Commit Graph

38 Commits

Author SHA1 Message Date
FFMMM 1f8fb17be7
Vendor in rpc mono repo for net/rpc fork, go-msgpack, msgpackrpc. (#12311)
This commit syncs ENT changes to the OSS repo.

Original commit details in ENT:

```
commit 569d25f7f4578981c3801e6e067295668210f748
Author: FFMMM <FFMMM@users.noreply.github.com>
Date:   Thu Feb 10 10:23:33 2022 -0800

    Vendor fork net rpc (#1538)

    * replace net/rpc w consul-net-rpc/net/rpc

    Signed-off-by: FFMMM <FFMMM@users.noreply.github.com>

    * replace msgpackrpc and go-msgpack with fork from mono repo

    Signed-off-by: FFMMM <FFMMM@users.noreply.github.com>

    * gofmt all files touched

    Signed-off-by: FFMMM <FFMMM@users.noreply.github.com>
```

Signed-off-by: FFMMM <FFMMM@users.noreply.github.com>
2022-02-14 09:45:45 -08:00
Kyle Havlovitz db88f95fbe consul: add virtual IP generation for connect services 2021-12-02 15:42:47 -08:00
Daniel Nephin 15cd8c7ab8 Remove incorrect TODO 2021-10-25 17:20:06 -04:00
Daniel Nephin 589b238374 acl: move the legacy ACL struct to the one package where it is used
It is now only used for restoring snapshots. We can remove it in phase 2.
2021-10-25 17:20:06 -04:00
Daniel Nephin 0ba5d0afcd acl: remove most of the rest of structs/acl_legacy.go 2021-10-25 17:20:06 -04:00
Daniel Nephin 2995ac61f2 acl: remove the last of the legacy FSM
Replace it with an implementation that returns an error, and rename some symbols
to use a Deprecated suffix to make it clear.

Also remove the ACLRequest struct, which is no longer referenced.
2021-09-29 12:42:23 -04:00
R.B. Boyer e50e13d2ab
state: partition nodes and coordinates in the state store (#10859)
Additionally:

- partitioned the catalog indexes appropriately for partitioning
- removed a stray reference to a non-existent index named "node.checks"
2021-08-17 13:29:39 -05:00
R.B. Boyer c271976445
state: refactor some node/coordinate state store functions to take an EnterpriseMeta (#10687)
Note the field is not used yet.
2021-07-23 13:42:23 -05:00
Daniel Nephin 2a10f01bf5 snapshot: fix saving of auth methods
Previously only a single auth method would be saved to the snapshot. This commit fixes the typo
and adds to the test, to show that all auth methods are now saved.
2021-04-14 16:51:21 -04:00
Matt Keeler 755fb72994
Switch to using the external autopilot module 2020-11-09 09:22:11 -05:00
s-christoff a62705101f
Enhance the output of consul snapshot inspect (#8787) 2020-10-09 14:57:29 -05:00
R.B. Boyer d6dce2332a
connect: intentions are now managed as a new config entry kind "service-intentions" (#8834)
- Upgrade the ConfigEntry.ListAll RPC to be kind-aware so that older
copies of consul will not see new config entries it doesn't understand
replicate down.

- Add shim conversion code so that the old API/CLI method of interacting
with intentions will continue to work so long as none of these are
edited via config entry endpoints. Almost all of the read-only APIs will
continue to function indefinitely.

- Add new APIs that operate on individual intentions without IDs so that
the UI doesn't need to implement CAS operations.

- Add a new serf feature flag indicating support for
intentions-as-config-entries.

- The old line-item intentions way of interacting with the state store
will transparently flip between the legacy memdb table and the config
entry representations so that readers will never see a hiccup during
migration where the results are incomplete. It uses a piece of system
metadata to control the flip.

- The primary datacenter will begin migrating intentions into config
entries on startup once all servers in the datacenter are on a version
of Consul with the intentions-as-config-entries feature flag. When it is
complete the old state store representations will be cleared. We also
record a piece of system metadata indicating this has occurred. We use
this metadata to skip ALL of this code the next time the leader starts
up.

- The secondary datacenters continue to run the old intentions
replicator until all servers in the secondary DC and primary DC support
intentions-as-config-entries (via serf flag). Once this condition it met
the old intentions replicator ceases.

