Commit Graph

60 Commits

Author SHA1 Message Date
Dan Upton 883ccc2a98
test: run Envoy integration tests against both servers and clients (#13610) 2022-06-28 13:15:45 +01:00
R.B. Boyer 33b497e7c9
peering: rename initiate to establish in the context of the APIs (#13419) 2022-06-10 11:10:46 -05:00
R.B. Boyer d81d8468db
peering: mesh gateways are required for cross-peer service mesh communication (#13410)
Require use of mesh gateways in order for service mesh data plane
traffic to flow between peers.

This also adds plumbing for envoy integration tests involving peers, and
one starter peering test.
2022-06-09 11:05:18 -05:00
Evan Culver 7889071385
connect: Update supported Envoy versions to include 1.19.3 and 1.18.6 2022-02-24 16:59:33 -08:00
Evan Culver 9f4d9f3f74
connect: Upgrade Envoy 1.20 to 1.20.2 (#12443) 2022-02-24 16:19:39 -08:00
freddygv 42d9542ac3 Add cross-partition integration test 2021-11-12 14:45:50 -07:00
Evan Culver b3c92f22b1
connect: Remove support for Envoy 1.16 (#11354) 2021-10-27 18:51:35 -07:00
Paul Banks 1f62bca08b Add basic integration test for Envoy ingress with SDS 2021-09-23 10:08:02 +01:00
R.B. Boyer 91bee6246f
Support Incremental xDS mode (#9855)
This adds support for the Incremental xDS protocol when using xDS v3. This is best reviewed commit-by-commit and will not be squashed when merged.

Union of all commit messages follows to give an overarching summary:

xds: exclusively support incremental xDS when using xDS v3

Attempts to use SoTW via v3 will fail, much like attempts to use incremental via v2 will fail.
Work around a strange older envoy behavior involving empty CDS responses over incremental xDS.
xds: various cleanups and refactors that don't strictly concern the addition of incremental xDS support

Dissolve the connectionInfo struct in favor of per-connection ResourceGenerators instead.
Do a better job of ensuring the xds code uses a well configured logger that accurately describes the connected client.
xds: pull out checkStreamACLs method in advance of a later commit

xds: rewrite SoTW xDS protocol tests to use protobufs rather than hand-rolled json strings

In the test we very lightly reuse some of the more boring protobuf construction helper code that is also technically under test. The important thing of the protocol tests is testing the protocol. The actual inputs and outputs are largely already handled by the xds golden output tests now so these protocol tests don't have to do double-duty.

This also updates the SoTW protocol test to exclusively use xDS v2 which is the only variant of SoTW that will be supported in Consul 1.10.

xds: default xds.Server.AuthCheckFrequency at use-time instead of construction-time
2021-04-29 13:54:05 -05:00
R.B. Boyer 6924586874
test: switch envoy integration tests to use pkill instead of ps+grep+awk+kill (#10097) 2021-04-23 13:23:33 -05:00
Yong Wen Chua 85aa7f2785
Merge branch 'master' of github.com:hashicorp/consul into tg-rewrite 2021-04-06 17:05:26 +08:00
R.B. Boyer 503041f216
xds: default to speaking xDS v3, but allow for v2 to be spoken upon request (#9658)
- Also add support for envoy 1.17.0
2021-02-26 16:23:15 -06:00
Yong Wen Chua e73781948d
Add integration test check 2021-02-24 16:24:32 +08:00
R.B. Boyer cdc5e99184
xds: remove deprecated usages of xDS (#9602)
Note that this does NOT upgrade to xDS v3. That will come in a future PR.

Additionally:

- Ignored staticcheck warnings about how github.com/golang/protobuf is deprecated.
- Shuffled some agent/xds imports in advance of a later xDS v3 upgrade.
- Remove support for envoy 1.13.x but don't add in 1.17.x yet. We have to wait until the xDS v3 support is added in a follow-up PR.

