ACL Agent Token](#acl-agent-token) section for more details. #### Enable ACLs on the Consul Clients Since ACL enforcement also occurs on the Consul clients, we need to also restart them with a configuration file that enables ACLs: ```json { "acl_datacenter": "dc1", "acl_down_policy": "extend-cache", "acl_agent_token": "fe3b8d40-0ee0-8783-6cc2-ab1aa9bb16c1" } ``` Similar to the previous example, in Consul 0.9.1 and later you can also introduce the agent token using an API, so it doesn't need to be set in the configuration file: ```text $ curl \ --request PUT \ --header "X-Consul-Token: b1gs33cr3t" \ --data \ '{ "Token": "fe3b8d40-0ee0-8783-6cc2-ab1aa9bb16c1" }' http://127.0.0.1:8500/v1/agent/token/acl_agent_token ``` We used the same ACL agent token that we created for the servers, which will work since it was not specific to any node or set of service prefixes. In a more locked-down environment it is recommended that each client get an ACL agent token with `node` write privileges for just its own node name prefix, and `service` read privileges for just the service prefixes expected to be registered on that client. [Anti-entropy](/docs/internals/anti-entropy.html) syncing requires the ACL agent token to have `service` read privileges for all services that may be registered with the agent, so generally an empty `service` prefix can be used, as shown in the example. Clients will report similar permission denied errors until they are restarted with an ACL agent token. #### Set an Anonymous Policy (Optional) At this point ACLs are bootstrapped with ACL agent tokens configured, but there are no other policies set up. Even basic operations like `consul members` will be restricted by the ACL default policy of "deny": ``` $ consul members ``` We don't get an error since the ACL has filtered what we see, and we aren't allowed to see any nodes by default. If we supply the token we created above we will be able to see a listing of nodes because it has write privileges to an empty `node` prefix, meaning it has access to all nodes: ``` $ CONSUL_HTTP_TOKEN=fe3b8d40-0ee0-8783-6cc2-ab1aa9bb16c1 consul members Node Address Status Type Build Protocol DC node-1 127.0.0.1:8301 alive server 0.9.0dev 2 dc1 node-2 127.0.0.2:8301 alive client 0.9.0dev 2 dc1 ``` It's pretty common in many environments to allow listing of all nodes, even without a token. The policies associated with the special anonymous token can be updated to configure Consul's behavior when no token is supplied. The anonymous token is managed like any other ACL token, except that `anonymous` is used for the ID. In this example we will give the anonymous token read privileges for all nodes: ```text $ curl \ --request PUT \ --header "X-Consul-Token: b1gs33cr3t" \ --data \ '{ "ID": "anonymous", "Type": "client", "Rules": "node \"\" { policy = \"read\" }" }' http://127.0.0.1:8500/v1/acl/update {"ID":"anonymous"} ``` The anonymous token is implicitly used if no token is supplied, so now we can run `consul members` without supplying a token and we will be able to see the nodes: ``` $ consul members Node Address Status Type Build Protocol DC node-1 127.0.0.1:8301 alive server 0.9.0dev 2 dc1 node-2 127.0.0.2:8301 alive client 0.9.0dev 2 dc1 ``` The anonymous token is also used for DNS lookups since there's no way to pass a token as part of a DNS request. Here's an example lookup for the "consul" service: ``` $ dig @127.0.0.1 -p 8600 consul.service.consul ; <<>> DiG 9.8.3-P1 <<>> @127.0.0.1 -p 8600 consul.service.consul ; (1 server found) ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 9648 ;; flags: qr aa rd; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 0 ;; WARNING: recursion requested but not available ;; QUESTION SECTION: ;consul.service.consul. IN A ;; AUTHORITY SECTION: consul. 0 IN SOA ns.consul. postmaster.consul. 1499584110 3600 600 86400 0 ;; Query time: 2 msec ;; SERVER: 127.0.0.1#8600(127.0.0.1) ;; WHEN: Sun Jul 9 00:08:30 2017 ;; MSG SIZE rcvd: 89 ``` Now we get an `NXDOMAIN` error because the anonymous token doesn't have access to the "consul" service. Let's add that to the anonymous token's policy: ```text $ curl \ --request PUT \ --header "X-Consul-Token: b1gs33cr3t" \ --data \ '{ "ID": "anonymous", "Type": "client", "Rules": "node \"\" { policy = \"read\" } service \"consul\" { policy = \"read\" }" }' http://127.0.0.1:8500/v1/acl/update {"ID":"anonymous"} ``` With that new policy in place, the DNS lookup will succeed: ``` $ dig @127.0.0.1 -p 8600 consul.service.consul ; <<>> DiG 9.8.3-P1 <<>> @127.0.0.1 -p 8600 consul.service.consul ; (1 server found) ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 46006 ;; flags: qr aa rd; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; WARNING: recursion requested but not available ;; QUESTION SECTION: ;consul.service.consul. IN A ;; ANSWER SECTION: consul.service.consul. 