--- layout: docs page_title: Consul Enterprise Admin Partitions description: Consul Enterprise enables you to create paritions that can be administrated across namespaces. --- # Consul Enterprise Admin Partitions This feature requires{' '} Consul Enterprise{' '} with the Governance and Policy module. This topic provides and overview of admin partitions, which are entities that define one or more administrative boundaries for single Consul deployments. ## Introduction Admin partitions exist a level above namespaces in the identity hierarchy. They contain one or more namespaces and allow multiple independent tenants to share a Consul server cluster. As a result, admin partitions enable you to define administrative and communication boundaries between services managed by separate teams or belonging to separate stakeholders. They can also segment production and non-production services within the Consul deployment. -> **Preexisting resource nodes and namespaces**: Admin partitions were introduced in Consul 1.11. Resource nodes were not namespaced prior to 1.11. After upgrading to Consul 1.11 or later, all resource nodes will be namespaced. ### Default Admin Partition Each Consul cluster will have at least one default admin partition (named `default`). Any resource created without specifying an admin partition will inherit the partition of the ACL token. The `default` admin partition is special in that it may contain namespaces and other entities that are replicated between datacenters. -> **Preexisting resources and the `default` partition**: Admin partitions were introduced in Consul 1.11. After upgrading to Consul 1.11 or later, the `default` partition will contain all resources created in previous versions. ### Naming Admin Partitions Only characters that are valid in DNS names can be used to name admin partitions. Names must also start with a letter. ### Namespaces When an admin partition is created, it will include a `default` namespace. You can create additional namespaces within the partition. All namespaces must exist within an admin partition. By extension, the partition will also contain all namespaced resources. Within a single datacenter, a namespace in one admin partition is logically separate from any other namespace with the same name in other admin partitions. ### Cross-datacenter Replication Only resources in the default admin partition will be replicated to secondary datacenters. Non-default partitions are currently not supported in secondary datacenters. ### DNS Queries Client agents will be configured to operate within a specific admin partition. The DNS interface will only return results for the admin partition within the scope of the client. ### Service Mesh Configurations Values specified for [`proxy-defaults`](docs/connect/config-entries/proxy-defaults) configurations are scoped to a specific partition. Services registered in the partition will use the partition's `proxy-defaults` values. ## Requirements Your Consul configuration must meet the following requirements to use admin partitions. ### Versions * Consul 1.11.0 and newer ### Security Configurations * The agent token used by the client agent will need to allow `node:write` in the admin partition. * The `write` permission for `proxy-defaults` requires `mesh:write`. See [Admin Partition Rules](/docs/security/acl/acl-rules#admin-partition-rules) for additional information. * The `write` permissions for ingress and terminating gateways require `mesh:write` privileges. * Wildcards (`*`) are not supported when creating intentions for admin partitions, but you can use a wildcard to specify services within a partition. ### Agent Configurations * In client agent configurations, the admin partition name should be specified in the agent configuration: ```hcl partition = "" ``` * The anti-entropy sync will use the configured admin partition name when registering the node. ### Kubernetes Requirements One of the primary use cases for admin partitions is for enabling a service mesh on Kubernetes clusters. The following requirements must be met to create admin partitions on Kubernetes: * Two or more Kubernetes clusters with Consul servers installed on one of them. The other clusters should run Consul clients. * A Consul Enterprise license must be installed on each instance of Consul. * The helm chart consul-k8s v0.34.1 or greater. * Consul 1.11.0-ent-alpha or greater. * All instances in the VPC must be able to communicate with each other. * Pods must be able to communicate with each other (flat pod and node network). See [step 3](#firewall-rules) in the Deploying Consul with Admin Partitions on Kubernetes section for additional information ## Usage This section describes how to deploy Consul admin partitions to Kubernetes clusters, as well as directs you to the CLI reference for interacting with the admin partitions API on the command line. ### Deploying Consul with Admin Partitions on Kubernetes The expected use case to create admin partitions on Kubernetes clusters. This is because many organizations prefer to use cloud-managed Kubernetes offerings to provision separate Kubernetes clusters for individual teams, business units, or environments. This is opposed to deploying a single, large Kubernetes cluster. When these organizations attempt to use a service mesh to enable cross-cluster activities, such as administration tasks and communication between nodes, they encounter problems. The following procedure will result in different admin partitions in each Kubernetes cluster. The Consul clients running in the cluster with servers will be in the `default` partition. Another partition called `clients` will also be created. Verify that your Consul deployment meets the [Kubernetes Requirements](#kubernetes-requirements) before proceeding. 