Fixes #8425
2021-02-22 15:00:15 -06:00
R.B. Boyer e87d2bb24f
xds: only try to create an ipv6 expose checks listener if ipv6 is supported by the kernel (#9765)
Fixes #9311

This only fails if the kernel has ipv6 hard-disabled. It is not sufficient to merely not provide an ipv6 address for a network interface.
2021-02-19 14:38:43 -06:00
Freddy 2763833d32
Add DC and NS support for Envoy metrics (#9207)
This PR updates the tags that we generate for Envoy stats.

Several of these come with breaking changes, since we can't keep two stats prefixes for a filter.
2020-11-16 16:37:19 -07:00
R.B. Boyer adff2316c9
test: use direct service registration in envoy integration tests (#9138)
This has the biggest impact on enterprise test cases that use namespaced
registrations, which prior to this change sometimes failed the initial
registration because the namespace was not yet created.
2020-11-09 13:59:46 -06:00
R.B. Boyer 9b37ea7dcb
Revert "Add namespace support for metrics (OSS) (#9117)" (#9124)
This reverts commit 06b3b017d326853dbb53bc0ec08ce371265c5ce9.
2020-11-06 10:24:32 -06:00
Freddy 874efe705f
Add namespace support for metrics (OSS) (#9117) 2020-11-05 18:24:29 -07:00
R.B. Boyer b8a623d3d2
wait_for_namespace should take two args (#9086) 2020-11-02 14:31:19 -06:00
Alvin Huang 102aefdb49
use hashicorp docker mirror in envoy helper (#9080) 2020-11-02 11:37:03 -06:00
R.B. Boyer cf5e9872ce
fix envoy integ test wait_for_namespace to actually work on CI (#9082) 2020-11-02 11:14:48 -06:00
R.B. Boyer c8c87ec317
agent: introduce path allow list for requests going through the metrics proxy (#9059)
Added a new option `ui_config.metrics_proxy.path_allowlist`. This defaults to `["/api/v1/query", "/api/v1/query_range"]` when the metrics provider is set to `prometheus`.

Requests that do not use one of the allow-listed paths (via exact match) get a 403 Forbidden response instead.
2020-10-30 16:49:54 -05:00
R.B. Boyer e3e1d687df
add namespace waiting function to envoy integration tests (#9051) 2020-10-28 11:58:40 -05:00
R.B. Boyer ed3a6bb59d
Fix even more test flakes in intentions related envoy integration tests (#9013)
The key thing here is to use `curl --no-keepalive` so that envoy
pre-1.15 tests will reliably use the latest listener every time.

Extra:

- Switched away from editing line-item intentions the legacy way.

- Removed some teardown scripts, as we don't share anything between cases anyway

- Removed unnecessary use of `run` in some places.
2020-10-26 17:04:35 -05:00
R.B. Boyer 846b80e8a5
fix flaky envoy integration tests involving intentions (#8996)
There is a delay between an intentions change being made, and it being
reflected in the Envoy runtime configuration. Now that the enforcement
happens inside of Envoy instead of over in the agent, our tests need to
explicitly wait until the xDS reconfiguration is complete before
attempting to assert intentions worked.

Also remove a few double retry loops.
2020-10-22 14:30:28 -05:00
R.B. Boyer 35c4efd220
connect: support defining intentions using layer 7 criteria (#8839)
Extend Consul’s intentions model to allow for request-based access control enforcement for HTTP-like protocols in addition to the existing connection-based enforcement for unspecified protocols (e.g. tcp).
2020-10-06 17:09:13 -05:00
R.B. Boyer f2b8bf109c
xds: use envoy's rbac filter to handle intentions entirely within envoy (#8569) 2020-08-27 12:20:58 -05:00
R.B. Boyer 6e3d07c995
xds: version sniff envoy and switch regular expressions from 'regex' to 'safe_regex' on newer envoy versions (#8222)
- cut down on extra node metadata transmission
- split the golden file generation to compare all envoy version
2020-07-09 17:04:51 -05:00
Freddy f759a48726
Enable gateways to resolve hostnames to IPv4 addresses (#7999)
The DNS resolution will be handled by Envoy and defaults to LOGICAL_DNS. This discovery type can be overridden on a per-gateway basis with the envoy_dns_discovery_type Gateway Option.

