Commit Graph

68 Commits

Author SHA1 Message Date
Dan Upton 15c7c03fa5
grpc: switch servers and retry on error (#15892)
This is the OSS portion of enterprise PR 3822.

Adds a custom gRPC balancer that replicates the router's server cycling
behavior. Also enables automatic retries for RESOURCE_EXHAUSTED errors,
which we now get for free.
2023-01-05 10:21:27 +00:00
Semir Patel 1f82e82e04
Pass remote addr of incoming HTTP requests through to RPC(..) calls (#15700) 2022-12-14 09:24:22 -06:00
Chris S. Kim 4ad4cb1183
Use backport-compatible assertion (#15546)
* Use backport-compatible assertion

* Add workaround for broken apt-get
2022-11-24 11:44:20 -05:00
Chris S. Kim d146a3d542
Use rpcHoldTimeout to calculate blocking timeout (#15541)
Adds buffer to clients so that servers have time to respond to blocking queries.
2022-11-24 10:13:02 -05:00
Chris S. Kim e4c20ec190
Refactor client RPC timeouts (#14965)
Fix an issue where rpc_hold_timeout was being used as the timeout for non-blocking queries. Users should be able to tune read timeouts without fiddling with rpc_hold_timeout. A new configuration `rpc_read_timeout` is created.

Refactor some implementation from the original PR 11500 to remove the misleading linkage between RPCInfo's timeout (used to retry in case of certain modes of failures) and the client RPC timeouts.
2022-10-18 15:05:09 -04:00
Dan Upton 9fe6c33c0d
xDS Load Balancing (#14397)
Prior to #13244, connect proxies and gateways could only be configured by an
xDS session served by the local client agent.

In an upcoming release, it will be possible to deploy a Consul service mesh
without client agents. In this model, xDS sessions will be handled by the
servers themselves, which necessitates load-balancing to prevent a single
server from receiving a disproportionate amount of load and becoming
overwhelmed.

This introduces a simple form of load-balancing where Consul will attempt to
achieve an even spread of load (xDS sessions) between all healthy servers.
It does so by implementing a concurrent session limiter (limiter.SessionLimiter)
and adjusting the limit according to autopilot state and proxy service
registrations in the catalog.

If a server is already over capacity (i.e. the session limit is lowered),
Consul will begin draining sessions to rebalance the load. This will result
in the client receiving a `RESOURCE_EXHAUSTED` status code. It is the client's
responsibility to observe this response and reconnect to a different server.

Users of the gRPC client connection brokered by the
consul-server-connection-manager library will get this for free.

The rate at which Consul will drain sessions to rebalance load is scaled
dynamically based on the number of proxies in the catalog.
2022-09-09 15:02:01 +01:00
James Hartig a5a200e0e9 Use the maximum jitter when calculating the timeout
The timeout should include the maximum possible
jitter since the server will randomly add to it's
timeout a jitter. If the server's timeout is less
than the client's timeout then the client will
return an i/o deadline reached error.

Before:
```
time curl 'http://localhost:8500/v1/catalog/service/service?dc=other-dc&stale=&wait=600s&index=15820644'
rpc error making call: i/o deadline reached
real    10m11.469s
user    0m0.018s
sys     0m0.023s
```

After:
```
time curl 'http://localhost:8500/v1/catalog/service/service?dc=other-dc&stale=&wait=600s&index=15820644'
[...]
real    10m35.835s
user    0m0.021s
sys     0m0.021s
```
2022-08-17 10:24:09 -04:00
Dan Upton 34140ff3e0
grpc: rename public/private directories to external/internal (#13721)
Previously, public referred to gRPC services that are both exposed on
the dedicated gRPC port and have their definitions in the proto-public
directory (so were considered usable by 3rd parties). Whereas private
referred to services on the multiplexed server port that are only usable
by agents and other servers.

Now, we're splitting these definitions, such that external/internal
refers to the port and public/private refers to whether they can be used
by 3rd parties.

This is necessary because the peering replication API needs to be
exposed on the dedicated port, but is not (yet) suitable for use by 3rd
parties.
2022-07-13 16:33:48 +01:00
Daniel Upton 497df1ca3b proxycfg: server-local config entry data sources
This is the OSS portion of enterprise PR 2056.

This commit provides server-local implementations of the proxycfg.ConfigEntry
and proxycfg.ConfigEntryList interfaces, that source data from streaming events.