- The secondary datacenters replicate the new config entries as they are
migrated in the primary. When they detect that the primary has zeroed
it's old state store table it waits until all config entries up to that
point are replicated and then zeroes its own copy of the old state store
table. We also record a piece of system metadata indicating this has
occurred. We use this metadata to skip ALL of this code the next time
the leader starts up.
2020-10-06 13:24:05 -05:00
R.B. Boyer a77b518542
server: create new memdb table for storing system metadata (#8703)
This adds a new very tiny memdb table and corresponding raft operation
for updating a very small effective map[string]string collection of
"system metadata". This can persistently record a fact about the Consul
state machine itself.

The first use of this feature will come in a later PR.
2020-10-06 10:08:37 -05:00
Kyle Havlovitz 2601585017 fsm: Fix snapshot bug with restoring node/service/check indexes 2020-08-11 11:49:52 -07:00
Hans Hasselberg bec21c849d
Tokens converted from legacy ACLs get their Hash computed (#8047)
* Fixes #5606: Tokens converted from legacy ACLs get their Hash computed

This allows new style token replication to work for legacy tokens as well when they change.

* tests: fix timestamp comparison

Co-authored-by: Matt Keeler <mjkeeler7@gmail.com>
2020-06-08 21:44:06 +02:00
R.B. Boyer a7fb26f50f
wan federation via mesh gateways (#6884)
This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch:

There are several distinct chunks of code that are affected:

* new flags and config options for the server

* retry join WAN is slightly different

* retry join code is shared to discover primary mesh gateways from secondary datacenters

* because retry join logic runs in the *agent* and the results of that
  operation for primary mesh gateways are needed in the *server* there are
  some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur
  at multiple layers of abstraction just to pass the data down to the right
  layer.

* new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers

* the function signature for RPC dialing picked up a new required field (the
  node name of the destination)

* several new RPCs for manipulating a FederationState object:
  `FederationState:{Apply,Get,List,ListMeshGateways}`

* 3 read-only internal APIs for debugging use to invoke those RPCs from curl

* raft and fsm changes to persist these FederationStates

* replication for FederationStates as they are canonically stored in the
  Primary and replicated to the Secondaries.

* a special derivative of anti-entropy that runs in secondaries to snapshot
  their local mesh gateway `CheckServiceNodes` and sync them into their upstream
  FederationState in the primary (this works in conjunction with the
  replication to distribute addresses for all mesh gateways in all DCs to all
  other DCs)

* a "gateway locator" convenience object to make use of this data to choose
  the addresses of gateways to use for any given RPC or gossip operation to a
  remote DC. This gets data from the "retry join" logic in the agent and also
  directly calls into the FSM.

* RPC (`:8300`) on the server sniffs the first byte of a new connection to
  determine if it's actually doing native TLS. If so it checks the ALPN header
  for protocol determination (just like how the existing system uses the
  type-byte marker).

* 2 new kinds of protocols are exclusively decoded via this native TLS
  mechanism: one for ferrying "packet" operations (udp-like) from the gossip
  layer and one for "stream" operations (tcp-like). The packet operations
  re-use sockets (using length-prefixing) to cut down on TLS re-negotiation
  overhead.

* the server instances specially wrap the `memberlist.NetTransport` when running
  with gateway federation enabled (in a `wanfed.Transport`). The general gist is
  that if it tries to dial a node in the SAME datacenter (deduced by looking
  at the suffix of the node name) there is no change. If dialing a DIFFERENT
  datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh
  gateways to eventually end up in a server's :8300 port.

* a new flag when launching a mesh gateway via `consul connect envoy` to
  indicate that the servers are to be exposed. This sets a special service
  meta when registering the gateway into the catalog.

* `proxycfg/xds` notice this metadata blob to activate additional watches for
  the FederationState objects as well as the location of all of the consul
  servers in that datacenter.

* `xds:` if the extra metadata is in place additional clusters are defined in a
  DC to bulk sink all traffic to another DC's gateways. For the current
  datacenter we listen on a wildcard name (`server.<dc>.consul`) that load
  balances all servers as well as one mini-cluster per node
  (`<node>.server.<dc>.consul`)

* the `consul tls cert create` command got a new flag (`-node`) to help create
  an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 15:59:02 -05:00
R.B. Boyer 5a505c5b3a acl: adding support for kubernetes auth provider login (#5600)
* auth providers
* binding rules
* auth provider for kubernetes
* login/logout
2019-04-26 14:49:25 -05:00
R.B. Boyer 9542fdc9bc acl: adding Roles to Tokens (#5514)
Roles are named and can express the same bundle of permissions that can
currently be assigned to a Token (lists of Policies and Service
Identities). The difference with a Role is that it not itself a bearer
token, but just another entity that can be tied to a Token.

