Commit Graph

46 Commits

Author SHA1 Message Date
Paul Banks 1dd1683ed9 Header manip for split legs plumbing 2021-09-10 21:09:24 +01:00
Paul Banks f70f7b2389 Header manip for service-router plumbed through 2021-09-10 21:09:24 +01:00
Paul Banks fc2ed4cdf4 Ingress gateway header manip plumbing 2021-09-10 21:09:24 +01:00
Dhia Ayachi eb19271fd7
add partition to SNI when partition is non default (#10917) 2021-09-01 10:35:39 -04:00
Jared Kirschner 4c3b1b8b7b Replace use of 'sane' where appropriate
HashiCorp voice, style, and language guidelines recommend avoiding ableist
language unless its reference to ability is accurate in a particular use.
2021-07-02 12:18:46 -04:00
R.B. Boyer 91bee6246f
Support Incremental xDS mode (#9855)
This adds support for the Incremental xDS protocol when using xDS v3. This is best reviewed commit-by-commit and will not be squashed when merged.

Union of all commit messages follows to give an overarching summary:

xds: exclusively support incremental xDS when using xDS v3

Attempts to use SoTW via v3 will fail, much like attempts to use incremental via v2 will fail.
Work around a strange older envoy behavior involving empty CDS responses over incremental xDS.
xds: various cleanups and refactors that don't strictly concern the addition of incremental xDS support

Dissolve the connectionInfo struct in favor of per-connection ResourceGenerators instead.
Do a better job of ensuring the xds code uses a well configured logger that accurately describes the connected client.
xds: pull out checkStreamACLs method in advance of a later commit

xds: rewrite SoTW xDS protocol tests to use protobufs rather than hand-rolled json strings

In the test we very lightly reuse some of the more boring protobuf construction helper code that is also technically under test. The important thing of the protocol tests is testing the protocol. The actual inputs and outputs are largely already handled by the xds golden output tests now so these protocol tests don't have to do double-duty.

This also updates the SoTW protocol test to exclusively use xDS v2 which is the only variant of SoTW that will be supported in Consul 1.10.

xds: default xds.Server.AuthCheckFrequency at use-time instead of construction-time
2021-04-29 13:54:05 -05:00
Yong Wen Chua 85aa7f2785
Merge branch 'master' of github.com:hashicorp/consul into tg-rewrite 2021-04-06 17:05:26 +08:00
freddygv 5b59780431 Update xds for transparent proxy 2021-03-17 13:40:49 -06:00
R.B. Boyer 503041f216
xds: default to speaking xDS v3, but allow for v2 to be spoken upon request (#9658)
- Also add support for envoy 1.17.0
2021-02-26 16:23:15 -06:00
Yong Wen Chua e1820517aa
Auto Rewrite Host Headers for Terminating Gateways
Tries to partially address
https://github.com/hashicorp/consul/issues/8707
2021-02-24 16:23:39 +08:00
R.B. Boyer cdc5e99184
xds: remove deprecated usages of xDS (#9602)
Note that this does NOT upgrade to xDS v3. That will come in a future PR.

Additionally:

- Ignored staticcheck warnings about how github.com/golang/protobuf is deprecated.
- Shuffled some agent/xds imports in advance of a later xDS v3 upgrade.
- Remove support for envoy 1.13.x but don't add in 1.17.x yet. We have to wait until the xDS v3 support is added in a follow-up PR.

Fixes #8425
2021-02-22 15:00:15 -06:00
freddygv 60cb306524 Add session flag to cookie config 2020-09-11 18:34:03 -06:00
freddygv ae8c609f10 PR comments 2020-09-11 10:49:26 -06:00
freddygv 5871b667a5 Revert EnvoyConfig nesting 2020-09-11 09:21:43 -06:00
freddygv 3e4bc36941 Add server receiver to routes and log tgw err 2020-09-03 16:19:58 -06:00
freddygv 23147c1d5b Fix http assertion in route creation 2020-09-03 10:21:20 -06:00
freddygv daad3b9210 Remove LB infix and move injection to xds 2020-09-02 15:13:50 -06:00
freddygv d7bda050e0 Restructure structs and other PR comments 2020-09-02 09:10:50 -06:00
freddygv 194d34b09d Pass LB config to Envoy via xDS 2020-08-28 14:27:40 -06:00
R.B. Boyer f2b8bf109c
xds: use envoy's rbac filter to handle intentions entirely within envoy (#8569) 2020-08-27 12:20:58 -05:00
R.B. Boyer 63422ca9c5
connect: use stronger validation that ingress gateways have compatible protocols defined for their upstreams (#8470)
Fixes #8466

Since Consul 1.8.0 there was a bug in how ingress gateway protocol
compatibility was enforced. At the point in time that an ingress-gateway
config entry was modified the discovery chain for each upstream was
checked to ensure the ingress gateway protocol matched. Unfortunately
future modifications of other config entries were not validated against
existing ingress-gateway definitions, such as:

