* backport of commit d77048f1ea7136af9f627182bc79126f9472a060
* backport of commit 301de5980e7fcc8d68d16e6cdcbd5b2afea73711
* backport of commit 436bcda5ec58abbc5a65f6d244a1e1ec26beb46c
---------
Co-authored-by: Ronald Ekambi <ronekambi@gmail.com>
* backport of commit fb2f3b61004d9ef2296b51306ddbf5b6d72679ed
* backport of commit 178abb8495ba4bb35c29a835965e3f244a385865
* backport of commit 77b399877413c6e65669659deb8962c2cc5b52f6
* backport of commit a245b326ac030f7ef3292e7bbdb58e0b2850a12f
---------
Co-authored-by: Andrew Stucki <andrew.stucki@hashicorp.com>
Sameness groups with default-for-failover enabled did not function properly with
tproxy whenever all instances of the service disappeared from the local cluster.
This occured, because there were no corresponding resolvers (due to the implicit
failover policy) which caused VIPs to be deallocated.
This ticket expands upon the VIP allocations so that both service-defaults and
service-intentions (without destination wildcards) will ensure that the virtual
IP exists.
* perf: Remove expensive reflection from raft/mesh hot path
Replaces a reflection-based copy of a struct in the mesh topology with a
deep-copy generated implementation.
This is in the hot-path of raft FSM updates, and the reflection overhead was a
substantial part of mesh registration times (~90%). This could manifest as raft
thread saturation, and resulting instability.
Co-authored-by: Joel Brandhorst <joel.brandhorst@gmail.com>
* add changelog
---------
Co-authored-by: Joel Brandhorst <joel.brandhorst@gmail.com>
Co-authored-by: John Murret <john.murret@hashicorp.com>
This will likely happen frequently with sameness groups. Relaxing this
constraint is harmless for failover because xds/endpoints exludes cross
partition and peer endpoints.
* Add v1/internal/service-virtual-ip for manually setting service VIPs
* Attach service virtual IP info to compiled discovery chain
* Separate auto-assigned and manual VIPs in response
* added method for converting SamenessGroupConfigEntry
- added new method `ToQueryFailoverTargets` for converting a SamenessGroupConfigEntry's members to a list of QueryFailoverTargets
- renamed `ToFailoverTargets` ToServiceResolverFailoverTargets to distinguish it from `ToQueryFailoverTargets`
* Added SamenessGroup to PreparedQuery
- exposed Service.Partition to API when defining a prepared query
- added a method for determining if a QueryFailoverOptions is empty
- This will be useful for validation
- added unit tests
* added method for retrieving a SamenessGroup to state store
* added logic for using PQ with SamenessGroup
- added branching path for SamenessGroup handling in execute. It will be handled separate from the normal PQ case
- added a new interface so that the `GetSamenessGroupFailoverTargets` can be properly tested
- separated the execute logic into a `targetSelector` function so that it can be used for both failover and sameness group PQs
- split OSS only methods into new PQ OSS files
- added validation that `samenessGroup` is an enterprise only feature
* added documentation for PQ SamenessGroup
Before this change, we were not fetching service resolvers (and therefore
service defaults) configuration entries for services on members of sameness
groups.
This implements permissive mTLS , which allows toggling services into "permissive" mTLS mode.
Permissive mTLS mode allows incoming "non Consul-mTLS" traffic to be forward unmodified to the application.
* Update service-defaults and proxy-defaults config entries with a MutualTLSMode field
* Update the mesh config entry with an AllowEnablingPermissiveMutualTLS field and implement the necessary validation. AllowEnablingPermissiveMutualTLS must be true to allow changing to MutualTLSMode=permissive, but this does not require that all proxy-defaults and service-defaults are currently in strict mode.
* Update xDS listener config to add a "permissive filter chain" when MutualTLSMode=permissive for a particular service. The permissive filter chain matches incoming traffic by the destination port. If the destination port matches the service port from the catalog, then no mTLS is required and the traffic sent is forwarded unmodified to the application.
- added Sameness Group to config entries
- added Sameness Group to subscriptions
* generated proto files
* added Sameness Group events to the state store
- added test cases
* Refactored health RPC Client
- moved code that is common to rpcclient under rpcclient common.go. This will help set us up to support future RPC clients
* Refactored proxycfg glue views
- Moved views to rpcclient config entry. This will allow us to reuse this code for a config entry client
* added config entry RPC Client
- Copied most of the testing code from rpcclient/health
* hooked up new rpcclient in agent
* fixed documentation and comments for clarity
* Add a test to reproduce the race condition
* Fix race condition by publishing the event after the commit and adding a lock to prevent out of order events.
* split publish to generate the list of events before committing the transaction.
* add changelog
* remove extra func
* Apply suggestions from code review
Co-authored-by: Dan Upton <daniel@floppy.co>
* add comment to explain test
---------
Co-authored-by: Dan Upton <daniel@floppy.co>
This PR adds the sameness-group field to exported-service
config entries, which allows for services to be exported
to multiple destination partitions / peers easily.
