--- layout: "docs" page_title: "Agent (HTTP)" sidebar_current: "docs-agent-http-agent" description: > The Agent endpoints are used to interact with the local Consul agent. --- # Agent HTTP Endpoint The Agent endpoints are used to interact with the local Consul agent. Usually, services and checks are registered with an agent which then takes on the burden of keeping that data synchronized with the cluster. For example, the agent registers services and checks with the Catalog and performs [anti-entropy](/docs/internals/anti-entropy.html) to recover from outages. The following endpoints are supported: * [`/v1/agent/checks`](#agent_checks) : Returns the checks the local agent is managing * [`/v1/agent/services`](#agent_services) : Returns the services the local agent is managing * [`/v1/agent/members`](#agent_members) : Returns the members as seen by the local serf agent * [`/v1/agent/self`](#agent_self) : Returns the local node configuration * [`/v1/agent/maintenance`](#agent_maintenance) : Manages node maintenance mode * [`/v1/agent/join/
`](#agent_join) : Triggers the local agent to join a node * [`/v1/agent/force-leave/`](#agent_force_leave)>: Forces removal of a node * [`/v1/agent/check/register`](#agent_check_register) : Registers a new local check * [`/v1/agent/check/deregister/`](#agent_check_deregister) : Deregisters a local check * [`/v1/agent/check/pass/`](#agent_check_pass) : Marks a local check as passing * [`/v1/agent/check/warn/`](#agent_check_warn) : Marks a local check as warning * [`/v1/agent/check/fail/`](#agent_check_fail) : Marks a local check as critical * [`/v1/agent/check/update/`](#agent_check_update) : Updates a local check * [`/v1/agent/service/register`](#agent_service_register) : Registers a new local service * [`/v1/agent/service/deregister/`](#agent_service_deregister) : Deregisters a local service * [`/v1/agent/service/maintenance/`](#agent_service_maintenance) : Manages service maintenance mode ### /v1/agent/checks This endpoint is used to return all the checks that are registered with the local agent. These checks were either provided through configuration files or added dynamically using the HTTP API. It is important to note that the checks known by the agent may be different from those reported by the Catalog. This is usually due to changes being made while there is no leader elected. The agent performs active [anti-entropy](/docs/internals/anti-entropy.html), so in most situations everything will be in sync within a few seconds. This endpoint is hit with a GET and returns a JSON body like this: ```javascript { "service:redis": { "Node": "foobar", "CheckID": "service:redis", "Name": "Service 'redis' check", "Status": "passing", "Notes": "", "Output": "", "ServiceID": "redis", "ServiceName": "redis" } } ``` ### /v1/agent/services This endpoint is used to return all the services that are registered with the local agent. These services were either provided through configuration files or added dynamically using the HTTP API. It is important to note that the services known by the agent may be different from those reported by the Catalog. This is usually due to changes being made while there is no leader elected. The agent performs active [anti-entropy](/docs/internals/anti-entropy.html), so in most situations everything will be in sync within a few seconds. This endpoint is hit with a GET and returns a JSON body like this: ```javascript { "redis": { "ID": "redis", "Service": "redis", "Tags": null, "Address": "", "Port": 8000 } } ``` ### /v1/agent/members This endpoint is used to return the members the agent sees in the cluster gossip pool. Due to the nature of gossip, this is eventually consistent: the results may differ by agent. The strongly consistent view of nodes is instead provided by "/v1/catalog/nodes". For agents running in server mode, providing a "?wan=1" query parameter returns the list of WAN members instead of the LAN members returned by default. This endpoint is hit with a GET and returns a JSON body like: ```javascript [ { "Name": "foobar", "Addr": "10.1.10.12", "Port": 8301, "Tags": { "bootstrap": "1", "dc": "dc1", "port": "8300", "role": "consul" }, "Status": 1, "ProtocolMin": 1, "ProtocolMax": 2, "ProtocolCur": 2, "DelegateMin": 1, "DelegateMax": 3, "DelegateCur": 3 } ] ``` ### /v1/agent/self This endpoint is used to return the configuration and member information of the local agent. It returns a JSON body like this: ```javascript { "Config": { "Bootstrap": true, "Server": true, "Datacenter": "dc1", "DataDir": "/tmp/consul", "DNSRecursor": "", "DNSRecursors": [], "Domain": "consul.", "LogLevel": "INFO", "NodeName": "foobar", "ClientAddr": "127.0.0.1", "BindAddr": "0.0.0.0", "AdvertiseAddr": "10.1.10.12", "Ports": { "DNS": 8600, "HTTP": 8500, "RPC": 8400, "SerfLan": 8301, "SerfWan": 8302, "Server": 8300 }, "LeaveOnTerm": false, "SkipLeaveOnInt": false, "StatsiteAddr": "", "Protocol": 1, "EnableDebug": false, "VerifyIncoming": false, "VerifyOutgoing": false, "CAFile": "", "CertFile": "", "KeyFile": "", "StartJoin": [], "UiDir": "", "PidFile": "", "EnableSyslog": false, "RejoinAfterLeave": false }, "Coord": { "Adjustment": 0, "Error": 