It makes use of the LocalMaterializer type introduced for peering replication,
adding the necessary support for authorization.

It also adds support for "wildcard" subscriptions (within a topic) to the event
publisher, as this is needed to fetch service-resolvers for all services when
configuring mesh gateways.

Currently, events will be emitted for just the ingress-gateway, service-resolver,
and mesh config entry types, as these are the only entries required by proxycfg
— the events will be emitted on topics named IngressGateway, ServiceResolver,
and MeshConfig topics respectively.

Though these events will only be consumed "locally" for now, they can also be
consumed via the gRPC endpoint (confirmed using grpcurl) so using them from
client agents should be a case of swapping the LocalMaterializer for an
RPCMaterializer.
2022-07-04 10:48:36 +01:00
R.B. Boyer bf647bc9d2
peering: avoid a race between peering establishment and termination (#13389) 2022-06-07 16:29:09 -05:00
R.B. Boyer 809344a6f5
peering: initial sync (#12842)
- Add endpoints related to peering: read, list, generate token, initiate peering
- Update node/service/check table indexing to account for peers
- Foundational changes for pushing service updates to a peer
- Plumb peer name through Health.ServiceNodes path

see: ENT-1765, ENT-1280, ENT-1283, ENT-1283, ENT-1756, ENT-1739, ENT-1750, ENT-1679,
     ENT-1709, ENT-1704, ENT-1690, ENT-1689, ENT-1702, ENT-1701, ENT-1683, ENT-1663,
     ENT-1650, ENT-1678, ENT-1628, ENT-1658, ENT-1640, ENT-1637, ENT-1597, ENT-1634,
     ENT-1613, ENT-1616, ENT-1617, ENT-1591, ENT-1588, ENT-1596, ENT-1572, ENT-1555

Co-authored-by: R.B. Boyer <rb@hashicorp.com>
Co-authored-by: freddygv <freddy@hashicorp.com>
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
Co-authored-by: Evan Culver <eculver@hashicorp.com>
Co-authored-by: Nitya Dhanushkodi <nitya@hashicorp.com>
2022-04-21 17:34:40 -05:00
Will Jordan 45ffdc360e
Add timeout to Client RPC calls (#11500)
Adds a timeout (deadline) to client RPC calls, so that streams will no longer hang indefinitely in unstable network conditions.

Co-authored-by: kisunji <ckim@hashicorp.com>
2022-04-21 16:21:35 -04:00
FFMMM 0f68bf879a
[rpc/middleware][consul] plumb intercept off, add server level happy test (#12692) 2022-04-06 14:33:05 -07:00
Dan Upton fb441e323a
Restructure gRPC server setup (#12586)
OSS sync of enterprise changes at 0b44395e
2022-03-22 12:40:24 +00:00
Dan Upton 57f0f42733
Support per-listener TLS configuration ⚙️ (#12504)
Introduces the capability to configure TLS differently for Consul's
listeners/ports (i.e. HTTPS, gRPC, and the internal multiplexed RPC
port) which is useful in scenarios where you may want the HTTPS or
gRPC interfaces to present a certificate signed by a well-known/public
CA, rather than the certificate used for internal communication which
must have a SAN in the form `server.<dc>.consul`.
2022-03-18 10:46:58 +00:00
FFMMM 1f8fb17be7
Vendor in rpc mono repo for net/rpc fork, go-msgpack, msgpackrpc. (#12311)
This commit syncs ENT changes to the OSS repo.

Original commit details in ENT:

```
commit 569d25f7f4578981c3801e6e067295668210f748
Author: FFMMM <FFMMM@users.noreply.github.com>
Date:   Thu Feb 10 10:23:33 2022 -0800

    Vendor fork net rpc (#1538)

    * replace net/rpc w consul-net-rpc/net/rpc

    Signed-off-by: FFMMM <FFMMM@users.noreply.github.com>

    * replace msgpackrpc and go-msgpack with fork from mono repo

    Signed-off-by: FFMMM <FFMMM@users.noreply.github.com>

    * gofmt all files touched

    Signed-off-by: FFMMM <FFMMM@users.noreply.github.com>
```

