Commit Graph

43 Commits

Author SHA1 Message Date
Dhia Ayachi eb19271fd7
add partition to SNI when partition is non default (#10917) 2021-09-01 10:35:39 -04:00
Mark Anderson 10963d0cbd Add support for downstreams
Enhance config by adding SocketPath and LocalSocketPath config values

Supports syntax of the form:
```
services {
  name = "sock_forwarder"
  id = "sock_forwarder.1"
  socket_path = "/tmp/downstream_3.sock"
  connect {
    sidecar_service {
      proxy {
	local_service_socket_path = "/tmp/downstream.sock"
      }
    }
  }
}
```

Signed-off-by: Mark Anderson <manderson@hashicorp.com>
2021-05-04 12:41:43 -07:00
R.B. Boyer 91bee6246f
Support Incremental xDS mode (#9855)
This adds support for the Incremental xDS protocol when using xDS v3. This is best reviewed commit-by-commit and will not be squashed when merged.

Union of all commit messages follows to give an overarching summary:

xds: exclusively support incremental xDS when using xDS v3

Attempts to use SoTW via v3 will fail, much like attempts to use incremental via v2 will fail.
Work around a strange older envoy behavior involving empty CDS responses over incremental xDS.
xds: various cleanups and refactors that don't strictly concern the addition of incremental xDS support

Dissolve the connectionInfo struct in favor of per-connection ResourceGenerators instead.
Do a better job of ensuring the xds code uses a well configured logger that accurately describes the connected client.
xds: pull out checkStreamACLs method in advance of a later commit

xds: rewrite SoTW xDS protocol tests to use protobufs rather than hand-rolled json strings

In the test we very lightly reuse some of the more boring protobuf construction helper code that is also technically under test. The important thing of the protocol tests is testing the protocol. The actual inputs and outputs are largely already handled by the xds golden output tests now so these protocol tests don't have to do double-duty.

This also updates the SoTW protocol test to exclusively use xDS v2 which is the only variant of SoTW that will be supported in Consul 1.10.

xds: default xds.Server.AuthCheckFrequency at use-time instead of construction-time
2021-04-29 13:54:05 -05:00
freddygv 6c43195e2a Merge master and fix upstream config protocol defaulting 2021-03-17 21:13:40 -06:00
freddygv 9256d09255 Handle prepared queries in Upstreams loop and escape hatches in disco chain loop 2021-03-17 15:17:43 -06:00
freddygv 5b59780431 Update xds for transparent proxy 2021-03-17 13:40:49 -06:00
freddygv d90240d367 Restore old Envoy prefix on escape hatches
This is done because after removing ID and NodeName from
ServiceConfigRequest we will no longer know whether a request coming in
is for a Consul client earlier than v1.10.
2021-03-15 14:12:57 -06:00
freddygv 68148a1dae finish moving UpstreamConfig and related fields to structs pkg 2021-03-10 21:04:13 -07:00
R.B. Boyer 503041f216
xds: default to speaking xDS v3, but allow for v2 to be spoken upon request (#9658)
- Also add support for envoy 1.17.0
2021-02-26 16:23:15 -06:00
R.B. Boyer cdc5e99184
xds: remove deprecated usages of xDS (#9602)
Note that this does NOT upgrade to xDS v3. That will come in a future PR.

Additionally:

- Ignored staticcheck warnings about how github.com/golang/protobuf is deprecated.
- Shuffled some agent/xds imports in advance of a later xDS v3 upgrade.
- Remove support for envoy 1.13.x but don't add in 1.17.x yet. We have to wait until the xDS v3 support is added in a follow-up PR.

