--- layout: docs page_title: Connect - WAN Federation via Mesh Gateways sidebar_title: WAN Federation via Mesh Gateways Beta description: |- WAN federation via mesh gateways allows for Consul servers in different datacenters to be federated exclusively through mesh gateways. --- # WAN Federation via Mesh Gateways Beta -> **1.8.0+:** This feature is available in Consul versions 1.8.0 and higher ~> This topic requires familiarity with [mesh gateways](/docs/connect/mesh-gateway). WAN federation via mesh gateways allows for Consul servers in different datacenters to be federated exclusively through mesh gateways. When setting up a [multi-datacenter](https://learn.hashicorp.com/consul/security-networking/datacenters) Consul cluster, operators must ensure that all Consul servers in every datacenter must be directly connectable over their WAN-advertised network address from each other. This requires that operators setting up the virtual machines or containers hosting the servers take additional steps to ensure the necessary routing and firewall rules are in place to allow the servers to speak to each other over the WAN. Sometimes this prerequisite is difficult or undesirable to meet: * **Difficult:** The datacenters may exist in multiple Kubernetes clusters that unfortunately have overlapping pod IP subnets, or may exist in different cloud provider VPCs that have overlapping subnets. * **Undesirable:** Network security teams may not approve of granting so many firewall rules. When using platform autoscaling, keeping rules up to date becomes untenable. Operators looking to simplify their WAN deployment and minimize the exposed security surface area can elect to join these datacenters together using [mesh gateways](/docs/connect/mesh-gateways.html) to do so. ## Architecture There are two main kinds of communication that occur over the WAN link spanning the gulf between disparate Consul datacenters: * **WAN gossip:** We leverage the serf and memberlist libraries to gossip around failure detector knowledge about Consul servers in each datacenter. By default this operates point to point between servers over `8302/udp` with a fallback to `8302/tcp` (which logs a warning indicating the network is misconfigured). * **Cross-datacenter RPCs:** Consul servers expose a special multiplexed port over `8300/tcp`. Several distinct kinds of messages can be received on this port, such as RPC requests forwarded from servers in other datacenters. In this network topology individual Consul client agents on a LAN in one datacenter never need to directly dial servers in other datacenters. This means you could introduce a set of firewall rules prohibiting `10.0.0.0/24` from sending any traffic at all to `10.1.2.0/24` for security isolation. You may already have configured [mesh gateways](https://learn.hashicorp.com/consul/developer-mesh/connect-gateways) to allow for services in the service mesh to freely connect between datacenters regardless of the lateral connectivity of the nodes hosting the Consul client agents. By activating WAN federation via mesh gateways the servers can similarly use the existing mesh gateways to reach each other without themselves being directly reachable. ## Configuration ### TLS All Consul servers in all datacenters should have TLS configured with certificates containing these SAN fields: server.. (normal) .server.. (needed for wan federation) This can be achieved using any number of tools, including `consul tls cert create` with the `-node` flag. ### Mesh Gateways There needs to be at least one mesh gateway configured to opt-in to exposing the servers in its configuration. When using the `consul connect envoy` CLI this is done by using the flag `-expose-servers`. All this does is to register the mesh gateway into the catalog with the additional piece of service metadata of `{"consul-wan-federation":"1"}`. If you are registering the mesh gateways into the catalog out of band you may simply add this to your existing registration payload. !> Before activating the feature on an existing cluster you should ensure that there is at least one mesh gateway prepared to expose the servers registered in each datacenter otherwise the WAN will become only partly connected. ### Consul Server Options There are a few necessary additional pieces of configuration beyond those required for standing up a [multi-datacenter](https://learn.hashicorp.com/consul/security-networking/datacenters) Consul cluster. Consul servers in the _primary_ datacenter should add this snippet to the configuration file: ```hcl connect { enabled = true enable_mesh_gateway_wan_federation = true } ``` Consul servers in all _secondary_ datacenters should add this snippet to the configuration file: ```hcl primary_gateways = [ ":", ... ] connect { enabled = true enable_mesh_gateway_wan_federation = true } ``` Any references to [`start_join_wan`](/docs/agent/options#start_join_wan) or [`retry_join_wan`](/docs/agent/options#retry_join_wan) should be omitted. -> The `primary_gateways` configuration can also use `go-discover` syntax just like `retry_join_wan`. ### Bootstrapping For ease of debugging (such as avoiding a flurry of misleading error messages) when intending to activate WAN federation via mesh gateways it is best to follow this general procedure: ### New secondary 1. Upgrade to the desired version of the consul binary for all servers, clients, and CLI. 2. Start all consul servers and clients on the new version in the primary datacenter. 3. Ensure the primary datacenter has at least one running, registered mesh gateway with the service metadata key of `{"consul-wan-federation":"1"}` set. 4. Ensure you are _prepared_ to launch corresponding mesh gateways in all secondaries. When ACLs are enabled actually registering these requires upstream connectivity to the primary datacenter to authorize catalog registration. 5. Ensure all servers in the primary datacenter have updated configuration and restart. 6. Ensure all servers in the secondary datacenter have updated configuration. 7. Start all consul servers and clients on the new version in the secondary datacenter. 8. When ACLs are enabled, shortly afterwards it should become possible to resolve ACL tokens from the secondary, at which time it should be possible to launch the mesh gateways in the secondary datacenter. ### Existing secondary 1. Upgrade to the desired version of the consul binary for all servers, clients, and CLI. 2. Restart all consul servers and clients on the new version. 3. Ensure each datacenter has at least one running, registered mesh gateway with the service metadata key of `{"consul-wan-federation":"1"}` set. 4. Ensure all servers in the primary datacenter have updated configuration and restart. 5. Ensure all servers in the secondary datacenter have updated configuration and restart. ### Verification From any two datacenters joined together double check the following give you an expected result: * Check that `consul members -wan` lists all servers in all datacenters with their _local_ ip addresses and are listed as `alive`. * Ensure any API request that activates datacenter request forwarding. such as [`/v1/catalog/services?dc=`](/api/catalog.html#dc-1) succeeds.