1.5, "Vec": [0,0,0,0,0,0,0,0] }, "Member": { "Name": "foobar", "Addr": "10.1.10.12", "Port": 8301, "Tags": { "bootstrap": "1", "dc": "dc1", "port": "8300", "role": "consul", "vsn": "1", "vsn_max": "1", "vsn_min": "1" }, "Status": 1, "ProtocolMin": 1, "ProtocolMax": 2, "ProtocolCur": 2, "DelegateMin": 2, "DelegateMax": 4, "DelegateCur": 4 } } ``` ### /v1/agent/maintenance The node maintenance endpoint can place the agent into "maintenance mode". During maintenance mode, the node will be marked as unavailable and will not be present in DNS or API queries. This API call is idempotent. Maintenance mode is persistent and will be automatically restored on agent restart. The `?enable` flag is required. Acceptable values are either `true` (to enter maintenance mode) or `false` (to resume normal operation). The `?reason` flag is optional. If provided, its value should be a text string explaining the reason for placing the node into maintenance mode. This is simply to aid human operators. If no reason is provided, a default value will be used instead. The return code is 200 on success. ### /v1/agent/join/\ This endpoint is hit with a GET and is used to instruct the agent to attempt to connect to a given address. For agents running in server mode, providing a "?wan=1" query parameter causes the agent to attempt to join using the WAN pool. The return code is 200 on success. ### /v1/agent/force-leave/\ This endpoint is hit with a GET and is used to instruct the agent to force a node into the `left` state. If a node fails unexpectedly, then it will be in a `failed` state. Once in the `failed` state, Consul will attempt to reconnect, and the services and checks belonging to that node will not be cleaned up. Forcing a node into the `left` state allows its old entries to be removed. The endpoint always returns 200. ### /v1/agent/check/register The register endpoint is used to add a new check to the local agent. There is more documentation on checks [here](/docs/agent/checks.html). Checks may be of script, HTTP, TCP, or TTL type. The agent is responsible for managing the status of the check and keeping the Catalog in sync. The register endpoint expects a JSON request body to be PUT. The request body must look like: ```javascript { "ID": "mem", "Name": "Memory utilization", "Notes": "Ensure we don't oversubscribe memory", "Script": "/usr/local/bin/check_mem.py", "DockerContainerID": "f972c95ebf0e", "Shell": "/bin/bash", "HTTP": "http://example.com", "TCP": "example.com:22", "Interval": "10s", "TTL": "15s" } ``` The `Name` field is mandatory, as is one of `Script`, `HTTP`, `TCP` or `TTL`. `Script`, `TCP` and `HTTP` also require that `Interval` be set. If an `ID` is not provided, it is set to `Name`. You cannot have duplicate `ID` entries per agent, so it may be necessary to provide an `ID`. The `Notes` field is not used internally by Consul and is meant to be human-readable. If a `Script` is provided, the check type is a script, and Consul will evaluate the script every `Interval` to update the status. If a `DockerContainerID` is provided, the check is a Docker check, and Consul will evaluate the script every `Interval` in the given container using the specified `Shell`. Note that `Shell` is currently only supported for Docker checks. An `HTTP` check will perform an HTTP GET request against the value of `HTTP` (expected to be a URL) every `Interval`. If the response is any `2xx` code, the check is `passing`. If the response is `429 Too Many Requests`, the check is `warning`. Otherwise, the check is `critical`. An `TCP` check will perform an TCP connection attempt against the value of `TCP` (expected to be an IP/hostname and port combination) every `Interval`. If the connection attempt is successful, the check is `passing`. If the connection attempt is unsuccessful, the check is `critical`. In the case of a hostname that resolves to both IPv4 and IPv6 addresses, an attempt will be made to both addresses, and the first successful connection attempt will result in a successful check. If a `TTL` type is used, then the TTL update endpoint must be used periodically to update the state of the check. The `ServiceID` field can be provided to associate the registered check with an existing service provided by the agent. The `Status` field can be provided to specify the initial state of the health check. This endpoint supports [ACL tokens](/docs/internals/acl.html). If the query string includes a `?token=`, the registration will use the provided token to authorize the request. The token is also persisted in the agent's local configuration to enable periodic [anti-entropy](/docs/internals/anti-entropy.html) syncs and seamless agent restarts. The return code is 200 on success. ### /v1/agent/check/deregister/\ This endpoint is used to remove a check from the local agent. The `CheckID` must be passed on the path. The agent will take care of deregistering the check from the Catalog. The return code is 200 on success. ### /v1/agent/check/pass/\ This endpoint is used with a check that is of the [TTL type](/docs/agent/checks.html). When this endpoint is accessed via a GET, the status of the check is set to `passing` and the TTL clock is reset. The