0 IN A 127.0.0.1 ;; Query time: 0 msec ;; SERVER: 127.0.0.1#8600(127.0.0.1) ;; WHEN: Sun Jul 9 00:11:14 2017 ;; MSG SIZE rcvd: 55 ``` The next section shows an alternative to the anonymous token. #### Set Agent-Specific Default Tokens (Optional) An alternative to the anonymous token is the [`acl_token`](/docs/agent/options.html#acl_token) configuration item. When a request is made to a particular Consul agent and no token is supplied, the [`acl_token`](/docs/agent/options.html#acl_token) will be used for the token, instead of being left empty which would normally invoke the anonymous token. In Consul 0.9.1 and later, the agent ACL tokens can be introduced or updated via the [/v1/agent/token API](/api/agent.html#update-acl-tokens). This behaves very similarly to the anonymous token, but can be configured differently on each agent, if desired. For example, this allows more fine grained control of what DNS requests a given agent can service, or can give the agent read access to some key-value store prefixes by default. If using [`acl_token`](/docs/agent/options.html#acl_token), then it's likely the anonymous token will have a more restrictive policy than shown in the examples here. #### Create Tokens for UI Use (Optional) If you utilize the Consul UI with a restrictive ACL policy, as above, the UI will not function fully using the anonymous ACL token. It is recommended that a UI-specific ACL token is used, which can be set in the UI during the web browser session to authenticate the interface. ```text $ curl \ --request PUT \ --header "X-Consul-Token: b1gs33cr3t" \ --data \ '{ "Name": "UI Token", "Type": "client", "Rules": "key \"\" { policy = \"write\" } node \"\" { policy = \"read\" } service \"\" { policy = \"read\" }" }' http://127.0.0.1:8500/v1/acl/create {"ID":"d0a9f330-2f9d-0a8c-d2af-1e9ceda354e6"} ``` The token can then be set on the "settings" page of the UI. #### Next Steps The examples above configure a basic ACL environment with the ability to see all nodes by default, and limited access to just the "consul" service. The [ACL API](/api/acl/acl.html) can be used to create tokens for applications specific to their intended use, and to create more specific ACL agent tokens for each agent's expected role. Also see [HashiCorp's Vault](https://www.vaultproject.io/docs/secrets/consul/index.html), which has an integration with Consul that allows it to generate ACL tokens on the fly and to manage their lifetimes. ## Rule Specification A core part of the ACL system is the rule language which is used to describe the policy that must be enforced. Most of the ACL rules are prefix-based, allowing operators to define different namespaces within Consul's resource areas like the catalog and key/value store, in order to delegate responsibility for these namespaces. Policies can have several dispositions: * `read`: allow the resource to be read but not modified * `write`: allow the resource to be read and modified * `deny`: do not allow the resource to be read or modified With prefix-based rules, the most specific prefix match determines the action. This allows for flexible rules like an empty prefix to allow read-only access to all resources, along with some specific prefixes that allow write access or that are denied all access. We make use of the [HashiCorp Configuration Language (HCL)](https://github.com/hashicorp/hcl/) to specify rules. This language is human readable and interoperable with JSON making it easy to machine-generate. Rules can make use of one or more policies. Specification in the HCL format looks like: ```hcl # These control access to the key/value store. key "" { policy = "read" } key "foo/" { policy = "write" } key "foo/private/" { policy = "deny" } # This controls access to cluster-wide Consul operator information. operator = "read" ``` This is equivalent to the following JSON input: ```javascript { "key": { "": { "policy": "read" }, "foo/": { "policy": "write" }, "foo/private/": { "policy": "deny" } }, "operator": "read" } ``` The [ACL API](/api/acl/acl.html) allows either HCL or JSON to be used to define the content of the rules section. Here's a sample request using the HCL form: ```text $ curl \ --request PUT \ --data \ '{ "Name": "my-app-token", "Type": "client", "Rules": "key \"\" { policy = \"read\" } key \"foo/\" { policy = \"write\" } key \"foo/private/\" { policy = \"deny\" } operator = \"read\"" }' http://127.0.0.1:8500/v1/acl/create?token= ``` Here's an equivalent request using the JSON form: ```text $ curl \ --request PUT \ --data \ '{ "Name": "my-app-token", "Type": "client", "Rules": "{\"key\":{\"\":{\"policy\":\"read\"},\"foo/\":{\"policy\":\"write\"},\"foo/private\":{\"policy\":\"deny\"}},\"operator\":\"read\"}" }' http://127.0.0.1:8500/v1/acl/create?token= ``` On success, the token ID is returned: ```json { "ID": "adf4238a-882b-9ddc-4a9d-5b6758e4159e" } ``` This token ID can then be passed into Consul's HTTP APIs via the `token` query string parameter, or the `X-Consul-Token` request header, or Authorization Bearer token header, or Consul's CLI commands via the `token` argument, or the `CONSUL_HTTP_TOKEN` environment variable. #### Agent Rules The `agent` policy controls access to the utility operations in the [Agent API](/api/agent.html), such as join and leave. All of the catalog-related operations are covered by the [`node`](#node-rules) and [`service`](#service-rules) policies instead. Agent rules look like this: ```hcl agent "" { policy = "read" } agent "foo" { policy = "write" } agent "bar" { policy = "deny" } ``` Agent rules are keyed by the node name prefix they apply to, using the longest prefix match rule. In the example above, the rules allow read-only access to any node name with the empty prefix, allow read-write access to any node name that starts with "foo", and deny all access to any node name that starts with "bar". Since [Agent API](/api/agent.html) utility operations may be required before an agent is joined to a cluster, or during an outage of the Consul servers or ACL datacenter, a special token may be configured with [`acl_agent_master_token`](/docs/agent/options.html#acl_agent_master_token) to allow write access to these operations even if no ACL resolution capability is available. #### Event Rules The `event` policy controls access to event operations in the [Event API](/api/event.html), such as firing events and listing events. Event rules look like this: ```hcl event "" { policy = "read" } event "deploy" { policy = "write" } ``` Event rules are keyed by the event name prefix they apply to, using the longest prefix match rule. In the example above, the rules allow read-only access to any event, and firing of any event that starts with "deploy". The [`consul exec`](/docs/commands/exec.html) command uses events with the "_rexec" prefix during operation, so to enable this feature in a Consul environment with ACLs enabled, you will need to give agents a token with access to this event prefix, in addition to configuring [`disable_remote_exec`](/docs/agent/options.html#disable_remote_exec) to `false`. #### Key/Value Rules The `key` policy controls access to key/value store operations in the [KV API](/api/kv.html). Key rules look like this: ```hcl key "" { policy = "read" } key "foo" { policy = "write" } key "bar" { policy = "deny" } ``` Key rules are keyed by the key name prefix they apply to, using the longest prefix match rule. In the example above, the rules allow read-only access to any key name with the empty prefix, allow read-write access to any key name that starts with "foo", and deny all access to any key name that starts with "bar". #### List Policy for Keys Consul 1.0 introduces a new `list` policy for keys that is only enforced when opted in via the boolean config param "acl_enable_key_list_policy". `list` controls access to recursively list entries and keys, and enables more fine grained policies. With "acl_enable_key_list_policy", recursive reads via [the KV API](/api/kv.html#recurse) with an invalid token result in a 403. Example: ```hcl key "" { policy = "deny" } key "bar" { policy = "list" } key "baz" { policy = "read" } ``` In the example above, the rules allow reading the key "baz", and only allow recursive reads on the prefix "bar". A token with `write` access on a prefix also has `list` access. A token with `list` access on a prefix also has `read` access on all its suffixes. #### Sentinel Integration Consul Enterprise supports additional optional fields for key write policies for [Sentinel](https://docs.hashicorp.com/sentinel/app/consul/) integration. An example key rule with a Sentinel code policy looks like this: ```hcl key "foo" { policy = "write" sentinel { code = < Operation Version <= 0.6.3 Version > 0.6.3 Create static query without `Name` The ACL Token used to create the prepared query is checked to make sure it can access the service being queried. This token is captured as the `Token` to use when executing the prepared query. No ACL policies are used as long as no `Name` is defined. No `Token` is captured by default unless specifically supplied by the client when creating the query. Create static query with `Name` The ACL Token used to create the prepared query is checked to make sure it can access the service being queried. This token is captured as the `Token` to use when executing the prepared query. The client token's `query` ACL policy is used to determine if the client is allowed to register a query for the given `Name`. No `Token` is captured by default unless specifically supplied by the client when creating the query. Manage static query without `Name` The ACL Token used to create the query, or a management token must be supplied in order to perform these operations. Any client with the ID of the query can perform these operations. Manage static query with a `Name` The ACL token used to create the query, or a management token must be supplied in order to perform these operations. Similar to create, the client token's `query` ACL policy is used to determine if these operations are allowed. List queries A management token is required to list any queries. The client token's `query` ACL policy is used to determine which queries they can see. Only management tokens can see prepared queries without `Name`. Execute query Since a `Token` is always captured when a query is created, that is used to check access to the service being queried. Any token supplied by the client is ignored. The captured token, client's token, or anonymous token is used to filter the results, as described above. #### Service Rules The `service` policy controls service-level registration and read access to the [Catalog API](/api/catalog.html) and