Commit Graph

60 Commits

Author SHA1 Message Date
DanStough f690d299c9 feat: convert destination address to slice 2022-07-25 12:31:58 -04:00
DanStough 37694eefb5 feat: tgtwy xDS generation for destinations
Signed-off-by: Dhia Ayachi <dhia@hashicorp.com>
2022-06-16 16:17:49 -04:00
R.B. Boyer c855df87ec
remove remaining shim runStep functions (#13015)
Wraps up the refactor from #13013
2022-05-10 16:24:45 -05:00
R.B. Boyer 9ad10318cd
add general runstep test helper instead of copying it all over the place (#13013) 2022-05-10 15:25:51 -05:00
Mark Anderson ed3e42296d Fixup acl.EnterpriseMeta
Signed-off-by: Mark Anderson <manderson@hashicorp.com>
2022-04-05 15:11:49 -07:00
Eric Haberkorn 45312886fe Code review changes 2022-03-07 14:39:33 -05:00
Eric 3d46f9ef7c Add `Meta` to `ServiceConfigResponse` 2022-03-07 10:05:18 -05:00
R.B. Boyer b63a0f3909
reduce flakiness/raciness of errNotFound and errNotChanged blocking query tests (#12518)
Improves tests from #12362

These tests try to setup the following concurrent scenario:

1. (goroutine 1) execute read RPC with index=0
2. (goroutine 1) get response from (1) @ index=10
3. (goroutine 1) execute read RPC with index=10 and block
4. (goroutine 2) WHILE (3) is blocking, start slamming the system with stray writes that will cause the WatchSet to wakeup
5. (goroutine 2) after doing all writes, shut down the reader above
6. (goroutine 1) stops reading, double checks that it only ever woke up once (from 1)
2022-03-04 11:20:01 -06:00
R.B. Boyer 3804677570
server: suppress spurious blocking query returns where multiple config entries are involved (#12362)
Starting from and extending the mechanism introduced in #12110 we can specially handle the 3 main special Consul RPC endpoints that react to many config entries in a single blocking query in Connect:

- `DiscoveryChain.Get`
- `ConfigEntry.ResolveServiceConfig`
- `Intentions.Match`

All of these will internally watch for many config entries, and at least one of those will likely be not found in any given query. Because these are blends of multiple reads the exact solution from #12110 isn't perfectly aligned, but we can tweak the approach slightly and regain the utility of that mechanism.

### No Config Entries Found

In this case, despite looking for many config entries none may be found at all. Unlike #12110 in this scenario we do not return an empty reply to the caller, but instead synthesize a struct from default values to return. This can be handled nearly identically to #12110 with the first 1-2 replies being non-empty payloads followed by the standard spurious wakeup suppression mechanism from #12110.

### No Change Since Last Wakeup

Once a blocking query loop on the server has completed and slept at least once, there is a further optimization we can make here to detect if any of the config entries that were present at specific versions for the prior execution of the loop are identical for the loop we just woke up for. In that scenario we can return a slightly different internal sentinel error and basically externally handle it similar to #12110.

This would mean that even if 20 discovery chain read RPC handling goroutines wakeup due to the creation of an unrelated config entry, the only ones that will terminate and reply with a blob of data are those that genuinely have new data to report.

### Extra Endpoints

Since this pattern is pretty reusable, other key config-entry-adjacent endpoints used by `agent/proxycfg` also were updated:

- `ConfigEntry.List`
- `Internal.IntentionUpstreams` (tproxy)
2022-02-25 15:46:34 -06:00
Daniel Nephin bdafa24c50 Make blockingQuery efficient with 'not found' results.
By using the query results as state.

Blocking queries are efficient when the query matches some results,
because the ModifyIndex of those results, returned as queryMeta.Mindex,
will never change unless the items themselves change.

Blocking queries for non-existent items are not efficient because the
queryMeta.Index can (and often does) change when other entities are
written.

This commit reduces the churn of these queries by using a different
comparison for "has changed". Instead of using the modified index, we
use the existence of the results. If the previous result was "not found"
and the new result is still "not found", we know we can ignore the
modified index and continue to block.

This is done by setting the minQueryIndex to the returned
queryMeta.Index, which prevents the query from returning before a state
change is observed.
2022-02-15 18:24:33 -05:00
Daniel Nephin 6e73df7dc2 Add a test for blocking query on non-existent entry
This test shows how blocking queries are not efficient when the query
returns no results.  The test fails with 100+ calls instead of the
expected 2.