1. create tcp ingress-gateway pointing to 'api' (ok)
2. create service-defaults for 'api' setting protocol=http (worked, but not ok)
3. create service-splitter or service-router for 'api' (worked, but caused an agent panic)

If you were to do these in a different order, it would fail without a
crash:

1. create service-defaults for 'api' setting protocol=http (ok)
2. create service-splitter or service-router for 'api' (ok)
3. create tcp ingress-gateway pointing to 'api' (fail with message about
   protocol mismatch)

This PR introduces the missing validation. The two new behaviors are:

1. create tcp ingress-gateway pointing to 'api' (ok)
2. (NEW) create service-defaults for 'api' setting protocol=http ("ok" for back compat)
3. (NEW) create service-splitter or service-router for 'api' (fail with
   message about protocol mismatch)

In consideration for any existing users that may be inadvertently be
falling into item (2) above, that is now officiall a valid configuration
to be in. For anyone falling into item (3) above while you cannot use
the API to manufacture that scenario anymore, anyone that has old (now
bad) data will still be able to have the agent use them just enough to
generate a new agent/proxycfg error message rather than a panic.
Unfortunately we just don't have enough information to properly fix the
config entries.
2020-08-12 11:19:20 -05:00
R.B. Boyer 8ea4c482b3
xds: add support for envoy 1.15.0 and drop support for 1.11.x (#8424)
Related changes:

- hard-fail the xDS connection attempt if the envoy version is known to be too old to be supported
- remove the RouterMatchSafeRegex proxy feature since all supported envoy versions have it
- stop using --max-obj-name-len (due to: envoyproxy/envoy#11740)
2020-07-31 15:52:49 -05:00
R.B. Boyer 6e3d07c995
xds: version sniff envoy and switch regular expressions from 'regex' to 'safe_regex' on newer envoy versions (#8222)
- cut down on extra node metadata transmission
- split the golden file generation to compare all envoy version
2020-07-09 17:04:51 -05:00
Chris Piraino 9d92c42c90
Append port number to ingress host domain (#8190)
A port can be sent in the Host header as defined in the HTTP RFC, so we
take any hosts that we want to match traffic to and also add another
host with the listener port added.

Also fix an issue with envoy integration tests not running the
case-ingress-gateway-tls test.
2020-07-07 10:43:04 -05:00
Daniel Nephin 07c1081d39 Fix a bunch of unparam lint issues 2020-06-24 13:00:14 -04:00
R.B. Boyer ba83b52b32
connect: upgrade github.com/envoyproxy/go-control-plane to v0.9.5 (#8165) 2020-06-23 15:19:56 -05:00
Chris Piraino 5d0cb00ec3
Always require Host header values for http services (#7990)
Previously, we did not require the 'service-name.*' host header value
when on a single http service was exposed. However, this allows a user
to get into a situation where, if they add another service to the
listener, suddenly the previous service's traffic might not be routed
correctly. Thus, we always require the Host header, even if there is
only 1 service.

Also, we add the make the default domain matching more restrictive by
matching "service-name.ingress.*" by default. This lines up better with
the namespace case and more accurately matches the Consul DNS value we
expect people to use in this case.
2020-06-08 13:16:24 -05:00
Chris Piraino ff501ffb40 Correctly set a namespace label in the required domain for xds routes
If an upstream is not in the default namespace, we expect DNS requests
to be served over "<service-name>.ingress.<namespace>.*"
2020-05-06 15:06:14 -05:00
Chris Piraino d8ac79041d Re-add comment on connect-proxy virtual hosts 2020-05-06 15:06:14 -05:00
Chris Piraino 210dda5682 Allow Hosts field to be set on an ingress config entry
- Validate that this cannot be set on a 'tcp' listener nor on a wildcard
service.
- Add Hosts field to api and test in consul config write CLI
- xds: Configure envoy with user-provided hosts from ingress gateways
2020-05-06 15:06:13 -05:00
Kyle Havlovitz b21cd112e5 Allow ingress gateways to route traffic based on Host header
This commit adds the necessary changes to allow an ingress gateway to
route traffic from a single defined port to multiple different upstream
services in the Consul mesh.

To do this, we now require all HTTP requests coming into the ingress
gateway to specify a Host header that matches "<service-name>.*" in
order to correctly route traffic to the correct service.

- Differentiate multiple listener's route names by port
- Adds a case in xds for allowing default discovery chains to create a
  route configuration when on an ingress gateway. This allows default
  services to easily use host header routing
- ingress-gateways have a single route config for each listener
  that utilizes domain matching to route to different services.
2020-05-06 15:06:13 -05:00
Kyle Havlovitz d433679bd8 Add http routing support and integration test to ingress gateways 2020-04-24 09:31:32 -05:00
Daniel Nephin 6d612abbde Remove unused token parameter 2020-03-27 17:57:16 -04:00
Chris Piraino 4ec01900cd
Fixes envoy config when both RetryOn* values are set (#7280) 2020-02-18 09:25:47 -06:00
R.B. Boyer 0675e0606e
connect: generate the full SNI names for discovery targets in the compiler rather than in the xds package (#6340) 2019-08-19 13:03:03 -05:00
R.B. Boyer 0165e93517
connect: expose an API endpoint to compile the discovery chain (#6248)
In addition to exposing compilation over the API cleaned up the structures that would be exchanged to be cleaner and easier to support and understand.