Fixes #8425
2021-02-22 15:00:15 -06:00
R.B. Boyer 6e3d07c995
xds: version sniff envoy and switch regular expressions from 'regex' to 'safe_regex' on newer envoy versions (#8222)
- cut down on extra node metadata transmission
- split the golden file generation to compare all envoy version
2020-07-09 17:04:51 -05:00
Daniel Nephin 07c1081d39 Fix a bunch of unparam lint issues 2020-06-24 13:00:14 -04:00
R.B. Boyer ba83b52b32
connect: upgrade github.com/envoyproxy/go-control-plane to v0.9.5 (#8165) 2020-06-23 15:19:56 -05:00
freddygv 1e7e716742 Move compound service names to use ServiceName type 2020-06-12 13:47:43 -06:00
Freddy f759a48726
Enable gateways to resolve hostnames to IPv4 addresses (#7999)
The DNS resolution will be handled by Envoy and defaults to LOGICAL_DNS. This discovery type can be overridden on a per-gateway basis with the envoy_dns_discovery_type Gateway Option.

If a service contains an instance with a hostname as an address we set the Envoy cluster to use DNS as the discovery type rather than EDS. Since both mesh gateways and terminating gateways route to clusters using SNI, whenever there is a mix of hostnames and IP addresses associated with a service we use the hostname + CDS rather than the IPs + EDS.

Note that we detect hostnames by attempting to parse the service instance's address as an IP. If it is not a valid IP we assume it is a hostname.
2020-06-03 15:28:45 -06:00
Raphaël Rondeau b799471e29
connect: fix endpoints clusterName when using cluster escape hatch (#7319)
```changelog
* fix(connect): fix endpoints clusterName when using cluster escape hatch
```
2020-05-26 10:57:22 +02:00
Daniel Nephin 3e76ebbd49 Remove unused var
The usage was removed in 8e22d80e3550592a32144f2d1c84ebf6becb957b,
however it seems there may be a bug here because the cluster name
is not updated when the target changes.
2020-05-19 16:50:14 -04:00
Daniel Nephin 545bd766e7 Fix a number of problems found by staticcheck
Some of these problems are minor (unused vars), but others are real bugs (ignored errors).

Co-authored-by: Matt Keeler <mkeeler@users.noreply.github.com>
2020-05-19 16:50:14 -04:00
Kyle Havlovitz e4268c8b7f Support multiple listeners referencing the same service in gateway definitions 2020-05-06 15:06:13 -05:00
Kyle Havlovitz b21cd112e5 Allow ingress gateways to route traffic based on Host header
This commit adds the necessary changes to allow an ingress gateway to
route traffic from a single defined port to multiple different upstream
services in the Consul mesh.

To do this, we now require all HTTP requests coming into the ingress
gateway to specify a Host header that matches "<service-name>.*" in
order to correctly route traffic to the correct service.

- Differentiate multiple listener's route names by port
- Adds a case in xds for allowing default discovery chains to create a
  route configuration when on an ingress gateway. This allows default
  services to easily use host header routing
- ingress-gateways have a single route config for each listener
  that utilizes domain matching to route to different services.
2020-05-06 15:06:13 -05:00
freddygv 929491c979 Add subset support 2020-04-27 11:08:40 -06:00
freddygv 2e35a9bb18 Add xds cluster/listener/endpoint management 2020-04-27 11:08:40 -06:00
Chris Piraino b8a5fbf1bf Allow ingress gateways to route through mesh gateways
- Adds integration test for mesh gateways local + remote modes with ingress
- ingress golden files updated for mesh gateway endpoints
2020-04-24 09:31:32 -05:00
Kyle Havlovitz 6a5eba63ab
Ingress Gateways for TCP services (#7509)
* Implements a simple, tcp ingress gateway workflow

This adds a new type of gateway for allowing Ingress traffic into Connect from external services.

Co-authored-by: Chris Piraino <cpiraino@hashicorp.com>
2020-04-16 14:00:48 -07:00
Daniel Nephin 6d612abbde Remove unused token parameter 2020-03-27 17:57:16 -04:00
R.B. Boyer a7fb26f50f
wan federation via mesh gateways (#6884)
This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch:

There are several distinct chunks of code that are affected:

* new flags and config options for the server

* retry join WAN is slightly different

* retry join code is shared to discover primary mesh gateways from secondary datacenters

* because retry join logic runs in the *agent* and the results of that
  operation for primary mesh gateways are needed in the *server* there are
  some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur
  at multiple layers of abstraction just to pass the data down to the right
  layer.