optional "?note=" query parameter can be used to associate a human-readable message with the status of the check. This will be passed through to the check's `Output` field in the check endpoints. The return code is 200 on success. ### /v1/agent/check/warn/\ This endpoint is used with a check that is of the [TTL type](/docs/agent/checks.html). When this endpoint is accessed via a GET, the status of the check is set to `warning`, and the TTL clock is reset. The optional "?note=" query parameter can be used to associate a human-readable message with the status of the check. This will be passed through to the check's `Output` field in the check endpoints. The return code is 200 on success. ### /v1/agent/check/fail/\ This endpoint is used with a check that is of the [TTL type](/docs/agent/checks.html). When this endpoint is accessed via a GET, the status of the check is set to `critical`, and the TTL clock is reset. The optional "?note=" query parameter can be used to associate a human-readable message with the status of the check. This will be passed through to the check's `Output` field in the check endpoints. The return code is 200 on success. ### /v1/agent/check/update/\ This endpoint is used with a check that is of the [TTL type](/docs/agent/checks.html). When this endpoint is accessed with a PUT, the status and output of the check are updated and the TTL clock is reset. This endpoint expects a JSON request body to be put. The request body must look like: ```javascript { "Status": "passing", "Output": "curl reported a failure:\n\n..." } ``` The `Status` field is mandatory, and must be set to "passing", "warning", or "critical". `Output` is an optional field that will associate a human-readable message with the status of the check, such as the output of the checking script or process. This will be truncated if it exceeds 4KB in size. This will be passed through to the check's `Output` field in the check endpoints. The return code is 200 on success. ### /v1/agent/service/register The register endpoint is used to add a new service, with an optional health check, to the local agent. There is more documentation on services [here](/docs/agent/services.html). The agent is responsible for managing the status of its local services, and for sending updates about its local services to the servers to keep the global Catalog in sync. The register endpoint expects a JSON request body to be PUT. The request body must look like: ```javascript { "ID": "redis1", "Name": "redis", "Tags": [ "master", "v1" ], "Address": "127.0.0.1", "Port": 8000, "Check": { "Script": "/usr/local/bin/check_redis.py", "HTTP": "http://localhost:5000/health", "Interval": "10s", "TTL": "15s" } } ``` The `Name` field is mandatory, If an `ID` is not provided, it is set to `Name`. You cannot have duplicate `ID` entries per agent, so it may be necessary to provide an ID in the case of a collision. `Tags`, `Address`, `Port` and `Check` are optional. If `Address` is not provided or left empty, then the agent's address will be used as the address for the service during DNS queries. When querying for services using HTTP endpoints such as [service health](/docs/agent/http/health.html#health_service) or [service catalog](/docs/agent/http/catalog.html#catalog_service) and encountering an empty `Address` field for a service, use the `Address` field of the agent node associated with that instance of the service, which is returned alongside the service information. If `Check` is provided, only one of `Script`, `HTTP`, or `TTL` should be specified. `Script` and `HTTP` also require `Interval`. The created check will be named "service:\". There is more information about checks [here](/docs/agent/checks.html). This endpoint supports [ACL tokens](/docs/internals/acl.html). If the query string includes a `?token=`, the registration will use the provided token to authorize the request. The token is also persisted in the agent's local configuration to enable periodic [anti-entropy](/docs/internals/anti-entropy.html) syncs and seamless agent restarts. The return code is 200 on success. ### /v1/agent/service/deregister/\ The deregister endpoint is used to remove a service from the local agent. The ServiceID must be passed after the slash. The agent will take care of deregistering the service with the Catalog. If there is an associated check, that is also deregistered. The return code is 200 on success. ### /v1/agent/service/maintenance/\ The service maintenance endpoint allows placing a given service into "maintenance mode". During maintenance mode, the service will be marked as unavailable and will not be present in DNS or API queries. This API call is idempotent. Maintenance mode is persistent and will be automatically restored on agent restart. The `?enable` flag is required. Acceptable values are either `true` (to enter maintenance mode) or `false` (to resume normal operation). The `?reason` flag is optional. If provided, its value should be a text string explaining the reason for placing the service into maintenance mode. This is simply to aid human operators. If no reason is provided, a default value will be used instead. The return code is 200 on success.