Signed-off-by: FFMMM <FFMMM@users.noreply.github.com>
2022-02-14 09:45:45 -08:00
Daniel Nephin 1a9a656a7f sdk: add TestLogLevel for setting log level in tests
And default log level to WARN.
2022-02-03 13:42:28 -05:00
Daniel Nephin 20a8e11bf2 testing: use the new freeport interfaces 2021-11-27 15:39:46 -05:00
R.B. Boyer e27e58c6cc
agent: refactor the agent delegate interface to be partition friendly (#11429) 2021-10-26 15:08:55 -05:00
R.B. Boyer 6b5a58de50
acl: some acl authz refactors for nodes (#10909) 2021-08-25 13:43:11 -05:00
R.B. Boyer a84f5fa25d
grpc: ensure that streaming gRPC requests work over mesh gateway based wan federation (#10838)
Fixes #10796
2021-08-24 16:28:44 -05:00
R.B. Boyer 254557a1f6
sync changes to oss files made in enterprise (#10670) 2021-07-22 13:58:08 -05:00
Daniel Nephin 3c60a46376 config: remove duplicate TLSConfig fields from agent/consul.Config
tlsutil.Config already presents an excellent structure for this
configuration. Copying the runtime config fields to agent/consul.Config
makes code harder to trace, and provides no advantage.

Instead of copying the fields around, use the tlsutil.Config struct
directly instead.

This is one small step in removing the many layers of duplicate
configuration.
2021-07-09 18:49:42 -04:00
Matt Keeler 82f5cb3f08 Preparation for changing where license management is done. 2021-05-24 10:19:31 -04:00
Daniel Nephin e8427a48ab agent/consuk: Rename RPCRate -> RPCRateLimit
so that the field name is consistent across config structs.
2021-01-14 17:26:00 -05:00
Daniel Nephin e5320c2db6 agent/consul: make Client/Server config reloading more obvious
I believe this commit also fixes a bug. Previously RPCMaxConnsPerClient was not being re-read from the RuntimeConfig, so passing it to Server.ReloadConfig was never changing the value.

Also improve the test runtime by not doing a lot of unnecessary work.
2021-01-14 17:21:10 -05:00
Daniel Nephin ef0999547a testing: skip slow tests with -short
Add a skip condition to all tests slower than 100ms.

This change was made using `gotestsum tool slowest` with data from the
last 3 CI runs of master.
See https://github.com/gotestyourself/gotestsum#finding-and-skipping-slow-tests

With this change:

```
$ time go test -count=1 -short ./agent
ok      github.com/hashicorp/consul/agent       0.743s

real    0m4.791s

$ time go test -count=1 -short ./agent/consul
ok      github.com/hashicorp/consul/agent/consul        4.229s

real    0m8.769s
```
2020-12-07 13:42:55 -05:00
Matt Keeler 1f40f51a58
Fix a bunch of linter warnings 2020-11-09 09:22:12 -05:00
Matt Keeler 141eb60f06
Add per-agent reconnect timeouts (#8781)
This allows for client agent to be run in a more stateless manner where they may be abruptly terminated and not expected to come back. If advertising a per-agent reconnect timeout using the advertise_reconnect_timeout configuration when that agent leaves, other agents will wait only that amount of time for the agent to come back before reaping it.

This has the advantageous side effect of causing servers to deregister the node/services/checks for that agent sooner than if the global reconnect_timeout was used.
2020-10-08 15:02:19 -04:00
Daniel Nephin 4b041a018d grpc: redeuce dependencies, unexport, and add godoc
Rename GRPCClient to ClientConnPool. This type appears to be more of a
conn pool than a client. The clients receive the connections from this
pool.

Reduce some dependencies by adjusting the interface baoundaries.

Remove the need to create a second slice of Servers, just to pick one and throw the rest away.

Unexport serverResolver, it is not used outside the package.

Use a RWMutex for ServerResolverBuilder, some locking is read-only.

Add more godoc.
2020-09-24 12:53:10 -04:00
Daniel Nephin c621b4a420 agent/consul: pass dependencies directly from agent
In an upcoming change we will need to pass a grpc.ClientConnPool from
BaseDeps into Server. While looking at that change I noticed all of the
existing consulOption fields are already on BaseDeps.

Instead of duplicating the fields, we can create a struct used by
agent/consul, and use that struct in BaseDeps. This allows us to pass
along dependencies without translating them into different
representations.

I also looked at moving all of BaseDeps in agent/consul, however that
created some circular imports. Resolving those cycles wouldn't be too
bad (it was only an error in agent/consul being imported from
cache-types), however this change seems a little better by starting to
introduce some structure to BaseDeps.