* new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers

* the function signature for RPC dialing picked up a new required field (the
  node name of the destination)

* several new RPCs for manipulating a FederationState object:
  `FederationState:{Apply,Get,List,ListMeshGateways}`

* 3 read-only internal APIs for debugging use to invoke those RPCs from curl

* raft and fsm changes to persist these FederationStates

* replication for FederationStates as they are canonically stored in the
  Primary and replicated to the Secondaries.

* a special derivative of anti-entropy that runs in secondaries to snapshot
  their local mesh gateway `CheckServiceNodes` and sync them into their upstream
  FederationState in the primary (this works in conjunction with the
  replication to distribute addresses for all mesh gateways in all DCs to all
  other DCs)

* a "gateway locator" convenience object to make use of this data to choose
  the addresses of gateways to use for any given RPC or gossip operation to a
  remote DC. This gets data from the "retry join" logic in the agent and also
  directly calls into the FSM.

* RPC (`:8300`) on the server sniffs the first byte of a new connection to
  determine if it's actually doing native TLS. If so it checks the ALPN header
  for protocol determination (just like how the existing system uses the
  type-byte marker).

* 2 new kinds of protocols are exclusively decoded via this native TLS
  mechanism: one for ferrying "packet" operations (udp-like) from the gossip
  layer and one for "stream" operations (tcp-like). The packet operations
  re-use sockets (using length-prefixing) to cut down on TLS re-negotiation
  overhead.

* the server instances specially wrap the `memberlist.NetTransport` when running
  with gateway federation enabled (in a `wanfed.Transport`). The general gist is
  that if it tries to dial a node in the SAME datacenter (deduced by looking
  at the suffix of the node name) there is no change. If dialing a DIFFERENT
  datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh
  gateways to eventually end up in a server's :8300 port.

* a new flag when launching a mesh gateway via `consul connect envoy` to
  indicate that the servers are to be exposed. This sets a special service
  meta when registering the gateway into the catalog.

* `proxycfg/xds` notice this metadata blob to activate additional watches for
  the FederationState objects as well as the location of all of the consul
  servers in that datacenter.

* `xds:` if the extra metadata is in place additional clusters are defined in a
  DC to bulk sink all traffic to another DC's gateways. For the current
  datacenter we listen on a wildcard name (`server.<dc>.consul`) that load
  balances all servers as well as one mini-cluster per node
  (`<node>.server.<dc>.consul`)

* the `consul tls cert create` command got a new flag (`-node`) to help create
  an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 15:59:02 -05:00
Matt Keeler 154eafe140
xDS Mesh Gateway Resolver Subset Fixes (#7294)
* xDS Mesh Gateway Resolver Subset Fixes

The first fix was that clusters were being generated for every service resolver subset regardless of there being any service instances of the associated service in that dc. The previous logic didn’t care at all but now it will omit generating those clusters unless we also have service instances that should be proxied.

The second fix was to respect the DefaultSubset of a service resolver so that mesh-gateways would configure the endpoints of the unnamed subset cluster to only those endpoints matched by the default subsets filters.

* Refactor the gateway endpoint generation to be a little easier to read
2020-02-19 11:57:55 -05:00
Matt Keeler 485a0a65ea
Updates to Config Entries and Connect for Namespaces (#7116) 2020-01-24 10:04:58 -05:00
R.B. Boyer 0675e0606e
connect: generate the full SNI names for discovery targets in the compiler rather than in the xds package (#6340) 2019-08-19 13:03:03 -05:00
R.B. Boyer 64fc002e03
connect: fix failover through a mesh gateway to a remote datacenter (#6259)
Failover is pushed entirely down to the data plane by creating envoy
clusters and putting each successive destination in a different load
assignment priority band. For example this shows that normally requests
go to 1.2.3.4:8080 but when that fails they go to 6.7.8.9:8080:

- name: foo
  load_assignment:
    cluster_name: foo
    policy:
      overprovisioning_factor: 100000
    endpoints:
    - priority: 0
      lb_endpoints:
      - endpoint:
          address:
            socket_address:
              address: 1.2.3.4
              port_value: 8080
    - priority: 1
      lb_endpoints:
      - endpoint:
          address:
            socket_address:
              address: 6.7.8.9
              port_value: 8080

Mesh gateways route requests based solely on the SNI header tacked onto
the TLS layer. Envoy currently only lets you configure the outbound SNI
header at the cluster layer.