This test is still a bit flaky because it depends on the timing of the
writes. It can sometimes return 3 calls.

A future commit should fix this and make blocking queries even more
optimal for not-found results.
2022-02-15 18:23:17 -05:00
R.B. Boyer b216d52b66
server: conditionally avoid writing a config entry to raft if it was already the same (#12321)
This will both save on unnecessary raft operations as well as
unnecessarily incrementing the raft modify index of config entries
subject to no-op updates.
2022-02-14 14:39:12 -06:00
FFMMM 1f8fb17be7
Vendor in rpc mono repo for net/rpc fork, go-msgpack, msgpackrpc. (#12311)
This commit syncs ENT changes to the OSS repo.

Original commit details in ENT:

```
commit 569d25f7f4578981c3801e6e067295668210f748
Author: FFMMM <FFMMM@users.noreply.github.com>
Date:   Thu Feb 10 10:23:33 2022 -0800

    Vendor fork net rpc (#1538)

    * replace net/rpc w consul-net-rpc/net/rpc

    Signed-off-by: FFMMM <FFMMM@users.noreply.github.com>

    * replace msgpackrpc and go-msgpack with fork from mono repo

    Signed-off-by: FFMMM <FFMMM@users.noreply.github.com>

    * gofmt all files touched

    Signed-off-by: FFMMM <FFMMM@users.noreply.github.com>
```

Signed-off-by: FFMMM <FFMMM@users.noreply.github.com>
2022-02-14 09:45:45 -08:00
R.B. Boyer 05c7373a28 bulk rewrite using this script
set -euo pipefail

    unset CDPATH

    cd "$(dirname "$0")"

    for f in $(git grep '\brequire := require\.New(' | cut -d':' -f1 | sort -u); do
        echo "=== require: $f ==="
        sed -i '/require := require.New(t)/d' $f
        # require.XXX(blah) but not require.XXX(tblah) or require.XXX(rblah)
        sed -i 's/\brequire\.\([a-zA-Z0-9_]*\)(\([^tr]\)/require.\1(t,\2/g' $f
        # require.XXX(tblah) but not require.XXX(t, blah)
        sed -i 's/\brequire\.\([a-zA-Z0-9_]*\)(\(t[^,]\)/require.\1(t,\2/g' $f
        # require.XXX(rblah) but not require.XXX(r, blah)
        sed -i 's/\brequire\.\([a-zA-Z0-9_]*\)(\(r[^,]\)/require.\1(t,\2/g' $f
        gofmt -s -w $f
    done

    for f in $(git grep '\bassert := assert\.New(' | cut -d':' -f1 | sort -u); do
        echo "=== assert: $f ==="
        sed -i '/assert := assert.New(t)/d' $f
        # assert.XXX(blah) but not assert.XXX(tblah) or assert.XXX(rblah)
        sed -i 's/\bassert\.\([a-zA-Z0-9_]*\)(\([^tr]\)/assert.\1(t,\2/g' $f
        # assert.XXX(tblah) but not assert.XXX(t, blah)
        sed -i 's/\bassert\.\([a-zA-Z0-9_]*\)(\(t[^,]\)/assert.\1(t,\2/g' $f
        # assert.XXX(rblah) but not assert.XXX(r, blah)
        sed -i 's/\bassert\.\([a-zA-Z0-9_]*\)(\(r[^,]\)/assert.\1(t,\2/g' $f
        gofmt -s -w $f
    done
2022-01-20 10:46:23 -06:00
Dan Upton 8bc11b08dc
Rename `ACLMasterToken` => `ACLInitialManagementToken` (#11746) 2021-12-07 12:39:28 +00:00
freddygv 02fb323652 Rename partition-exports to exported-services
Using a name less tied to partitions gives us more flexibility to use
this config entry in OSS for exports between datacenters/meshes.
2021-12-03 17:47:31 -07:00
Dan Upton 1d571bb503
config: support `ResultsFilteredByACLs` in list/list all endpoints (#11621) 2021-12-03 17:39:47 +00:00
freddygv 739490df12 handle error scenario of empty local DC 2021-11-09 16:42:42 -07:00
freddygv b9b41625b9 Restrict DC for partition-exports writes
There are two restrictions:
- Writes from the primary DC which explicitly target a secondary DC.
- Writes to a secondary DC that do not explicitly target the primary DC.

The first restriction is because the config entry is not supported in
secondary datacenters.