service discovery with the [Health API](/api/health.html). Service rules look like this: ```hcl service "" { policy = "read" } service "app" { policy = "write" } service "admin" { policy = "deny" } ``` Service rules are keyed by the service name prefix they apply to, using the longest prefix match rule. In the example above, the rules allow read-only access to any service name with the empty prefix, allow read-write access to any service name that starts with "app", and deny all access to any service name that starts with "admin". Consul's DNS interface is affected by restrictions on service rules. If the [`acl_token`](/docs/agent/options.html#acl_token) used by the agent does not have "read" access to a given service, then the DNS interface will return no records when queried for it. When reading from the catalog or retrieving information from the health endpoints, service rules are used to filter the results of the query. Service rules come into play when using the [Agent API](/api/agent.html) to register services or checks. The agent will check tokens locally as a service or check is registered, and Consul also performs periodic [anti-entropy](/docs/internals/anti-entropy.html) syncs, which may require an ACL token to complete. To accommodate this, Consul provides two methods of configuring ACL tokens to use for registration events: 1. Using the [acl_token](/docs/agent/options.html#acl_token) configuration directive. This allows a single token to be configured globally and used during all service and check registration operations. 2. Providing an ACL token with service and check definitions at registration time. This allows for greater flexibility and enables the use of multiple tokens on the same agent. Examples of what this looks like are available for both [services](/docs/agent/services.html) and [checks](/docs/agent/checks.html). Tokens may also be passed to the [HTTP API](/api/index.html) for operations that require them. **Note:** all tokens passed to an agent are persisted on local disk to allow recovery from restarts. See [`-data-dir` flag documentation](/docs/agent/options.html#acl_token) for notes on securing access. In addition to ACLs, in Consul 0.9.0 and later, the agent must be configured with [`enable_script_checks`](/docs/agent/options.html#_enable_script_checks) or [`enable_local_script_checks`](/docs/agent/options.html#_enable_local_script_checks) set to `true` in order to enable script checks. #### Session Rules The `session` policy controls access to [Session API](/api/session.html) operations. Session rules look like this: ```hcl session "" { policy = "read" } session "app" { policy = "write" } session "admin" { policy = "deny" } ``` Session rules are keyed by the node name prefix they apply to, using the longest prefix match rule. In the example above, the rules allow read-only access to sessions on node name with the empty prefix, allow creating sessions on any node name that starts with "app", and deny all access to any sessions on a node name that starts with "admin". ## Advanced Topics #### Outages and ACL Replication The Consul ACL system is designed with flexible rules to accommodate for an outage of the [`acl_datacenter`](/docs/agent/options.html#acl_datacenter) or networking issues preventing access to it. In this case, it may be impossible for agents in non-authoritative datacenters to resolve tokens. Consul provides a number of configurable [`acl_down_policy`](/docs/agent/options.html#acl_down_policy) choices to tune behavior. It is possible to deny or permit all actions or to ignore cache TTLs and enter a fail-safe mode. The default is to ignore cache TTLs for any previously resolved tokens and to deny any uncached tokens. Consul 0.7 added an ACL Replication capability that can allow non-authoritative datacenter agents to resolve even uncached tokens. This is enabled by setting an [`acl_replication_token`](/docs/agent/options.html#acl_replication_token) in the configuration on the servers in the non-authoritative datacenters. In Consul 0.9.1 and later you can enable ACL replication using [`enable_acl_replication`](/docs/agent/options.html#enable_acl_replication) and then set the token later using the [agent token API](/api/agent.html#update-acl-tokens) on each server. This can also be used to rotate the token without restarting the Consul servers. With replication enabled, the servers will maintain a replica of the authoritative datacenter's full set of ACLs on the non-authoritative servers. The ACL replication token needs to be a valid ACL token with management privileges, it can also be the same as the master ACL token. Replication occurs with a background process that looks for new ACLs approximately every 30 seconds. Replicated changes are written at a rate that's throttled to 100 updates/second, so it may take several minutes to perform the initial sync of a large set of ACLs. If there's a partition or other outage affecting the authoritative datacenter, and the [`acl_down_policy`](/docs/agent/options.html#acl_down_policy) is set to "extend-cache", tokens will be resolved during the outage using the replicated set of ACLs. An [ACL replication