This commit adds a sameness-group config entry to the API and structs packages. It includes some validation logic and a new memdb index that tracks the default sameness-group for each partition. Sameness groups will simplify the effort of managing failovers / intentions / exports for peers and partitions.
Note that this change purely to introduce the configuration entry and does not include the full functionality of sameness-groups.
Prior to this commit, all peer services were transmitted as connect-enabled
as long as a one or more mesh-gateways were healthy. With this change, there
is now a difference between typical services and connect services transmitted
via peering.
A service will be reported as "connect-enabled" as long as any of these
conditions are met:
1. a connect-proxy sidecar is registered for the service name.
2. a connect-native instance of the service is registered.
3. a service resolver / splitter / router is registered for the service name.
4. a terminating gateway has registered the service.
Protobuf Refactoring for Multi-Module Cleanliness
This commit includes the following:
Moves all packages that were within proto/ to proto/private
Rewrites imports to account for the packages being moved
Adds in buf.work.yaml to enable buf workspaces
Names the proto-public buf module so that we can override the Go package imports within proto/buf.yaml
Bumps the buf version dependency to 1.14.0 (I was trying out the version to see if it would get around an issue - it didn't but it also doesn't break things and it seemed best to keep up with the toolchain changes)
Why:
In the future we will need to consume other protobuf dependencies such as the Google HTTP annotations for openapi generation or grpc-gateway usage.
There were some recent changes to have our own ratelimiting annotations.
The two combined were not working when I was trying to use them together (attempting to rebase another branch)
Buf workspaces should be the solution to the problem
Buf workspaces means that each module will have generated Go code that embeds proto file names relative to the proto dir and not the top level repo root.
This resulted in proto file name conflicts in the Go global protobuf type registry.
The solution to that was to add in a private/ directory into the path within the proto/ directory.
That then required rewriting all the imports.
Is this safe?
AFAICT yes
The gRPC wire protocol doesn't seem to care about the proto file names (although the Go grpc code does tack on the proto file name as Metadata in the ServiceDesc)
Other than imports, there were no changes to any generated code as a result of this.
* Stub proxycfg handler for API gateway
* Add Service Kind constants/handling for API Gateway
* Begin stubbing for SDS
* Add new Secret type to xDS order of operations
* Continue stubbing of SDS
* Iterate on proxycfg handler for API gateway
* Handle BoundAPIGateway config entry subscription in proxycfg-glue
* Add API gateway to config snapshot validation
* Add API gateway to config snapshot clone, leaf, etc.
* Subscribe to bound route + cert config entries on bound-api-gateway
* Track routes + certs on API gateway config snapshot
* Generate DeepCopy() for types used in watch.Map
* Watch all active references on api-gateway, unwatch inactive
* Track loading of initial bound-api-gateway config entry
* Use proper proto package for SDS mapping
* Use ResourceReference instead of ServiceName, collect resources
* Fix typo, add + remove TODOs
* Watch discovery chains for TCPRoute
* Add TODO for updating gateway services for api-gateway
* make proto
* Regenerate deep-copy for proxycfg
* Set datacenter on upstream ID from query source
* Watch discovery chains for http-route service backends
* Add ServiceName getter to HTTP+TCP Service structs
* Clean up unwatched discovery chains on API Gateway
* Implement watch for ingress leaf certificate
* Collect upstreams on http-route + tcp-route updates
* Remove unused GatewayServices update handler
* Remove unnecessary gateway services logic for API Gateway
* Remove outdate TODO
* Use .ToIngress where appropriate, including TODO for cleaning up
* Cancel before returning error
* Remove GatewayServices subscription
* Add godoc for handlerAPIGateway functions
* Update terminology from Connect => Consul Service Mesh
Consistent with terminology changes in https://github.com/hashicorp/consul/pull/12690
* Add missing TODO
* Remove duplicate switch case
* Rerun deep-copy generator
* Use correct property on config snapshot
* Remove unnecessary leaf cert watch
* Clean up based on code review feedback
* Note handler properties that are initialized but set elsewhere
* Add TODO for moving helper func into structs pkg
* Update generated DeepCopy code
* gofmt
* Generate DeepCopy() for API gateway listener types
* Improve variable name
* Regenerate DeepCopy() code
* Fix linting issue
* Temporarily remove the secret type from resource generation
This endpoint shows total services, connect service instances and
billable service instances in the local datacenter or globally. Billable
instances = total service instances - connect services - consul server instances.
* remove legacy tokens
* remove lingering legacy token references from docs
* update language and naming for token secrets and accessor IDs
* updates all tokenID references to clarify accessorID
* remove token type references and lookup tokens by accessorID index
* remove unnecessary constants
* replace additional tokenID param names
* Add warning info for deprecated -id parameter
Co-authored-by: Paul Glass <pglass@hashicorp.com>
* Update field comment
Co-authored-by: Paul Glass <pglass@hashicorp.com>
---------
Co-authored-by: Paul Glass <pglass@hashicorp.com>
* Add Peer field to service-defaults upstream overrides.