If a service contains an instance with a hostname as an address we set the Envoy cluster to use DNS as the discovery type rather than EDS. Since both mesh gateways and terminating gateways route to clusters using SNI, whenever there is a mix of hostnames and IP addresses associated with a service we use the hostname + CDS rather than the IPs + EDS.

Note that we detect hostnames by attempting to parse the service instance's address as an IP. If it is not a valid IP we assume it is a hostname.
2020-06-03 15:28:45 -06:00
Daniel Nephin dcc76f8774
Make envoy integration tests a `go test` suite (#7842)
* test/integration: only run against 1 envoy version

These tests are slow enough that it seems unlikely that anyone is
running multiple versions locally. If someone wants to, a for loop
outside of run_test.sh should do the right thing.

Remove unused vars.

* Remove logic to iterate over test cases, run a single case

* Add a golang runner for integration tests

* Use build tags for envoy integration tests

And add junit-xml report
2020-05-19 14:00:00 -04:00
Kyle Havlovitz 28b4819882
Merge pull request #7759 from hashicorp/ingress/tls-hosts
Add TLS option for Ingress Gateway listeners
2020-05-11 09:18:43 -07:00
Daniel Nephin ce3aeb85f5 Add outlier_detection check to integration test
Fix decoding of time.Duration types.
2020-05-08 14:56:57 -04:00
Kyle Havlovitz c194e707e6 Add TLS integration test for ingress gateway
- Pull Consul Root CA from API in order to verify certificate chain
- Assert on the DNSSAN as well to ensure it is correct
2020-05-06 15:12:02 -05:00
Chris Piraino 210dda5682 Allow Hosts field to be set on an ingress config entry
- Validate that this cannot be set on a 'tcp' listener nor on a wildcard
service.
- Add Hosts field to api and test in consul config write CLI
- xds: Configure envoy with user-provided hosts from ingress gateways
2020-05-06 15:06:13 -05:00
Kyle Havlovitz 6a5eba63ab
Ingress Gateways for TCP services (#7509)
* Implements a simple, tcp ingress gateway workflow

This adds a new type of gateway for allowing Ingress traffic into Connect from external services.

Co-authored-by: Chris Piraino <cpiraino@hashicorp.com>
2020-04-16 14:00:48 -07:00
Pierre Souchay a3da31c86a More tolerant assert_alive_wan_member_count to fix unstable tests
Example of failure (very frequent):
https://circleci.com/gh/hashicorp/consul/157985
2020-04-13 16:02:45 +02:00
Hans Hasselberg f49144fcee
connect: support for envoy 1.13.1 and 1.12.3 (#7380)
* setup new envoy versions for CI
* bump version on the website too.
2020-03-10 11:04:46 +01:00
R.B. Boyer a7fb26f50f
wan federation via mesh gateways (#6884)
This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch:

There are several distinct chunks of code that are affected:

* new flags and config options for the server

* retry join WAN is slightly different

* retry join code is shared to discover primary mesh gateways from secondary datacenters

* because retry join logic runs in the *agent* and the results of that
  operation for primary mesh gateways are needed in the *server* there are
  some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur
  at multiple layers of abstraction just to pass the data down to the right
  layer.

* new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers

* the function signature for RPC dialing picked up a new required field (the
  node name of the destination)

* several new RPCs for manipulating a FederationState object:
  `FederationState:{Apply,Get,List,ListMeshGateways}`

* 3 read-only internal APIs for debugging use to invoke those RPCs from curl

* raft and fsm changes to persist these FederationStates

* replication for FederationStates as they are canonically stored in the
  Primary and replicated to the Secondaries.