This change is also a small step in reducing the scope of Agent.

Also remove some constants that were only used by tests, and move the
relevant comment to where the live configuration is set.

Removed some validation from NewServer and NewClient, as these are not
really runtime errors. They would be code errors, which will cause a
panic anyway, so no reason to handle them specially here.
2020-09-15 17:29:32 -04:00
Daniel Nephin 0536b2047e agent/consul: make router required 2020-09-15 17:26:26 -04:00
Matt Keeler 106e1d50bd
Move RPC router from Client/Server and into BaseDeps (#8559)
This will allow it to be a shared component which is needed for AutoConfig
2020-08-27 11:23:52 -04:00
Daniel Nephin 8d35e37b3c testing: Remove all the defer os.Removeall
Now that testutil uses t.Cleanup to remove the directory the caller no longer has to manage
the removal
2020-08-14 19:58:53 -04:00
Daniel Nephin bef9348ca8 testing: remove unnecessary defers in tests
The data directory is now removed by the test helper that created it.
2020-08-07 17:28:16 -04:00
Daniel Nephin f3b63514d5 testing: Remove NotifyShutdown
NotifyShutdown was only used for testing. Now that t.Cleanup exists, we
can use that instead of attaching cleanup to the Server shutdown.

The Autopilot test which used NotifyShutdown doesn't need this
notification because Shutdown is synchronous. Waiting for the function
to return is equivalent.
2020-08-07 17:14:44 -04:00
Daniel Nephin e6c94c1411 Remove LogOutput from Server 2020-08-05 14:00:44 -04:00
Daniel Nephin fdf966896f Remove LogOutput from Client 2020-08-05 14:00:42 -04:00
Daniel Nephin 80ff174880 testutil: NewLogBuffer - buffer logs until a test fails
Replaces #7559

Running tests in parallel, with background goroutines, results in test output not being associated with the correct test. `go test` does not make any guarantees about output from goroutines being attributed to the correct test case.

Attaching log output from background goroutines also cause data races.  If the goroutine outlives the test, it will race with the test being marked done. Previously this was noticed as a panic when logging, but with the race detector enabled it is shown as a data race.

The previous solution did not address the problem of correct test attribution because test output could still be hidden when it was associated with a test that did not fail. You would have to look at all of the log output to find the relevant lines. It also made debugging test failures more difficult because each log line was very long.

This commit attempts a new approach. Instead of printing all the logs, only print when a test fails. This should work well when there are a small number of failures, but may not work well when there are many test failures at the same time. In those cases the failures are unlikely a result of a specific test, and the log output is likely less useful.

All of the logs are printed from the test goroutine, so they should be associated with the correct test.

Also removes some test helpers that were not used, or only had a single caller. Packages which expose many functions with similar names can be difficult to use correctly.

Related:
https://github.com/golang/go/issues/38458 (may be fixed in go1.15)
https://github.com/golang/go/issues/38382#issuecomment-612940030
2020-07-21 12:50:40 -04:00
Hans Hasselberg dd8cd9bc24
Merge pull request #7966 from hashicorp/pool_improvements
Agent connection pool cleanup
2020-06-04 08:56:26 +02:00
Hans Hasselberg 9ef44ec3da pool: remove version
The version field has been used to decide which multiplexing to use. It
was introduced in 2457293dceec95ecd12ef4f01442e13710ea131a. But this is
6y ago and there is no need for this differentiation anymore.
2020-05-28 23:06:01 +02:00
Daniel Nephin ea6c2b2adc ci: Add staticcheck and fix most errors
Three of the checks are temporarily disabled to limit the size of the
diff, and allow us to enable all the other checks in CI.

In a follow up we can fix the issues reported by the other checks one
at a time, and enable them.
2020-05-28 11:59:58 -04:00
Pierre Souchay 3b548f0d77
Allow to restrict servers that can join a given Serf Consul cluster. (#7628)
Based on work done in https://github.com/hashicorp/memberlist/pull/196
this allows to restrict the IP ranges that can join a given Serf cluster
and be a member of the cluster.