This lets an operator potentially curate a set of smaller reusable
Policies and compose them together into reusable Roles, rather than
always exploding that same list of Policies on any Token that needs
similar permissions.

This also refactors the acl replication code to be semi-generic to avoid
3x copypasta.
2019-04-26 14:49:12 -05:00
R.B. Boyer 76321aa952 acl: tokens can be created with an optional expiration time (#5353) 2019-04-26 14:47:51 -05:00
Kyle Havlovitz 63c9434779 Cleaned up some error handling/comments around config entries 2019-04-02 15:42:12 -07:00
Kyle Havlovitz ace5c7a1cb Encode config entry FSM messages in a generic type 2019-03-28 00:06:56 -07:00
Kyle Havlovitz c2cba68042 Fix fsm serialization and add snapshot/restore 2019-03-20 16:13:13 -07:00
Kyle Havlovitz e7946197b8 connect/ca: prevent blank CA config in snapshot
This PR both prevents a blank CA config from being written out to
a snapshot and allows Consul to gracefully recover from a snapshot
with an invalid CA config.

Fixes #4954.
2018-12-06 17:40:53 -08:00
R.B. Boyer 8662a6d260
acl: add stub hooks to support some plumbing in enterprise (#4951) 2018-11-13 15:35:54 -06:00
Kyle Havlovitz 5b7b8bf842
Merge pull request #4872 from hashicorp/node-snapshot-fix
Node ID/datacenter snapshot fix
2018-10-31 15:51:07 -07:00
Matt Keeler ec9934b6f8 Remaining ACL Unit Tests (#4852)
* Add leader token upgrade test and fix various ACL enablement bugs

* Update the leader ACL initialization tests.

* Add a StateStore ACL tests for ACLTokenSet and ACLTokenGetBy* functions

* Advertise the agents acl support status with the agent/self endpoint.

* Make batch token upsert CAS’able to prevent consistency issues with token auto-upgrade

* Finish up the ACL state store token tests

* Finish the ACL state store unit tests

Also rename some things to make them more consistent.

* Do as much ACL replication testing as I can.
2018-10-31 13:00:46 -07:00
Kyle Havlovitz 58ff5e46cb fsm: add missing ID/datacenter to persistNodes 2018-10-30 15:52:54 -07:00
Matt Keeler df507a4a55 A few misc fixes found by go vet 2018-10-19 12:28:36 -04:00
Matt Keeler 99e0a124cb
New ACLs (#4791)
This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week.
Description

At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers.

On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though.

    Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though.
    All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management.
    Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are:
        A server running the new system must still support other clients using the legacy system.
        A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system.
        The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode.

So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 12:04:07 -04:00
Aestek 260a9880ae [Security] Add finer control over script checks (#4715)
* Add -enable-local-script-checks options

These options allow for a finer control over when script checks are enabled by
giving the option to only allow them when they are declared from the local
file system.

* Add documentation for the new option

* Nitpick doc wording
2018-10-11 13:22:11 +01:00
Kyle Havlovitz 26a21df014
Merge branch 'master' into ca-snapshot-fix 2018-08-16 13:00:54 -07:00
nickmy9729 43a68822e3 Added code to allow snapshot inclusion of NodeMeta (#4527) 2018-08-16 15:33:35 -04:00
Kyle Havlovitz 880eccb502
fsm: add missing CA config to snapshot/restore logic 2018-08-16 11:58:50 -07:00
Kyle Havlovitz f9a35a9338
connect: add provider state to snapshots 2018-07-11 11:34:49 -07:00
Mitchell Hashimoto 2dfca5dbc2
agent/consul/fsm,state: snapshot/restore for CA roots 2018-06-14 09:41:52 -07:00
Mitchell Hashimoto f07340e94f
agent/consul/fsm,state: snapshot/restore for intentions 2018-06-14 09:41:44 -07:00
Kyle Havlovitz 8546a1d3c6
Move autopilot to a standalone package 2017-12-11 16:45:33 -08:00
James Phillips c4bc89a187
Creates a registration mechanism for snapshot and restore. 2017-11-29 18:36:53 -08:00