1. Update the firewall rules to ensure the pod network is flat. The following example for Google Kubernetes Engine (GKE) describes how to create a firewall rule that allows all pod and node network traffic to talk to the server and workload nodegroups: 1. Open the **VPC Network > Firewall** section and identify the rules associated with your clusters. The cluster name is a part of the rule. ![IP address ranges for GKE clusters](/img/admin-partitions/consul-admin-partitions-gke-cluster-1.png) ![IP address ranges for GKE clusters](/img/admin-partitions/consul-admin-partitions-gke-cluster-2.png) The `gke-cluster-1-7b43116f-node` and `gke-cluster-2-48d3bee6-node` labels are the node names for the GKE clusters. The `10.128.0.0/9` IP range represents the node IP network. The IP range of the node VMs in the clusters are within this range. The `10.44.0.0/14` and `10.4.0.0/14` IP ranges are the pod IP ranges for the GKE clusters. 1. Enter the `gke-cluster-1-7b43116f-node` and `gke-cluster-2-48d3bee6-node` node names in the target fields of the firewall rule. 1. Enter the `10.128.0.0/9`, `10.44.0.0/14`, and `10.4.0.0/14` IP into the source fields. This will ensure that traffic from the nodes and the pods in each cluster can access the nodes and pods in the other. ![Configured GKE cluster firewall rule for Consul admin partitions](/img/admin-partitions/consul-admin-partitions-gke-firewall-rule.png) 1. Create the license secret in each cluster, e.g.: ```shell-session kubectl create secret generic license --from-file=key=[license file path i.e. ./license.hclic] ``` This step must also be completed for each workload cluster. 1. Create a server configuration file to override the default Consul Helm chart settings: ```yaml global: enableConsulNamespaces: true tls: enabled: true image: hashicorp/consul-enterprise:1.11.0-ent-beta1 adminPartitions: enabled: true server: exposeGossipAndRPCPorts: true enterpriseLicense: secretName: license secretKey: key connectInject: enabled: true transparentProxy: defaultEnabled: false consulNamespaces: mirroringK8S: true controller: enabled: true ``` Note that the `transparentProxy` configuration is disabled. This is to enable multi-cluster networking. 1. Start the Consul server(s) using the custom configuration file: ```shell-session helm install server hashicorp/consul -f server.yaml ``` 1. After the server starts, get the external IP address for partition service so that it can be added to the client configuration. The partition service is a `LoadBalancer` type. The IP address is where clients that across your partitions will communicate with servers in this cluster. ```shell-session kubectl get service NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE kubernetes ClusterIP 10.96.0.1 443/TCP 3m servers-consul-connect-injector-svc ClusterIP 10.97.175.39 443/TCP 30s servers-consul-controller-webhook ClusterIP 10.100.22.99 443/TCP 30s servers-consul-dns ClusterIP 10.103.43.20 53/TCP,53/UDP 30s servers-consul-partition-service LoadBalancer 10.111.255.152 35.192.119.38 8501:30643/TCP,8301:30466/TCP,8300:30657/TCP 30s servers-consul-server ClusterIP None 8501/TCP,8301/TCP,8301/UDP,8302/TCP,8302/UDP,8300/TCP,8600/TCP,8600/UDP 30s servers-consul-ui ClusterIP 10.106.240.55 443/TCP 30s 1. Create the workload configuration for client nodes in your cluster. Create a configuration for each admin partition. In the following example, the external IP address from the previous step has been applied: ```yaml global: enabled: false enableConsulNamespaces: true image: hashicorp/consul-enterprise:1.11.0-ent-beta1 adminPartitions: enabled: true name: "clients" // partition name tls: enabled: true caCert: secretName: consul-consul-ca-cert secretKey: tls.crt caKey: secretName: consul-consul-ca-key secretKey: tls.key server: enterpriseLicense: secretName: license secretKey: key externalServers: enabled: true hosts: "35.192.119.38" # Insert External IP of LoadBalancer here tlsServerName: server.dc1.consul client: enabled: true exposeGossipPorts: true join: "35.192.119.38" connectInject: enabled: true consulNamespaces: mirroringK8S: true controller: enabled: true ``` 1. Copy the server certificate to the workload cluster. ```shell-session kubectl get secret server-consul-ca-cert --context server -o yaml | kubectl apply --context client -f - ``` 1. Copy the server key to the workload cluster. ```shell-session kubectl get secret consul-consul-ca-key --context server -o yaml | kubectl apply --context client -f - ``` 1. Start the workload client clusters: ```shell-session helm install client hashicorp/consul -f client.yaml ``` ### CLI Usage You can use create and manage admin partitions through the CLI. Refer to the [admin partition CLI documentation](/commands/admin-partition) for details. ## Known Limitations * Gossip between nodes in different admin partitions must be constrained. You can accomplish this with through the use of [network segments](network-segments). * Cross-partition communication is not currently supported. * Partitions can only be created in the primary datacenter.