Restrictions on IPs can be done separatly using 2 new differents flags
and config options to restrict IPs for LAN and WAN Serf.
2020-05-20 11:31:19 +02:00
Hans Hasselberg 6626cb69d6
rpc: oss changes for network area connection pooling (#7735) 2020-04-30 22:12:17 +02:00
Matt Keeler 4b1b42cef5
A couple testing helper updates (#7694) 2020-04-27 12:17:38 -04:00
Daniel Nephin ebb851f32d agent: Remove unused Encrypted from interface
It appears to be unused. It looks like it has been around a while,
I geuss at some point we stopped using this method.
2020-03-26 12:34:31 -04:00
R.B. Boyer a7fb26f50f
wan federation via mesh gateways (#6884)
This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch:

There are several distinct chunks of code that are affected:

* new flags and config options for the server

* retry join WAN is slightly different

* retry join code is shared to discover primary mesh gateways from secondary datacenters

* because retry join logic runs in the *agent* and the results of that
  operation for primary mesh gateways are needed in the *server* there are
  some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur
  at multiple layers of abstraction just to pass the data down to the right
  layer.

* new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers

* the function signature for RPC dialing picked up a new required field (the
  node name of the destination)

* several new RPCs for manipulating a FederationState object:
  `FederationState:{Apply,Get,List,ListMeshGateways}`

* 3 read-only internal APIs for debugging use to invoke those RPCs from curl

* raft and fsm changes to persist these FederationStates

* replication for FederationStates as they are canonically stored in the
  Primary and replicated to the Secondaries.

* a special derivative of anti-entropy that runs in secondaries to snapshot
  their local mesh gateway `CheckServiceNodes` and sync them into their upstream
  FederationState in the primary (this works in conjunction with the
  replication to distribute addresses for all mesh gateways in all DCs to all
  other DCs)

* a "gateway locator" convenience object to make use of this data to choose
  the addresses of gateways to use for any given RPC or gossip operation to a
  remote DC. This gets data from the "retry join" logic in the agent and also
  directly calls into the FSM.

* RPC (`:8300`) on the server sniffs the first byte of a new connection to
  determine if it's actually doing native TLS. If so it checks the ALPN header
  for protocol determination (just like how the existing system uses the
  type-byte marker).

* 2 new kinds of protocols are exclusively decoded via this native TLS
  mechanism: one for ferrying "packet" operations (udp-like) from the gossip
  layer and one for "stream" operations (tcp-like). The packet operations
  re-use sockets (using length-prefixing) to cut down on TLS re-negotiation
  overhead.

* the server instances specially wrap the `memberlist.NetTransport` when running
  with gateway federation enabled (in a `wanfed.Transport`). The general gist is
  that if it tries to dial a node in the SAME datacenter (deduced by looking
  at the suffix of the node name) there is no change. If dialing a DIFFERENT
  datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh
  gateways to eventually end up in a server's :8300 port.

* a new flag when launching a mesh gateway via `consul connect envoy` to
  indicate that the servers are to be exposed. This sets a special service
  meta when registering the gateway into the catalog.

* `proxycfg/xds` notice this metadata blob to activate additional watches for
  the FederationState objects as well as the location of all of the consul
  servers in that datacenter.

* `xds:` if the extra metadata is in place additional clusters are defined in a
  DC to bulk sink all traffic to another DC's gateways. For the current
  datacenter we listen on a wildcard name (`server.<dc>.consul`) that load
  balances all servers as well as one mini-cluster per node
  (`<node>.server.<dc>.consul`)

* the `consul tls cert create` command got a new flag (`-node`) to help create
  an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 15:59:02 -05:00
R.B. Boyer 5c5f21088c sdk: add freelist tracking and ephemeral port range skipping to freeport
This should cut down on test flakiness.

Problems handled:

- If you had enough parallel test cases running, the former circular
approach to handling the port block could hand out the same port to
multiple cases before they each had a chance to bind them, leading to
one of the two tests to fail.

- The freeport library would allocate out of the ephemeral port range.
This has been corrected for Linux (which should cover CI).

- The library now waits until a formerly-in-use port is verified to be
free before putting it back into circulation.
2019-09-17 14:30:43 -05:00
Alvin Huang 96c2c79908
Add fmt and vet (#5671)
* add go fmt and vet

* go fmt fixes
2019-04-25 12:26:33 -04:00
Alvin Huang aacb81a566
Merge pull request #5376 from hashicorp/fix-tests
Fix tests in prep for CircleCI Migration
2019-04-04 17:09:32 -04:00