The second restriction is to prevent the scenario where a user writes
the config entry to a secondary DC, the write gets forwarded to the
primary, but then the config entry does not apply in the secondary.
This makes the scope more explicit.
2021-11-09 16:42:42 -07:00
Daniel Upton a620b6be2e
Support Check-And-Set deletion of config entries (#11419)
Implements #11372
2021-11-01 16:42:01 +00:00
Daniel Nephin b639f47e3c config: use the new ACL system in tests
In preparation for removing ACL.Apply
2021-09-21 17:57:29 -04:00
Daniel Nephin 75baa22e64 acl: remove ACLResolver config fields from consul.Config 2021-08-17 13:32:52 -04:00
Daniel Nephin 047abdd73c acl: remove ACLDatacenter
This field has been unnecessary for a while now. It was always set to the same value
as PrimaryDatacenter. So we can remove the duplicate field and use PrimaryDatacenter
directly.

This change was made by GoLand refactor, which did most of the work for me.
2021-08-06 18:27:00 -04:00
R.B. Boyer 62ac98b564
agent/structs: add a bunch more EnterpriseMeta helper functions to help with partitioning (#10669) 2021-07-22 13:20:45 -05:00
Freddy 61ae2995b7
Add flag for transparent proxies to dial individual instances (#10329) 2021-06-09 14:34:17 -06:00
R.B. Boyer b90877b440
server: ensure that central service config flattening properly resets the state each time (#10239)
The prior solution to call reply.Reset() aged poorly since newer fields
were added to the reply, but not added to Reset() leading serial
blocking query loops on the server to blend replies.

This could manifest as a service-defaults protocol change from
default=>http not reverting back to default after the config entry
reponsible was deleted.
2021-05-14 10:21:44 -05:00
R.B. Boyer c88512fe14
connect: update centralized upstreams representation in service-defaults (#10015) 2021-04-15 14:21:44 -05:00
freddygv eeccba945d Replace TransparentProxy bool with ProxyMode
This PR replaces the original boolean used to configure transparent
proxy mode. It was replaced with a string mode that can be set to:

- "": Empty string is the default for when the setting should be
defaulted from other configuration like config entries.
- "direct": Direct mode is how applications originally opted into the
mesh. Proxy listeners need to be dialed directly.
- "transparent": Transparent mode enables configuring Envoy as a
transparent proxy. Traffic must be captured and redirected to the
inbound and outbound listeners.

This PR also adds a struct for transparent proxy specific configuration.
Initially this is not stored as a pointer. Will revisit that decision
before GA.
2021-04-12 09:35:14 -06:00
freddygv a1fd3b0271 Pass down upstream defaults to client proxies
This is needed in case the client proxy is in TransparentProxy mode.
Typically they won't have explicit configuration for every upstream, so
this ensures the settings can be applied to all of them when generating
xDS config.
2021-04-07 09:32:47 -06:00
freddygv b56bd690aa Fixup enterprise tests from tproxy changes 2021-03-17 23:05:00 -06:00
Freddy 63dcb7fa76
Add TransparentProxy option to proxy definitions 2021-03-17 17:01:45 -06:00
freddygv 940b7a98d1 Finish cleanup from ServiceConfigRequest changes 2021-03-15 16:38:01 -06:00
freddygv 04fbc104cd Pass MeshGateway config in service config request
ResolveServiceConfig is called by service manager before the proxy
registration is in the catalog. Therefore we should pass proxy
registration flags in the request rather than trying to fetch
them from the state store (where they may not exist yet).
2021-03-15 14:32:13 -06:00
freddygv 7a3625f58b Add TransparentProxy opt to proxy definition 2021-03-11 11:37:21 -07:00
freddygv c30157d2f2 Turn Limits and PassiveHealthChecks into pointers 2021-03-11 11:04:40 -07:00
freddygv b98abb6f09 Update server-side config resolution and client-side merging 2021-03-10 21:05:11 -07:00
Daniel Nephin f929a7117e state: Remove unnecessary entMeta arg to EnsureConfigEntry 2021-02-03 18:10:38 -05:00
Daniel Nephin ef0999547a testing: skip slow tests with -short
Add a skip condition to all tests slower than 100ms.

This change was made using `gotestsum tool slowest` with data from the
last 3 CI runs of master.
See https://github.com/gotestyourself/gotestsum#finding-and-skipping-slow-tests

With this change:

```
$ time go test -count=1 -short ./agent
ok      github.com/hashicorp/consul/agent       0.743s

real    0m4.791s

$ time go test -count=1 -short ./agent/consul
ok      github.com/hashicorp/consul/agent/consul        4.229s

real    0m8.769s
```
2020-12-07 13:42:55 -05:00
R.B. Boyer d6dce2332a
connect: intentions are now managed as a new config entry kind "service-intentions" (#8834)
- Upgrade the ConfigEntry.ListAll RPC to be kind-aware so that older
copies of consul will not see new config entries it doesn't understand
replicate down.