* a special derivative of anti-entropy that runs in secondaries to snapshot
  their local mesh gateway `CheckServiceNodes` and sync them into their upstream
  FederationState in the primary (this works in conjunction with the
  replication to distribute addresses for all mesh gateways in all DCs to all
  other DCs)

* a "gateway locator" convenience object to make use of this data to choose
  the addresses of gateways to use for any given RPC or gossip operation to a
  remote DC. This gets data from the "retry join" logic in the agent and also
  directly calls into the FSM.

* RPC (`:8300`) on the server sniffs the first byte of a new connection to
  determine if it's actually doing native TLS. If so it checks the ALPN header
  for protocol determination (just like how the existing system uses the
  type-byte marker).

* 2 new kinds of protocols are exclusively decoded via this native TLS
  mechanism: one for ferrying "packet" operations (udp-like) from the gossip
  layer and one for "stream" operations (tcp-like). The packet operations
  re-use sockets (using length-prefixing) to cut down on TLS re-negotiation
  overhead.

* the server instances specially wrap the `memberlist.NetTransport` when running
  with gateway federation enabled (in a `wanfed.Transport`). The general gist is
  that if it tries to dial a node in the SAME datacenter (deduced by looking
  at the suffix of the node name) there is no change. If dialing a DIFFERENT
  datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh
  gateways to eventually end up in a server's :8300 port.

* a new flag when launching a mesh gateway via `consul connect envoy` to
  indicate that the servers are to be exposed. This sets a special service
  meta when registering the gateway into the catalog.

* `proxycfg/xds` notice this metadata blob to activate additional watches for
  the FederationState objects as well as the location of all of the consul
  servers in that datacenter.

* `xds:` if the extra metadata is in place additional clusters are defined in a
  DC to bulk sink all traffic to another DC's gateways. For the current
  datacenter we listen on a wildcard name (`server.<dc>.consul`) that load
  balances all servers as well as one mini-cluster per node
  (`<node>.server.<dc>.consul`)

* the `consul tls cert create` command got a new flag (`-node`) to help create
  an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 15:59:02 -05:00
Matt Keeler 31dde765bf
Change where the envoy snapshots get put when a test fails (#7298)
This will allow us to capture them in CI
2020-03-05 16:01:10 -05:00
Hans Hasselberg 4ae725cab2
add envoy version 1.12.2 and 1.13.0 to the matrix (#7240)
* add 1.12.2

* add envoy 1.13.0

* Introduce -envoy-version to get 1.10.0 passing.

* update old version and fix consul-exec case

* add envoy_version and fix check

* Update Envoy CLI tests to account for the 1.13 compatibility changes.

Co-authored-by: Matt Keeler <mkeeler@users.noreply.github.com>
2020-02-10 14:53:04 -05:00
Paschalis Tsilias 1b81cccbf9
Expose Envoy's /stats for statsd agents (#7173)
* Expose Envoy /stats for statsd agents; Add testcases

* Remove merge conflict leftover

* Add support for prefix instead of path; Fix docstring to mirror these changes

* Add new config field to docs; Add testcases to check that /stats/prometheus is exposed as well

* Parametrize matchType (prefix or path) and value

* Update website/source/docs/connect/proxies/envoy.md

Co-Authored-By: Paul Banks <banks@banksco.de>

Co-authored-by: Paul Banks <banks@banksco.de>
2020-02-03 17:19:34 +00:00
Matt Keeler 25568626f7
Fix a couple bugs regarding intentions with namespaces (#7169) 2020-01-29 17:30:38 -05:00
Matt Keeler 485a0a65ea
Updates to Config Entries and Connect for Namespaces (#7116) 2020-01-24 10:04:58 -05:00
Chris Piraino 2a95701341
Allow configuration of upstream connection limits in Envoy (#6829)
* Adds 'limits' field to the upstream configuration of a connect proxy

