Replace call to /agent/self with /status/leader to verify agent
reachability before initializing a watch. This endpoint is not guarded
by ACLs, and as such can be queried by any API client regardless of
their permissions.
Fixes#9353
The DebugConfig in the self endpoint can change at any time. It's not a stable API.
With the previous change to rename GRPCPort to XDSPort this command would have broken.
This commit adds the XDSPort to a stable part of the XDS api, and changes the envoy command to read
this new field.
It includes support for the old API as well, in case a newer CLI is used with an older API, and
adds a test for both cases.
The main branch is being renamed from master->main. This commit should
update all references to the main branch to the new name.
Co-Authored-By: Mike Morris <mikemorris@users.noreply.github.com>
The hcl decoding apparently uses strconv.ParseInt, which fails to parse a 64bit int.
Since hcl v1 is basically EOl, it seems unlikely we'll fix this in hcl.
Since this test is only about loading values from config files, the extra large number
doesn't seem important. Trim a few zeros from the numbers so that they parse
properly on 32bit platforms.
Also skip a slow test when -short is used.
CatalogDestinationsOnly is a passthrough that would enable dialing
addresses outside of Consul's catalog. However, when this flag is set to
true only _connect_ endpoints for services can be dialed.
This flag is being renamed to signal that non-Connect endpoints can't be
dialed by transparent proxies when the value is set to true.
* debug: remove the CLI check for debug_enabled
The API allows collecting profiles even debug_enabled=false as long as
ACLs are enabled. Remove this check from the CLI so that users do not
need to set debug_enabled=true for no reason.
Also:
- fix the API client to return errors on non-200 status codes for debug
endpoints
- improve the failure messages when pprof data can not be collected
Co-Authored-By: Dhia Ayachi <dhia@hashicorp.com>
* remove parallel test runs
parallel runs create a race condition that fail the debug tests
* snapshot the timestamp at the beginning of the capture
- timestamp used to create the capture sub folder is snapshot only at the beginning of the capture and reused for subsequent captures
- capture append to the file if it already exist
* Revert "snapshot the timestamp at the beginning of the capture"
This reverts commit c2d03346
* Refactor captureDynamic to extract capture logic for each item in a different func
* snapshot the timestamp at the beginning of the capture
- timestamp used to create the capture sub folder is snapshot only at the beginning of the capture and reused for subsequent captures
- capture append to the file if it already exist
* Revert "snapshot the timestamp at the beginning of the capture"
This reverts commit c2d03346
* Refactor captureDynamic to extract capture logic for each item in a different func
* extract wait group outside the go routine to avoid a race condition
* capture pprof in a separate go routine
* perform a single capture for pprof data for the whole duration
* add missing vendor dependency
* add a change log and fix documentation to reflect the change
* create function for timestamp dir creation and simplify error handling
* use error groups and ticker to simplify interval capture loop
* Logs, profile and traces are captured for the full duration. Metrics, Heap and Go routines are captured every interval
* refactor Logs capture routine and add log capture specific test
* improve error reporting when log test fail
* change test duration to 1s
* make time parsing in log line more robust
* refactor log time format in a const
* test on log line empty the earliest possible and return
Co-authored-by: Freddy <freddygv@users.noreply.github.com>
* rename function to captureShortLived
* more specific changelog
Co-authored-by: Paul Banks <banks@banksco.de>
* update documentation to reflect current implementation
* add test for behavior when invalid param is passed to the command
* fix argument line in test
* a more detailed description of the new behaviour
Co-authored-by: Paul Banks <banks@banksco.de>
* print success right after the capture is done
* remove an unnecessary error check
Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>
* upgraded github.com/google/pprof v0.0.0-20181206194817-3ea8567a2e57 => v0.0.0-20210601050228-01bbb1931b22
Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>
Co-authored-by: Freddy <freddygv@users.noreply.github.com>
Co-authored-by: Paul Banks <banks@banksco.de>
The intent of this struct was to prevent non-json output to stdout. With
the previous cleanup, this can now be done by simply changing the stdout
stream to io.Discard.
This is just one example of why passing around io.Writers for the
streams is better than the UI interface.
Previously this line was mixed up with logging, which made the output
quite ugly. Use the logger to output this message, instead of printing
directly to stdout.
This has the advantage that the message will be visible when json logs
are enabled.
Remove the leading whitespace on every log line. This was causing problems for
a customer because their logging system was interpretting the logs as a single
multi-line log.
The version args are static and passed in from the caller. Instead read
the static values in New.
The shutdownCh was never closed, so did nothing. Remove it as a field
and an arg.
* fix tests to use a dummy nodeName and not fail when hostname is not a valid nodeName
* remove conditional testing
* add test when node name is invalid
Normally the named pipe would buffer up to 64k, but in some cases when a
soft limit is reached, they will start only buffering up to 4k.
In either case, we should not deadlock.
This commit changes the pipe-bootstrap command to first buffer all of
stdin into the process, before trying to write it to the named pipe.