- Add shim conversion code so that the old API/CLI method of interacting
with intentions will continue to work so long as none of these are
edited via config entry endpoints. Almost all of the read-only APIs will
continue to function indefinitely.

- Add new APIs that operate on individual intentions without IDs so that
the UI doesn't need to implement CAS operations.

- Add a new serf feature flag indicating support for
intentions-as-config-entries.

- The old line-item intentions way of interacting with the state store
will transparently flip between the legacy memdb table and the config
entry representations so that readers will never see a hiccup during
migration where the results are incomplete. It uses a piece of system
metadata to control the flip.

- The primary datacenter will begin migrating intentions into config
entries on startup once all servers in the datacenter are on a version
of Consul with the intentions-as-config-entries feature flag. When it is
complete the old state store representations will be cleared. We also
record a piece of system metadata indicating this has occurred. We use
this metadata to skip ALL of this code the next time the leader starts
up.

- The secondary datacenters continue to run the old intentions
replicator until all servers in the secondary DC and primary DC support
intentions-as-config-entries (via serf flag). Once this condition it met
the old intentions replicator ceases.

- The secondary datacenters replicate the new config entries as they are
migrated in the primary. When they detect that the primary has zeroed
it's old state store table it waits until all config entries up to that
point are replicated and then zeroes its own copy of the old state store
table. We also record a piece of system metadata indicating this has
occurred. We use this metadata to skip ALL of this code the next time
the leader starts up.
2020-10-06 13:24:05 -05:00
Daniel Nephin 89d95561df Enable gofmt simplify
Code changes done automatically with 'gofmt -s -w'
2020-06-16 13:21:11 -04:00
R.B. Boyer 16db20b1f3
acl: remove the deprecated `acl_enforce_version_8` option (#7991)
Fixes #7292
2020-05-29 16:16:03 -05:00
R.B. Boyer 7e42819a71
connect: ensure proxy-defaults protocol is used for upstreams (#7938) 2020-05-21 16:08:39 -05:00
Matt Keeler 485a0a65ea
Updates to Config Entries and Connect for Namespaces (#7116) 2020-01-24 10:04:58 -05:00
Freddy 5eace88ce2
Expose HTTP-based paths through Connect proxy (#6446)
Fixes: #5396

This PR adds a proxy configuration stanza called expose. These flags register
listeners in Connect sidecar proxies to allow requests to specific HTTP paths from outside of the node. This allows services to protect themselves by only
listening on the loopback interface, while still accepting traffic from non
Connect-enabled services.

Under expose there is a boolean checks flag that would automatically expose all
registered HTTP and gRPC check paths.

This stanza also accepts a paths list to expose individual paths. The primary
use case for this functionality would be to expose paths for third parties like
Prometheus or the kubelet.

Listeners for requests to exposed paths are be configured dynamically at run
time. Any time a proxy, or check can be registered, a listener can also be
created.

In this initial implementation requests to these paths are not
authenticated/encrypted.
2019-09-25 20:55:52 -06:00
Matt Keeler 8cb0560f52
Ensure that config entry writes are forwarded to the primary DC (#6339) 2019-08-20 12:01:13 -04:00
R.B. Boyer f84f509ce4
connect: updating a service-defaults config entry should leave an unset protocol alone (#6342)
If the entry is updated for reasons other than protocol it is surprising
that the value is explicitly persisted as 'tcp' rather than leaving it
empty and letting it fall back dynamically on the proxy-defaults value.
2019-08-19 10:44:06 -05:00
R.B. Boyer 22ee60d1ba
agent: blocking central config RPCs iterations should not interfere with each other (#6316) 2019-08-14 09:08:46 -05:00
hashicorp-ci 3ac803da5e Merge Consul OSS branch 'master' at commit d84863799deca45ccf4bec5ab9f645ccae6b3aeb 2019-08-06 02:00:30 +00:00
Sarah Adams 9ed3e64510
fallback to proxy config global protocol when upstream services' protocol is unset (#6277)
fallback to proxy config global protocol when upstream services' protocol is unset

Fixes #5857
2019-08-05 12:52:35 -07:00
Matt Keeler 39bb0e3e77 Implement Mesh Gateways
This includes both ingress and egress functionality.
2019-07-01 16:28:30 -04:00