Also removed ability to configure the envoy OverprovisioningFactor.
2019-08-02 15:34:54 -05:00
R.B. Boyer 782c647bf4
connect: simplify the compiled discovery chain data structures (#6242)
This should make them better for sending over RPC or the API.

Instead of a chain implemented explicitly like a linked list (nodes
holding pointers to other nodes) instead switch to a flat map of named
nodes with nodes linking other other nodes by name. The shipped
structure is just a map and a string to indicate which key to start
from.

Other changes:

* inline the compiler option InferDefaults as true

* introduce compiled target config to avoid needing to send back
  additional maps of Resolvers; future target-specific compiled state
  can go here

* move compiled MeshGateway out of the Resolver and into the
  TargetConfig where it makes more sense.
2019-08-01 22:44:05 -05:00
R.B. Boyer 4666599e18
connect: reconcile how upstream configuration works with discovery chains (#6225)
* connect: reconcile how upstream configuration works with discovery chains

The following upstream config fields for connect sidecars sanely
integrate into discovery chain resolution:

- Destination Namespace/Datacenter: Compilation occurs locally but using
different default values for namespaces and datacenters. The xDS
clusters that are created are named as they normally would be.

- Mesh Gateway Mode (single upstream): If set this value overrides any
value computed for any resolver for the entire discovery chain. The xDS
clusters that are created may be named differently (see below).

- Mesh Gateway Mode (whole sidecar): If set this value overrides any
value computed for any resolver for the entire discovery chain. If this
is specifically overridden for a single upstream this value is ignored
in that case. The xDS clusters that are created may be named differently
(see below).

- Protocol (in opaque config): If set this value overrides the value
computed when evaluating the entire discovery chain. If the normal chain
would be TCP or if this override is set to TCP then the result is that
we explicitly disable L7 Routing and Splitting. The xDS clusters that
are created may be named differently (see below).

- Connect Timeout (in opaque config): If set this value overrides the
value for any resolver in the entire discovery chain. The xDS clusters
that are created may be named differently (see below).

If any of the above overrides affect the actual result of compiling the
discovery chain (i.e. "tcp" becomes "grpc" instead of being a no-op
override to "tcp") then the relevant parameters are hashed and provided
to the xDS layer as a prefix for use in naming the Clusters. This is to
ensure that if one Upstream discovery chain has no overrides and
tangentially needs a cluster named "api.default.XXX", and another
Upstream does have overrides for "api.default.XXX" that they won't
cross-pollinate against the operator's wishes.

Fixes #6159
2019-08-01 22:03:34 -05:00
R.B. Boyer bd4a2d7be2
connect: allow L7 routers to match on http methods (#6164)
Fixes #6158
2019-07-23 20:56:39 -05:00
R.B. Boyer 67f3da61af
connect: change router syntax for matching query parameters to resemble the syntax for matching paths and headers for consistency. (#6163)
This is a breaking change, but only in the context of the beta series.
2019-07-23 20:55:26 -05:00
R.B. Boyer fc90beb925
connect: validate and test more of the L7 config entries (#6156) 2019-07-23 20:50:23 -05:00
R.B. Boyer 6759b5386b
xds: allow http match criteria to be applied to routes on services using grpc protocols (#6149) 2019-07-17 14:07:08 -05:00
R.B. Boyer 72a8195839
implement some missing service-router features and add more xDS testing (#6065)
- also implement OnlyPassing filters for non-gateway clusters
2019-07-12 14:16:21 -05:00
Jack Pearkes 2b1761bab3 Make cluster names SNI always (#6081)
* Make cluster names SNI always

* Update some tests

* Ensure we check for prepared query types

* Use sni for route cluster names

* Proper mesh gateway mode defaulting when the discovery chain is used

* Ignore service splits from PatchSliceOfMaps

* Update some xds golden files for proper test output

* Allow for grpc/http listeners/cluster configs with the disco chain

* Update stats expectation
2019-07-08 12:48:48 +01:00
R.B. Boyer bccbb2b4ae
activate most discovery chain features in xDS for envoy (#6024) 2019-07-01 22:10:51 -05:00
Paul Banks 251da1077f xDS Server Implementation (#4731)
* Vendor updates for gRPC and xDS server

* xDS server implementation for serving Envoy as a Connect proxy

* Address initial review comments

* consistent envoy package aliases; typos fixed; override TLS and authz for custom listeners

* Moar Typos

* Moar typos
2018-10-10 16:55:34 +01:00