This allows the process memory to act as the buffer, instead of the
named pipe.
Also changed the order of operations in `makeBootstrapPipe`. The new
test added in this PR showed that simply buffering in the process memory
was not enough to fix the issue. We also need to ensure that the
`pipe-bootstrap` process is started before we try to write to its
stdin. Otherwise the write will still block.
Also set stdout/stderr on the subprocess, so that any errors are visible
to the user.
* debug: remove the CLI check for debug_enabled
The API allows collecting profiles even debug_enabled=false as long as
ACLs are enabled. Remove this check from the CLI so that users do not
need to set debug_enabled=true for no reason.
Also:
- fix the API client to return errors on non-200 status codes for debug
endpoints
- improve the failure messages when pprof data can not be collected
Co-Authored-By: Dhia Ayachi <dhia@hashicorp.com>
* remove parallel test runs
parallel runs create a race condition that fail the debug tests
* Add changelog
Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>
* Save exposed HTTP or GRPC ports to the agent's store
* Add those the health checks API so we can retrieve them from the API
* Change redirect-traffic command to also exclude those ports from inbound traffic redirection when expose.checks is set to true.
* Give descriptive error if auth method not found
Previously during a `consul login -method=blah`, if the auth method was not found, the
error returned would be "ACL not found". This is potentially confusing
because there may be many different ACLs involved in a login: the ACL of
the Consul client, perhaps the binding rule or the auth method.
Now the error will be "auth method blah not found", which is much easier
to debug.
No config entry needs a Kind field. It is only used to determine the Go type to
target. As we introduce new config entries (like this one) we can remove the kind field
and have the GetKind method return the single supported value.
In this case (similar to proxy-defaults) the Name field is also unnecessary. We always
use the same value. So we can omit the name field entirely.
The only thing that needed fixing up pertained to this section of the 1.18.x release notes:
> grpc_stats: the default value for stats_for_all_methods is switched from true to false, in order to avoid possible memory exhaustion due to an untrusted downstream sending a large number of unique method names. The previous default value was deprecated in version 1.14.0. This only changes the behavior when the value is not set. The previous behavior can be used by setting the value to true. This behavior change by be overridden by setting runtime feature envoy.deprecated_features.grpc_stats_filter_enable_stats_for_all_methods_by_default.
For now to maintain status-quo I'm explicitly setting `stats_for_all_methods=true` in all versions to avoid relying upon the default.
Additionally the naming of the emitted metrics for these gRPC requests changed slightly so the integration test assertions for `case-grpc` needed adjusting.
This adds support for the Incremental xDS protocol when using xDS v3. This is best reviewed commit-by-commit and will not be squashed when merged.
Union of all commit messages follows to give an overarching summary:
xds: exclusively support incremental xDS when using xDS v3
Attempts to use SoTW via v3 will fail, much like attempts to use incremental via v2 will fail.
Work around a strange older envoy behavior involving empty CDS responses over incremental xDS.
xds: various cleanups and refactors that don't strictly concern the addition of incremental xDS support
Dissolve the connectionInfo struct in favor of per-connection ResourceGenerators instead.
Do a better job of ensuring the xds code uses a well configured logger that accurately describes the connected client.
xds: pull out checkStreamACLs method in advance of a later commit
xds: rewrite SoTW xDS protocol tests to use protobufs rather than hand-rolled json strings
In the test we very lightly reuse some of the more boring protobuf construction helper code that is also technically under test. The important thing of the protocol tests is testing the protocol. The actual inputs and outputs are largely already handled by the xds golden output tests now so these protocol tests don't have to do double-duty.
This also updates the SoTW protocol test to exclusively use xDS v2 which is the only variant of SoTW that will be supported in Consul 1.10.
xds: default xds.Server.AuthCheckFrequency at use-time instead of construction-time
* Use proxy outbound port from TransparentProxyConfig if provided
* If -proxy-id is provided to the redirect-traffic command, exclude any listener ports
from inbound traffic redirection. This includes envoy_prometheus_bind_addr,
envoy_stats_bind_addr, and the ListenerPort from the Expose configuration.
* Allow users to provide additional inbound and outbound ports, outbound CIDRs
and additional user IDs to be excluded from traffic redirection.
This affects both the traffic-redirect command and the iptables SDK package.
This config entry is being renamed primarily because in k8s the name
cluster could be confusing given that the config entry applies across
federated datacenters.
Additionally, this config entry will only apply to Consul as a service
mesh, so the more generic "cluster" name is not needed.
* CLI: Add support for reading internal raft snapshots to snapshot inspect
* Add snapshot inspect test for raw state files
* Add changelog entry
* Update .changelog/10089.txt
This way we avoid serializing these when empty. Otherwise users of the
latest version of the api submodule cannot interact with older versions
of Consul, because a new api client would send keys that the older Consul
doesn't recognize yet.
This PR replaces the original boolean used to configure transparent
proxy mode. It was replaced with a string mode that can be set to:
- "": Empty string is the default for when the setting should be
defaulted from other configuration like config entries.