* add api changes, compat mode for service default overrides
* Fixes based on testing
---------
Co-authored-by: DanStough <dan.stough@hashicorp.com>
* remove legacy tokens
* Update test comment
Co-authored-by: Paul Glass <pglass@hashicorp.com>
* fix imports
* update docs for additional CLI changes
* add test case for anonymous token
* set deprecated api fields to json ignore and fix patch errors
* update changelog to breaking-change
* fix import
* update api docs to remove legacy reference
* fix docs nav data
---------
Co-authored-by: Paul Glass <pglass@hashicorp.com>
* Stub Config Entries for Consul Native API Gateway (#15644)
* Add empty InlineCertificate struct and protobuf
* apigateway stubs
* Stub HTTPRoute in api pkg
* Stub HTTPRoute in structs pkg
* Simplify api.APIGatewayConfigEntry to be consistent w/ other entries
* Update makeConfigEntry switch, add docstring for HTTPRouteConfigEntry
* Add TCPRoute to MakeConfigEntry, return unique Kind
* Stub BoundAPIGatewayConfigEntry in agent
* Add RaftIndex to APIGatewayConfigEntry stub
* Add new config entry kinds to validation allow-list
* Add RaftIndex to other added config entry stubs
* Update usage metrics assertions to include new cfg entries
* Add Meta and acl.EnterpriseMeta to all new ConfigEntry types
* Remove unnecessary Services field from added config entry types
* Implement GetMeta(), GetEnterpriseMeta() for added config entry types
* Add meta field to proto, name consistently w/ existing config entries
* Format config_entry.proto
* Add initial implementation of CanRead + CanWrite for new config entry types
* Add unit tests for decoding of new config entry types
* Add unit tests for parsing of new config entry types
* Add unit tests for API Gateway config entry ACLs
* Return typed PermissionDeniedError on BoundAPIGateway CanWrite
* Add unit tests for added config entry ACLs
* Add BoundAPIGateway type to AllConfigEntryKinds
* Return proper kind from BoundAPIGateway
* Add docstrings for new config entry types
* Add missing config entry kinds to proto def
* Update usagemetrics_oss_test.go
* Use utility func for returning PermissionDeniedError
* EventPublisher subscriptions for Consul Native API Gateway (#15757)
* Create new event topics in subscribe proto
* Add tests for PBSubscribe func
* Make configs singular, add all configs to PBToStreamSubscribeRequest
* Add snapshot methods
* Add config_entry_events tests
* Add config entry kind to topic for new configs
* Add unit tests for snapshot methods
* Start adding integration test
* Test using the new controller code
* Update agent/consul/state/config_entry_events.go
* Check value of error
* Add controller stubs for API Gateway (#15837)
* update initial stub implementation
* move files, clean up mutex references
* Remove embed, use idiomatic names for constructors
* Remove stray file introduced in merge
* Add APIGateway validation (#15847)
* Add APIGateway validation
* Add additional validations
* Add cert ref validation
* Add protobuf definitions
* Fix up field types
* Add API structs
* Move struct fields around a bit
* APIGateway InlineCertificate validation (#15856)
* Add APIGateway validation
* Add additional validations
* Add protobuf definitions
* Tabs to spaces
* Add API structs
* Move struct fields around a bit
* Add validation for InlineCertificate
* Fix ACL test
* APIGateway BoundAPIGateway validation (#15858)
* Add APIGateway validation
* Add additional validations
* Add cert ref validation
* Add protobuf definitions
* Fix up field types
* Add API structs
* Move struct fields around a bit
* Add validation for BoundAPIGateway
* APIGateway TCPRoute validation (#15855)
* Add APIGateway validation
* Add additional validations
* Add cert ref validation
* Add protobuf definitions
* Fix up field types
* Add API structs
* Add TCPRoute normalization and validation
* Add forgotten Status
* Add some more field docs in api package
* Fix test
* Format imports
* Rename snapshot test variable names
* Add plumbing for Native API GW Subscriptions (#16003)
Co-authored-by: Sarah Alsmiller <sarah.alsmiller@hashicorp.com>
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
Co-authored-by: sarahalsmiller <100602640+sarahalsmiller@users.noreply.github.com>
Co-authored-by: Andrew Stucki <andrew.stucki@hashicorp.com>
* Protobuf Modernization
Remove direct usage of golang/protobuf in favor of google.golang.org/protobuf
Marshallers (protobuf and json) needed some changes to account for different APIs.
Moved to using the google.golang.org/protobuf/types/known/* for the well known types including replacing some custom Struct manipulation with whats available in the structpb well known type package.
This also updates our devtools script to install protoc-gen-go from the right location so that files it generates conform to the correct interfaces.
* Fix go-mod-tidy make target to work on all modules
There are a few changes that needed to be made to to handle authorizing
reads for imported data:
- If the data was imported from a peer we should not attempt to read the
data using the traditional authz rules. This is because the name of
services/nodes in a peer cluster are not equivalent to those of the
importing cluster.
- If the data was imported from a peer we need to check whether the
token corresponds to a service, meaning that it has service:write
permissions, or to a local read only token that can read all
nodes/services in a namespace.
This required changes at the policyAuthorizer level, since that is the
only view available to OSS Consul, and at the enterprise
partition/namespace level.
hc-github-team-consul-core