This allows a user to configure the envoy connect proxy with
'max_connections', 'max_queued_requests', and 'max_concurrent_requests'. These
values are defined in the local proxy on a per-service instance basis
and should thus NOT be thought of as a global-level or even service-level value.
2019-12-03 14:13:33 -06:00
R.B. Boyer 9adc39cce0
tests: make envoy integration tests more tolerant of internal retries that may inflate counters (#6539)
This should remove false positives that look like:

    cluster.s2.default.primary.*cx_total - expected count: 2, actual count: 3
2019-09-25 09:08:42 -05:00
R.B. Boyer 64fc002e03
connect: fix failover through a mesh gateway to a remote datacenter (#6259)
Failover is pushed entirely down to the data plane by creating envoy
clusters and putting each successive destination in a different load
assignment priority band. For example this shows that normally requests
go to 1.2.3.4:8080 but when that fails they go to 6.7.8.9:8080:

- name: foo
  load_assignment:
    cluster_name: foo
    policy:
      overprovisioning_factor: 100000
    endpoints:
    - priority: 0
      lb_endpoints:
      - endpoint:
          address:
            socket_address:
              address: 1.2.3.4
              port_value: 8080
    - priority: 1
      lb_endpoints:
      - endpoint:
          address:
            socket_address:
              address: 6.7.8.9
              port_value: 8080

Mesh gateways route requests based solely on the SNI header tacked onto
the TLS layer. Envoy currently only lets you configure the outbound SNI
header at the cluster layer.

If you try to failover through a mesh gateway you ideally would
configure the SNI value per endpoint, but that's not possible in envoy
today.

This PR introduces a simpler way around the problem for now:

1. We identify any target of failover that will use mesh gateway mode local or
   remote and then further isolate any resolver node in the compiled discovery
   chain that has a failover destination set to one of those targets.

2. For each of these resolvers we will perform a small measurement of
   comparative healths of the endpoints that come back from the health API for the
   set of primary target and serial failover targets. We walk the list of targets
   in order and if any endpoint is healthy we return that target, otherwise we
   move on to the next target.

3. The CDS and EDS endpoints both perform the measurements in (2) for the
   affected resolver nodes.

4. For CDS this measurement selects which TLS SNI field to use for the cluster
   (note the cluster is always going to be named for the primary target)

5. For EDS this measurement selects which set of endpoints will populate the
   cluster. Priority tiered failover is ignored.

One of the big downsides to this approach to failover is that the failover
detection and correction is going to be controlled by consul rather than
deferring that entirely to the data plane as with the prior version. This also
means that we are bound to only failover using official health signals and
cannot make use of data plane signals like outlier detection to affect
failover.

In this specific scenario the lack of data plane signals is ok because the
effectiveness is already muted by the fact that the ultimate destination
endpoints will have their data plane signals scrambled when they pass through
the mesh gateway wrapper anyway so we're not losing much.

Another related fix is that we now use the endpoint health from the
underlying service, not the health of the gateway (regardless of
failover mode).
2019-08-05 13:30:35 -05:00
Matt Keeler 155cdf022f
Envoy Mesh Gateway integration tests (#6187)
* Allow setting the mesh gateway mode for an upstream in config files

* Add envoy integration test for mesh gateways

This necessitated many supporting changes in most of the other test cases.

Add remote mode mesh gateways integration test
2019-07-24 17:01:42 -04:00
R.B. Boyer 2bfad66efa
connect: rework how the service resolver subset OnlyPassing flag works (#6173)
The main change is that we no longer filter service instances by health,
preferring instead to render all results down into EDS endpoints in
envoy and merely label the endpoints as HEALTHY or UNHEALTHY.

When OnlyPassing is set to true we will force consul checks in a
'warning' state to render as UNHEALTHY in envoy.

Fixes #6171
2019-07-23 20:20:24 -05:00
R.B. Boyer e060748d3f
tests: adding new envoy integration tests for L7 service-resolvers (#6129)
Additionally:

- wait for bootstrap config entries to be applied

- run the verify container in the host's PID namespace so we can kill
envoys without mounting the docker socket

* assert that we actually send HEALTHY and UNHEALTHY endpoints down in EDS during failover
2019-07-23 20:08:36 -05:00