If you try to failover through a mesh gateway you ideally would
configure the SNI value per endpoint, but that's not possible in envoy
today.

This PR introduces a simpler way around the problem for now:

1. We identify any target of failover that will use mesh gateway mode local or
   remote and then further isolate any resolver node in the compiled discovery
   chain that has a failover destination set to one of those targets.

2. For each of these resolvers we will perform a small measurement of
   comparative healths of the endpoints that come back from the health API for the
   set of primary target and serial failover targets. We walk the list of targets
   in order and if any endpoint is healthy we return that target, otherwise we
   move on to the next target.

3. The CDS and EDS endpoints both perform the measurements in (2) for the
   affected resolver nodes.

4. For CDS this measurement selects which TLS SNI field to use for the cluster
   (note the cluster is always going to be named for the primary target)

5. For EDS this measurement selects which set of endpoints will populate the
   cluster. Priority tiered failover is ignored.

One of the big downsides to this approach to failover is that the failover
detection and correction is going to be controlled by consul rather than
deferring that entirely to the data plane as with the prior version. This also
means that we are bound to only failover using official health signals and
cannot make use of data plane signals like outlier detection to affect
failover.

In this specific scenario the lack of data plane signals is ok because the
effectiveness is already muted by the fact that the ultimate destination
endpoints will have their data plane signals scrambled when they pass through
the mesh gateway wrapper anyway so we're not losing much.

Another related fix is that we now use the endpoint health from the
underlying service, not the health of the gateway (regardless of
failover mode).
2019-08-05 13:30:35 -05:00
R.B. Boyer 0165e93517
connect: expose an API endpoint to compile the discovery chain (#6248)
In addition to exposing compilation over the API cleaned up the structures that would be exchanged to be cleaner and easier to support and understand.

Also removed ability to configure the envoy OverprovisioningFactor.
2019-08-02 15:34:54 -05:00
R.B. Boyer 782c647bf4
connect: simplify the compiled discovery chain data structures (#6242)
This should make them better for sending over RPC or the API.

Instead of a chain implemented explicitly like a linked list (nodes
holding pointers to other nodes) instead switch to a flat map of named
nodes with nodes linking other other nodes by name. The shipped
structure is just a map and a string to indicate which key to start
from.

Other changes:

* inline the compiler option InferDefaults as true

* introduce compiled target config to avoid needing to send back
  additional maps of Resolvers; future target-specific compiled state
  can go here

* move compiled MeshGateway out of the Resolver and into the
  TargetConfig where it makes more sense.
2019-08-01 22:44:05 -05:00
R.B. Boyer 4666599e18
connect: reconcile how upstream configuration works with discovery chains (#6225)
* connect: reconcile how upstream configuration works with discovery chains

The following upstream config fields for connect sidecars sanely
integrate into discovery chain resolution:

- Destination Namespace/Datacenter: Compilation occurs locally but using
different default values for namespaces and datacenters. The xDS
clusters that are created are named as they normally would be.

- Mesh Gateway Mode (single upstream): If set this value overrides any
value computed for any resolver for the entire discovery chain. The xDS
clusters that are created may be named differently (see below).

- Mesh Gateway Mode (whole sidecar): If set this value overrides any
value computed for any resolver for the entire discovery chain. If this
is specifically overridden for a single upstream this value is ignored
in that case. The xDS clusters that are created may be named differently
(see below).