- "direct": Direct mode is how applications originally opted into the
mesh. Proxy listeners need to be dialed directly.
- "transparent": Transparent mode enables configuring Envoy as a
transparent proxy. Traffic must be captured and redirected to the
inbound and outbound listeners.
This PR also adds a struct for transparent proxy specific configuration.
Initially this is not stored as a pointer. Will revisit that decision
before GA.
* Add new consul connect redirect-traffic command for applying traffic redirection rules when Transparent Proxy is enabled.
* Add new iptables package for applying traffic redirection rules with iptables.
This is done because after removing ID and NodeName from
ServiceConfigRequest we will no longer know whether a request coming in
is for a Consul client earlier than v1.10.
Allows setting -prometheus-backend-port to configure the cluster
envoy_prometheus_bind_addr points to.
Allows setting -prometheus-scrape-path to configure which path
envoy_prometheus_bind_addr exposes metrics on.
-prometheus-backend-port is used by the consul-k8s metrics merging feature, to
configure envoy_prometheus_bind_addr to point to the merged metrics
endpoint that combines Envoy and service metrics so that one set of
annotations on a Pod can scrape metrics from the service and it's Envoy
sidecar.
-prometheus-scrape-path is used to allow configurability of the path
where prometheus metrics are exposed on envoy_prometheus_bind_addr.
Note that this does NOT upgrade to xDS v3. That will come in a future PR.
Additionally:
- Ignored staticcheck warnings about how github.com/golang/protobuf is deprecated.
- Shuffled some agent/xds imports in advance of a later xDS v3 upgrade.
- Remove support for envoy 1.13.x but don't add in 1.17.x yet. We have to wait until the xDS v3 support is added in a follow-up PR.
Fixes#8425
Currently when data is imported via `consul kv import` it overwrites
keys under the root key. Since `consul kv export` can retrieve data for
the given prefix, i.e. part of the KV tree, importing it under root may
be not what users want.
To mirror prefix behavior from export this PR adds prefix feature to the
import command that adds prefix to all keys that are imported.
This allows setting ForceWithoutCrossSigning when reconfiguring the CA
for any provider, in order to forcibly move to a new root in cases where
the old provider isn't reachable or able to cross-sign for whatever
reason.
This commit makes a number of changes that should make
TestLoad_FullConfig easier to work with, and make the test more like
real world scenarios.
* use separate files in testdata/ dir to store the config source.
Separate files are much easier to edit because editors can syntax
highlight json/hcl, and it makes strings easier to find. Previously
trying to find strings would match strings used in other tests.
* use the exported config.Load interface instead of internal NewBuilder
and BuildAndValidate.
* remove the tail config overrides, which are only necessary with
nonZero works.
This commit reduces the interface to Load() a bit, in preparation for
unexporting NewBuilder and having everything call Load.
The three arguments are reduced to a single argument by moving the other
two into the options struct.
The three return values are reduced to two by moving the RuntimeConfig
and Warnings into a LoadResult struct.
The method is only used in tests, and only exists for legacy calls.
There was one other package which used this method in tests. Export
the AddServiceRequest and a couple of its fields so the new function can
be used in those tests.
This PR is based on the previous work by @snuggie12 in PR #6825. It adds the command consul intention list to list all available intentions. The list functionality for intentions seems a bit overdue as it's just very handy. The web UI cannot list intentions outside of the default namespace, and using the API is sometimes not the friendliest option. ;)
I cherry picked snuggie12's commits who did most of the heavy lifting (thanks again @snuggie12 for your great work!). The changes in the original commit mostly still worked on the current HEAD. On top of that I added support for namespaces and fixed the docs as they are managed differently today. Also the requested changes related to the "Connect" references in the original PRs have been addressed.
Fixes#5652
Co-authored-by: Matt Hoey <mhoey05@jcu.edu>
Add a skip condition to all tests slower than 100ms.
This change was made using `gotestsum tool slowest` with data from the
last 3 CI runs of master.
See https://github.com/gotestyourself/gotestsum#finding-and-skipping-slow-tests
With this change:
```
$ time go test -count=1 -short ./agent
ok github.com/hashicorp/consul/agent 0.743s
real 0m4.791s
$ time go test -count=1 -short ./agent/consul
ok github.com/hashicorp/consul/agent/consul 4.229s
real 0m8.769s
```
This PR updates the tags that we generate for Envoy stats.
Several of these come with breaking changes, since we can't keep two stats prefixes for a filter.
* ci: stop building darwin/386 binaries
Go 1.15 drops support for 32-bit binaries on Darwin https://golang.org/doc/go1.15#darwin
* tls: ConnectionState::NegotiatedProtocolIsMutual is deprecated in Go 1.15, this value is always true
* correct error messages that changed slightly
* Completely regenerate some TLS test data
Co-authored-by: R.B. Boyer <rb@hashicorp.com>
If one isn't included, then the nil check in the formatter never fails due to an empty slice being passed in, which causes the kv output to always get printed.
Blake Covarrubias