status](/api/acl/acl.html#acl_replication_status) endpoint is available to monitor the health of the replication process. Also note that in recent versions of Consul (greater than 1.2.0), using `acl_down_policy = "async-cache"` refreshes token asynchronously when an ACL is already cached and is expired while similar semantics than "extend-cache". It allows to avoid having issues when connectivity with the authoritative is not completely broken, but very slow. Locally-resolved ACLs will be cached using the [`acl_ttl`](/docs/agent/options.html#acl_ttl) setting of the non-authoritative datacenter, so these entries may persist in the cache for up to the TTL, even after the authoritative datacenter comes back online. ACL replication can also be used to migrate ACLs from one datacenter to another using a process like this: 1. Enable ACL replication in all datacenters to allow continuation of service during the migration, and to populate the target datacenter. Verify replication is healthy and caught up to the current ACL index in the target datacenter using the [ACL replication status](/api/acl/acl.html#acl_replication_status) endpoint. 2. Turn down the old authoritative datacenter servers. 3. Rolling restart the agents in the target datacenter and change the `acl_datacenter` servers to itself. This will automatically turn off replication and will enable the datacenter to start acting as the authoritative datacenter, using its replicated ACLs from before. 3. Rolling restart the agents in other datacenters and change their `acl_datacenter` configuration to the target datacenter. #### Complete ACL Coverage in Consul 0.8 Consul 0.8 added many more ACL policy types and brought ACL enforcement to Consul agents for the first time. To ease the transition to Consul 0.8 for existing ACL users, there's a configuration option to disable these new features. To disable support for these new ACLs, set the [`acl_enforce_version_8`](/docs/agent/options.html#acl_enforce_version_8) configuration option to `false` on Consul clients and servers. Here's a summary of the new features: * Agents now check [`node`](#node-rules) and [`service`](#service-rules) ACL policies for catalog-related operations in `/v1/agent` endpoints, such as service and check registration and health check updates. * Agents enforce a new [`agent`](#agent-rules) ACL policy for utility operations in `/v1/agent` endpoints, such as joins and leaves. * A new [`node`](#node-rules) ACL policy is enforced throughout Consul, providing a mechanism to restrict registration and discovery of nodes by name. This also applies to service discovery, so provides an additional dimension for controlling access to services. * A new [`session`](#session-rules) ACL policy controls the ability to create session objects by node name. * Anonymous prepared queries (non-templates without a `Name`) now require a valid session, which ties their creation to the new [`session`](#session-rules) ACL policy. * The existing [`event`](#event-rules) ACL policy has been applied to the `/v1/event/list` endpoint. Two new configuration options are used once version 8 ACLs are enabled: * [`acl_agent_master_token`](/docs/agent/options.html#acl_agent_master_token) is used as a special access token that has `agent` ACL policy `write` privileges on each agent where it is configured, as well as `node` ACL policy `read` privileges for all nodes. This token should only be used by operators during outages when Consul servers aren't available to resolve ACL tokens. Applications should use regular ACL tokens during normal operation. * [`acl_agent_token`](/docs/agent/options.html#acl_agent_token) is used internally by Consul agents to perform operations to the service catalog when registering themselves or sending network coordinates to the servers. This token must at least have `node` ACL policy `write` access to the node name it will register as in order to register any node-level information like metadata or tagged addresses. Since clients now resolve ACLs locally, the [`acl_down_policy`](/docs/agent/options.html#acl_down_policy) now applies to Consul clients as well as Consul servers. This will determine what the client will do in the event that the servers are down. Consul clients must have [`acl_datacenter`](/docs/agent/options.html#acl_datacenter) configured in order to enable agent-level ACL features. If this is set, the agents will contact the Consul servers to determine if ACLs are enabled at the cluster level. If they detect that ACLs are not enabled, they will check at most every 2 minutes to see if they have become enabled, and will start enforcing ACLs automatically. If an agent has an `acl_datacenter` defined, operators will need to use the [`acl_agent_master_token`](/docs/agent/options.html#acl_agent_master_token) to perform agent-level operations if the Consul servers aren't present (such as for a manual join to the cluster), unless the [`acl_down_policy`](/docs/agent/options.html#acl_down_policy) on the agent is set to "allow". Non-server agents do not need to have the [`acl_master_token`](/docs/agent/options.html#acl_master_token) configured; it is not used by agents in any way.