- Protocol (in opaque config): If set this value overrides the value
computed when evaluating the entire discovery chain. If the normal chain
would be TCP or if this override is set to TCP then the result is that
we explicitly disable L7 Routing and Splitting. The xDS clusters that
are created may be named differently (see below).

- Connect Timeout (in opaque config): If set this value overrides the
value for any resolver in the entire discovery chain. The xDS clusters
that are created may be named differently (see below).

If any of the above overrides affect the actual result of compiling the
discovery chain (i.e. "tcp" becomes "grpc" instead of being a no-op
override to "tcp") then the relevant parameters are hashed and provided
to the xDS layer as a prefix for use in naming the Clusters. This is to
ensure that if one Upstream discovery chain has no overrides and
tangentially needs a cluster named "api.default.XXX", and another
Upstream does have overrides for "api.default.XXX" that they won't
cross-pollinate against the operator's wishes.

Fixes #6159
2019-08-01 22:03:34 -05:00
Matt Keeler 7e69646a77
Fix prepared query upstream endpoint generation (#6236)
Use the correct SNI value for prepared query upstreams
2019-07-29 11:15:55 -04:00
R.B. Boyer 2bfad66efa
connect: rework how the service resolver subset OnlyPassing flag works (#6173)
The main change is that we no longer filter service instances by health,
preferring instead to render all results down into EDS endpoints in
envoy and merely label the endpoints as HEALTHY or UNHEALTHY.

When OnlyPassing is set to true we will force consul checks in a
'warning' state to render as UNHEALTHY in envoy.

Fixes #6171
2019-07-23 20:20:24 -05:00
Jack Pearkes 2b1761bab3 Make cluster names SNI always (#6081)
* Make cluster names SNI always

* Update some tests

* Ensure we check for prepared query types

* Use sni for route cluster names

* Proper mesh gateway mode defaulting when the discovery chain is used

* Ignore service splits from PatchSliceOfMaps

* Update some xds golden files for proper test output

* Allow for grpc/http listeners/cluster configs with the disco chain

* Update stats expectation
2019-07-08 12:48:48 +01:00
Matt Keeler e916f2d954 Implement mesh gateway management of service subsets
Fixup some error handling
2019-07-02 10:29:37 -04:00
R.B. Boyer bccbb2b4ae
activate most discovery chain features in xDS for envoy (#6024) 2019-07-01 22:10:51 -05:00
Matt Keeler 39bb0e3e77 Implement Mesh Gateways
This includes both ingress and egress functionality.
2019-07-01 16:28:30 -04:00
Matt Keeler b13dc6289b
Prepare for having different service kinds that are all generic… (#6013)
Default to internal error when service kind is unknown
2019-06-24 15:05:36 -04:00
Paul Banks 737be347eb
Upgrade xDS (go-control-plane) API to support Envoy 1.10. (#5872)
* Upgrade xDS (go-control-plane) API to support Envoy 1.10.

This includes backwards compatibility shim to work around the ext_authz package rename in 1.10.

It also adds integration test support in CI for 1.10.0.

* Fix go vet complaints

* go mod vendor

* Update Envoy version info in docs

* Update website/source/docs/connect/proxies/envoy.md
2019-06-07 07:10:43 -05:00
Paul Banks cf5528734c
Connect: Fix Envoy getting stuck during load (#5499)
* Connect: Fix Envoy getting stuck during load

Also in this PR:
 - Enabled outlier detection on upstreams which will mark instances unhealthy after 5 failures (using Envoy's defaults)
 - Enable weighted load balancing where DNS weights are configured

* Fix empty load assignments in the right place

* Fix import names from review

* Move millisecond parse to a helper function
2019-03-22 19:37:14 +00:00
Paul Banks 251da1077f xDS Server Implementation (#4731)
* Vendor updates for gRPC and xDS server

* xDS server implementation for serving Envoy as a Connect proxy

* Address initial review comments

* consistent envoy package aliases; typos fixed; override TLS and authz for custom listeners

* Moar Typos

* Moar typos
2018-10-10 16:55:34 +01:00